iTunes could not connect to Nike +.

Synchronize my Nike + works on site Nike + worked very well for over a year.

From two weeks, when I connect my 7th gen iPod Nano on my 10 Windows PC I get the following error message:

«iTunes has not to connect to Nike +.»  You are not authorized to access the requested resource. »

And the synchronization stops until I hit "OK".

I can connect on the site Nike + very well.

I can see my most recent data running in iTunes.

When I fooled around turning on and off "Automatically send date of Nike" and logging on to the Web site of the week last I got it updated a bit shorter.  I have not been able to recreate that.

I did the reset obvious from my PC and Nano.

I enabled the use of the disc on the Nano and all under the record of the coach seemed reasonable, but I don't know what to expect here.

Any other suggestions?

Also, is it possible to synchronize the walks?

Tags: iTunes

Similar Questions

  • iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

    So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

    A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

    At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

    Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  • iTunes could not connect to the iPhone, because an invalid response was received from the device.

    Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

    You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

    At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

    Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

    If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

  • -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

    iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

    You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

    At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

    Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

    If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

  • Error iTunes - iTunes could not connect to the store purchases - if you have any firewall software, make sure it has been set to allow communication on port 443.

    My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443.

    I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem.

    Was there an update and now it's a bug? Help!

    Thank you!

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • iTunes could not connect to the iTunes store

    OP: iphone 4'

    try to connect to the iphone 4 to itunes, but it happens that itunes could not connect to the itunes store. the network connection timed out. Make sure that your network settings are correct and your network connection is active. then try again. but I can connect via Solution Explorer, but cannot update the phone

    To connect the iPhone to iTunes problems, contact Apple for support with their software/hardware:

    http://www.Apple.com/support/iTunes/

    See you soon.

    Mick Murphy - Microsoft partner

  • error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone please tell me how to proceed? __

    error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone tell me please how to do this?

    Hi vivasiousv,

    1 when was the last time it was working fine?

    2. did you of recent changes on the computer?

    See the links in the Apple Web site and try the steps mentioned below.

    http://discussions.Apple.com/message.jspa?MessageID=6096760

    http://discussions.Apple.com/message.jspa?MessageID=8436848

    For additional support post your query in the Apple discussion.

    http://discussions.Apple.com/category.jspa?categoryID=150

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • 12.3.3.17 iTunes could not connect to devices AirPlay (Airport Express)

    After the update to iTunes 12.3.3.17 I can connect is more to Apple Airport Express.

    I updated iTunes to 12.3.3.17 on both computers:

    1. Windows 7 64-bit SP1 / iTunes 12.3.3.17 64-bit

    2 Windows 10 64 - bit / iTunes 12.3.3.17 64-bit

    On the Windows 10 computer, iTunes can connect and play all three Airport Express.  An iPod Touch can also flow to each of them.

    After the upgrade to 12.3.3.17 on the Windows 7 SP1 computer, iTunes can see all three Airport Express and they are not greyed out.  But when an any of them are selected in the dialog of speaker, iTunes tries to connect and after 30 seconds results in the error "an error occurred when connecting to the device AirPlay"xxx". The network connection timed out' and the selection is then grayed out.

    The network card on this PC, the router, and all three Airport Express everything seems to work properly as I can deliver on all of them using software third 'wing' with other applications as the source.  I can also control iTunes on the PC wirelessly from iPod with the Remote app.

    I just can no longer spread to one of the Express from the airport directly from iTunes after the 12.3.3.17 update.

    Any thoughts?

    Well, problem solved (mostly) by a lot of trial and error and it turns out be a problem of WF on the UDP ports must be open for Hello.  It was a bit of a surprise, because the Airfoil program (third party utility AirPlay) uses also Hello (that works).

    The Windows Firewall has a rule entry of inbound traffic for Hello to port 5353 UDP.  Changing the rule to allow all Ports (UDP) does the job.  So I studied what UDP ports were actually necessary for the Hello and Airplay and amended the rule again, this time replacing all Ports with these specific UDP port numbers: 554 (1900), 5289 5298, 5350, 5351, 5353, 49159, 49163

    However, that did not yet work so I ended up coming back to the all Ports configuration.

    If someone uses the firewall native Windows (preferably Windows 7, but probably the same for 8 and 10), I would be interested to know what UDP ports allows your Windows Hello firewall.

    Control Panel > Windows Firewall > advanced settings > inbound rules > Hello

    I had certainly not changed firewall settings before this update to iTunes (and AirPlay worked just hours before) and know not why the update seems to have changed the Windows Firewall settings, but that helps to explain why the Windows 10 computer worked fine after the update, because she was using the McAfee Security Suite firewall.

    Thank you!

  • iTunes could not connect to this iPhone because an invalid response was received from the device

    My iPhone6 works on my Mac at work, but not on my Mac at home? He was going well until the day or there are 2 - I just upgraded my phone to 10.0.2 and now can't connect to iTunes or iPhoto.

    Can anyone help?

    Thank you!

    Describe connect? It sees, but not copy, can he not see it.

    What is the operating system to work? What is the OS at home?

  • App Store said that it could not connect to itunes. Help

    I have an Iphone 5s. After that I updated the software (10 IOS), when I try to download or update applications, it says could not connect to the iTunes store. I tried to close the session and log in. He said the same error.

    Please help me. I don't know what to do

    I have the same problem with my I pad. Cannot connect to iTunes when I try to download a book

  • I've recently updated my Apple ID (including the change of password). However, could not connect to iTunes to update the applications or make purchases. Any help?

    I've recently updated my Apple ID (including the change of password). However, could not connect to the iTunes Store to update the applications or make purchases. Any help?

    Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

    Then sign out of the iTunes Store and reconnect.

  • App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

    But Google chrome works well.

    So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

    (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

  • "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

    So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

    So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

    As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

    Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • Y at - it a setting or a config that keeps me from typing the actual numeric address of a Web site, after which he said "could not connect to the server?

    From time to time that I step a numeric address for a Web site in the address bar, but when I do, Firefox just freezes for a while, then says could not connect to the server. It's fishy. (hook.)

    What is the format that you use for the IP address?

    If I type 98.124.44.207 in the address bar, need me to google. It works for you?

  • Could Not Connect To Apple TV

    As the title says... "Could not connect to Apple TV"

    Its last 4th Gen and I just all of a sudden today get this message. No changes made to do anything. AirPlay works very well on my 3rd Gen on the floor. Switch to 'Living Room' and cannot connect. Summer works well for months and months.

    Tried to restart everything. Everything is up-to-date. Disabled firewall... (don't see why this is a diff when it works fine) Nothing happens... Same message...

    I'll have to do a reset here? Or is it something else.

    Any help appreciated thanks a lot,

    Mac.

    Try these steps, check to see if things work after each step if necessary, before you try the next.

    1. Check AirPlay is on the Apple TV (turn market if it already is)
    2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
    3. Restart the Apple TV (settings > general > restart).
    4. Restart the Apple TV by removing ALL cables for 30 seconds.
    5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
    6. Restart your mobile device.

    If you're still having problems, the following article can help you.

    Troubleshooting AirPlay

    Troubleshooting connections and Wi - Fi networks

    Recommended Wi - Fi settings

    WiFi Diagnostic Software (for Mac users)

    You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

    When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

Maybe you are looking for

  • How to fix his jerky in PA3455U Toshiba bluetooth wireless adapter?

    I have Toshiba bluetooth wireless adapter PA3455U with Toshiba bluetooth stack v 8.0.0.12Tsoftware on Windows 7. When I use it in the A2DP profile I get his jerky.Tell me please how to fix this?

  • Envy 14-J009TX: low Panel disassembly Envy 14

    I bought this laptop 2 months ago, and since I'm working in a dusty environment, this laptop starts to clog with dust on the fans. I want to open it so that I can clean the fans and remove the accumulation of dust. After the disassembly guide and by

  • My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.

    My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.When I delete a file, none of these files are saved in the Recycle Bin. tried to restore desktop icons. no use.

  • with WUSB600N wireless connection management

    I just installed a (renovated) WUSB600n on my netbook. The to-do bar displays 3 wireless connections, one is managed by the Wireless Linksys network monitor, and the other 2 are managed by Windows XP, each of these 2 shows a connection to a wireless

  • Inspiron N7010 can not disable the Touchpad

    I have an Inspiron N7010, Windows 764 bit, it was determined that the hard drive was once again, therefore, dell sent me a new hard drive, I made an image of the system on an external hard drive, then installed the new hard drive without any problem.