ITunes 12.3 on MacBook Pro can send music on a paired bluetooth device?

Similar Questions

• ITunes on my old MacBook Pro does not recognize my new Iphone

  ITunes on my old MacBook Pro does not recognize my new Iphone... but apparently I can't download the new version of Itunes to this model of MacBook Pro? (according to the message that I get)... So I can't transfer my photos / apps / data, etc., for my new phone... Does anyone have advice?

  Thank you

  It is not so much the Macbook Pro model as what operating system your help, for example, if you're running Lion and trying to download Itunes for El Captian. Impossible to run your operating system which. Updates for your system come from apple. Ether through a software update or the Apple app store. Generally, you will receive a notification if an update is available. What operating system you're running and what Iphone model? IPhone 6plus has for example need OS 10.7.5 or newer.

• Router WRT160N - Macbook Pro can connect but not Internet

  For some reason any my macbook pro can no longer access the internet wirelessly through my WRT160N. It works very well through a cable connected. I can even connect to the wireless router - full signal and get only one ip address, but it does not connect to the internet - via my browser - I get "cannot find server" and "internet connection doesn't seem to work." Or other applications that use the internet don't work.

  My mac has always been able to connect to other wireless routers. My router is the latest firmware.

  I tried a lot of the things I found in various forums - redo manual settings of router configuration on the router, security (WEP, WPA, unsecured) settings and one suggesting same zap the PRAM. Any Suggestions?

  If your MAC can connect to other networks / Wireless Router, it must do something with your wireless network...

  In this case a simple reset can help you solve your problem, you need to reset your router to default and then re - configure the router from scratch...

  To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  Adjust the settings on your router wireless-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

  If you have a second see computer/laptop wireless if it connects to your wireless network of...

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• We can send SMS messages to a BB device programmatically?

  Can someone tell can send us SMS to a BB device programmatically? If Yes, then how it is possible?

  MessageListener can be used to read the SMS message and make a small operation on the device?

  Not the answer to your question. But I think it will give more of your understanding of the problem.

  There is a way to send sms via applications through what we call servers SMS-gate.

  Usually the server SMS-door installed on the site of a wireless provider.

  And if you want to use this server, you must sign the contract with your provider of wireless and get access to this server. You will get technical documentation - addresses, protocols, URL, etc..

• Etrecheck shimming macbook pro / can't stop

  Here is a copy of my report to etrecheck.  MacBook Pro info in the report. Have you tried a second Etrecheck and he's basically freezing my computer where I have to stop and restart manually. Thanks for any help.

  EtreCheck version: 2.6.4 (224)

  Report generated on 27/11/15, 01:57

  Duration 02:55

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Pro (13-inch, mid-2012)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 739 - SN = W02284XG6D3LC

  Video information: (Does that mean?)

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: (Does that mean?)

  OS X El Capitan 10.11.1 (B 15, 42) - since startup time: less than an hour

  Disc information: (Does that mean?)

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 498,88 (Go 387,35 free)

  Storage of carrots: disk0s2 499.25 GB Online

  HL-DT-ST DVD - RW GS31N)

  USB information: (Does that mean?)

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [operation] com.fitbit.galileod.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  User launch officers: (Does that mean?)

  [loading]   Fozhand.AppRemoval.plist [click to support]

  [loading]   Fozhand.download.plist [click to support]

  [loading]   Fozhand.ltvbit.plist [click to support]

  [performance]   Fozhand.Update.plist [click to support]

  [loading]   Manroling.Update.plist [click to support]

  [loading]   Otwexplain.download.plist [click to support]

  [loading]   Otwexplain.ltvbit.plist [click to support]

  [performance]   Otwexplain.Update.plist [click to support]

  [loading]   Perfetnight.AppRemoval.plist [click to support]

  [loading]   Perfetnight.download.plist [click to support]

  [loading]   Perfetnight.ltvbit.plist [click to support]

  [loading]   Perfetnight.Update.plist [click to support]

  [loading]   Portsayd.AppRemoval.plist [click to support]

  [loading]   Portsayd.download.plist [click to support]

  [loading]   Portsayd.ltvbit.plist [click to support]

  [performance]   Portsayd.Update.plist [click to support]

  [loading]   Swissfist.AppRemoval.plist [click to support]

  [loading]   Swissfist.download.plist [click to support]

  [loading]   Swissfist.ltvbit.plist [click to support]

  [loading]   Swissfist.Update.plist [click to support]

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [operation] com.amazon.music.plist [click to support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [click to support]

  [loading] com.extensions.updater69337.agent.plist [click to support]

  [operation] com.spotify.webhelper.plist [click to support]

  Items in user login: (Does that mean?)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Canon IJ Network Scanner selector application hidden EX (/ Applications/Canon Utilities/IJ Network Scanner selector EX / Canon IJ Network Scanner selector EX.app)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

  The messages application (/ Applications/Messages.app)

  Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)

  Hidden Spotify Application (/ Applications/Spotify.app)

  Other applications: (Does that mean?)

  [operation] com.adobe.PDApp.AAMUpdatesNotifier.15392.1954061E-E630-4023-AC9B-3331CB5EAAFE

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000002.EtreCheck

  [ongoing] com.fitbit.GalileoMenubar.91552

  [ongoing] com.getdropbox.dropbox.48672

  [ongoing] com.HP.devicemonitor

  [ongoing] com.spotify.client.65312

  [ongoing] jp.co.canon.ij.CNSSelectorAgent.92192

  Plug-ins Internet: (Does that mean?)

  FlashPlayer - 10.6: Version: 19.0.0.245 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

  Flash Player: Version: 19.0.0.245 - 10.6 SDK [click for support]

  EPPEX plugin: Version: 10.0 [click for support]

  Default browser: Version: 601 - SDK 10.11

  RL Secure Layer plugin: Version: Unknown - SDK 10.5 [click for support]

  SharePointBrowserPlugin: Version: 14.5.8 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.30514.0 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 7.0

  User Plug-ins internet: (Does that mean?)

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  UploadManager: Version: Unknown - SDK 10.5 [click for support]

  ContentManager: Version: Unknown - SDK 10.5 [click for support]

  RocketEngine: Version: Unknown - SDK 10.5 [click for support]

  Safari extensions: (Does that mean?)

  HoverSee

  3rd party preference panes: (Does that mean?)

  Flash Player [click for support]

  Time Machine: (Does that mean?)

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 498,88 GB disc used: 111,53 GB

  Destinations:

  Time Machine [Local] backups

  Total size: 499,76 GB

  Total number of backups: 15

  An older backup: 24/08/12, 11:41

  Last backup: 01/11/15 16:02

  Size of backup drive: adequate

  Backup size GB 499,76 > (disc 111,53 GB X 3)

  Top of page process CPU: (Does that mean?)

  40% mdworker (16)

  11% com.apple.iCloudHelper

  4% WindowServer

  3% kernel_task

  2% spotify Helper (2)

  Top of page process of memory: (Does that mean?)

  Kernel_task 559 MB

  270 MB mdworker (16)

  246 MB Spotify Helper (2)

  Com.apple.WebKit.WebContent 238 MB

  111 MB messages

  Virtual memory information: (Does that mean?)

  104 MB free RAM

  3.90 used GB RAM (993 MB cache)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  27 November 2015, 01:34:11 /Library/Logs/DiagnosticReports/galileod_2015-11-27-013411_[redacted].crash

  27 November 2015, 01:19:53 /Library/Logs/DiagnosticReports/galileod_2015-11-27-011953_[redacted].crash

  27 November 2015, 01:08:24 Self test - passed

  26 November 2015, 01:34:26 /Library/Logs/DiagnosticReports/galileod_2015-11-26-013426_[redacted].crash

  26 November 2015, 01:15:21 /Library/Logs/DiagnosticReports/galileod_2015-11-26-011521_[redacted].crash

  November 25, 2015, 20:25:13 /Library/Logs/DiagnosticReports/galileod_2015-11-25-202513_[redacted].crash

  November 25, 2015, 19:50:37 /Library/Logs/DiagnosticReports/galileod_2015-11-25-195037_[redacted].crash

  November 25, 2015, 16:41:09 /Library/Logs/DiagnosticReports/galileod_2015-11-25-164109_[redacted].crash

  November 25, 2015, 14:05:35 /Library/Logs/DiagnosticReports/galileod_2015-11-25-140535_[redacted].crash

  November 25, 2015, 12:08:56 ~/Library/Logs/DiagnosticReports/AppAS_2015-11-25-120856_[redacted].crash

  November 25, 2015, 12:08:56 ~/Library/Logs/DiagnosticReports/AppRP_2015-11-25-120856_[redacted].crash

  November 25, 2015, 01:58:18 ~/Library/Logs/DiagnosticReports/AppRP_2015-11-25-015818_[redacted].crash

  November 25, 2015, 01:58:18 ~/Library/Logs/DiagnosticReports/AppAS_2015-11-25-015818_[redacted].crash

  November 24, 2015, 14:08:28 ~/Library/Logs/DiagnosticReports/AppRP_2015-11-24-140828_[redacted].crash

  November 24, 2015, 14:08:28 ~/Library/Logs/DiagnosticReports/AppAS_2015-11-24-140828_[redacted].crash

  November 24, 2015, 02:01:06 ~/Library/Logs/DiagnosticReports/Adobe Photoshop Elements Editor_2015-11-24-020106_ [redacted] .crash

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you have already a current backup backup all data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

  [Process started]

          Part 1 of 4 done at … sec        …        Part 4 of 4 done at … sec

          The test results are on the Clipboard.

          Please close this window.

  [Process completed]

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final "Process complete" message. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see, but rather to see a mass of gibberish, you don't expect the "Completed" message is displayed in the Terminal window. Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• sync iPhone system 10 iTunes 11.4 on MacBook Pro

  I just updated my iPhone OS 10 5 and now I can sync is no longer the phone with my laptop MacBook Pro running iTunes on system 10.6.8 11.4

  When connected, the phone will ask you to 'trust' of the computer. I select "trust", but a window on the computer with the message: "iTunes could not connect to the iPhone 'Janet Katz' because an invalid response was received from the device."

  Is there a workaround or setting solution that needs to be changed?

  Janet Katz

  Hi, Janet...

  The problem is that your Mac works an obsolete OS X 10.6.8. iTunes for Mac minimum requirement is v10.9.5 or later which is indicated here > http://www.apple.com/itunes/download/

  The alternative is to see if your Mac can upgrade to Mac OS Sierra > macOS - how updated - Apple

  With Sierra installed you can run the latest version of iTunes 12.5.1 and should be able to sync your iPhone.

• Cannot connect to iTunes on the new macbook pro

  I have a new Macbook pro and am unable to connect to iTunes?

  Understanding iTunes is an application that runs on your computer. You can't "sign in."  You can connect to the iTunes Store using iTunes. -What are you trying to do? If so, why it isn't working? Which exact error message do you see or what happens?

• A used macbook pro can be saved?

  I have a used macbook pro and do not know to whom it belonged originally. Can she be saved?

  Try entering your serial number here. https://checkcoverage.Apple.com

  Kim

• I did this, copied my iTunes from iMac to Macbook Pro folder, and my playlists are not displayed on my Macbook. My iMac has been reformatted since... Is it possible to get my playlists?

  I did this, copied my iTunes folder of iMac to Macbook Pro according to the tutorial below, and my playlists are not displayed on my Macbook. My iMac has been reformatted since... It was my mistake, fitness before seeing that my playlists were not on my Macbook. Is it possible to get my playlists?

  https://support.Apple.com/en-us/HT204318

  Probably put you the folder in the normal position inside the music.  Launch iTunes while holding down the option/alt key and navigate to the iTunes Library.itl file in the folder that you moved.

• How to turn iTunes Bar Menu on MacBook Pro

  Hello world. I recently bought a MB Pro after having been a Windows user for a long time. For the life of me, I can't enact Menu in the built-in iTunes. No problem with the PC I like there is a mini icon in the corner of LH from the dialog box.

  Secondly, but not in the area of the right question (can you give me link please?), how I authorize my Mac to accept my iTunes library that I'm running on 2 x 1 x iPhone, iPads and a PC. 4 the maximum I'm on an account? If I'm off to allow all and carefully pick which devices to run, can I recover my iCloud backups? Would I be able to get the iTunes library on my Mac? 3 devices are associated with my Apple ID, 2 x PC & my iPad. My wife also has his own account which is not often used, but I really want to manage all devices under my account. I hope that all makes sense. Thanks for any help.

  iTunes 12: View menu bar - https://discussions.apple.com/thread/6784463

  iTunes Store: allow or remove approval from your Mac or PC - http://support.apple.com/kb/HT1420 - and another useful ticket: https://discussions.apple.com/message/17828050#17828050

  Note the distinction between the authorization of the computer and device association - https://discussions.apple.com/thread/7106883

  A better way to get your library on your Mac:

  Moving a library: quick response if you use preferences by default iTunes settings: copy the folder integer iTunes (and to ensure that all of its subfolders and files) intact at the other disk, hold down the option/ALT key to start iTunes and on request to select a library select iTunes Library.itl file in the copied folder.

  When it's to a new computer put the iTunes folder copied to the default location of Macintosh HD > users > * user name * > music (or home > music) so you don't even have to start with the down option, iTunes will automatically look for what it y.  (Make sure that it is no anything already in the iTunes folder it that you want to keep because you will replace it with the one you are moving).  Don't forget to authorize computer in iTunes to your Apple ID if you use it to synchronize with Apple devices or play multimedia DRM protected (e.g., movies).

  Some elements used in iTunes related activities are not stored in the iTunes library folder, but in special folders.  If you move a library to another computer, you can copy these too:

  -Music Apple file cache: http://dougscripts.com/itunes/2015/09/new-flush-apple-music-cache-files/

  -device iOS, various preferences files backups: https://discussions.apple.com/thread/3285925

  Windows users see tip to: https://discussions.apple.com/message/18879381#18879381

  You can move everything from your Windows PC to your Mac in a single movement, including your iTunes library: on Windows Migration Assistant - http://support.apple.com/kb/ht4796 - learn how to use Windows Migration Assistant to migrate files from a Windows PC on a Mac.  Extra tip by Ludovic 05/2014 - https://discussions.apple.com/message/28178940#2817894

• MacBook Pro can't see not camera in USB, El Capitan.

  My Macbook Pro doesn't detect USB camera, I see using the information system.  Other items in the USB ports are detected correctly.  It worked with 10.6.x (I think it was certainly pre - 10.6.8 10.6.4,), then I tried and failed to install 10.6.8 and stopped computer detection camera.)  Then I could to 10.6.8 then 10.11.1 upgrade, but it still doesn't detect camera.  Any ideas?  Thank you.

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.1

• MacBook Pro can't see hotspot USB iPhone

  I regularly use the iPhone to create a WiFi personal hotspot to feed my MacBook Pro. It works fine over WiFi but not via the USB port. Says 'the cable is unplugged,' which is not true. I tried different cables to eliminate the thread as the problem.

  The Mac does not generally consider USB to be a network protocol.

  You have a reason why you think it should work?

• Is my MacBook Pro 15 "end 2013 compatible with Thunderbolt 3 devices (if you are using an adapter)

  I have a MacBook Pro 15 "end of 2013, 16 GB, 1 TB SSD, 2.3 GHz i7 running OS X 10.11.4." My SSD is maxed out so I plan to buy a box 2 Berry drive Thunderbolt and secure it with a 1 TB SSD.

  I know Thunderbolt enclosure 2 still available, but lightning 3 cases are starting to hit the market. I wonder if a Thunderbolt 3 box will be compatible. Because I'll probably replace it the MacBook Pro 12-18 months and I assume - rightly or wrongly - that Apple will adopt 3 bolt of lightning on the MacBook Pro, Mac Pro and iMac during this period, I would prefer Thunderbolt 3 for scalability.

  I am aware that the cables are physically different, and 3 bolt of Lightning has adopted the USB - C standard. My question is: if I buy the cable or a suitable adapter, I'll be able to use a box Thunderbolt 3? (I know there will be no performance difference; however, it is scalability).

  Thunderbolt 3 is backward compatible with earlier versions of Thunderbolt.

• BlackBerry smartphones can not find the motorola HS815 bluetooth device

  Hi, I recently bought blackberry curve 8310. I tried to use my Motorola HS 815 bluetooth headset, but my blackberry is not able to find the bluetooth device.

  I couldn't find anything on the forum for the same thing.

  I really appriciate if you can give any suggestions.

  Thanks in advance,

  I got it working now! It's all my stupidity that I forgot that I didn't start my headset in pairing mode correctly. Finally, I read the manual on the motorola site and its market not now!

  http://www.Motorola.com/hellomoto/master%20Lists/product%20Manuals/static%20Files/us-en/HS815%20Blue...

  Thank you