Is it possible to specify more illustrator with angles? If I type 6.713, goes to 6.71. It must be 6.713 to complete the circle perfectly. A plug-in, perhaps?

Similar Questions

• IPod touch 6 generation is passed in brick mode and I restored with put it in dfu mode and restored factory via itunes and it says that it has completed the restoration. And it the ipod starts up and has the apple logo and a loading bar which is st

  IPod touch 6 generation happened in brick mode and I restored it by the he output in dfu mode and restore to the factory via itunes settings and it says it has finished restoring. And the ipod starts up and has the apple logo and a loading bar that do not move and it's stuck and it's been a week and I've done this process over and over

  Hi, Slkdogg1.

  Please visit Apple support communities.

  I understand that you cannot restore your iPod touch, and it looks like it is stuck on the Apple logo with progress bar.  I would like to start by going through the steps outlined in the article below.

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch

  If this does not resolve the problem, try to go through the troubleshooting steps in the articles below.

  Solve the iOS update and restore error in iTunes

  Resolve alerts related to USB in iTunes

  See you soon

• My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?

  My camera Olympus only works with Apple's Quick Time 7.  Is it possible to make it work with my operating system from Windows XP?

  Apple QuickTime 7 works is because. MOV is the Apple
  QuickTime format.

  QuickTime. MOV files can cause problems with Windows Media Player.
  And... If you plan to try editing with Movie Maker... the files should
  be converted to the. WMV format.

  No guarantee, but the following decoder might allow Windows Media
  Reader to read your. MOV files. Only problem is... it is not freeware to retail.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.4 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Convert the. MOV files to the. WMV format may be worth a try:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck

• Cannot run Illustrator with VBSript

  Hi, I can't connect to Illustrator with vbscript.

  I am running CS5 on Windows XP.

  When I try to execute the following basic script:

  Set appRef = CreateObject ("Illustrator.Application")

  I get the following:

  

  However, the same line of code start Photoshop and InDesign without any problem.

  Hints would be appreciated.

  Thank you

  Geordie

  see if that helps

  http://forums.Adobe.com/thread/753357

• is it possible to save files in illustrator with the trial version a month?

  is it possible to save files in illustrator with the trial version a month?

  Yes you can, but also easy to ask the question. Download the route and try it

• Can you start CC2014 Illustrator with more RAM?

  I use Illustrator for editing SVG very large (> 150 MB) files, and the software is extremely slow and unresponsive more regularly, even if she (slowly, slowly) acquires more RAM. Is there a way to start the Illustrator with a larger amount of RAM, e.g. 8 or 16 GB?

  I'm working on a MacPro with 32 GB of RAM, two 6-core processors, a videocard of NVIDIA Quadro K5000 (4 GB RAM) and tons of free space on the disk. It's very frustrating to see Illustrator is not taking advantage of the available machine resources! I scoured the web for solutions and come empty-handed... Any tips?

  There is nothing you can do. Although you can assign a range of fixed memory, the program would still need to load the objects one by one and make them, so in fact, there is no same sense to think about it this way...

  Mylenium

• Is it possible to access more than 2.5 GB of ram for first with my current setup?

  Hello

  I'm on Win 7 64 bit and I have 4 GB of Ram. In CS5, it indicates that 2.5 will be dedicated to the creation and 1.5 will be spent on other programs. When I try to change the amount of Ram (increasing the amount of first/lower the amount other programs), it does nothing.

  Is it possible to access more than 2.5 GB of ram for first with my current setup?

  Thank you

  Taking the memory of other software means carrying the memory of things such as the operating system. You really, really want to go too low with that. It would also cause your applications to fight for RAM, causing the contents of the RAM be exchanged on the hard disk, which is one of the worst things possible to do to your performance.

  If you want more RAM available for Premiere Pro, and then install more RAM.

• Not possible to burn a CD with Windows Media Player

  Windows Media Player in windows 7

  All of a sudden CD burning became a problem. After I insert a disc in the drive, a message appears indicating that I need to insert a disc or another message will specify that windows does not detect the cd or windows media player does not detect the disc. I don't know what is happening. I need help!  Thanks, Lindalooloo

  Hello

  Close WMP and all players and burn programs. Click with the right button on taskbar - task manager - process
  Tab - search for WMPlayer.exe and if it COMPLETED the PROCESS on this subject.

  Now stick to a CD and what happens?

  --------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Is it possible to set up workstations with 2 or 3 monitors each in MultiPoint Server 2011?

  Hello everyone!

  I have studied MultiPoint Server documents, but have not found the answer: is it possible to set up workstations with 2 or 3 monitors each in MultiPoint Server 2011? For example I have computer with graphics HD6970 and HD4790 (more HD4290 on board) and to 'split' in several positions - a high performance graphic with 3 monitors and 2 connected to HD6970 or 3 other workstations for internet/treatment of text with each, a lcd panel connected to HD4790 and HD4290 cards. So I could build small desk with a powerful station :).

  In other words, using windows terminology guide, one might wonder it is able to have the teachers with more than one monitor computer, while students have jobs with a monitor?

  (Subsidiary question is: what Eyefinity, is working for MultiPoint - assuming that the station with more than a graphics card?) Can't find any information in the deployment also guide).

  Kind regards

  Maciej

  Please transfer your inquiry in the most appropriate in Forum Windows Multipoint Server.  Thank you!

• Is it possible to install Windows XP with USB / (Pendrives) with a CD?

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  Installation of Windows Xp from a usb key involves a lot more than simply copy the files from one windows on a USB disk. It is much more difficult than don't imagine most (but not impossible). I did it a few times. Read the instructions on the two links below. The first link below is your best bet. You are not likely to do things immediately. It's ok, we are here...

  Install Windows XP using USB Flash disk / Flash Drive - step-by-step Guide

  Install XP from USB - reboot.pro

• E4200: Possible to specify the name of the server, but not the IP?

  With the E4200, it is possible to specify name servers without giving configuration DHCP of the modem cable to the router and go to a real static configuration? I just need to change the servers of names, and while Windows offers this possibility to specify name servers without touching the IP, I can't find a similar option in the webpages of E4200. I really prefer to do in the router, then all devices conform. I know that the cable company rarely, if ever change the IP address, but I prefer not to chance it.

  That is right. In Windows, you can control the IP address and DNS servers regardless of Windows.

  This means that you can enter the IP address manually or let get automatically. You can also manually enter the IP address of the DNS server or keep it in automatic mode.

  I think that the Linksys router, you can assign the static IP address DNS server independently. This router can get IP address automatically from the modem so you can maintain the type of Internet connection for automatic configuration DHCP.

  Is there an option on Linksys router to set static DNS servers. Under the DHCP server settings, you will find static DNS1 and DNS2 DNS3.

  To assign or DNS servers specific to computers or other devices on your LAN, type the IP addresses of the DNS servers.

• BlackBerry smartphone Podcasts downloads fail more often with the app native podcast

  I always use a Pearl 3G with OS 6. I use it every day to listen to podcasts and books while I'm working. The last few months I had several podcast subscriptions fail to download some episodes. The subscription xml links are still good for some of them that I sometimes get the automatic download of a new episode. When I go on ' restart any missed "they try again several times and eventually fail without any error messages so I can't understand what is happening. What that this be amended to how work year last RSS podcast feed?

  I think I use version 1.6 of podcast. It is what came with the operating system, and then put through the appworld and did not have an update for years.

  My memory card is not full.

  I tested for problems of connection and insured that I was connected several times in a new attempt to download has failed.

  More big podcasts of other links rss download, so I don't think it's a size cap.

  Is it possible the length of file name or characters are a problem?

  Edit, for example, if someone listens to IdleThumbs.net, I get many episodes ignored their RSS feeds in particular.

  So, I went from Mobilicity as a supplier to the WIND and now download all my podcasts. At my data provider blacken my downloads somehow? Looks suspicious, even if there was swap wireless spectrum goes on in time between providers of cellular services, which is the reason why I've switched back to wind in the first place (and because Rogers bought Mobilicity).

  I downloaded 1.2 GB of podcasts delayed the day after the passage of data providers until my battery ran out.

• Is it possible to manage more finely the seek slider bar in Windows Media Player?

  I cannot using the seek slider bar in Windows Media Player with the arrow keys.  Is it possible to manage more precisely where the cursor is moved using the keyboard?  Now, to jump back and forth when I use the arrow keys.

  Thank you!

  I cannot using the seek slider bar in Windows Media Player with the arrow keys.  Is it possible to manage more precisely where the cursor is moved using the keyboard?  Now, to jump back and forth when I use the arrow keys.

  Thank you!

  CTRL + right arrow	Next playlist in the playlist history	Focus not on the search bar
  CTRL + left arrow	Previous playlist in the playlist history	Focus not on the search bar
  CTRL + right arrow	Jump forward (large increment)	Focus on the search bar
  CTRL + left arrow	Jump backward (large increment)	Focus on the search bar
  Shift + right arrow	Jump forward (small increment)	Focus on the search bar
  Shift + left arrow	Jump backward (small increment)	Focus on the search bar
  Right arrow key	Jump forward	Focus on the search bar
  Left arrow	Jump backward	Focus on the search bar

• Hi, is it possible in 2014 CC Illustrator to increase the size of Panel of police find so I can see the full name of the police? Thank you

  Hi, is it possible in 2014 CC Illustrator to increase the size of Panel of police find so I can see the full name of the police?

  You can see on the screenshot below fonts with longer names are not displayed, I know you can see an excerpt from the police, but that slows down and me its not practical!

  Concerning

  

  Hi emiltsonev,

  We do not have an option to increase the size of this Panel. You can use the slider on the right to scroll.

  Thank you

  OM

• How can I control Illustrator with Powershell?

  I need to automate the conversion of images SVG to monochrome TIFF with Group 4 compression. Illustrator is the only tool I found which allows convert SVG files, that I work with precision. I want to automate the process by using Powershell. Is there a more appropriate tool to use for this task than Illustrator? If so, what is it? Otherwise, there are examples of control Illustrator with Powershell?

  at the base...

  $iapp = New-Object -ComObject Illustrator.Application
  $idoc = $iapp.documents.add()
  $itext = $idoc.textFrames.add()
  $itext.contents = "Hello World from PowerShell!"