The value Post step Expression (no next or previous step)

Similar Questions

• How to handle errors in my reminder of failure stage post? The reminder post step runtime error will not work with the reminder of failure stage Post

  Hello

  I use post step reminder of failure to manage failures in my sequence. The sequence of reminder post not failure has many steps inside. I realized that other reminders like post step runtime error reminder and Post result list enrty do not work to get the stage Post failure callback procedure. Any suggestions for the error handling in the reminder of failure stage post?

  I also generate a report for the steps in the reminder of failure stage post. How can I do this?

  Thank you

  Yvette

  Thanks for your reply. I use developed approach for reporting. I uses the property Locals.Resultlist of the recall of step seq file post failed to accumulate the results and have a LabVIEW VI in the Group of the cleanup step to remove the results of the local population. List results and writing in an excel file.

  Thank you

  Yvette

• The value of this expression

  I was looking through some old projects tutorial and came across this expression

  [thisLayer.width/2, thisLayer.height/2]

  which has been applied to the Center property to wipe the Radial effect wipe.

  Basically, it places the center of the tissue at the point exactly at the center of a layer.   I thought he had a special power as if the layer were not equal scale, it would prevent something funny to happen, but it works as if the Center wipe was place the needle in the center of the layer.

  Then I changed it to

  [thisComp.layer("flower").width / 2, thisComp.layer("flower).height / 2]

  thinking that it would result in the implementation of the pole Wipe to jump to another location, the central point of the layer of flowers which was off the coast of the center of the composition.  But he stayed in the Middle "this layer".

  So I was wondering is there something special about this expression other that understand math and maintaining, in this case, the Wipe Center property in the center of the layer.

  I just try to understand better the expressions.

  Thank you

  on a CS 5.5 mac

  I think you need to perform a transformation from layer space to get the center of the other layer in coordinated model and then enter this point in the coridnates of the layer with the expression. Like this:

  L = thisComp.layer("flower");

  fromComp (L.toComp ([L.width/2, L.height/2]))

  Dan

• Set the value of the parameter in the call sequence by programming

  Is there a way to set the value of the parameters of a call sequence with a vi with the context of the sequence in the order which is called? Cases not the same subseqence with a vi in the mainsequence maybe?

  

  In your VI, I think you should be able to set the value of Step.TS.SData.ActualArgs.paranumber.Expr to the value of the setting that you want. (This property is visible in the Variables pane, only if you have configured the Options of Station to display hidden properties). Note that the purpose of the step should refer to the sequence of your call step.  Also, remember that the property represents an expression, so if you want to pass the value 33, you must enclose the value in quotes ("33").

  Jeff

• php redirection based on the value does not?

  Hello, I have a registration page, a login, failed.php and one page landing page once they have signed.

  the user registers (application - formP1.php) then once they did that they would be redirected to the next page (request - formP2.php) they then add other information.

  There is a redirect on request - formP1.php this case, the user has finished with the page (completed) they are directed to the application - formP2.php

  If ($status is "P1complete")

  {

  Header ("location: application - formP2.php");

  }

  the trouble I have is that if I just tried to access applications - formP1.php (which is the registration page) it is automatically sending the user to demand - formP2.php even if they are not signed, then because they are not signed it sends the user to the page failed (obiously because the user of retstrict does not work)

  I have included the code below for application - formP1.php

  If ((isset($_POST["MM_insert"])) & & ($_POST ["MM_insert"] == "form1")) {}

  $insertSQL = sprintf ("VALUES INSERT INTO LettingsTenApp (tenID, progress, tenTitle, tenUsername, tenPassword, tenSex, tenEmail, tenDobDD, tenDobMM, tenDobYY, tenDepend, tenMarital, tenPrevSurn, tenEmployTyp, tenNINumber) (%s %s %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s)',

  GetSQLValueString ($_POST ['tenID'], "int").

  GetSQLValueString ($_POST ['progress'], "text").

  GetSQLValueString ($_POST ['tenTitle'], "text").

  GetSQLValueString ($_POST ['tenUsername'], "text").

  GetSQLValueString ($_POST ['tenPassword'], "text").

  GetSQLValueString ($_POST ['tenSex'], "text").

  GetSQLValueString ($_POST ['tenEmail'], "text").

  GetSQLValueString ($_POST ['tenDobDD'], "text").

  GetSQLValueString ($_POST ['tenDobMM'], "text").

  GetSQLValueString ($_POST ['tenDobYY'], "text").

  GetSQLValueString ($_POST ['tenDepend'], "text").

  GetSQLValueString ($_POST ['tenMarital'], "text").

  GetSQLValueString ($_POST ['tenPrevSurn'], "text").

  GetSQLValueString ($_POST ['tenEmployTyp'], "text").

  GetSQLValueString ($_POST ['tenNINumber'], "text"));

  @mysql_select_db ($database_Letting, $Letting);

  $Result1 = mysql_query ($insertSQL, $Letting) or die (mysql_error ());

  $insertGoTo = "app - formP2.php";

  If (isset {}

  $insertGoTo. = (strpos ($insertGoTo, '?'))? « & » : « ? » ;

  $insertGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $insertGoTo));

  }

  @mysql_select_db ($database_Letting, $Letting);

  $query_rsTenant = "SELECT * FROM LettingsTenApp";

  $rsTenant = mysql_query ($query_rsTenant, $Letting) or die (mysql_error ());

  $row_rsTenant = mysql_fetch_assoc ($rsTenant);

  $totalRows_rsTenant = mysql_num_rows ($rsTenant);

  $status = $row_rsTenant ['progress'];

  Redirect the user if their application is completed

  If ($status is "P1complete")

  {

  Header ("location: application - formP2.php");

  }

  and shape

  < do action = "<?" PHP echo $editFormAction;? ">" method = "post" name = "form1" >

  < input type = "submit" value = "Save & amp; Continue"/ >

  < input type = "hidden" name = "progress" value = "P1complete" / >

  < input type = "hidden" name = "MM_insert" value = "form1" / >

  < / make >

  Thank you

  > or is it not the workflow. ?

  This is useful, but it is not yet clear what makes a large part of your code.  So when the user logs in, they were redirected to the script that you have placed in us? Do you have an online version, where you can see the workflow?

  Your script must then use the user connection in the select SQL.  This may be the variable session or the posted username form field.

  If it still does not work, then you should test the value of the session variable or the values posted

  echo $_SESSION ['MM_Username"]

  or

  echo $_POST ['tenID']

  But your code is a mess. Your form fields do not match your PHP. For example, you show us:

  but test it to the ground to help

  If (isset($_POST['tenID'])) {}

• The values in pixels instead of %

  Most of the books and threads talk to set the values are normally expressed in pixel values - but this option is not in Lightroom - only percentages. How about that - and in addition, the possibility of obtaining a value average over a large area - so it's easier to define levels of exposure of McBeth, graphics etc.

  David clark

  www.samsphotolab.com

  Hi David,

  There are probably thousands of messages on this already. Pixel 8-bit values are the things to say when you have and in a defined color space. A pixel in Adobe RGB value will be a different color in sRGB (I know that you are aware of what is a laboratory). When you look at Lightroom you are looking at a record of ProPhotolike with a depth of 16 bits. The pixel values will not match with what you see on the screen vs. sRGB output.

  Now a practical suggestion IMHO would be to ask a filtered histogram view menu that can emulate made spaces with the corresponding pixel values. Request the current display to turn into something else will not happen (again MHO).

  As concerns re mechiers, have you looked at the DNG Profile Editor that can create a profile of camera on this basis?

• Next view; previous view

  Hi all

  InDesign doesn't seem to have everything changes between two pages. For example, if I want to change it back between the two pages I visit, say, page 3 and page 12, is there a way to generate scripts it?

  Acrobat offers a view next/previous page as the first page / last page and next page / previous page. Can only be followed by scripts for InDesign?

  Best,

  Mike Witherell in Maryland

  Hi Mike,.

  There is no rocking, I know, but there is a 'Go Back' and 'Go '.

  Forward"in keyboard shortcuts.

  So, say you were in page 145, and makes you p. 10, back to 145

  It's Ctrl-Page up on a PC (in text mode).

  Discover the menu of keyboard shortcuts: area of product: Menu layout > go

  Back and forward.

  -What are you looking for?

  Ariel

• Next and Previous menu slide Flash

  We are currently responsible for SAP training that has been created with OnDemand software update. Current simulations have a Javascript menu on each screen, which provides various features including rising from the current slide to next or previous slides.
  
  When the existing sequence is played, and has captured, we lose the functionality of menu javascript.
  
  I created a Flash Menu and imported to the newly captured Captivate movie. All the links in the menu work except slide slide next and previous.
  
  The script that I use for the button to the next slide is as follows:
  This.next_btn.onRelease = function() {}
  This ._parent ._parent... nextFrame();
  }
  Also, I tried to 'play' nextFrame and target the path "_root" to substitute for the first '_parent '.
  
  'RdcmndNextFrame' and 'rdcmndPrevious' variables do not work unless you use a bar reading, which affect the simulation.
  
  If someone has never created such a feature? It seems that it would be straight forward. It's probably a problem of target path. The captivate movie is the container for the menu flash. To access the chronology of the captivate movie and go to the next or previous slide is what I really need.
  
  Help!

  I solved the problem by choosing to use a PlayBar and then in the file Flash affecting the visibility of the PlayBar on '0 '.

• Outlook Express 6 just ate the value of year of my emails. They seem to have disappeared. This happened after I was asked if I wanted compact (or was it archive?) my emails.

  Outlook Express 6 just ate the value of year of my emails.  They seem to have disappeared.  This happened after I was asked if I wanted compact (or was it archive?) my emails.  All hope of recovery?

  Thank you!

  Please read this in its entirety. It includes the restoration of the trash.
   
   
  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
   
  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  Recovery methods:
   
  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
   
  To restore a folder bak on the message store folder, first find the location of the message store.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
   
  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
   
  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
   
  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
   
  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:
   
  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx
   
  And see:
  
  http://www.oehelp.com/OETips.aspx#4
   
  A general warning to help avoid this in the future:
   
  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  
  http://www.oehelp.com/OEBackup/default.aspx  

• I can reverse the value stored in Step.Result.PassFail (no)?

  I'd like my test of success/failure at the NECK so my VI to false.

  to do this, I need to reverse the value before saving it for Step.Result.PassFail

  I tried the following when you save the output of the VI to Step.Result.PassFail, but it does not work

  ! Step.Result.PassFail

  Not (Step.Result.PassFail)

  Any advice?

  You can reverse not only before you leave the code module or you could reverse in the expression of the position.

• Get the value of the primary key next or previous

  Hi guys,.
  
  I use this interactive report with a Get Next or previous primary key value process.
  This works very well if you do not filter anything, because it will take you to the next ID.
  
  BUT, I can do this job, so I only get the ID of the selected (using filters) lines?
  
  It is obvious that you would like to, in the hollow of the page, the results of the international registration instead of all records.
  
  Kind regards
  
  Bottom

  Hi Philippe,.
  I also went through the trouble of IR + disorders navigation of form and was very disappointed with the standard record Navigation. So, in the hope of finding a solution I trawled by google :) search results Fortunately, I found a blog of Simon Hunt, where he shares his solution with us (Blog of the SHUNT: http://simonhunt.blogspot.com/2009/12/next-and-prev-from-interactive-report-2.html).
  However, it was not enough for me, as I have many IRs with columns that have their display derived from a LOV values. His solution is great, a lot of pure sql to analyze :) Then, I took his code and adapted/customized to my needs. The steps are explained in a blog I did, where the code was included. http://tpetrus.blogspot.com/2012/03/record-navigation-in-Oracle-apex.html
  I've also set up a small example application here: http://apex.oracle.com/pls/apex/f?p=54687:30.

• Why doesent runstate.sequencefile.data.seq.mysequence.mystep.result.numeric contains a measure value when I use it in a reminder of the UUT post?

  Hello

  I want to write that a witch of the csv file contains all the measured values and the limits of my machine. So I try to give the values in post use reminder to a vi. The limits work and the csv file contains all my limits, but the measured values are all 0. I used runstate.sequencefile.data.seq.mysequence.mystep.result.numeric

  I do not want to do with FileGlobals because they are values much.

  Thanks for any advice for this problem.

  There is probably a better way to accomplish what you want.  But to make your life easier, I'll give you the hacky solution:

  Use: Runstate.ProcessModelClient.Data.Seq.MyStep.Result.Numeric

  The funny is that the report must contain all the information you want. Just, I would create an engine to convert your csv look.  If you use 2012 then this seems to be an ideal candidate for a plugin.

  Hope this helps,

• update the value of the column to the next value

  Hi all

  create table xxc_test (date of from_date, to_date date, amount, number incr_amount);

  Select 2014, 2015, 3000, the double null

  If suppose if input data in the incr_amount then let say 1000 I want to update the value with incr_amount column amount

  Select 2014, 2015, 4,000 of the double

  If not even though it is as

  Select 2014, 2015, 3000, the double null

  and must be updated to the year

  Note: I spend the year, amount,incr_amount manually (run-time)

  Post edited by: Rajesh123 Note added in the subect

  Hello

  : new.incr_amount: = 0; also use it in code.

  The condition " If : new.incr_amoun is > 0" then (sure fire or change the value only if the increment is positive. ).

  ,....

  ..
  

  end if;

  
  

  -Thank you

  Pavan Kumar N

• Manual search - when start us research by removing the value manally, same results for future research in the next page.

  Hi guys OAF.

  Created a page of manual search with several buttons below. After entering search criteria and click on the first button, it shows the records in a separate page where I perform trade operations. The second page, I have a "back to the main search" link that takes me to the first page of search.

  Now, if I remove the value of any field of text input by clicking X mark the end of the field, or pressing the button remove the key board and try searching again, same values are to come in the next page as if I did not remove the value.

  Data on the next page is mainly with the help of setWhereClause. And here is the code I wrote.

  public void issueQuery (String OrderNum)

  {

  If ((OrderNum! = null) & & (!("".)) Equals (OrderNum.Trim ()))

  {

  setWhereClause ("ORDER_NUMBER =: 1");

  setWhereClauseParams (null); Always reset

  setWhereClauseParam (0, OrderNum);

  }

  executeQuery();

  }

  Please advice, what has gone wrong or its something Oracle behavior?

  Thank you

  Bideau

  I got the answer, it is resolved after the setwhereclause reset each time.

• How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  I use JDeveloper 12.1.2.0.0

  < af:button id = "tt_b2".

  rendered = "#{attrs.nextRendered} '"

  partialSubmit = 'true '.

  action = "#{attrs.backingBean.nextAction} '"

  Text = "next".

  Disabled = "#{attrs.nextDisabled}" / >

  private static final String NEXT_NAVIGATION_ACTION = "controllerContext.currentViewPort.taskFlowContext.trainModel.getNext";

  public String nextAction() {}

  If (validate()) {}

  updateModel();

  Return NEXT_NAVIGATION_ACTION;

  }

  Returns a null value.

  }

  Use case is made for model train, which is being implemented based on this blog: http://javacollectibles.blogspot.co.UK/2014/10/ADF-train-template.html

  We define a generic action following in the model, but the action must be called under certain conditions, based on the question of whether all validation controls had been passed on no.

  You can do this in two ways:

  1 returnValue = (String) ADFUtils.invokeEL("#{controllerContext.currentViewPort.taskFlowContext.trainModel.getNext}");

  return returnValue;

  2.

  public String getNextTrainStop() {}

  String nextStopAction = null;

  ControllerContext controllerContext = ControllerContext.getInstance ();

  ViewPortContext currentViewPortCtx = controllerContext.getCurrentViewPort ();

  TaskFlowContext taskFlowCtx = currentViewPortCtx.getTaskFlowContext ();

  TaskFlowTrainModel taskFlowTrainModel = taskFlowCtx.getTaskFlowTrainModel ();

  TaskFlowTrainStopModel currentStop = taskFlowTrainModel.getCurrentStop ();

  Terminus of TaskFlowTrainStopModel = taskFlowTrainModel.getNextStop (currentStop);

  nextStopAction = nextStop.getOutcome ();

  _logger.fine ("train, next stop:"+ nextStopAction ");

  Return nextStopAction;

  }