It's "DeviceInfo.isSimulator ()" is a lot of time...

Similar Questions

• Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the fleeting problem.

  Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the rest of the problem.
  As a test, I downloaded Chrome and it is much faster.
  But I love FF and would be very happy if you can help me solve this problem.

  Hi Reos,

  When you reinstall Firefox it always uses your old profile with all the old things that you had. That said, you're lucky, there is a new feature that lets you "Reset" of Firefox. This will remove some of the pieces that might cause problems while it keeps your bookmarks and other important things safe.

  Check it out and let me know if it works: Refresh Firefox – reset the parameters and modules

• When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time

  When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time. Why?

  Hello

  Did you do last changes before the show?

  I would like the season you follow the steps in the link and check if that helps.

  Method 1: Perform a boot clean and chcek if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Once the diagnosis has been made, make sure you try the step to configure Windows to use a Normal startup state in the article in order to reset the computer as usual.
   
  Method 2: You can also check out the link and check if it helps.
  Advanced Troubleshooting for General startup problems in Windows XP

• Windows 7 and update MSSE take a lot of time

  Hi, I have reinstall my windows 7. But, when I try to check the updates he comes to see the verification of updates for a long time. I'm trying to update Microsoft Security essentials too, but it just search for updates and it takes a lot of time too. But, when I restart the Windows Update service, and then start the download of the Microsoft Security Essentials updates and install it, but not for windows, it keeps looking for updates when I try to update. Microsoft Security Essentials does not download the update that automatically even my computer is connected to the internet, I have to press the Refresh button on MSSE, and sometimes I need to restart the windows update service too.

  When I do the update for windows for the first time, Windows update tell me to install the Windows Update Agent 7.6.7600.320. And install it.

  Please, please help. Any who...

  See: search for Windows updates takes forever?-a possible solution

  See also Windows 7 update holding scans always? KB 3153199 can solve the problem

  ===

  Update Microsoft Security Essentials FAQ

  Microsoft Security Essentials consolidated FAQ

  Troubleshooting General error while updating

• How do to this chain operation looks simple but causing a lot of time to do :)

  Hi all

  I have a very large chain, i.e. the soap xml response send by server that I read once connected to the server using http, now the problem is that I need to create a Document out of it and analyze what is simple but the answer I get server requires many replacements of string as example 1) replacing "<" with "<"  2)="" replacing="" ">"="" with="" "="">" etc before creating a document out of it now there are many such replacements in the sending of the response from server that takes a lot of time. 5 minutes on the emulator. So my question is how do? Is there a native method to replaceAll occurrences of a substring in a string or while I can use or is there another good way? Please let me know thx.

  Thank you

  Sagar

  We took over a project done by someone else, and they were doing exactly what you do.  Here is their source, which I think is more effective that you give it a try if you want.

  But be aware that I have never used or tested this code.

  I guess you pull that string to the center of your SOAP response.  It has been encoded XML.  So you can do what we did in this case and wrap the string as a data element in an XML element and then use the XML parser to get the actual data, which feed us an XML parser again to get the actual data.  XML is already set up to deal with these characters, so it was more effective than the approach to replace.  Actually to be honest, it wasn't the reason we exchanged, that as part of the parser XML meant we were convinced it was done correctly.

   public String replaceAll(String source, String pattern, String replace) {
          if ((source != null) && (pattern.length() > 0)) {
              final int len = pattern.length();
              StringBuffer sb = new StringBuffer();
              int found = -1;
              int start = 0;
  
              while ((found = source.indexOf(pattern, start)) != -1) {
                  sb.append(source.substring(start, found));
                  sb.append(replace);
                  start = found + len;
              }
  
              sb.append(source.substring(start));
              return sb.toString();
          } else
              return "";
      }
  

• Question Windows Spider solitaire game flashes and I can't move cards unless I have click or drag a lot of times.

  Original title: Spider Solitaire not good

  Spider Solitaire is flickering, and I can't move cards unless I have click or drag a lot of times.  The simple answers please because I am not technical minded.

  Hello

  ·        This only happens with solitaire and spider or other games as well?

  ·        You did changes to the computer before the show?

  Method 1: I suggest you to put the computer to boot and see if the problem still occurs.

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Update the video card driver and check if this solves the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• My win 7 laptop HP takes a lot more time at the stop

  MY LAPTOP ABOUT 4 WEEKS IT Y HAS SUDDENLY STARTED TAKING AGES TO STOP

  CONFIGURATION SYSTEM USED IVE, DISK CLEANUP, DEFRAGMENTATION IT REGUALLY.

  CAN ANYONE ADVISOR AS TO WHETHER BACKGROUND PROGRAMS COULD BE INITIALLY - AND HOW DO I FIND AND REMOVE?

  MY LAPTOP RUNNING WINDOWS 7 HOME PREMIUM SUDDENLY TAKES A LOT OF TIME DOWN

  Here's one thing you can check which will give information in some cases: http://windows.microsoft.com/en-US/windows7/Why-wont-my-computer-turn-on-or-off-quickly

• Table statistics generation takes a lot of time in 10g R2 (10.2.05)

  Hello Oracle Experts!

  Need your urgent help...

  Question - generation of Table statistics takes a lot of time in 10g R2 (10.2.05) and even ends in mnts in a different database. As well the database are hosted on the server VM, RAM, CPU, storage and database initialization parameters are the same.

  Table - size 34 GB

  Name of the table - SLPDOCTAX

  SQL - exec dbms_stats.gather_table_stats (ownname = > 'FAST', tabname = > 'SLPDOCTAX', estimate_percent = > 30, cascade = > true, level =)
  (> 5, method_opt = > 'for all COLUMNS INDEXED' granularity = > 'ALL');

  Measures taken so far-

  1. 1) checked the IO by the dd, no problems on the side of DISK command
  2. 2) use memory and CPU as normal

  Please advise what measures must be taken to solve this problem

  Dear all,

  We have identified the problem... It was the index and even has been resolved by rebuilding the index.

  Rgds

  Farvacque

• How can I change the font and size of legends? The manual says it's possible, but I lose a lot of time trying to find the way. Help please.

  The manual says it's possible, but I lose a lot of time trying to find the way. Help please.

  I think that the subtitle Editor is not very well developed, since I adapt the text, the timming, but then, text does not fit, or letters are very separated... and I can't work out these details.

  Thank you

  I don't think that you can change the size of the police with captions. I think that because it is a 'standard' you are limited to what this standard supports only. If the manual says: you can change the font size then it probably still says: you can change the fonts familty. I was never able to change the size of police or the family. The manual should be rewritten to prevent people to mislead him.

• I tried a lot of time to download Lightroom on my MacBookPro without success. I already remove the firewall. Perhaps because of a slow connection to the Lebanon? Or another problem?

  I tried a lot of time to download Lightroom on my MacBookPro without success. I already remove the firewall. Perhaps because of a slow connection to the Lebanon? Or another problem?

  Beatricel88978029 you receive specific when errors download Photoshop Lightroom?  For more information on how to resolve errors download please see error download and installation of the creative cloud application.

• Takes a lot of time using forall delete

  Hello

  I'm insertions and deletions of rows via forall. Insert taking less time to insert the lines but by coming to

  delete, it takes more than 5 days, a lot of time to remove 18.5 millions of rows in a table using forall.

  the main table with 70 million lines.

  the code is...

  Get the ref_typ COLLECT LOOSE l_id_tbl LIMIT 10000;

  Start

  FORALL i in 1.l_id_tbl. COUNTY

  INSERT INTO change_test (id,

  history,

  transaction,

  date)

  VALUES (seq.nextval,

  "CHANGE_HIS,"

  l_id_tbl (i),

  SYSDATE);

  exception

  while others then

  null;

  end;

  Start

  FoRALL i in 1.l_id_tbl. COUNTY

  DELETE FROM change_his

  where id = l_id_tbl (i);

  exception

  while others then

  null;

  end;

  end loop;

  so please give me a good solution to remove lines of less than 5 days...

  > exception when other then null;

  Seriously. You want to REMOVE the lines, even if they did not get inserted? You don't care to if they are deleted?

• Installation... Using Windows 7 64 bit - Install takes a LOT of time... is this normal?

  Installation... Using Windows 7 64 bit - Install takes a LOT of time... is this normal?   It's been over an hour...

  then you have probably lost connectivity.  If you are using a wireless connection, try a wired.

  If necessary, you can use a download with direct download manager,

  Downloads available:

  • Suites and programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5 | 4 | 3
  • Captivate: 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• script requires a lot of time

  I made a script to check if some of the pictures are left.

  In the past, it works fine, but now I noticed, that the script needs a lot of time to complete. The VCenter CPU load goes up to that time there.

  Is this normal, that it takes so long? (37Hosts/670VMs)

  $viserver = Connect-VIServer our_vcenter
  $allvm = get-vm
  $report = @()
  
  foreach ($snap in ($allvm | get-snapshot)) {
       
       $row = "" | select vmname, pstate, created
       $row.vmname = $snap.vm.name
       $row.pstate = $snap.powerstate
       $row.created = $snap.Created
       $report += $row
  }
  
  $body = $report | ft -auto | out-string
  $smtp = new-object Net.Mail.SmtpClient(”our_mailserver”)
  
  
  $smtp.Send(”admin@domain","admin@domain”, “Snapshots”, $body)
  
  Disconnect-VIServer -Server $viserver -confirm:$false
  

  The cmdlet Get-Snapshot has some problems in PowerCLI 4u1.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Cut 1,000 LP records in securities - the simpler procedure and not a lot of time

  Dear friends,

  in the national and University Library Slovenian we would save in digital form and do the restore at least 1000 LPs. We save our LPs on our hard drive. We would then cut them into smaller units (securities). Does anyone know the simplest procedure and not a lot of time in Adobe Audition?

  For example:

  Our LP has 15 tracks. We would like to cut the LP in 15 units and if it is possible do the fade and fade out for each track at the same time. Is there any AutoPlay to make faster (not a lot of time)?

  Thank you for your response.

  National Library Slovenia wrote:

  We decided to keep the original files because they are (saved on the hard drive) and do no repairs (for example a hiss reduction, clik and pop eliminator...).

  1. we want to mark the silences between tracks (we decided do not fade and fade out)

  It's the easy bit. You select the audio with the track you want and highlight it, and then press F8. This will mark this part of the file as a "cue range" in the list of markers. It's quick and easy to make by hand, and hardly useful to automate. The reason is that you verify the results of an automated selection silence anyway (it is not infallible, especially on a file untreated LP), and audit would easily take both that just do this manually (a few seconds work). When the selection is displayed in the list of markers, then you can give it a name. If you don't want to give it a name that is fine - but even if you will without a doubt index this anyway, I still would do it, simply because it is without ambiguity.

  2. and then find ther simpler and faster procedure to record the tracks with ther of individual names (example: track_001.wav, track_002.wav, track_003.wav) in a single folder. Is it possible to make the second stage with a single click?

  Now you have a list of beaches of marker in the markers list, you will find that there is a button of batch process at the bottom that you can use. This will automatically save each of the ranges mark marked in a separate file, either using name information that you have entered, or by using the schema that you mentioned above. You can choose the prefix - that could be the name of LP - and it is the tracks sequentially from any number you choose - so if you do the second side of the LP, you could start with, say, {lp-name} _006.wav. The only other thing you need to do is where you want to save the files.

• Windows 7 startup home taking a lot of time

  Hi team,
  Start Windows 7 takes a long time and its nearly 3-5 min. When I checked the event logs, I found the below error message and found a lot of timeout messages.
  "Service 'WMPNetworkSvc' not started correctly as CoCreateInstance (CLSID_UPnPDeviceFinder) has detected the error '0x80004005'. Check that the UPnPHost service is running and that the UPnPHost Windows component is installed correctly".
  "DCOM got error"1053"try to start the service gusvc with arguments" "to start the server:
  {89DAE4CD-9F17-4980-902A-99BA84A8F5C8} '.
  Also, I have my laptop always attended more than 1.5 GB of memory each time, even if I do not open any application it consumes about 1 GB.
  Could you tell me what would cause this problem and how to optimize performance.
  Thanks in advance!
  Kind regards
  ARI

  Hi Ari,

  This problem can occur because of disk space low, due to the infection by the virus, or if there are a lot of programs configured to start automatically when Windows starts.

  What is the brand and model of the computer?

  Method 1:
  I suggest to run the troubleshooter of performance and check if it helps.

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

  If the problem persists, we will start the computer Safe Mode to check if the problem occurs in Mode safe. If the problem does not occur in Mode safe, then you can try to set up your computer in a clean boot state to find what startup item or service is causing the problem.

  Step 1:
  To restart in Safe Mode, see the link.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not occur in Mode without failure, then you try to put the computer in a clean boot state.

  Step 2:
  To perform Clean boot follow the procedure below.

  Affecting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Note: Try all the steps except troubleshooter.

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Note:

  1) disk cleanup cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  2) data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Check out the link for more information.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286#method4

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.