It comes to my system and I need help...

Similar Questions

• Greetings: My turn off system and I need help 62115816

  Hello community: I have a HP laptop b216NR 2000 reads as follows (System disable 62115816) solutions.

  Hello

  Enter: 73873238

  Kind regards

  DP - K

• I upgraded my operating system and I need to reinstall Adobe Pro

  I upgraded my operating system and I need to reinstall Adobe Pro. Any help?

  Adobe is a company, do you mean Acrobat Pro?

  Insert the installation disc in the drive and follow the instructions on the screen

  Or download the Installer for other downloads

• Bluetooth problem on my new laptop HP Pavilion G series and really need help!

  I recently bought my new laptop and yesterday when trying to send a picture from my phone to it, files have not been sent, even though she said the phone and the laptop were connected, he mentioned something about Image push, but I am new to HP, so I'm not aware of what exactly is and desperately need help Please could someone help me with this, I would really appreciate that I could not yet send the file via bluetooth. Thanks in advance!

  D3,

  You said,

  "bluetooth device has not been successfully installed.

  You said,

  ""photo from my phone it it was settled, but it says ' unable to connect ' "." "

  I'm a little confused by what you say, but I do not understand 'unable to connect '.

  • It's time to go back to information I sent you and go through the installation program.
  • You can also use the HP connection manager to help you get the job done.

  Here is the Connection Manager software.  Download and install it.  Your computer already has the software, it's going to tell if the package will install...

  HP sp54945 V4.1.25.1 Connection Manager

  Once the software is installed...

  And you want to use the HP Connection Manager software.

  • Make sure that your wireless network is enabled,
  • Then look in your taskbar for your Connection Manager icon and
  • Double-click to start

  If you do not see the icon in the taskbar, you can do the following:

  Start > search / type "HP connect" >

  Click on 'Hp connection manager' when you see it in the start list

  This is a HP Connection Manager Help file.

  The document explains how to use the software to connect your Bluetooth devices (and wireless):

  Connecting to a network with the 4.x connection manager

  Good luck!

  ----------------------------------------------------------------------------------------------------------------

  When you appreciate the effort...

         Please click on the Star Bravo on the left to tell "thank you"! ""

      Is it solved? Make it easier for other people to find the answer:

  Please Mark my Post 'accept as Solution' to say "Yes!"

  Remember: the more information, help, best you , you can receive.

  Always include: (Notebook) product number , printer - model number ,.

  Operating system and a Description of the error

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• nx9105: System 16316 disabled need help what power on computer hp laptop of password

  System disabled 16316 need help working and then a code pop - up 16316 power on password can someone help me need power on password for hp compaq please

  Hello

  Enter: oirb

  or

  rcxalnd

  Kind regards

  DP - K

• whenever I load photoshop there a permanent color instead of white and I need help with fixing asap, thanks!

  whenever I load photoshop there a permanent color instead of white and I need help with fixing asap, thanks!

  It's a broken screen classic, easily corrected profile

  See this thread: https://forums.adobe.com/message/7926040#7926040

• I have adware on my mac and I need help to fix it!

  I have adware on my mac and I need help to fix it!

  Try Malwarebytes for Mac:

  https://www.Malwarebytes.org/Mac-download/

  Is fast, effective and safe.

  Do not be mislead by one who can say that it is an anti-malware application.  It would be a false increased.

  Ciao.

• I have a new computer and I need help, download of lightroom on my computer. I also want to make to the latest version

  I have a new computer and I need help, download of lightroom to my new computer. I also want to upgrade to the latest version.

  Hi Giovanniv,

  Please download and install the updates for Lightroom from following link: keeping up-to-date for Lightroom

  Concerning

  Tanuj

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• SRM and vReplication need help

  Hi all.  We're new here and desperately need help with SRM and vReplication.  We had a case open with VMware, but apparently we are a large enough customer because we've been down for more than 3 weeks with limited (and very limited) contacts with VMware.  Us running vSphere 5.0.1 with self signed certificates and try to install the SRM and vReplication.  After you have reinstalled completely vCenter Server both protected and recovery sites, we have installed SRM in both places.  Currently, we are trying to install and configure VRMS.  Even if we deploy VRMS and are able to connect to the server, the Summary tab never displays the name of the server and the VRM will not accept self signed certificates generated by vCenter and SRM.  Anyone (nothing to do with VMware) can help us.

  Hello

  The message to the attached screenshot - "local and remote servers use certificate methods of trust. ' is generated by the MIS servers due to the different configuration on both sites. I guess that SRM can be modified to use only digital fingerprint matching, but I've not done this before.

  If the VRM servers are configured differently, so that the message would be "method of trust Incompatible certificate used on the server" Server: port ".» Two VRM servers must use the same method to trust certificate. ».

  Kind regards

  Martin

• I am building a system and I need to help experts to choose the data acquisition card.

  Hello world

  I am currently working on a design project I need to take a data acquisition card that responds to the output of the amplifier. I'll build a force detection system which I have taken the following as detector and amplifier:

  http://content.Honeywell.com/sensing/Sensotec/pdf_catalog08/008834-1-EN_Model_UV%20Bridge.PDF

  http://content.Honeywell.com/sensing/Sensotec/pdf_catalog08/008638-1-EN_Model_53.PDF

  Please recommend me which data acquisition card I could take. The only requirement I ask is to have less than 0.1% global uncertainty.

  Thanks for anyone who can help

  Since your amp has - 3db at 7 kHz and you need only 10 bits 0.1% will do almost any card with.   USB-6009 is the lower end. USB-6210 the next step.

  Then take a look at some other boundary conditions: do you need it calibrated? (Is there a QM adj. who could ask questions?) Space?, EMC/noise, entry, differential

  Take a look at the USB-9237 with a conditioner bridge construction...

• last updated leads 2 force persistent ends: com.motorola.process.system and nfc

  I received an invitation to be in the impregnation Droid Turbo 2 test. I responded to the survey, but I never got an update. Now, last night, I have the update when its released to the public and made useless phone. After each restart, I get pop ups, a saying com.motoroal.process.system stopped and the other who stopped services Nfc. both are persistent even after clicking on ok, it's immediately. I can't use the phone at all.

  Should impregnation is obviously more test I go to Verizon store? I bought at Motorola.com, should I go for support of Motorola? given that I was invited to the trial of impregnation, can I put it on the soaking test forum?

  Where should I go?

  Adam Jones

  aka BaldyPal

  I've tried everything. the com.motorola.process.system popup is persistent no matter what. mode without failure, cache deleted, factory reset, can't do the settings in two modes to a time zone change, or even disable the NFC (nfc close force won't go away).

  I went to verizon, which in turn called support of motorola. They agreed to send in, reimage, then send it back. I will return to my X-Moto rocker for a week or two.

  For the record, the two parties called it a known problem. that was not very satisfying to hear knowing they pushed the update anyway. There was a test of soaking, I've even been invited, I filled out the questionnaire, but I never had the update.

  I would like 6.0.1 on this Droid 2 Turbo as soon as. I cross my fingers.

• Errror doubts to the Server primary and Standby - need help

  Hi all
  
  I have doubts or errors below. I need help to resolve all issues.
  I have successfully configured Dataguard. Now, the timing is up to date with the following parameters (using 11 g):
  
  primary:
  
  Log_archive_dest_1 =
  LOG_ARCHIVE_DEST_2 = 'SERVICE = Standby.123 arch'
  standby_file_management = auto
  
  to sandby:
  Log_archive_dest_1 =
  standby_file_management = auto
  
  
  
  Still, I face below messages in the alertliog. Can someone explain clearly all the points.
  
  
  Primary:
  ORA-1652: unable to extend temp by 640 segment in tablespace NEWTEMP
  
  I get this error when my destination archvie had filled later, we published the enough space, the archived generate. Again, I see this message once between the two. Need to solve this problem.
  
  
  Primary:
  Checkpoint is not complete (I see this message very often, want to get rid of this)
  
  
  standby time:
  kcrrvslf: active RFS of archiving for newspaper wire 1 sequence (sometimes I see this KCRRVSLF)
  
  
  
  standby time:
  Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is set to a value large enough to keep switch of newspaper afequate information to resolve gaps archivelog. (also get this message between the alertlog standby file)
  
  
  
  Standby time:
  FAL [client]: error to get the empty sequence, no specified FAL Server (it comes very often to message. How to remove it, what needs to be added. I have to add the Sub settings)
  FAL_CLIENT
  FAL_SERVER
  
  
  Thanks in advance.
  No Ministry of health
  [email protected]

  Not Moh wrote:
  DRM

  Thanks for your reply. I am convinced by your answers. I still have a few things to clarify.

  CONTROL_FILE_RECORD_KEEP_TIME
  I checked the setting, the current value is 7 days. How much should I increase. Is 15 days okay?

  It's OK with me. But then, it's your system. As I said, playing with him until you get the desired result.
  >

  kcrrvslf: active RFS of archiving for newspaper wire 1 sequence (sometimes I see this KCRRVSLF)
  You said, the above message is instructive. What is kcrrvslf mean?

  I don't know what it represents. A search on MetaLink got zero hits. A Google search got a lot of success.

  >

  FAL [client]: error to get the empty sequence, no specified FAL Server (it comes very often to message. How to remove it, what needs to be added. I have to add the Sub settings)
  We use 11g. I never used the parameter below. Can you please highlight the importance of parameters. Is it compulsory to use the parameter?
  When I see all the archives are up to date and SYNC. Always to attack, I get the message FAL [client]: error extracting sequence gap...
  FAL_CLIENT
  FAL_SERVER

  appreciate it.

  Thank you
  No Ministry of health

• I am very sorry for my experience of care and I need help from someone, because Apple does not seem to do anything.

  Whenever I try to buy anything from iTunes, he told me that my card was declined and I need to update my billing information, but the information is up-to-date and accurate. I tried to access Apple support by all means. I tried the chat system, but was immediately struck with a code error and rerouted. Then I tried to send, but it refused to let me email without an order number, but I can't HAVE a purchase order number if iTunes won't let me make an order! Then I tried to send my number so they could call me, but I got the same error as the chat system code and has been diverted again. Finally I went to the contact section to find a direct number and I called the Apple Media Helpline. Replied to automated email and when I asked to be put through a representative, the message says he understands and was changing me but as soon as he transferred it was yet ANOTHER automated message that just told me to go to the online support page, and then he hung up!

  This is outrageous. How the world am I supposed to get help with anything that either if no support really offer any type of support? The Apple store nearest is 2 hours and I won't make this drive on something that I know can be fixed with a simple phone call.

  I really, really need some help here. Please and thank you.

  What are you trying to use your payment method, credit or debit card? If it is a debit card, not all still seem to be accepted and could not be accepted at all in some countries.

  A card having a chance to be accepted it must be registered with the same name and address (including the format and spacing etc) that you have on your iTunes account and have been issued by a bank in the country where you are (and therefore the country on your iTunes account). If your card is then you have checked with the card issuer to see if they are down for use with iTunes? If they are not then you have another card you could try? Or though iTunes gift cards available in your country so that you can use them as payment?

• I did something stupid to my computer and I need help fixing it!

  Now, I've heard people use SUPERantispyware (SUPERantispyware.com) so I used it... He didn't do anything mainly because it is just an especially horrible antivirus program compared to my average so I went in this selection of repairs I can do to my computer and I have "Reset Winlogon Shell". Since I did that many permissions have been removed for access to the records and when I look in the properties of the permissions then it show that my account on this computer and admin (p.s. I'm the only account so the admin also), but then I also have these locks on a bunch of files and goes C:\users\ has not only ntuser.dat (and.. dat) Log1 and .datLOG2) but rather has also other 9 with three located in fair plugs for the real file and they all random numbers and letter after the extension. P.S. out of all those random there are three BLF and 6 REGTRANS-MS files

  I am using a Lenovo IdeaPad N580 with Win7 home premium

  I would like to use the system restore.  Here's how: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  System restore

  Ever wished that you can go back in time? With Windows, you can.

  Installation sometimes a driver or a program can make Windows run slowly or erratically. System Restore can return programs and system files from your PC to a time where everything worked, potentially prevent hours of troubleshooting of headaches. This will not affect your documents, images or other data.

  In Windows 7, you can create system restore points more and see exactly what files will be deleted or added when your PC is restored. For more information, see create a restore point.

  For more protection, use the restore system backup and restore, which is designed to help save email, photos, documents and other personal files.

  To use the system restore

  Before you start the system restore, save open files and close all programs. System Restore will restart your PC.

  1. Open system restore by clicking the start . In the search box, type restore the system and then, in the list of results, click on system restore. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Follow the steps in the wizard to select a restore point and restore your computer.

     For more information, see System Restore: frequently asked questions.

  In Windows 7 system restore can prevent headaches hours after an accident.