Close and save the problem

Similar Questions

• JavaScript, close and save the changes without dialogue of JPG quality

  I'm working on a script that exports the images in Illustrator and resize them in Photoshop to be at the right height/width/dpi that we need. I send the command through BridgeTalk and resizing works great, but when I try to use doc.close (SaveOptions.SAVECHANGES); PS stop on each image with a JPEG quality dialog box.

  

  Is there anyway around this dialogue? I know that I can make a record under, but that forces JPG as the file type and sometimes we export png using the same script, then it becomes a much more complicated script if I add conditions and to save the options for the types of files and send them via the deck. I just want to save what he was already of file format and keep moving forward. Is there a force save that overrides dialog boxes? I also tried a line of code to disable (displayDialogs = DialogModes.NO) dialog boxes, but this does not work either. Is it possible to get around this problem or I have to go the other way and make the conditional script and use Save as. The annoying part is that it works perfectly for the png! Thanks in advance for any help!

  When I run your code on a jpg document that had been saved by Photoshop in the past.  Here I open a jpg file that has been saved by Photoshop and use to adapt the image to resize the image and to run your code, close "app.activeDocument.close (SaveOptions.SAVECHANGES)" I don't get no quality POPUP dialog.  It must be because your file was saved by the Illustrator in jpeg format with the Photoshop doesn't know what quality the jpeg file.

• close and save the settings

  Shutdown laptop it does not say which records more parameters.

  That's what it came with. Don't know what to do.

  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32 >

• computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing. How can I save this monster?

  computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing.  How can I save this monster?

  Hello

  First, disconnect all the external devices connected to the computer, and then try to start and check what is happening. If the same happens, then you can try to start in safe mode and check if you are able to boot to the desktop. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I have 2 or more tabs open in my browser I want to close Firefox and save the tabs so when I open it again the sites will return. Use to do this, but something needs to happen. begin to close, now it asks me if I want to save sites

  When I have 2 or more tabs open in my browser I want to close Firefox and save the tabs so when I open it again the sites will return. Use to do this, but something needs to happen. begin to close, now it asks me if I want to save sites

  If you still want to open the sites that you opened before, in the Options dialog box, go to the general Panel and make sure that the parameter 'When Firefox starts' is set to ' show my windows and tabs from last time '. You will not be asked to save the tabs because they are automatically registered.

  If it is set to one, but sites do not open when you start Firefox, open your profile folder and delete sessionstore.js and if there are sessionstore.bak. For more information on how to find your profile folder, see the article of profiles - where Firefox stores your bookmarks, passwords and other user data . Who can help if the file that stores the details of the session is corrupt.

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.

• Help with image files, drop box and save the changes?

  My husband put all our photos of drop box.  They are still on our computer, but we can now also access elsewhere.  But it has somewhat modified files.

  I'm putting together, cultures and (in general) to save the changes made to some images.  But I get an error.

  Example: The image I want to change is on the side.  I right-click on the file icon and select "Rotate clockwise" in the menu dropdown. Immediately, I raise the sound "bonk" and an error message appears: "you cannot rotate this image.  The file can be used or open in another program or maybe the file is read only.  It wasn't a problem before doing things to the drop box.

  So, I wait to make sure that everything is ok.  The image is not open anywhere else.  I clicked the properties option to see if it is in read-only mode.  He said that it is not.

  When I open the image and try to use the rotation on the bottom, it will turn.  But when I close the window, I get a different error message that says "Windows Photo Viewer cannot save changes to this picture because there is a problem with the properties of the image file."   There is a link at the bottom of the message box for "Why can't save this picture?  I clicked it.  He said "the subject you are looking for is not available in this version of Windows. For additional assistance, see multiple support options. "The more support options?  Get a tech savvy friend who could help me. Nice.
  Anyone know what I need to do to make this work?
  I don't know what version of windows we have.  I'm sure that's not Vista.  It's the one after that.

  Hello

  Thank you asking in the Microsoft Community.

  1. open Microsoft paint.

  2. navigate to the image through Microsoft Paint.

  3 try to rotate and save the image.

  4 let me know if you are able to.

  Post back with the result.

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• How to capture a .gif of a spectrum analyzer file and save the file in PC

  I want to capture a .gif from a spectrum analyzer file and save the file to the PC, but I have a problem when reading data from the instrument. I don't know how to format the string has obtained from the instrument, when I use '%s' or '%t' as string format to read the data from the instrument is truncated.

  my code are, could someone tell me where I'm wrong?

  char resultsArray [5000];

  viPrintf (hSpectrumInstr, ": MMEMTORCR ' CIMAGE.") GIF "\n"); "
  viQueryf (hSpectrumInstr, ": MMEMATA? '") CIMAGE. (' GIF'\n ', '%t', resultsArray);
  printf ("%s", resultsArray);
  GetChar ();

  as you can see your code is not readable, can you post a screenshot or, as before, a Word document?

  When you use "%b" table must be of type ViInt8

• My wallpaper appears only in the extended format. I want to display a .jpeg file into the center channel mode. I click on center and save the changes, but he remains in stretch mode...

  My wallpaper appears only in the extended format.  I want to display a .jpeg file into the center channel mode.  I click on center and save the changes, but he remains in stretch mode...

  HP technical support solves the problem for me with a patch: I'm sorry that I don't remember all the steps they walked me through but the patch was SP45575. EXE.   It was working fine.  Good luck

• Illustrator CC open and save the file windows crashing several times

  I have an incredibly frustrating time with Illustrator CC. open and save the file or the other crashes immediately when I click on a folder to specify the file to save or open location. I'm running the Mavericks on my mac, and I have a feeling that is the culprit. I updated the app yesterday hoping that would solve the problem, but it only got worse.
  Work is piling on me and it is really hard not not to be able to easily save/open/export files.

  Solved the problem by disabling the spring loaded folders in the finder and finder to the block list preferences discovers only

• Call and save the reports/export to PDF using use?

  Hello

  My use is for the ".csv" files and works perfectly when read and load the files. But what would be really nice if I could somehow put the data in these files in their appropriate report templates and then export this report to a file '.pdf '.

  So, I tried to add:

  Call DataFileLoad ([Filepath], [Script]
  Call DataFileSave ([Filepath], ".") CT","CT")
  Call Report.LoadLayout ([the report path])
  Call Report.Sheets.ExportToPDF ([path to save .pdf], False)
  Call Report.Refresh
  Call Data.Root.Clear)

  «When I test the use by indexing a file manually, I get the message: Variable is undefined: «DataFileLoad»»

  So, if it is reading as a variable that suggest that it does not recognize functions unless they are specified in the sub?

  Is it possible to do what I want?

  Thank you.

  Hey Kevin,

  Your VBScript use cannot be called "red" DIAdem orders  The VBScript host that uses the use contains only basic functions VBScript more some specific commands to use, but none of the rest of orders DIAdem.

  You need to use a VBScript DIAdem script to load the data file, load the layout and save the PDF file.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to incorporate the timestamp and file name automatically select and save the file dialog?

  Hello

  I try to incorporate the name of the file that is the registration of the end user with the timestamp in the selected and save file dialog box. Can you help me?

  Thank you

  

  Hi Mike227,

  I couldn't find a way to immediately make the bat. I guess you need to mess with ActiveX to do. I found an msdn page that could help with this.

  Have you considered simply concatenating the name of the file and the time stamp with a path of the file and save the file when you create it, without inviting the user?

• take screenshot and saves the image to a PNG file

  Hello

  How do I take screenshot and save the image as a PNG file?

  Thank you

  Avivit.

  If you want a picture of façade one VI, you can use the method to obtain images of Panel (or the Tool of Capture of Code, which offers a range of screws for this).

  If you want a picture of the entire screen, you can simulate a button on the print screen, using the method of Clipboard.Get Image Application class to get a picture of the contents of the Clipboard. If you are looking for "screenshot" you should probably find a few examples already.

• Please give me solution for my computer always view your computer have persist order check and solve the problem every time when I open my computer.

  When I start my system the output display poster always your computer have Persist modula order check and solve the Problem.How to solve this problem

  Permanently?

  Hello

  
  What operating system is installed on the computer?
  
  Update video drivers and see if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Note: install the drivers on the manufacturer's Web site
  
  Hope this information helps.