It's as possible use IN the operation in view criteria?

Similar Questions

• Satellite U400-124: is it possible to restore the operating system without the DVD

  I have a U400-124 I want to do a system restore.
  I created the Toshiba Recovery DVD but I don't have it with me (I'm in Italy and it is in the United Kingdom).

  I have three left:

  1 Vista (c :))
  2 WinRE (d :))
  3 data (e :))

  Is it possible to restore the operating system without the DVD?

  Also, what exactly are leaving them? I'm not wrong!
  1 Vista (c) - for the operating system
  2 WinRE (d) - is a hidden partition and it is necessary for the backup files in Vista
  3. data (E :) - contains the record of recovery

  Sorry for my lack of knowledge! Thanks for all your help in advance!

  > Is it possible to restore the operating system without the DVD?
  This is possible only if the second partition and HARD disk recovery file has not changed

  Start the Toshiba HDD recovery procedure by pressing the F8 key.
  A start menu should appear, then you should choose the first option called fix my computer.
  Then it should open a new window with an option called Toshiba recovery.
  Choose that and usually drive HARD recovery must begin.

  Good bye

• Soeome has a list of all the regional settings valid which can be used in the operation of valid sendDocument API?

  I have to build a validadion on my side and I would like to know the complete list of 'local' valid codes that can be used in the operation of sendDocument API.

  Thank you!

  en_US, en_GB, de_DE, fr_FR, nl_NL, it_IT, fi_FI, da_DK, sv_SE, es_ES, nb_NO, nn_NO, no_NO, pt_BR, pt_PT, ru_RU, is_IS, ja_JP, zh_CN, zh_TW, ko_KR, pl_PL, in_ID, ms_MY, vi_VN, th_TH, en_US, tr_TR, ca_ES, eu_ES, hr_HR hu_HU, ro_RO, sk_SK, sl_SI, uk_UK

• Is it possible to have the ability to view the embedded jpg that is contained in the RAW files in the future.

  Is it possible to have the ability to view the embedded jpg that is contained in the RAW files in the future. I tried in the community, but there are very old post. The LR previews do not have clarity which is displayed by the JPG NIKON D7000. For the first selection is the most important properly see the Embedded file.
  Thank you

  Course as possible. You add your voice to http://feedback.photoshop.com. I'm sure there's other sons it suggests the same thing. This forum is a user to user forum, and there is not a lot of real Adobe engineers around. Feedback forum Adobe engineers actively seek suggestions to implement and to fix things. Here, it's really help people with the help of Lightroom.

• Possible to downgrade the operating system?

  Hello experts,

  My Macbook is a 13 "early 2009 (Core 2 Duo 2.0). I have 6 GB of RAM (recently installed the last 2 GB).  Currently, the operating system is OS X 10.11.3.  I think that since this OS has been installed (a few months ago) the machine has slowed down considerably.  "Outputs page" is almost always up.  I re - often starts to get "page outs" to reset, but they will soon get back to the top.  Almost any process bothers me a lot of activity "beachball".  My main use for this computer uses iPhoto to show slide shows to various groups (I have not found that the Photos should be for various reasons).

  I know that this is considered a 'old' machine, but since it is my secondary computer I would not spend the money on a complete replacement.  Is it possible to go back to an earlier version of Mac OS X? That could accelerate or put less strain on, this Macbook?  If I could go back to 10.10 or 10.9 How would I do it?

  Thank you

  JimH

  Your computer will be not a faster were no you downgrade OS X. There's nothing wrong with El Capitan. Page Outs increase because you don't have enough RAM and try to run too many processes simultaneously.

  If you want to demote to an increase in performance, and then wipe the drive and install Snow Leopard.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• Any possibility using only the built-in GPU?

  Mac OS X 10.11.6

  MacBook Pro(Retina,15 ",2015 mid)

  With graphics cards AMD one dedicated

  I wonder if it is possible to use only the GPU integrated while playing games. Cause I discovered that some games are no need to use the AMD GPU, but it is automatically switched to the dedicated GPU and drains the battery.

  Hope there is a solution for this problem. Thank you!

  It is somehow a conditional scenario suggested in this article

  on how to make some graphics settings may remain in service, here:

  • Set performance on MacBook Pro - Apple Support chart

  • MacBook Pro: how determine what GPU is in use - Apple Support

  {These links seem to show older versions of material your model}.

  Don't know if there is a way hidden within the system to change the default to

  stay on the one you want to be the first choice; Maybe in the command 'terminal '?

  In any case...

  Good luck in this case!

• Is it possible to determine the operating system?

  Is it possible to programmatically determine the operating system of the computer that runs an executable of LabVIEW?

  And just in case where you need to know how to say GerdW

  

• "Question of possible priority with the operator to control flow.

  Hi guys

  I have the following problem:

  Yesterday, I did an upgrade from debian wheezy distribution Debian jessie.

  Since then, I had a problem with a plugin which I use for Icinga a surveillance system.

  When I run it, I got the error that there is a 'undefined subroutine.

  I read on google that I can fix it, with resettlement vsphere SDK, but the installation blocked to "CPAN is to download and install the pre-requisites Perl module"SOAP::Lite.

  Can I skip this step with Ctrl + C, and at the end he says «this Setup program has installed successfully...» ».

  
  

  But when I run the Plugin I get the error message 'problem priority Possible with operator control in the /usr/share/perl/5.20/VMware/VICommon.pm line flow 2147' and the whole stucks plugin.

  I tried the next step that I found in this forum and the error message does not appear, but the stucks again plugin...

  Re: VMware-vSphere-Perl-SDK-5.5.0-1384587 broke up with perl 5.20

  I also have Perl 5.20.2...

  Can you guys help me?

  Vinzenz

  OK I could fix it...

  I changed the line 2147

  "

  return (meaning $user_agent-> cookie_jar and)

  $user_agent->-> as_string cookie_jar don't ");

  "

  And this time I waited for a long time and I get an error message that there is a problem with the SOAP.

  The solution was to downgrade Net-HTTP and libwww-perl with the following commands:

  Perl - MCPAN-e shell

  o conf urllist push http://backpan.perl.org

  install GAAS/Net-HTTP-6.03.tar.gz

  install www-perl-6.03-tar.gz GAAS/lib

  The second command loads the old versions of the urllist.

  Thx for your help and I hope that I can help others with the same problem.

  Vinzenz

• Conversion of language according to the use of the operating system.

  Hello

  I have a project in c generating a list of events that all events are in English and then I put these events alongside a db file,

  I want to run this project on another language (German/french) operating systems

  Now I want a c code which convert my french/German English test before sending the event to the db file.

  If possible please send me code as soon as possible

  Thank you:

  Sunil

  Hi Sunil,

  I suggest you post the same question in the Microsoft MSDN forum for assistance.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• [ADF, JDev12.1.3] 'BTF as train': is it possible to use routers and operations between views/stops?

  Hallo,

  I need to create a working group while the train with 4 stops.

  The page showed in the 2nd stop should be based on a choiche which makes the user in step 1:

  Option_1 involves using trainStop_1.jspx as point of view for the 2nd stage

  Option_2 implies to use trainStop_2.jspx.

  Option_3 means to use trainStop_3.jspx "" "" "

  
  

  I thought to create 3 times (one for each page jspx) and to use a router to display the correct view, but it seems that the router does not allow a created task force so that the train.

  
  

  In addition, between the 1st and the 2nd stop, I need to call the createWithParams operation that has 1 parameter whose value are known only after the user makes the choice of the 1st stage.

  
  

  If you kindly could help solve this issue?

  
  

  Thank you

  Federico
  

  Yes, you can:

  http://www.techartifact.com/blogs/2012/11/method-call-between-train-flow-in-ADF-techartifact.html#sthash.FMOsLwb4.DPBS

• How many processors the TimesTen on Exalytics can be used for the operation of 1 request?

  Dear

  I am analyzing the deployment scenario (2 t, 40 processors) Exalytics cluster - two machines.

  After reading the discussions on this forum and a part of the documentation available for my Oracle Partner login information.

  A doubt is:

  When you run SQL against TimesTen.

  To search for and return the data - OBIEE server, the TimesTen will use as many processors in this operation?

  Thank you

  MMB

  TimesTen (11.2.2) currently does not support a parallel query, so a single query will use one processor, but it will still be very fast because of the nature in memory of TimesTen. And you can run 40 these applications simultaneously without overloading the machine.

  Support for a parallel query is in our roadmap for a future version.

  Chris

• Satellite A60 overheating - not possible to recover the operating system

  Hey there,

  I'm almost certain I have a hardware problem with my Toshiba A60. Explorer.exe has stopped running, doing system restore helped for a while, but he just kept happening again. System Restore loses all its points of restore, safe mode did not help at all. I managed to back up everything and went to the Toshiba Recovery CD.

  He managed to kill everything on my internal hard drive (or at least enough that it no longer starts), but effective recovery program only happens to about 12% then goes to a black screen, it's the same thing if I try to use expert mode on the recovery CD. Also, the laptop overheats a lot. I am so sure that it's a hardware problem.

  In any case, according to the website my warranty expired 08/2005. I just wanted to know if there is any way I can contact Toshiba? Most of the companies at least listen to you if they sold you a product that overheats and breaks (even if he does that the expiration of the warranty).

  Yet, it was the closest I could find on a "Contact us" page (other than the all-in-one phone number). Even if I can't get it fixed for free I wanted to know if there was any kind of paid service. Can I get any help? With the contacting Toshiba, I have not the strength to try something new with my laptop now that he can only boot from a CD and that done correctly.

  Thank you very much
  Andrew

  Hello

  I contacted Toshiba service partner in my country if I had a problem with my laptop. I think you should also ask the authorized assistance service provider. Don t contact one of Toshiba because most of the time, go to the point service.

  I found this link that will help you find the right provider in your country:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  But if you laptop overheating then you should check the cooling modules, if there is no dust or / and debris. Especially books of overheating because the cooling modules will not twist correctly and the air circulation is compromised.

• Pass a parameter to a function to use AS the operator in

  I'm trying to pass a parameter to a function that uses the LIKE '% name_in % ',.
  I don't know how to use...
  
  the setting is called "name_in".
  
  
  Thanks in advance,
  M

  Hello

  Mehrdad says:
  I'm trying to pass a parameter to a function that uses the LIKE '% name_in % ',.
  I don't know how to use...

  the setting is called "name_in".

  Your code should say:

  ... LIKE '%' || name_in || '%'
  

  If name_in is inside the single quotes, it will mean the 7 characters literals 'n', 'a', ', 'e', '_', 'i' and 'n'.
  You want to refer to the variable named name_id, in order to keep the name of the variable outside of the quotation marks.

• the use in the operator not to take value of list item

  Hi gurus,
  I have four types of employees
  such as 'C' for consultants, the from ' for the staffs, 'W' for workers, ('E', the of ',' W') for all types of employees.
  I write four queries to show four types of employees.
  can it is possible in a single query.
  
  Please guide me...
  
  I wrote this in oracle forms
  I took a list item for the workers, I took 'W', for the staffs, I took the of ' consultants, I took 'C' and for all I took 'A '.
  my column name is emp_type in (: block.list_item)
  but it does not have the value of the list item when the value is emp_type, in('C') etc etc...
  same for workers, the staffs.
  When he is 'A' it will be emp_type in ('E', the of ',' W')
  
  Please answer...

  where did you put that "emp_type in...". "- thing? In the WHERE clause of the blocks? Also, check the value of the SYSTEM. LAST_QUERY after the query has been run.

  Published by: Andreas Weiden on 07.07.2011 19:52

• The use of the operator & quot; & gt; & quot; or & quot; & lt; & quot;

  Hello
  
  I'm writing this code to determine the "activated" value of a button in mxml:
  
  < groupName = "idAddr" mx:RadioButton
  label = "address".
  labelPlacement = "right."
  Enabled = "{numPeople.SelectedIndex < 2}
  / >
  
  When I save, I get this error: ' the the 'active' attribute value must not contain the ' < ' character. "
  
  Can someone tell me why? And if not, how can I do to enable value?
  
  Thank you!
  
  
  
  

  Because of the rules for xml documents well trained.

  Use entities for common XML markup characters intersecting with mathematical symbols.

  http://www.evolt.org/article/A_Simple_Character_Entity_Chart/17/21234/

  <<><>< less-than="">
  > > sign grand superior

  It must be transformed into good math symbol Action script at compile time.