It did not work on Macbook white 2010 or 2010 MacBook pro installed in El Capitan and Yosemite respectively y at - it something special for these releases?

Similar Questions

• CS6 does not work on macbook pro

  I installed cs6 on my macbook pro.  will not work.  you will need to uninstall and reinstall it on an older op sys.  How to uninstall?

  Hello

  You can uninstall the Utilities/Adobe Installers folder CS6

  Kind regards

  Abhijit

• Did not use the MacBook Pro 15 "retina mid 2015 in a month

  Hey guys,.

  The title says it all, does not use my top of the line macbook pro retina 15 "with amd r9 370 x in a month and im afraid if this miight have damaged the battery.

  the last time that I used it the battery was 100% until I stopped him.

  Thank you guys. BTW, the cycle of the battery I have is 6

  Apple recommends that the computer has on a charge of 50% and the computer turn off (not asleep) when it is unused for a long period of time. I don't think the fact that you left it with a load of 100% is going to be a big problem. But if you let him sleep in now the computer have exhausted the battery and put the computer into hibernation. You may need to load for a short period until he starts if this is the case.

• When I turn on my new macbook air, the fan starts to make the strong nose. I got this less tha a month ago and I took good care of yhis. I'm tired of ressetting as MSC, but it did not work. Help, please

  When I turn on my new macbook air, the fan starts to make the strong nose. I got this less tha a month ago and I took good care of yhis. I'm tired of ressetting as MSC, but it did not work. Help, please

  If you got less than a month ago, it is still under warranty of 90 days (I think), so take it back to the Apple Store you got OR no matter what Apple Store close to you if you bought it online.

• I tried to tap three fingers on the trackpad to find the definition of a word in an article.  It did not work.  How can I put a definition of the word in an article published in El Capitan?

  I tried to tap three fingers on the trackpad to find the definition of a word in an article.  It did not work.  How can I put a definition of the word in an article published in El Capitan?  I googled this question and he said to three fingers on the trackpad, of the band which is what I tried without success.

  carolfromknoxville wrote:

  I tried to tap three fingers on the trackpad to find the definition of a word in an article.  It did not work.  How can I put a definition of the word in an article published in El Capitan?  I googled this question and he said to three fingers on the trackpad, of the band which is what I tried without success.

  Highlight the word, right-click on it and select "search... "with the white line that represents all that is the word.  It will pull up from the definition in the dictionary.

• < CFQUERYPARAM Null attribute did not work!

  Hi all!

  What I learned, cfqueryparam null attribute should be very useful for this scenario:

  < CFIF IsDefined("Form.Name") AND Form.Name NEQ "" > "".

  To do this

  < CFELSE >

  Do this

  < / CFIF >

  With the cfqueryparam null attribute, we can write a clean and elegant, code like this:

  < CFIF IsDefined("Form.Name") AND Form.Name NEQ "" > "".

  < CFQUERYPARAM cfsqltype = "cf_sql_varchar" value = "#Trim (Form.Name)" # "= null" #NOT Len (Trim (Form.Name)) # ">"

  < / CFIF >

  But when I tried on my INSERT statement, I got error message saying that the sum of the columns do not match it the values. I counted more than once

  they correspond exactly to the top.

  I modified the same insert statement with the modified values for use cfiif cfelse method, it worked. When I changed it to use cfqueryparam and its null attribute, it did not work again because if form.name is white / no, cfqueryparam has not inserted the NULL value, that is the way cfif Isdefined expression

  I have also tried using yesNoFormat and still does not work.

  Is this a bug?

  Is this a bug?

  # Your two statements are not equivalent. Unlike the first statement, the other does nothing if the field is not or is empty:

  
        create cfqueryparam
  
         do nothing  ....
  
  

  If you used to ensure the terms and CONDITIONS. Name still exists, then you can simply write:

• After updating IOS 10, hands-free BMW did not work

  After updating IOS 10, hands-free BMW did not work

  If I want to launch an appeal, all thinking looks like normally, but after 5 to 8 sek. the call will be abort. so I can't use the hands-free system!  Others with the same problem?

• button refresh Foxfire did not work when clicked on for the past two weeks

  button refresh Foxfire did not work when clicked on for the past two weeks

  Hi, see controls customize Firefox, buttons and toolbarsand click on restore default settings.

  If this does not help, Try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• moving data from Thunderbird to a new computer did not work - help, please!

  I - I hope! -followed all instructions Support of Thunderbird on moving a profile from one computer to another with a different OS (save a copy of the profile of the first computer file, download and install TB on the new computer, find the 'Profile' folder and then either paste the contents of the old profile file in the new profile file [thus overwrite the latter]) then open TB... but it didn't work.

  I then tried the same thing, but with a slightly different method: I copied the name of the new profile file, he has given the profile of the old computer file, then renamed the new file profile and pasted the old profile file - now with the new designation - in the new directory... which also did not work.

  I spent a few hours trying to get this to work and am almost to the point of giving up on tuberculosis as an e-mail.

  Any help would be welcome!

  Hi, Matt;

  Thank you for your continued support - I appreciate it!

  Yesterday, I downloaded the command-line tool dbx to eml unless you had kindly recommended (at http://code.google.com/p/undbx/ ), and, as I had supposed, its function is to do what OE itself can only do by email - that is, convert a .dbx .eml format - but do it by folder, records forever, which is much more elegant.

  The tool dbx to eml was very easy to download and use, and I could ask him to convert all my files at once (which is equivalent to more than 50 records and hundreds of emails). He did a great job, and I was able to identify the location of the output directory that results anywhere I wanted.

  Because the tool dbx to eml records records converted to any specified location, one can then import them into Thunderbird Thunderbird either on the same or another computer.

  I wanted to spend all my email OE to a new computer (which involves a passage from XP to Windows 7), and, in my case, it was easy to do because I have two computers connected by a network (intranet) data drives: after you convert all the OE dbx eml files, I went to my new computer to Thunderbird instance and , using the add-on for Thunderbird Import-ExportTools (https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/), I simply imported saved eml files, one at a time. It has worked flawlessly.

  In a situation in which two computers were not connected by a network, we could easily save the eml on a USB output directory and have computer of the new Thunderbird import eml from this location.

  I would also add that this dbx to eml command-line tool is supposed to also function as a current backup utility: it begs for find and convert new files later in OE, and it only will not do, but is also their corresponding folders in the original output folder, if they exist from a previous operation.

  I still have to import all my newly created on my Windows 7 Thunderbird eml files, but - so far - it seems like it should work smoothly.

  Based on the different methods I did research - and the few that I actually tried - has my reviews, so far, is that using the tool of command line without dbx-to-eml, at http://code.google.com/p/undbx/ , is the way simpler and more reliable to move files from email Outlook Express - within their corresponding e-mail folders - to Thunderbird , either the same or different computers.

  It would be nice if Mozilla could try this method for themselves, and - if they are to find it as infallible, as I - promote this as one of the first methods to use to move electronic mail Outlook Express to Thunderbird. It others will save a lot of time and frustration.

  Matt - your kind and generous support made it happen: thanks!

• I really hate this version 23.0 requires me to have the band to tabs. I want to remove it. I tried to install version 22 of the archive, but it did not work.

  I rarely use tabs; When I work, I prefer individual browser windows. For a single window without tabs, tabs band is clutter and space wasted. Previous versions of FF has allowed me to remove the tape to tabs in the options. Now on v.23 I can't. How very, very boring.

  I tried to install the previous version, v.22, from the archives, but it did not work. I would be grateful a way to remove the band to tabs in v.23, or further instructions for down to v.22

  Thank you.

  The following may not be the only or most effective way to get the view you want, but that's what I saw recommended so far.

  You can ban the entire tab bar, or when only several tabs are open, by using a setting in the Tab Mix Plus extension.

  Please see this answer for more information: https://support.mozilla.org/questions/963676#answer-464257

  Tab Mix Plus extension: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

• I tried to import my favorites to internet explorer, but it did not work

  I tried to import my favorites to internet explorer, but it did not work

  You can perform a manual import.

  https://support.Mozilla.com/en-us/KB/importing+Internet+Explorer+Favorites+from+another+computer

  Ignore the phrase "another computer", it works even by doing this on the same PC.

• I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me!)

  I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me: () is lost forever?)

  I can't access my files or the partition from the finder

  My bootcamp partition size is 380 GB.

  This is all the information on the situation:

  sudo TPG - r - vv show disk0

  

  sudo fdisk/dev/disk0

  

  diskutil list

  

  sudo-l/dev/disk0 Gdisk

  

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  

  Sudo gdisk/dev/rdisk0

  

  in IPARTITION

  

  My bootcamp partition is referred to as a free space

  in the finder

  

  Thanks a lot for your help!

  How do you have a 100 MB NTFS file system and free space after the partition of 100 MB. You have a MSR (100 MB), but your windows are the current MSD.

  SIP is activated. Your MBR has no bootable entry, because it is not marked. Please describe in detail what steps were tried.

  What is the year/model of your Mac?

• Unfortunately I can't move my watch to watch OS 2.2! Why! Is there a problem with IOS 9.3.1 really no advice did not work

  Unfortunately I can't move my watch to watch OS 2.2! Why! Is there a problem with IOS 9.3.1 really no advice did not work

  Hello

  If you have already installed a beta seed or a developer, first remove all beta profiles.

  Instructions are available here:

  Update the software on your Apple Watch - Apple Support

• My music is gone and the library.itl method did not work. Help, please!

  I realized that all the songs in my library disappeared, with the exception of those that I bought. I have read a few older threads on people who have this same problem after an update and tried the steps (detected the itunes library.itl file, renaming etc.), but it did not work.

  My music is all saved on my computer and an extra hard drive, but I have more than 20,000 songs and I need my playlists to my business events and the demo of sampling and that makes me desperate. Is there anyway that I can restore my itunes when everything was perfect without slipping literally 20,000 songs in itunes? not to mention those of CDs. thank you if it is not resolved I can cry really.

  You say that you have a backup of your music, but you also have a backup of your library files?  Your playlists are only in your file "itunes library".

  I kind of suspect that you may have not followed exactly the instructions. When you install an update the iTunes application puts a copy of your old library file in the previous record of libraries with a date added at the end.  It is essentially the only thing that has your playlists and a list of media in your media folder.  iTunes creates a library update, then he calls "iTunes Library.itl" If this update procedure is not successful (and in most cases, it is) you can restore it by going to the previous iTunes libraries folder and make a copy of the latest library here (by date, you can see), rename the file by removing everything except "iTunes Library.itl" and what to put in the main folder of iTunes.  Restart iTunes.  If that really, really does not then your recourse to use the library files backup copies you hopefully takes place before that you did any kind of update software on your computer.  It's triply critical if you use equipment on a professional basis because your business depends on.

  If necessary, you can work your way through the previous libraries although they will not be updated. Me realize also that what you see in iTunes is only a list of what is in the file of the library and if you return to a library very old media are still in the media folder, but are unknown to iTunes because they do not appear in the old file to the library.

• Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect.

  Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect. What should I do? I have new Id and worked, but not with my phone.

  I live in Slovakia and I bought this iphone in Florida USA

  Thank you, Maria Nagy

  Any ideas?