It is in the next posts average server pop3
I'm trying to set up an e-mail account and I can't send or receive e-mail because I do not know how to identify servers.
Setting up email in Outlook Express servers:
http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx
Tags: Windows
Similar Questions
-
I posted the picture with the message. The next time I checked, that he was not there but the message was still there! I checked with the same site on Internet Explorer and it's here!
You can try to reset Firefox. Refresh Firefox – reset the parameters and modules
-
The value Post step Expression (no next or previous step)
Is it possible to define the term post to a step, which is not the next or previous step?
I know that it is possible
RunState.NextStep.PostExpression = "Enter Post here"
I'm looking for something like
RunState.Step ("StepID"). PostExpression = "Enter Post here"
Does anyone know if there is a way to accomplish something in this direction?
Thank you!
RunState.Sequence.GetStepByUniqueId ("ID"). PostExpression = 'Blah '.
Hope this helps,
-
I use Windows Server 2003 R2 SP2 as a file server. I create new user 'A' in Windows Server 2003 as well with the option "user must change password at the next logon" selected and give way under the group users and users in the domain for this user. I then share an output folder. User 'A' is using Windows XP SP3 to connect to this shared folder. However, when I try to connect, Windows reappear to enter user name and password. I think it is the limitation in Windows that the user 'A' will be unable to change the password at the next logon or change password at any point in time at all. Correct me if I heard wrong.
If possible, can someone enlighten me what is wrong or what I need to do for user to access folder and change the password on the first logon.
If what I described is not possible, is there another way for me to configure for the user to access share folder so that the user doesn't have to join domain or user of the AD?
http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx
You will need to repost the above Server forums.
Here is the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
The next problem is generated when you try to download a book from the public library. Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.
The work around works of Jean. It would be nice if Adobe provided a real difficulty however.
I have ADE installed 4.03. The problem will occur as soon as that ADE is closed and reopened. It takes so the patch every time allows you to download a book ADE.
1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.
2. expand the Explorer open the file - go up to the OS (c)-
-go to Program files (x 86) - enlarge
-to enlarge Adobe
-go to Adobe Digital Editions and the left click.
-On the right part of the screen right click on Digitaleditions.exe.
-Pop - up menu - on the left, click PROPERTIES
-Pop up to select COMPATIBILITY
-at the top of the menu compatibility, choose the resolution of compatibility issues run
-Pop up to select the troubleshooting program
-Pop up choose the program worked in earlier versions of windows, etc.
-on the left, click NEXT
-POP up - which version etc? Choose that I don't KNOW
-on the left, click NEXT
-POP - up - left click Test Program-
-AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.
3. ADE open - make sure ADE is in library view.
-Left click on FILE and then select Add to LIBRARY from the menu drop down.
-POP UP - down to the right to choose the type of file of social mobilization
-left side of the pop up to choose the directory where you downloaded the file of the CMHA.
-Select the file of the CMHA in the right side of the window and on the left, click OPEN
-It should work, but you have to go through the whole routine if you close ADE.
I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.
-
When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
will have no sound. (but in the contact box everything its fine) Why is this?Why is this?
Because you forgot to patch source audio track.
-
After changing the password in windows server 2003, when the new password take effect?
Hello
In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
Hope the information is useful.
-
Similar to this thread -
- where unfortunately no resolution has been published.I use 6 Captivate and I have a problem with pieces of the next slide after the current one, display/bleeding on the current slide.
This is visible when published.
There is no transition on the slides.
It is published in SCORM format, but the error also exists on the pdf file when it is published as.
Any advice on how to fix this please?
Please see screenshot below. Thank you.
Disable the compression options in the preferences one by one and publish again until you see the results. It is usually the advanced project Compression option that is responsible.
See this page on the project preferences:
http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/how-to-set-up-preferences
-
ASA 5505 Split tunneling stopped working when upgraded to 8.3 (1) 8.4 (3).
A user has to connect to the old device of 8.3 (1) that they could access all of our subnets: 10.1.0.0/16, 10.33.0.0/16, 10.89.0.0/16, 10.60.0.0/16
but now, they can't and in the newspapers, I see just
6 October 31, 2012 08:17:59 110003 10.60.30.111 1 10.89.30.41 0 routing cannot locate the next hop for ICMP to outside:10.60.30.111/1 to inside:10.89.30.41/0
any tips? I almost tried everything. the running configuration is:
: Saved
:
ASA Version 8.4 (3)
!
host name asa
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.60.70.1 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP 80.90.98.217 255.255.255.248
!
passive FTP mode
clock timezone GMT 0
DNS lookup field inside
DNS domain-lookup outside
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the NETWORK_OBJ_10.33.0.0_16 object
10.33.0.0 subnet 255.255.0.0
network of the NETWORK_OBJ_10.60.0.0_16 object
10.60.0.0 subnet 255.255.0.0
network of the NETWORK_OBJ_10.89.0.0_16 object
10.89.0.0 subnet 255.255.0.0
network of the NETWORK_OBJ_10.1.0.0_16 object
10.1.0.0 subnet 255.255.0.0
network tetPC object
Home 10.60.10.1
test description
network of the NETWORK_OBJ_10.60.30.0_24 object
10.60.30.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.60.30.64_26 object
255.255.255.192 subnet 10.60.30.64
the SSH server object network
Home 10.60.20.6
network of the SSH_public object
network ftp_public object
Home 80.90.98.218
rdp network object
Home 10.60.10.4
ftp_server network object
Home 10.60.20.2
network ssh_public object
Home 80.90.98.218
Service FTP object
tcp destination eq 12 service
network of the NETWORK_OBJ_10.60.20.3 object
Home 10.60.20.3
network of the NETWORK_OBJ_10.60.40.192_26 object
255.255.255.192 subnet 10.60.40.192
network of the NETWORK_OBJ_10.60.10.10 object
Home 10.60.10.10
network of the NETWORK_OBJ_10.60.20.2 object
Home 10.60.20.2
network of the NETWORK_OBJ_10.60.20.21 object
Home 10.60.20.21
network of the NETWORK_OBJ_10.60.20.4 object
Home 10.60.20.4
network of the NETWORK_OBJ_10.60.20.5 object
Home 10.60.20.5
network of the NETWORK_OBJ_10.60.20.6 object
Home 10.60.20.6
network of the NETWORK_OBJ_10.60.20.7 object
Home 10.60.20.7
network of the NETWORK_OBJ_10.60.20.29 object
Home 10.60.20.29
service port_tomcat object
Beach service tcp 8080 8082 source
network of the TBSF object
172.16.252.0 subnet 255.255.255.0
the e-mail server object network
Home 10.33.10.2
Mail server description
service object HTTPS
tcp source eq https service
test network object
network access_web_mail object
Home 10.60.50.251
network downtown_Interface_host object
Home 10.60.50.1
Downtown host Interface description
service of the Oracle_port object
tcp source eq sqlnet service
network of the NETWORK_OBJ_10.60.50.248_29 object
subnet 10.60.50.248 255.255.255.248
network of the NETWORK_OBJ_10.60.50.1 object
Home 10.60.50.1
network of the NETWORK_OBJ_10.60.50.0_28 object
subnet 10.60.50.0 255.255.255.240
brisel network object
10.191.191.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.191.191.0_24 object
10.191.191.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.60.60.0_24 object
10.60.60.0 subnet 255.255.255.0
object-group service TCS_Service_Group
Description this group of Services offered is for the CLD's Clients
port_tomcat service-object
HTTPS_ACCESS tcp service object-group
EQ object of the https port
the DM_INLINE_NETWORK_1 object-group network
object-network 10.1.0.0 255.255.0.0
network-object 10.33.0.0 255.255.0.0
network-object 10.60.0.0 255.255.0.0
network-object 10.89.0.0 255.255.0.0
allow outside_1_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.33.0.0 255.255.0.0
allow outside_2_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.89.0.0 255.255.0.0
outside_3_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 allow 10.1.0.0 255.255.0.0
OUTSIDE_IN list extended access permit icmp any one time exceed
OUTSIDE_IN list extended access allow all unreachable icmp
OUTSIDE_IN list extended access permit icmp any any echo response
OUTSIDE_IN list extended access permit icmp any any source-quench
OUTSIDE_IN list extended access permitted tcp 194.2.20.0 255.255.255.0 host 80.90.98.220 eq smtp
OUTSIDE_IN list extended access permit tcp host 194.25.12.0 host 80.90.98.220 eq smtp
OUTSIDE_IN list extended access allow icmp 80.90.98.222 host 80.90.98.217
OUTSIDE_IN list extended access permit tcp host 162.162.4.1 host 80.90.98.220 eq smtp
OUTSIDE_IN list extended access permit tcp host 98.85.125.2 host 80.90.98.221 eq ssh
Standard access list OAKDCAcl allow 10.60.0.0 255.255.0.0
Standard access list OAKDCAcl allow 10.33.0.0 255.255.0.0
access-list OAKDCAcl note backoffice
Standard access list OAKDCAcl allow 10.89.0.0 255.255.0.0
access-list OAKDCAcl note maint
OAKDCAcl list standard access allowed 10.1.0.0 255.255.0.0
access-list allowed standard osgd host 10.60.20.4
access-list allowed standard osgd host 10.60.20.5
access-list allowed standard osgd host 10.60.20.7
standard access list testOAK_splitTunnelAcl allow 10.60.0.0 255.255.0.0
list access allowed extended snmp udp any eq snmptrap everything
list of access allowed extended snmp udp any any eq snmp
downtown_splitTunnelAcl list standard access allowed host 10.60.20.29
webMailACL list standard access allowed host 10.33.10.2
access-list standard HBSC allowed host 10.60.30.107
access-list standard HBSC deny 10.33.0.0 255.255.0.0
access-list standard HBSC deny 10.89.0.0 255.255.0.0
allow outside_4_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.191.191.0 255.255.255.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.1.0.0 255.255.0.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.33.0.0 255.255.0.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.60.0.0 255.255.0.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.89.0.0 255.255.0.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask 10.60.30.110 - 10.60.30.150 255.255.0.0 IP local pool OAKPRD_pool
IP local pool mail_sddress_pool 10.60.50.251 - 10.60.50.255 mask 255.255.0.0
test 10.60.50.1 mask 255.255.255.255 IP local pool
IP local pool ipad 10.60.30.90 - 10.60.30.99 mask 255.255.0.0
mask 10.60.40.200 - 10.60.40.250 255.255.255.0 IP local pool TCS_pool
local pool OSGD_POOL 10.60.50.2 - 10.60.50.10 255.255.0.0 IP mask
mask 10.60.60.0 - 10.60.60.255 255.255.0.0 IP local pool OAK_pool
IP verify reverse path inside interface
IP verify reverse path to the outside interface
IP audit alarm action name ThreatDetection attack
verification of IP within the ThreatDetection interface
interface IP outside the ThreatDetection check
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow any echo inside
ICMP allow any echo outdoors
enable ASDM history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_10.33.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.33.0.0_16
NAT (inside, outside) static static source NETWORK_OBJ_10.89.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.89.0.0_16
NAT (inside, outside) static static source NETWORK_OBJ_10.1.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.1.0.0_16
NAT (inside, outside) static source all all NETWORK_OBJ_10.60.30.0_24 of NETWORK_OBJ_10.60.30.0_24 static destination
NAT (inside, outside) static source all all NETWORK_OBJ_10.60.30.64_26 of NETWORK_OBJ_10.60.30.64_26 static destination
NAT (inside, outside) static static source NETWORK_OBJ_10.60.40.192_26 destination NETWORK_OBJ_10.60.20.29 NETWORK_OBJ_10.60.20.29 NETWORK_OBJ_10.60.40.192_26 any port_tomcat service
NAT (inside, outside) static source any destination of all public static NETWORK_OBJ_10.60.50.1 NETWORK_OBJ_10.60.50.1
NAT (inside, outside) static static source NETWORK_OBJ_10.60.50.248_29 destination MailServer MailServer NETWORK_OBJ_10.60.50.248_29
NAT (inside, outside) static source all all NETWORK_OBJ_10.60.50.0_28 of NETWORK_OBJ_10.60.50.0_28 static destination
NAT (inside, outside) static static source NETWORK_OBJ_10.191.191.0_24 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.191.191.0_24
NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.60.60.0_24 NETWORK_OBJ_10.60.60.0_24 non-proxy-arp-search of route static destination
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
Route outside 0.0.0.0 0.0.0.0 80.90.98.222 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 10.60.10.10 255.255.255.255 inside
http 10.33.30.33 255.255.255.255 inside
http 10.60.30.33 255.255.255.255 inside
SNMP-server host within the 10.33.30.108 community * version 2 c
SNMP-server host within the 10.89.70.30 community *.
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA ikev1
transport mode encryption ipsec transform-set TRANS_ESP_3DES_SHA ikev1
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set lux_trans_set ikev1 aes - esp esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 84.51.31.173
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 2 match address outside_2_cryptomap
peer set card crypto outside_map 2 98.85.125.2
card crypto outside_map 2 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 3 match address outside_3_cryptomap
peer set card crypto outside_map 3 220.79.236.146
card crypto outside_map 3 set transform-set ESP-3DES-SHA ikev1
card crypto 4 correspondence address outside_4_cryptomap outside_map
card crypto outside_map 4 set pfs
peer set card crypto outside_map 4 159.146.232.122
card crypto 4 ikev1 transform-set lux_trans_set set outside_map
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 30
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800
IKEv1 crypto policy 50
preshared authentication
aes encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 70
preshared authentication
aes encryption
sha hash
Group 5
life 86400
Telnet 10.60.10.10 255.255.255.255 inside
Telnet 10.60.10.1 255.255.255.255 inside
Telnet 10.60.10.5 255.255.255.255 inside
Telnet 10.60.30.33 255.255.255.255 inside
Telnet 10.33.30.33 255.255.255.255 inside
Telnet timeout 30
SSH 10.60.10.5 255.255.255.255 inside
SSH 10.60.10.10 255.255.255.255 inside
SSH 10.60.10.3 255.255.255.255 inside
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd dns 155.2.10.20 155.2.10.50 interface inside
dhcpd auto_config outside interface inside
!
a basic threat threat detection
length 3600 scanning-threat shun threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
TFTP server inside 10.60.10.10 configs/config1
WebVPN
internal testTG group policy
attributes of the strategy of group testTG
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
internal DefaultRAGroup_1 group strategy
attributes of Group Policy DefaultRAGroup_1
value of 155.2.10.20 DNS server 155.2.10.50
Protocol-tunnel-VPN l2tp ipsec
internal TcsTG group strategy
attributes of Group Policy TcsTG
VPN-idle-timeout 20
VPN-session-timeout 120
Ikev1 VPN-tunnel-Protocol
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list testOAK_splitTunnelAcl
the address value TCS_pool pools
internal downtown_interfaceTG group policy
attributes of the strategy of group downtown_interfaceTG
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list downtown_splitTunnelAcl
internal HBSCTG group policy
HBSCTG group policy attributes
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value HBSC
internal OSGD group policy
OSGD group policy attributes
value of 155.2.10.20 DNS server 155.2.10.50
VPN-session-timeout no
Ikev1 VPN-tunnel-Protocol
group-lock value OSGD
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list testOAK_splitTunnelAcl
internal OAKDC group policy
OAKDC group policy attributes
Ikev1 VPN-tunnel-Protocol
value of group-lock OAKDC
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list OAKDCAcl
Disable dhcp Intercept 255.255.0.0
the address value OAKPRD_pool pools
internal mailTG group policy
attributes of the strategy of group mailTG
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list webMailACL
internal OAK-distance group strategy
attributes of OAK Group Policy / remote
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value OAK-remote_splitTunnelAcl
VPN-group-policy OAKDC
type of nas-prompt service
attributes global-tunnel-group DefaultRAGroup
address pool OAKPRD_pool
ipad address pool
Group Policy - by default-DefaultRAGroup_1
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group 84.51.31.173 type ipsec-l2l
IPSec-attributes tunnel-group 84.51.31.173
IKEv1 pre-shared-key *.
tunnel-group 98.85.125.2 type ipsec-l2l
IPSec-attributes tunnel-group 98.85.125.2
IKEv1 pre-shared-key *.
tunnel-group 220.79.236.146 type ipsec-l2l
IPSec-attributes tunnel-group 220.79.236.146
IKEv1 pre-shared-key *.
type tunnel-group OAKDC remote access
attributes global-tunnel-group OAKDC
address pool OAKPRD_pool
Group Policy - by default-OAKDC
IPSec-attributes tunnel-group OAKDC
IKEv1 pre-shared-key *.
type tunnel-group TcsTG remote access
attributes global-tunnel-group TcsTG
address pool TCS_pool
Group Policy - by default-TcsTG
IPSec-attributes tunnel-group TcsTG
IKEv1 pre-shared-key *.
type tunnel-group downtown_interfaceTG remote access
tunnel-group downtown_interfaceTG General-attributes
test of the address pool
Group Policy - by default-downtown_interfaceTG
downtown_interfaceTG group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group TunnelGroup1 remote access
type tunnel-group mailTG remote access
tunnel-group mailTG General-attributes
address mail_sddress_pool pool
Group Policy - by default-mailTG
mailTG group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group testTG remote access
tunnel-group testTG General-attributes
address mail_sddress_pool pool
Group Policy - by default-testTG
testTG group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group OSGD remote access
tunnel-group OSGD General-attributes
address OSGD_POOL pool
strategy-group-by default OSGD
tunnel-group OSGD ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group HBSCTG remote access
attributes global-tunnel-group HBSCTG
address OSGD_POOL pool
Group Policy - by default-HBSCTG
IPSec-attributes tunnel-group HBSCTG
IKEv1 pre-shared-key *.
tunnel-group 159.146.232.122 type ipsec-l2l
IPSec-attributes tunnel-group 159.146.232.122
IKEv1 pre-shared-key *.
tunnel-group OAK type remote access / remote
attributes global-tunnel-group OAK / remote
address pool OAK_pool
Group Policy - by default-OAK-remote control
IPSec-attributes tunnel-group OAK / remote
IKEv1 pre-shared-key *.
!
!
!
Policy-map global_policy
!
context of prompt hostname
no remote anonymous reporting call
HPM topN enable
: end
enable ASDM history
Hi David,
I see that you have:
allow outside_2_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.89.0.0 255.255.0.0
So, please make the following changes:
network object obj - 10.60.30.0
10.60.30.0 subnet 255.255.255.0
!
Route outside 10.60.30.0 255.255.255.0 80.90.98.222
Route outside 10.89.0.0 255.255.0.0 80.90.98.222
NAT (outside, outside) 1 source static obj - 10.60.30.0 obj - 10.60.30.0 static destination NETWORK_OBJ_10.89.0.0_16 NETWORK_OBJ_10.89.0.0_16 non-proxy-arp-search to itinerary
HTH
Portu.
Please note all useful posts
Post edited by: Javier Portuguez
-
What's next?; Considerations to decide on the next steps in career path
"So, what's next?
That is the question that I fear, simply because I have no answer. I remember when it was an easy question because I didn't have the choice. At school, your path is clear. Your program of study is determined for you, and you travel from one row to another year. Overtime, you are allowed a few privileges. You can start to select some courses and teachers and choose what semester to take different classes. Every now and then you may regret this category art that you registered, but the consequences for a poor class selection are simply boredom or a below average grade.
Increase of consequences of decision making
As you get older, increasing choices, increases in doubt, and the stakes for bad choices are triggered. The decision to go to College, pursue a vocation or joining the armed forces is difficult for many high school graduates. Even after that decision is made it must be lingering doubt. College majors are a roll of the dice. Most of the people don't stop in the career field they studied. Not that my science policy major only has not served me well... But this major college still offers a guide of course study and provides options for "what's next."Increase in freedom and doubt sets in
You finally enter the labour market, and it's often where you see the ends of the predefined path. He has a great sense of liberation that comes with this new adventure. The world is yours for the taking. Everything is possible. And this freedom of choice has expanded in recent years. When I look at Baby Boomers, many of them had some kind of career path set before them. There was a focus on the scale of the company of mountaineering. This has changed. Generation y and the Gen Y discover their career as a gym jungle of sorts, swinging a new project and opportunity to another.But does respond to old age "where you see yourself in five years?" question much more difficult. For many of us, the jobs we have 5 years do not currently exist. Personally, career opportunities, I've had over the past ten years have been made by oneself. I loved.
Course-correct what's next
So, how do you answer what's next?
This is a great post. I have struggled with the question of whether I should return to school and get my MBA. I don't know the end of the day if he will really get me where I am trying to go - honestly, I'm not really sure what it is! I think it's a good idea to take a little at a time and take a course or do some self-training on an area that you are interested in. I think that it will lead you to your next step or confirm that you are not on the right track to allow you to take a step back and re-evaluate. I think it is really always the key. Take the time to really think about what aspects of your work that you enjoy and the tasks that you would be fine with leaving behind forever. And of course, above all, stop talking about what you want to do or learn and just go out and do it!
-
After the installation of KB2582282, all timed SSRS 2008 subscription get the next bad performance calculated by the Scheduler SQL 2008. Is there any solution for this? I am running SSRS 2008 x 64 and SQL 2008 x 64 sp1. NO R2. After uninstalling the hotfix rollup16 for SQL, Scheduler calculates the next run correctly times again.
Hello
As the question you posted is related to Microsoft servers, I suggest you to ask your question to
Microsoft MSDN
SQL Server Reporting Services
http://social.msdn.Microsoft.com/forums/en-AU/sqlreportingservices/threads
-
The next fatal alert: 40. The internal error state is 1207.
When I try to connect to IIS, I get the message on the browser, this page cannot be displayed.
I see the following messages on the server instance, and can't see why it's a failure.
The next fatal alert: 40. The internal error state is 1207.
Before this message
A transfer of server SSL completed successfully. The negotiated encryption settings are as follows.
Protocol: TLS 1.0
CipherSuite: 0 x 35
Exchange force: 2048Hello
Thanks for posting your query in Microsoft Community.
According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.
Hope this information is useful.
-
Windows Server 2003 R2 Standard Server
Client-side: Windows 8The problem:
I create a new user and let the "user must change password at the next logon' checked. When I try to log in with the newly created user I get an error saying "User must change password at the next logon" after ptoviding the new password.
At this point if I uncheck the "user must change password at the next logon', then the user can connect properly.
Can someone help me. Please let me know any problem OS compatibility between the server and the OS cleint.
Jaril
Hi Jaril,
Thanks for posting your query in Microsoft Community.
According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.
Hope this information is useful.
-
Ethernet link to the bridge network and server
I'm not an expert and hope that I do not use the wrong terminology, but I have an intermittent fault which has become more or less permanent. My major son put up for me a computer with Windows 8 as its operating system and a server for storage, connected by a cable to transfer files. The computer has its own router, with which it communicates with the local network based on a router and modem in the next room. There is a network bridge to access the internet. Initially (January 2013) it worked well. Sometimes, I couldn't connect to the server immediately, but simply another attempt was enough to access it, and he had no problem with the internet connection.
More recently (late July and August 2013), it became more difficult to access the server and now seems permanently impossible, the server simply showing with a red X across as one of the devices on the computer page. The Internet becomes also more difficult, although there is no need for the server or available to arrive and still connects for a short while before disconnect. In July, the internet can usually be restored by turning off the modem and the router, and when they were on again to restart Windows 8, but that no longer works. I tried to reset the computer to the previous settings, but without success. I also tried the diagnostics tools, but generally, they fail to address the issues identified, except for an occasional brief of the internet. Until today, it has always been possible to show the LAN on the network page, including the iMac computer and printer next to the router and the modem, but today the network folder showed most of the time as empty, any diagnosis I ran in the attempt to identify and connect to the local network, which today needs to manually connect even if automatic connection is checked. Conversely the iMac can still see the computer Windows 8 when he is awake through the LAN, but only in January, he sees the server.
The error or the troubleshooting messages that have been published are (1) to the server: the (network) path could not be found, or the name is already used. The IP given my son is 192.168.0.101, I tried and failed to find in the browser of my iMac, which does not suggest that it is already in use. Even if it wasn't a valid IP address, it would not have worked between January and July.
(2) for internet access: reset of the card of network bridge that can force a reboot with a reference to the AREA of PAGE_FAULT_IN_NONPAGED_ that I can't continue without an internet connection. unresolved issues can include one or all of the connection between your modem cable, router or point of access and the Internet is broken. "Network bridge" is not a valid IP configuration. the default gateway is not available. The computer in the other room has had uninterrupted access to the internet, so it is unlikely that the router or the modem it are at fault, who leaves the access point or the configuration of the network gateway. I found some of these error messages in the discussions on Windows 7, but not for Windows 8.Finally, the watch status bar above all a network with limited access and a connected LAN ethernet bridge, which is not enough to bring me to the server or the internet; However, today the necessary local network setting procedure of discovery of devices running and by ticking the automatic connection to the LAN router in the next room, although both had previously been functioning. Is this the consequence of Windows updates downloaded and installed since January? Very briefly this afternoon after having restorng the settings they had on August 5, the convenience store was able to solve the problem of the bridge network, only for access to the internet to be cut shortly afterwards for lack of a valid IP, a problem solved configuration a few minutes before. Would it be possible to obtain internet access directly via the LAN network without the need for a network bridge, or is it a mistaken assumption on my part? Even if this is right, remains the problem of access to the server. Any thoughts anyone?
Hi Clive,.
If you have included a lot of details about this question in the thread, I was unable to get a clear picture of the network configuration you have. What is the topology of the network that you set up? How the server is connected to the network? What is a Client-Server network model you have?
If Yes, then this problem is better suited for it professionals about TechNet Forums that are well equipped with the knowledge of Client-Server network issue. Please post your question in the TechNet Windows 8 IT Pro Networking Forums from this link:
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking
Hope this information is useful.
-
Sending an id to the next page
Hello
Need more help please. OK, so I've created this site to database. Everything works perfectly, but when my pages redirect it does not send the value of the id to the next page if I add '? ID = 5"manually in the browser address bar, and then it displays the correct details for this particular id. How to use dreamweaver for the generated send me to keep the site working properly? What I have to physically php code or is there a Dreamweaver feature that can do this for me?
Please can help you.
Thank you
Owen
Owen,
Provide a recommendation more detailed your query. Shooting in the dark is not desired by volunteer contributors of this forum. Ideally the session for the user id must be created during its connection, defined not based the result of a query later.
You wrote:
What I want to do is once a user registers on the registration page that the page should redirect to a success page and have a message ' thanks user X for recording.
You can also this simply echo the value post on page registration success the user name 'name' which was 'named' regardless of the registration form. If field registration form for the user name is called echo on the success page username by entering this php
Thanks for registration.
The item values survive that the duration of a pageload. After that, they are destroyed. So if you want to keep the data to display then you need to create a session for the post value variable. Google the term How to create the session variable or similar term and you will no doubt find countless resources that explain the process entirely.
Remember that by default Dreamweaver Server behavior connection automagically creates the SESSION ["MM_Username"] for the username of the logged in user. Simply echo the SESSION ["MM_Username'] to display the user name for the user connected.
Look here: http://cookbooks.adobe.com/post_Display_user_s_name_and_other_details_after_login-16672.ht ml
best,
Shocker
Maybe you are looking for
-
Update iTunes 12.1.5 broken ipod touch sync
ITunes does not recognize my ipod touch after that put 12.1.5 update today. Win10 IOS 6.x on iPod Touch
-
In the previous version of FireFox, there is a practice * symbol on the left side of the toolbar area. I used this often to spend part of my viewing to another. I understand that, if I could see the symbol in the menu, I could move it to the toolbar
-
Symbol of the constant 'thought '.
My cursor indicates a "symbol of circular wait" as if the computer is thinking. Everything works fine, but the symbol appears intermittently. How can I get it to go?
-
How to remove thumbdrive driver and prevent them from be installed?
Hi all, currently I put a lab for students. One of the requirements for this configuration gave me is to disable the use of USB key or external hard drive. Whenever a key - USB plug first into the USB, a driver will be install (like USB, Samsung, Tos
-
I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary? original title: bios update