iterator Dynamic not binding - no data displayed line

Similar Questions

• Error: Resolution settings are not up to date, requiring a display of 1024 x 768 or more, at the opening of Digital Photo Professional from Canon Utilities

  Title: Canon Utilities Digital Photo Professional

  My pc, I cannot open the software above.

  I get an error message saying that my resolution settings are not up to date, that requires a display of 1024 x 768 or more, but I have a HD monitor and a high-end graphics (Geoforce GT7000) card.

  Windows 7 thanks to a 6 core processor and 4 GB of memory. If anyone can help.

  Thank you very much

  Steve

  Hello

  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest to see the link below and check if the problem persists.
  Change your screen resolution
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution
   
  Method 2: If the problem persists, I suggest to update the graphics card and check if it helps.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Hope this information helps.

• My cc of dreamweaver does not link, server behaviors and data display

  My cc of dreamweaver does not link, server behaviors and data display

  Hello

  Please read this thread-

  https://forums.Adobe.com/thread/2139846

• Extensible data export line moves to the right in the worksheet

  My form has a-line dynamically expandable by the user who clicks on a button. I put a maximum of 8 lines. Some users of form just a line while others need more than one. When I export using X Arcobat forms, any form that has several lines exporting other data of the line in the column on the right very far in Excel. This makes it look at hard data with a single line in a column in the middle of the worksheet and the rest a width full page to the right. Is - it there anyway I can keep these together regardless of the number of lines is created dynamically (up to the maximum number allowed)?

  Should I hide table rows instead of creatine them dynamically? If so, how can I make a visible both with a button?

  Thank you

  The field "rowObj [*]" was just an example. You need to substitute the name of your lines. So based on your example form, the code would be:

  rowNodes = xfa.resolveNodes ("form1. #subform [0]. Action.Table1.MoreActions [*] ");"

  for (rowCount var = 0; rowCount)< rownodes.length;="" rowcount++)="">

  If this line is hidden, then show it and leave the loop

  If (rowNodes.item (number of lines) .its presence = 'hidden') {}

  rowNodes.item (number of lines) .its presence = "visible";

  break;

  }
  }

  Make sure you get this last bracket closing too, I missed it in the first block of code I posted.

  Another problem in the form, it's that you have "Repeat row for each data item" checked in the binding tab delete this for all lines. Lines are there all the time (even if they can be hidden), their presence is not driven by data, so it is not necessary.

  In addition, your script to remove line buttons required a change of:

  _MoreActions.removeInstance (this.parent.index);

  TO:

  This.parent.Presence = 'hidden ';

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• Vista opens in safe mode but can not repair or data rescue

  After switching on my Sony Vaio and see the logo Vaio pc screen displays the option of safe mode. by choosing the option of safe mode not repair defects or not save the data. Screen turns white and then thin displays at an equal distance vertical green lines. After a while the display briefly shows recangles red and turns off again. After a few minutes, a blue screen with white text will appear informing that a problem has occurred and a shutd = downwards to protect windows. Even if I press f10 launch the same aoours, suggestions how to solve this problem?

  Thank you.

  Hello

  These elements suggest corruption graphics driver or graphics hardware fault. Material most likely that she does in Mode safe.

  Because it's a laptop; If under warranty, contact the manufacturer.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• Process page not throwing no data found error when you remove the item in a table

  Hi guys,.
  
  I'm trying to run a process page just before the process of MRU in tabular form and it is throwing an error no data found . Here is my code:
  

  BEGIN
       
       for i in 1..apex_application.g_f02.count LOOP     
            
            IF apex_application.g_f01(i) is not null THEN
                 
                 UPDATE STOCK
                      SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
                 WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
                 COMMIT;
                 
            END IF;
       END LOOP;
  END;

  F01 here is the checkbox column and the if statement is the cause of the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.
  
  When I click on a checkbox, and hit the Remove button what fires off times this process and then the MRU, I get the error not found data .
  
  Would appreciate it if someone could shed some light on this. Thank you very much.
  
  Published by: taepodong on July 1, 2012 07:54

  Hello

  >
  I'm trying to run a process page just before the process of MRU in tabular form and he throws no data were found error. Here is my code:

  BEGIN
  
       for i in 1..apex_application.g_f02.count LOOP     
  
            IF apex_application.g_f01(i) is not null THEN
  
                 UPDATE STOCK
                      SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
                 WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
                 COMMIT;
  
            END IF;
       END LOOP;
  END;
  

  Here f01 is the column of the box and the if statement is causing the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.

  When I click on a checkbox and click on Remove button that triggers both this process and then MRU, I get the no found error of data.
  >

  You iterate over the f02 and seeking f01 not null. It's the misuse of the checkbox element. Please see these links. in particular the examples of process OnSubmit.
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_item.htm#CHDDCHAF
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_app.htm#AEAPI215

  Kind regards

  PS: That's what you need to understand
  >
  Note that the boxes displayed by using APEX_ITEM. CHECK box will only contain values in the APEX_APPLICATION tables for those lines that are checked. Unlike other elements (TEXT, TEXTAREA, and DATE_POPUP) that can contain an entry in the corresponding table of APEX_APPLICATION for all submitted ranks, a checkbox will be an entry in the APEX_APPLICATION table if this option is selected.
  >

  Published by: Dominique July 2, 2012 09:44

• Instances not backed up data

  I am currently using Adobe LiveCycle Designer 8.0 to create dynamic PDF files.  I save the format "Adobe 8 dynamic XML Form" , I set myself "Changes scripts Preserver to form when recording" to "Automatic" and the binding on all my forms/textfields is defined to "Normal."

  When I open my PDF in Acrobat Acrobat 8 Professional, and I use my buttons by script to add new instances of TableRow/forms/etc I conclude that the status of the forms instantiated is not preserved, and all the fields with completed inside of them are empty when I save the form and reopen it.  Filled TextFields and boxes marked forms of proceeding not maintain their data, but everything I entered into the forms created using _MyForm.addInstance (true) fail to save their data when the PDF file is saved.

  Can someone tell me please?  Please be aware that versions of the software that I use are set in stone, and not something that can be improved as a solution to the problem.  Thanks for any help you can give!

  It looks like the opposite of this thread here:

  http://answers.acrobatusers.com/JS-delete-rows-saved-q105709.aspx

  Allan, there can work with a newer version of Acrobat that keeps the changes. However, allan may have forgotten to put 'Keep changes to scripts to form when registering'.

  Also consider this case: http://forums.adobe.com/thread/868373

  meem23 worked with a version of LiveCycle with no option 'Keep changes to scripts to form when registering'.

  However, your case is even more mysterious, because Adobe LiveCycle Designer 8 and Acrobat Professional 8 should have happened together meaning that LiveCycle is part of Acrobat Professional at the time of this release. And you can set the option 'Keep changes to the scripts to form when registering'.

  If you find no solution, you can try this workaround: set the option 'Keep changes to the scripts to form when recording' to 'Manually' and preSave or formReady event script. Thus, for example, set instanceManager count, max, min before leaving the form. Put the data in dynamic fields in hidden static fields. Recharge them when the reopening of the form.

• PS5 will not change the date registration

  PS5 will not change the date when I save a document I'm working. I tried save as and save and it keeps the date of the photo, in this case, a scanned image that swept the 09/07/11 @ 15:49. I saved many iterations of the PhotoShop photo and the date remains the same. I tried it with other photos and even once, it retains the original date. If I open in AI5 and save it, he recorded with the current date. Am I missing something here?

  I use the current build 12.0.4 x 64, Win7 Home Premium

  PAM

  Chances are Windows found the folder a folder "photo", and explore does NOT show you the date of the modified file.

  Personally, I hate having "automatically" selected multiple views for me, and I tweaked my copy of Windows so that it always shows me the "General items" view all records, be they full of photos or music or something else.

  You can check this by clicking on the name of the folder in the Navigation of Explorer (left), and then selecting Properties.  On the Customize tab, see what it says in the "optimize this folder for:"selector. ".  If it is different from the general items, change it to general Articles.  This gets you a good "Date Modified" column, indicating the date of the file.

  If you want to make a permanent change to Windows 7 (so all new folders are displayed in the form of General items in the folders, and automatic display selection is disabled), a value can be added to (or changed in) the registry as follows:

  Registry key: [HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\Shell\Bags\AllFolders\Shell]

  Name of the Data Type value

  FolderType REG_SZ NotSpecified

  -Christmas

• JavaScript question - do not click on dates in a calendar

  We try on online tennis court booking site. When I click the calendar icon to select a date in the calendar, I can click on the date, but he does not at that date.

  Other browsers such as Chrome and Internet Explorer work fine. It just goes straight to the date I click.

  <"rel = 'nofollow' > http://demo3.onlinecourtreservations.com/Reservations.asp > demo version"

  <"rel = 'nofollow' > http://mum.onlinecourtreservations.com/Reservations.asp > our trial version."

  Here's what I sent to the developer and his answer is below.

  My Question: When you use the calendar for date selection tool, I noticed that it will not to the date on the calendar that I click. I can navigate using the arrows of day view and the view arrows week next to the icon of calendar very well.

  DEVELOPER RESPONSE: The calendar tool is based on javascript, so the security of your browser must allow scripts. To do this, the simplest method is to add your site to the "trusted sites" on your browser.

  The steps I've tried:
  1. the reset of the functionality of Firefox
  2. clear all history
  3. start in Safe Mode
  4. check to make sure that javaScript is enabled and it is.

  I wonder why this works fine in Chrome and Internet Explorer and not Firefox.

  Could someone help me solve the problem?

  Thank you.

  If you use this script, you can change it?

  The pop-up tries to submit a form hidden in the main window using a standard, old SEO method. You can correct the script in the pop-up window, or you can create a reference in the main window.

  Method #1:

  Change the code in the popup

  reservation_window.frmCalendar.submit();
  

  for this

  reservation_window.document.forms['frmCalendar'].submit();
  

  Method #2:

  In the main window, create a global script variable that creates the missing reference:

  window.frmCalendar = document.forms['frmCalendar'];
  

  Once solve you this problem, there is a new number. Web site empty, and when you view the source, you see that there is a problem with one of the hidden form parameters.

  Microsoft VBScript runtime error '800a000d'
  Type mismatch: 'CInt'
  /demo/common/reservationssheet/script.asp, line 25
  

  Since it is on the server, I don't know what goes wrong, but the script apparently don't deal well with a time value start missing. For what it's worth, I get the same error in IE8.

• I opened firefox and do not have icons or the line to enter url

  I opened firefox tonight... I have no line URL icons (refreshment, and so on) to type in, no bar of google to search in...

  Don't see the menu bar (file, publishing, display, history...) (Help)? Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.
  See the other bars under view > toolbars. Click on one of them will place a check mark (display) or remove the check mark (not shown).
  To display the status bar, display, and then click status bar to place a control mark (display) or remove the check mark (not shown).

  • If items are missing then see if you can find them in the view > toolbars > customize window.
  • If you see the item in the window customize then bring her back in the window, customize the Navigation toolbar.
  • If you do not see this item then click Restore default set in the view > toolbars > customize window.

• QUESTION: SE 2012 data display returns to the time graph each time

  Hello

  I have SigExp 2012.

  If I try to add a data view and make a pledge of graphic style, thermometer, etc., as soon as I have the right up until it clicks, add my TC chain, the data view returns immediately to a graph time.

  In addition, even if I use the graph of time, once I added the signal, it only let me see the string in a table, a chart of time or a waveform graph.  Those are the only choices.

  If I use a graph of time or a band of waveform graph, it does not read the signal correctly, but I can not configure the data view, the way I want it.

  Is this a bug or I do something wrong?

  Thank you!

  This occurs when you try to change the display of a signal in its raw format "waveform".
  You must convert your signals in scalar format. To do this simply add an amplitude and levels step (under: analysis > measures Time-Domain). Drag this DC signal newly converted to a new chart and right click on the graph to change the display.

  Honestly, I'm not sure why raw waveform signals are inherently limiting viewing functionality, but in such cases, it is.

  You can also; According to the devices on which you use and the order in which you add to your DAQmx Acquire, some default signals step to scalar signals without having to convert.

  See the attached screenshot and you'll see how the icons are different between the waveforms and scalar signals.

  Hope that helps

• Create a button to erase/reset the data displayed in the graph

  Hello

  I'm new here and to work with labview. I searched the Forum but have not found an answer that would help me (or at least I think I thank)

  I'm working on a project to acquire process an ECG signal with an acquisition of data. In the front panel, I am trying to display 2 graphics, part of the real-time data display and the other showing all the data acquired up to now. I wanted to add a button to this second graph that, when the user wanted, deleted the data shown in the graph, but immediately continued to display the data.

  (trying to make me more clear)

  ' display all the data acquired--> X--> cleans graphic display--> press the button display all acquired data.

  If someone could help, I would be very grateful!

  Thank you very much

  FM

  Hi fred,.

  Open the finder example in LabVIEW and locate the example of 'how clear diagrams & graphics '.

  Pretty easy, don't you think?

• Can a dynamic action of type 'alert' display a value of field without javascript?

  Hello

  can a dynamic action of type 'alert' display a value of field without javascript ( alert ( $x (P '200_OP').value)); ?

  What should I write in the 'text' section to display in the alert, the value of P200_OP for example?

  Gianpaolo cordially

  Hi gianpagi,

  gianpagi wrote:

  I know that with "run JavaScript Code" works. My question is about action as 'alert '.

  Dynamic action "Alert" is expected to this only the string to display in the alert. May not be able to access the current value set in a page element.

  Therefore, "Run the Code JavaScript" only works in this case where your can integrate the current values of the DOM html elements

  If you notice that da 'Alert' request 'Text' and 'Execute JavaScript Code' DA 'Code' request to be executed.

  Kind regards

  Kiran