It is possible to specify a different directory URL service for a lobby phone?

Similar Questions

• oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory

  Hello

  I have installed:

  -(Oracle Linux) OL 6.6

  121 GB HD

  5.0 GB RAM

  -JDK-7u80-EA-bin-b05-Linux-x64-20_jan_2015.tar.gz (Java)

  -Fmw_12.1.3.0.0_infrastructure.jar (infrastructure)

  -Fmw_12.1.3.0.0_ohs_linux64.bin (SST)

  I try to install OBIEE, I unzip these files:

  -bi_linux_x86_111170_64_disk1_1of2.zip

  -bi_linux_x86_111170_64_disk1_2of2.zip

  -bi_linux_x86_111170_64_disk2_1of2.zip

  -bi_linux_x86_111170_64_disk2_2of2.zip

  -bi_linux_x86_111170_64_disk3.zip

  I run/home/oracle/OBIEE/Disk1/runInslaller and open the screen to select the oraInventory directory, when I click OK, the error message appears (see image below):

  

  [oracle@localhost Disk1] $. / runInstaller

  Iniciando Universal Oracle install...

  Espaço Verificando Temp: deve ser superior a 1536 MB.   Passado Reais 36602 MB

  Verificando swap Espaço: deve ser superior a 500 MB.   Passado Reais 2553 MB

  Verificando monitor: deve ser configurado para exibir pelo menos 256 cores.    Reais 16777216 Passado

  2nd para iniciar o Oracle Universal Installer from/tmp/OraInstall2015-09-13_08-13-50 h Aguarde... [oracle@localhost Disk1] $ 13/09 / 2015 20:13:53 oracle.as.install.bi.util.ConsumerUIProperties getCustomPropertiesFilename

  INFO: Using a custom UI properties of the oracle/as/install/bi/config/consumer-ui.properties file

  [ERROR]: error initializing log values

  oracle.as.install.engine.exception.LogInitializeException: Espaço insuficiente para criar os log archives na Localização address para o inventario. Espaço shouts ob o inventario especificado/home/oracle/oraInventory UO aponte para outro inventario

  to oracle.as.install.engine.logging.EngineLogHelper. < init > (EngineLogHelper.java:65)

  at oracle.as.install.engine.logging.EngineLogHelper.initialize(EngineLogHelper.java:192)

  to oracle.as.install.engine.InstallEngine. < init > (InstallEngine.java:135)

  to oracle.as.install.engine.InstallEngine. < clinit > (InstallEngine.java:130)

  at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:603)

  In English:

  oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory

  What can be?

  Well, you very probably not a lot of space on the left under/Home.

  You can move to another location that is located on/home/oracle/orInventory the / partitioning of the partition where you probably have more space left if you used the default value.

  For example, as a root user:

  mkdir/U01

  MV/home/oracle/oraInventory/U01

  Update /etc/oraInst.loc and replace

  inventory_loc = / home/oracle/oraInventory

  with

  inventory_loc = / u01/oraInventory

• Cannot specify a different location for multiple-image backups.

  I want to record several image files on an external drive (which can contain a large amount of data)... It was suggested to specify a different location for the second image... but when I run the process of backup image... first a screen shows my external drive where the image will be stored... but then the screens seem to just continue to do a backup. I don't see any place where I can change the location of the image... It keeps on the re-write on the last saved... image I think that maybe you can change the location of the regular backups... but not for the image file... its on another screen or buried somewhere... the help screen with "attention, images can be replaced" is meaningless for me... I thought he said that it would only replace old images if there is not enuf room on the disc.

  thanx

  Steve

  Hello bichon,

  Thanks for posting on the Microsoft answers Forum.

  Look at the post below which asked questions on images and backup locations.
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/338e311d-c0fc-4c56-a4c2-b25a7028188b
  With this option, below is where you can make changes.
  Select the drive to destination or optical disk or network location to store backup files. (this is where I want to change the destination directory name).

  If please reply back and let us know if this helps answer your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot delete the file and the error is "the specified file is not valid or too long." Specify a different file name.

  Hello

  I have filenames with weird values inside (created by Application software).
  Here is an example:
  GIBtmpphoto0_11:27:16.145.png

  When I try to delete it, I have the following error:
  The specified file is not valid or too long. Specify a different file name.

  And it takes a lot of space in my hard drive.

  How is it possible to remove it?

  Thank you.
  Best regards
  Marc

  Original title: delete files with weird names

  Hello

  My corrupt files are found on a disk of material on my computer.
  I have re-formatted the full disk to remove these files.

  Best regards
  Marc

• Is it possible to assign a different sound to my second e-mail account?

  I have two email accounts set up and works fine in Thunderbird. My main account, which I use for almost everything and a second account that I use for video surveillance and I was wondering if it was possible to assign a different sound to the second account.

  You can try this addon, it seems to be mixed results.
  Hard to know if it had fallen to not properly configure the user.
  I have not used it myself, but it must be worth a try.

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/mailbox-alert/

  How to install the Extension module:
  After you download addon extension *.xpi file to the downloads or desktop folder.

  In Thunderbird
  'Tools > "Add-ons"
  or
  'The menu icon ' > 'Add-ons'

  • Click the gear icon and select 'install module file.
  • Find the downloaded *.xpi file and click 'open '.
  • You have as much need to restart Thunderbird when you are prompted.

• E4200: Possible to specify the name of the server, but not the IP?

  With the E4200, it is possible to specify name servers without giving configuration DHCP of the modem cable to the router and go to a real static configuration? I just need to change the servers of names, and while Windows offers this possibility to specify name servers without touching the IP, I can't find a similar option in the webpages of E4200. I really prefer to do in the router, then all devices conform. I know that the cable company rarely, if ever change the IP address, but I prefer not to chance it.

  That is right. In Windows, you can control the IP address and DNS servers regardless of Windows.

  This means that you can enter the IP address manually or let get automatically. You can also manually enter the IP address of the DNS server or keep it in automatic mode.

  I think that the Linksys router, you can assign the static IP address DNS server independently. This router can get IP address automatically from the modem so you can maintain the type of Internet connection for automatic configuration DHCP.

  Is there an option on Linksys router to set static DNS servers. Under the DHCP server settings, you will find static DNS1 and DNS2 DNS3.

  To assign or DNS servers specific to computers or other devices on your LAN, type the IP addresses of the DNS servers.

• BlackBerry 8120 BlackBerry Pearl Smartphones: is it possible to have different tones for messages and phone calls?

  Hey all.

  My dad just got a BlackBerry & would like to have a different tone to his alert message and phone calls.

  Is this possible?

  If so... do we do it?

  Thanks in advance.

  Oh Yes... your alerts, ringtones and notifications are very customizable.

  1. Select the profiles icon

  2. a box will appear where you can quickly choose between Loud, vibrate, quiet, normal, phone only, and outside. If you like quick-change device profiles and select the one you want and get out.

  3. If you want to change the tones assigned to the applications in the device, and then select the last option, advanced options
  (some older models and 'Advanced' OS 4.1 and below will not step - so advanced is not present go directly to step 4 below).

  4. Select the profile you want to change. (Loud, vibrate, quiet, Normal (default), phone only, Off)
  Note: on the 8100, 8800 and 8300 models: do not click on the trackball. Instead of this, click on the menu button to the left of the trackball).
  Note: The profile that is in use will tell: (active)

  5. you will now see a list of all applications that can have an assigned tone (browser, calendar, level 1 Messages, Messages ([email protected]), Messenger, MMS, phone, SMS, job ect..)

  6. Select the application you want to change the tone / notification for

  7. you can now edit the tones of the case and Holster / notifications.
  (a) select between: none, Tone, vibrate, vibrate + tone
  (b) select the range that you want to use
  (c) Select Volume (the options are mute, low, medium, high, climbing)
  (d) to select the number of beeps (the options are 1, 2, 3)
  (e) select Repeat Notification (options are None, flashing LED)
  (f) if value vibrator or vibrate + tone and select number of Vibrations (the options are 1, 2, 3)

  8. repeat a to e for each of the applications set out in number 5 above

• possible to have 2 different application fields for two different clips at the same time

  Hello

  possible to have 2 different application fields for two different clips at the same time for the classification match in terms of the scope, only not to the eye?

  Not that I know of.  And Yes, it would be very useful. As would the ability to go back 2 in reading monitor and a button "game clip under the read head 1. Sigh.

  Neil

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  Select the reference image and choose window > secondary display > Magnifier (locked). Now the image you want to change, and start working. You can refer to the secondary display window while you work on the image you are editing,

  If you have a second monitor attached, the entire second monitor may be the secondary display.

• The use of javascript to save a pdf file in a different directory and generating a new file based on the form fields in the document name.

  I built the following script to create a submit button that will automatically save the document in a different directory on my computer. It will also use data form 'customer' field and 'date' to generate the file name. I printed the myPath variable, and it seems that he printed the correct string. I get the following error:
  

  TypeError: redeclaration of const path

  any help would be appreciated.

  var customer = this.getField("Customer").value;

  var date = this.getField("Date").value;

  var path = "C:/users/lead/My Documents/Test / '.

  Reg = date.match(/(\d+)\/(\d+)\/(\d+)/ var);

  var myPath = "C:/users/lead/My Documents/Test /" client + '_' + reg [1] + "." + reg [2] + "." +

  Reg [3] + ".pdf";

  this.saveAs (myPath);

  Thank you. It turns out that simply remove this additional path variable does the job. I used that in an earlier version of my code and I forgot that this is. My syntax also seems to be right.

• Is - it possible/supported to join a vCenter Server Appliance for a Small Business Server 2011 Active Directory Windows?

  Hello experts,

  I wonder if it's possible/supported to join the vCenter Server Appliance for a small business 2011 Active Directory Windows Server (basically a Microsoft Windows Server 2008 R2 Active Directory).

  Any help will be greatly appreciated.

  Thank you and best regards,

  Massimiliano

  You can... However, it would be, at least in what we saw, more easy to reach the device in the announcement via the CLI

  http://KB.VMware.com/kb/2002626

• Is it possible to specify more illustrator with angles? If I type 6.713, goes to 6.71. It must be 6.713 to complete the circle perfectly. A plug-in, perhaps?

  Is it possible to specify more illustrator with angles? If I type 6.713, goes to 6.71. It must be 6.713 to complete the circle perfectly. A plug-in, perhaps?

  PG,

  There is a small inaccuracy in the use of 3.14 for PI (1/2000).

  But the 6,684 angle seems to be an arbitrary angle defined by a certain arc and RADIUS, no matter what result to divide a circle into regular pieces, is that correct?

  I just did a test which you can also try: drag a line with the line Segment tool, then object > transform > rotation insert 10/3 ° (the dialog box indicates 3.333), then repeat twice, then drag a line on top (Smart Guides say anchor at both ends), and then double-click the Segment of line on the artboard tool to express the angle (of the three rotations of 10/3 degrees) , and it's 10 degrees, No 9.999, is precise and not influenced by the flare in the area.

• Data is stored in a different directory

  Dear viewers,

  I was able to export the dump with success for the Oracle 11 g rel 2 on windows machine. But the problem is that the dump file is getting stored in the different directory.

  The dump file is get stored in C:\app\machine\Datapump_testing instead of C:\app\machine\Datapump_testing\DP? What could be the reason?

  I followed the steps below:

  SQL > create directory RFP as "C:\app\machine\Datapump_testing\."

  Created directory.

  SQL > grant read, write ON directory DP in the South;

  Grant succeeded.

  SQL > home

  Microsoft Windows [Version 6.1.7600]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\app\machine > directory-South/South expdp = DP

  Export: Release 11.2.0.1.0 - Production on Sun Sep 1 11:23:16 2013

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit

  Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  From "the SOUTH". "" SYS_EXPORT_SCHEMA_01 ': South / * directory = DP

  Current estimation using BLOCKS method...

  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA

  . . exported "SOUTHERN". "' SOUTHERN_ORDERS ' 114 lines 17,96 KB

  . . exported "SOUTHERN". "' SOUTHERN_PRODUCTS ' 41 lines 8,742 KB

  . . exported "SOUTHERN". "' SOUTHERN_SUMMARY ' 6,140 KB 9 ranks

  Table main "SOUTH". "" SYS_EXPORT_SCHEMA_01 "properly load/unloaded

  ******************************************************************************

  Empty set of files for the SOUTH. SYS_EXPORT_SCHEMA_01 is:

  C:\APP\MACHINE\DATAPUMP_TESTING\EXPDAT. DMP

  Work of the"SOUTH". "" SYS_EXPORT_SCHEMA_01 "carried out at 11:23:47

  Rgds,

  Philippe

  Hi Kameshi,

  For your question is because you created the directory on:

  SQL > create directory RFP as "C:\app\machine\Datapump_testing\."

  make sure that you create the directory only:

  SQL > create directory RFP as "C:\app\machine\Datapump_testing\DP."

  I hope that answers!

  Thank you &

  Best regards

• How can I specify the installation directory for the packages installed on Windows clients?

  This article (Creative Cloud help |) Create or modify packages) mentions that you must specify the installation location on the command line in Windows for CC packages:

  
  

  Installation location

  The Application Manager offers you the following options for the deployment location:

  • Deploy to the default directory of the application: The default player is system unit; the default path is \Program Files in Windows/applications under Mac OS.
  • Directory to specify when the deployment: Allows users to end to specify the installation path when the package is deployed. On Mac OS, users are invited on the user interface, while on Windows, it's a command-line only option.
  • Specify directory: enter the path to the location to a specific installation location

  I have chosen "Specify the directory for the deployment" when I built the package.  I also added parameters for deployeur batch of Exceptions (Creative Cloud help |) Using Adobe deployeur Exceptions) indicating the installation location for the exceptions.

  How to access the command line options during install?

  • I tried setup.exe /?, and setup.exe -?, and the installation continues straight on the pilot of c: (small SSD drive; need to install on the 1 TB SATA drive on the HP workstation).
  • I looked for the MSI command line options, and there is not to change the installation location.

  There is a post somewhere that explains it?  I had no luck with my research in the forums on the web.

  When the "Specify the deployment directory" configuration is selected then you may need to use a deployment tool to deploy this package and need to call for the installation .msi.

  I hope that under Microsoft section can help. It has all the command line to install msi.

  http://TechNet.Microsoft.com/en-us/library/cc759262%28WS.10%29.aspx#BKMK_SetLogging

  Thank you

  Ashish