Form diagnosis of prints every time I turn on the printer.

Similar Questions

• What would make my firewall turn off for a few minutes every time I turn on the computer.

  Whenever I turn on my laptop, the red icon shows in the task bar telling me that the windows firewall is disabled. I click on the ball and at the time that Security Center opens the firewall is turned back on. Anyone know why this is happening?

  I appreciate all help. Thank you

  Hi SuePerry,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the fix it from the link below and check if it helps.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us?EntryPoint=lightbox

  Method 2: If the method above does not help, then you can refer to the following Microsoft Knowledge Base article and check.

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

  http://support.Microsoft.com/kb/914230

   

  Note: The firewall is software or hardware that checks information coming from the Internet or a network. Firewall blocks some information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  Let us know if it helps.

• 2013 AVG pc tune up continues to check disk every time I turn on the computer.

  Original title: disable disk check

  I downloaded avg 2013 pc tune up and he recommended I do I drive control since it had never been done, but now it does everytime I turn on my computer... How can I stop it...

  How to temporarily disable AVG components.

  http://forums.Avg.com/ww-en/AVG-forums?sec=thread&Act=show&ID=88501

• resolution problem with my monitor every time I turn on

  I have a monitor to display wide w1907 h p on nvidia gforce7050/nvidia nforce 6101.2 weeks I had restore the desktop pc top of page back to default settings since then every time I turn on the screen starts to the resolution of the game and then after a few seconds, it turns into the resolution.i minimum re on this return to the recommended resolution and it stops on this setting until I have put it off and then when I use the PC again I have to repeat the process thanks t..

  Hi Tony,.

  Have you checked that you have the correct nvidia gforce drivers installed from the manufacturers Web site?
  This problem may appear when you have a general driver for the graphics card.

  You could try reinstalling the drivers for the graphics card because it could have been corrupted somehow when return you to the default settings.

  Kind regards

  Joel

• I have a new Omni. Can I put it, so I did not type my password every time I turn it on?

  I have a new Omni.  Can I put it, so I did not type my password every time I turn it on?

  If there is an option to check that I missed.

  If you go to user accounts, you can change the password. Create no password in the new password just press ENTER to block.

• Every time when you open the document in Adobe reader, it will open 'tools' (export - life - pdf, pdf, pdf - luo - etc.). Every time I have to manually turn this off. How I can inhibit this tool? I don't really want to, and he stole my display space. How

  Every time when you open the document in Adobe reader, it will open 'tools' (export - life - pdf, pdf, pdf - luo - etc.). Every time I have to manually turn this off. How I can inhibit this tool? I don't really want to, and he stole my display space. How to inhibit?

  I have little display and allways this "life pdf", 'luo pdf', 'pdf-tiedostoa muokkaa', 'commentary', etc. appear. How I can inhibit this junktool?

  Go in Edition > Preferences > Documents and uncheck "Open tools for each document pane.

• Need to enter the access code each time I turn on the phone after installing 9.3.2.

  My iPhone 6sPlus was annoys me with incessant reminders to install the 9.3.2 update, so I finally gave and did so, against my better judgment. Now, every time I turn off my phone - even if it's for 5 seconds - she insists on the penetrate me in what is now a 6-digit code. I have self-locking set to 'Never', not that that's really where I want, but just to get a bit of time to use the phone, set it down, then use it, without having to enter new code breath. I deleted my credit card only to pay Apple where he was trying to "protect" me, but that did not help.

  Please, I wouldn't mind enter it once from time to time (once a day would be perfect - he was home with me almost all the time, when it is not in my pocket). Please, I desperately hope that someone can help me.

  You have set up contact IDS? That would make it a lot easier...

• The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  Can someone bring me (Labview is new to me) in the right direction?

  John

  See attached the amendment. I made a change to my suggestions and possess the top-level VI for the null refnum. See if it makes sense.

• How do another firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  Hello

  • What version of Windows are you using?

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/Firewall-frequently-asked-questions

• every time when I play the sims3 is QtCore4.dll

  every time when I play the sims3 is QtCore4.dll

  http://thesims.EA.com/us/support/index.html MS - MVP - Elephant Boy computers - don't panic!

• I'm unable to access my account despite the change in my password, windows live every time proposes to change the password

  I'm unable to access my account despite the change in my password, windows live every time proposes to change the password

  Hello

  The question you have posted is related to Windows Live and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I do to make the taskbar allows you to hide every time I have remove the slider from?

  2 questions: How can I do to make the taskbar allows you to hide every time I have remove the slider from?  This rarely works.  Question 2: name of the task SystemSoundsService is called by the Microsoft PlaySoundService class action.  What is his function, and above all, what is the best place for these tasks apparently running in the background all the time?  Is it good to put an end to this task?

  Hello

  Check the scheduled task SystemSoundsService here.

  Description of the scheduled tasks in Windows Vista
  http://support.Microsoft.com/kb/939039/en-us

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Every time I start up the Visual display will not.

  Original title: Aero

  every time I start up the Visual display will not.  I have to adjust from the start menu.

  I use a portable G6 pavilion. The screen is set at 1360 x 768 256 colors 60 hertz.
  He only did this recently.
  Any answers please.

  every time I start up the Visual display will not.

  Hello

  What exactly on your screen going bad?

  In the meantime try reinstalling the latest graphics drivers for the computer. Find them in the HP website.

• Every time when I delete the folder named FavoriteVideo, one goes to the Recycle Bin and still another appears.

  Every time when I delete the folder named FavoriteVideo one goes for trash and another appears again, full scanned too but no threat why cannot be deleted?

  Original title: need help

  Every time when I delete the folder named FavoriteVideo one goes for trash and another appears again, full scanned too but no threat why cannot be deleted?

  It probably belongs to a software, so that when you open the software it creates this folder if it is not there. It's just a guess from what you described above.