It is possible to install 10g and 11g in server (2003) even?

Similar Questions

• Error code: 0x8007F004 when you try install kb2286198 and kb2229593 on Server 2003 R2

  He suggested another forum MS that I post this here. I am updating a Win2003 R2 Server with kb2286198 and kb2229593. Initially, I found little or no info, but read things on WXP shows that it could block the antivirus software. AV has been disabled, I'm an admin on the server is my colleague who gets the same permissions error when you try to manually install these updates as well.

  If anyone has any help it would be great.

  It has been suggested from another MS forum I post this here... AV has been disabled, I'm an admin on the server is my colleague who gets the same permissions error when you try to manually install these updates as well.

  Posted in your original thread: I have a 2 k 3 R2 server running software to clock and network shared directories for my business. Server is blocked on a KB2229593 update and I can't find a way to allow installation. When I try the normal windows update, it can quite simply, when I try to install it manually it gives me an error, you are not allowed to install in contact with server 2003 from your system administrator.

  8007f004 - STATUS_INSUFFICIENT_PRIVS [PRIVILEGES]

  In fact, the error suggests that the behavior can be due to infection. That being said...

  You have restarted the server since the initial failure to install KB2229593 (which was released July 13) or the inability to install KB2286198 today?

  ~~~~~~~~~~~~~~~~~~~~~~~

  Don't not giving you skin but I think you'd be much better off the coast of post in this forum since we really don't deal with Windows Server in the Windows Update forum:http://social.technet.microsoft.com/Forums/en/winserversecurity/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Is it possible to install 10gXE and 11g on the same server?

  On my PC (WIndows XP), I've got Oracle 10gR2XE. I can also install a free version of Oracle 11 GR 2 defining an Oracle home different order to is not in conflict with my real Oracle 10gR2XE?

  Thanks in advance!

  Hi Mark,

  Yes, you can install several houses Oracle of different version on the same host, but on a separate oracle home directory.

  Thank you

  Chandra

• Issue of upgrade of database (10g and 11g)

  Hello

  I currently have 2 versions of oracle installed on my server 10g and 11g

  (1) oracle Database 10 g Enterprise Edition Release 10.2.0.5.0

  With oracle-/oracle/app/oracle/product/10.2.0/db_1 House

  &

  (2) oracle Database 11 g Enterprise Edition Release 11.2.0.3.0

  With oracle home-/u01/app/oracle/product/11.2.0/dbhome_1

  Is it possible level Oracle database 10g Enterprise Edition Release 10.2.0.5.0 to Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 using the oracle same House for 11 g IE (/ u01/app/oracle/product/11.2.0/dbhome_1) the process of DBUA

  Would appreciate any help on this matter.

  Yes - pl see the Upgrade Guide - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm

  You can skip the part of the doc where it plans to install 11 GR 2, since you already have installed binary files.

• Weblogic server integration is needed in Jdeveloper for BPEL of 10g and 11g upgrade?

  Hello

  Weblogic server integration is needed in Jdeveloper for BPEL of 10g and 11g upgrade?

  We migrated BPEL 10g and 11g. I understand that this integrated weblogic server is part of jdeveloper.

  Integration of weblogic server allows successful simulation of the weblogic Server real 11g which we installed as a separate product?

  or should we connect jdeveloper to weblogic server 11g instead of the integrated weblogic Server?

  Please notify.

  Thank you

  No, built-in weblogic server is not necessary in jdeveloper for bpel upgrade.

  If you are migrating bpel go separate domain and weblogic/managed servers, don't use integrated weblogic.

  Kind regards

  Anshul

• 10g and 11g

  Hello
  
  I read the various messages about Discoverer 10 g and 11 g upgrade.
  
  No matter who would be able to tell me the General problems that exist that we must be aware of if we improve to 11g?
  
  Thank you.
  
  Leah

  Hi LEA
  I see no major problems that would prevent you from upgrading to 10g and 11g.

  The server underlying application changes to OAS for Weblogic, but put except that you won't see any changes. Certainly more and Viewer function similarly as Admin and office. Even the iitself EUL is 100% compatible between the two. You mind I advise to use a 11g database.

  The tricky part is to understand how to install discoverer 11g and then having someone who can learn to manage the discoverer using Weblogic.

  From the point of view of the end-user, everything will be fine. In fact, in my opinion discoverer 11g works faster than 10g, probably because Weblogic manages web stuff better than the old OAS.

  Hope this helps
  Best wishes
  Michael

• loadjava - 10g and 11g

  Hello;
  
  Implementation of this line in 11g:
  loadjava, myUser and password - u - v - r-f./java/MyString/MyStringObject.java
  Everything is OK.
  
  Running the same line in 10g:
  arguments: '-u' ' myUser/Password' '-v' '-r' '-f' '. / java/MyString/MyStringObject.java'
  Error in the determination of the contained classes dans./java/MyString/MyStringObject.java
  Exception oracle.aurora.sqljdecl.ParseException: lexical error on line 75, column 5. Encountered: '@' (64), after:
  
  The error is @Override

      /**
       * @see java.lang.Object#toString()
       */
      @Override
      public String toString() {

  Why does this happen?
  Is it possible to fix by changing the loadjava settings?
  Is there an incompatibility between 10g and 11g?
  
  Thank you.

  >
  Implementation of this line in 11g:
  loadjava, myUser and password - u - v - r-f./java/MyString/MyStringObject.java
  Everything is OK.

  Running the same line in 10g:
  arguments: '-u' ' myUser/Password' '-v' '-r' '-f' '. / java/MyString/MyStringObject.java'
  Error in the determination of the contained classes dans./java/MyString/MyStringObject.java
  Exception oracle.aurora.sqljdecl.ParseException: lexical error on line 75, column 5. Encountered: '@' (64), after:

  The error is @Override

  Why does this happen?
  >
  Why is it? Because the JVM in Oracle 10 g is version 1.4 and the annotation of substitution does not exist in 1.4 since it was added in version 1.5, which is the version of the JVM using Oracle 11 g.
  >
  Is it possible to fix by changing the loadjava settings?
  >
  Non - Java 1.4 cannot, of course, supports a feature that did not exist at the time.
  >
  Is there an incompatibility between 10g and 11g?
  >
  The JVM version included with 11g is 1.5 in 10g is 1.4

  See what's new in 11g Release 1 in the Java Developer's Guide
  http://docs.Oracle.com/CD/B28359_01/Java.111/b31225/whatsnew.htm
  >
  Compatibility with JDK 1.5 Oracle JVM
  Sun Microsystems introduced new features in Java Development Kit (JDK) 1.5. To support these new features and enhancements, Oracle has updated to the last Platform Java 2, Standard Edition (J2SE) Oracle JVM.
  >

  See replacement Type Annotation in the Java API for 1.5
  http://docs.Oracle.com/javase/1.5.0/docs/API/Java/lang/override.html
  >
  Indicates that a method declaration is intended to override a method declaration in a superclass. If a method is annotated with the annotation type but does not override a method of the superclass, compilers are required to generate an error message.

  Since:
  1.5
  >
  And "' NO you can't ' is the answer if you plan to ask if you can replace the version of the JVM in 10g with 1.5 or newer.

  See my response in this thread for a few days.
  Re: uninstall the virtual machine JAVA of oracle 11g

• Resume it AGAIN APPLY: differences of 10g and 11g

  Versions > 10.2, 11.2
  OS > Solaris
  
  I have a question about step 4 below.
  In 10g and 11g versions for a physical Standby DB, you
  
  Step 1.
  Mount the DB using

  startup nomount;  
  alter database mount ;

  Step 2. Start using it to apply

  alter database recover managed standby database disconnect from session;

  Step 3. Open the DB to help ensure

  recover managed standby database cancel; -- stop the redo apply
  alter database open ; 

  Step 4. Resume it AGAIN APPLY

  alter database recover managed standby database using current logfile disconnect ;

  At this point (after step 4), version 10.2, the standby DB goes back to fashion to Mount , but DB 11.2 remains Open for READ ONLY queries because of the ACTIVE DATAGUARD feature. Am I wrong?

  Yes, you are right.

  In 10g, there is no active dataguard option (application of redo is not possible when the database is open). Application of roll forward is only possible when the backup database is in the editing phase. When the database is opened in read-only, the application mode of archive is not possible. In order to execute queries against database tables, a physical standby database, he had to stop the log apply and open the database in read-only mode. This means that the log files are waiting for this period and should be applied once the database is returned to the managed recovery mode.

  11 g, this isn't the case. It allows users to have read-only access to the pending physical databases. This option gives continuous customers the flexibility to run queries to the database physical standby, while log shipping and apply its work. The application archive is possible even when the database is open read-only. This option is called Active Dataguard (Oracle, high availability). To do this, the steps you have mentioned are perfect. It's the advantage in 11g.

• Upgrade to 10g and 11g: license cost?

  Hi guys,.
  
  We are studying the possibility of upgrading to 10g and 11g. Oracle Software Update License & Support that we currently covers 11 g at level or to buy the software from scratch as if we never had?
  
  Sorry if the question is stupid, but I never went through this process with Oracle before.
  
  Thank you!!

  In General, when you purchase a support contract, upgrades are included free of charge. It is best to contact your seller to Oracle to confirm. If you have access to Metalink (which is a good sign), you can also open an SR to check

  HTH
  Srini

• Difference between Standard 10g and 11g Standard edition.

  Hi all

  I tried Googling to find the difference between the Standard of 10g and 11g Standard editions, but couldn't find what I want.

  Y at - it links you want to share.

  Thank you

  Hello

  I tried, please check

  http://docs.Oracle.com/CD/B19306_01/license.102/b14199/editions.htm#BABJICBB (10 G based on the edition functions)

  http://docs.Oracle.com/CD/B28359_01/License.111/b28287/Editions.htm#DBLIC116 (11 g features based on edition)

  Just compare the two.

  Hope that helps.

  -Thank you

  Pavan Kumar N

• Images after upgrade to 10g and 11g

  We have recently updated to 10g and 11g, and all images are broke in the dashboard.
  
  Can anyone provide steps must be done in order to correct the broken images?
  
  Thank you.

  Put image files to

  Drive: \Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images

  Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
  If necessary
  Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images

  Call using fmap
  Syntax: fmap:images / imagename.imageformat
  for example: fmap:images / geograph.jpg

  Mark correct/good so pls help

• Upgrade to DB 10g and 11g

  Hi guys,.
  
  Current version: 10.2.0.5
  Target Version: 11.2.x.x
  
  I intend to improve my DB from 10g to 11g.
  Before the actual upgrade, I can create a test 11 g environment.
  
  I've read a few articles and understand the following concepts
  1 create a set of tuning in current 10 g to capture plan and the performance of the sql execution statistics
  2 export the setting of 10 g and 11 g SQL import base
  3 export all data to 10 g and 11 g
  4 to 11 g database, consider whether there is a best execution plan and accept
  
  For my scenario here, my test 11g environment is not all applications server conneecting to it.
  For my 11g generate other plans, the sql should be run at least once in 11g. As there could be a number of SQLs captured in the tuning set, how I run everything manually (via sql * more) because I did not have a request to call him?
  
  In fact, my main goal here is to compare the execution between 10g and 11g plan. Already from 9i and 10 g, I have actually generate version manually sql execution plan and compare manually.
  
  
  
  Thank you

  Have you thought about Oracle Real Application Testing - http://www.oracle.com/technetwork/database/focus-areas/manageability/rat-option-11gr2-datasheet-128580.pdf

  Lordane Iotzov

• Migration of schema of 10g and 11g

  Hello
  
  I spend about 2 GB in size of schema 10.2.0.4.0 11.2.0.2.0 helps users including expdb/impdp & his password and DBA_DIRECTORIES.
  OPERATING SYSTEM: AIX
  
  My questions are,
  
  1 > I know the OBJECT_TYPE below which we can not able to migrate using expdb/impdp?
  
  
  OBJECT_TYPE
  ------------
  INDEX
  PROCEDURE
  TYPE
  TABLE
  VIEW
  FUNCTION
  TRIGGER
  PACKAGE BODY
  SEQUENCE
  PACKAGE
  LOB
  
  2 > how to synchronize the password n/b 10g and 11g for 11g password is case - sensitive.
  
  THX,
  Gowin

  Check this link http://laurentschneider.com/wordpress/2008/03/alter-user-identified-by-values-in-11g.html

• C2664 errors after the upgrade of client db 10g and 11g

  Hi, after upgrading customer db 10g and 11g, the compiler gave errors error C2664:
  
  /************************************************************
  AddCxrCh.cpp (2071): error C2664: 'sqlglm': cannot convert parameter 1 from 'char' [513] in ' unsigned char *'
  Types of art are not related. conversion requires reinterpret_cast, C style cast or function-style cast
  make: * [AddCxrCh.obj] error 2
  ************************************************************/
  
  The same code was compiled correctly when you use the db 10g client. I know that I can easily correct this error by changing the code, but there is more than a sqlglm used instructions. I'm looking for a way that will solve the problem by changing the settings of the compiler.
  
  Thank you

  Hello

  There is a change between 10g and 11g. It is described in "Oracle 11g Pro * C nsqlprep Sqlglm issues [ID 860382.1]". The document, you can find on Metalink, aka Oracle Support.

  Herald tiomela
  http://htendam.WordPress.com

• Upgrade the database to 8i and 9i and 10g and 11g

  Nice day
  
  Hi all
  
  Please can someone help me to get a good document for the upgrade of the database to upgrade the database to 8i and 9i and 10g and 11g include prerequisites and upgrade processes and after upgrading the process waiting for your response because it required required

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14238/TOC.htm

  Concerning
  Asif Kabir