ITunes files is not found

Similar Questions

• My library Itunes said that "the original file is not found.

  My library Itunes said that "the original file is not found. When I go to find the song on my computer, I have only 2/7 songs for this album. It's like the majority of the music on my laptop wiped himself? Someone help?

  Hello Rebecca,

  Problems of location of all the other files on your computer?
  You are able to locate your music files in your music library?
  http://Windows.Microsoft.com/en-us/Windows7/products/features/libraries

• my ipod not synce with my pc, says the requested file is not found

  I download music from itunes, couldn't remember my password had change. So I did then downloaded music, when I tried to sync it locked up my computer and would never sync. I can listen to music on my pc, but cannot get it on the ipod.

  Hi MarkWebb,

  You can follow the steps in these links and check if the problem persists:

  iPod cannot be synced.  Required folder cannot be found.

  "Requested file is not found."

  Hope the helps of information.
  Please post back and we do know.

• Satellite Pro M10 Hibernate - error message "the file is not found.

  I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.

  I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice

  When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
  Of course, this file is missing in your installation.
  You can activate and disable hibernation in the system control-> power options.
  Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
  The size of the hibernation file is different from your main memory size.

• Why the beats start file is not found on my TouchSmart 320-1050?

  I have a 320-1050 Touchsmart from HP with Windows 7 64 bit operating system.  When I try to open the software of beats, I get an error message saying that the boot file is not found.  I have not made any changes to my computer and that you have not added new programs.

  Hello Shirley,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56045.exe

  One time finished, open windows control panel, open programs and features, locate the Audio IDT entry, right click and select uninstall.

  When this has completed, restart the computer.

  Let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• error-61499 to Compileinstructions.txt. File was not found.

  Description of the problem:

  I have a cRIO application that used a module NI 9401 DI, that I needed to change to use a cRIO or NOR-9411.  I added the module to 9104 chassis, modified the project to include the correct, deleted and added HW FPGA DIO VI in the application and went to compile...

  When I did, I got:

  error-61499 to Compileinstructions.txt. File was not found. Check

  Support SW installation target.

  Is that what sounds like my install Labview is watered upwards and my Xilinx compiler is missing or broken?  Let me know.  I am against a date limit to change this code.  I tried to re - install modules FPGA and re - compile, but when I try to open the FPGA VI to recompile LV hangs too.

  Things are degenerating fast here... I was really not looking forward to blowinga DAY reloading system ALL THE LV... since I KNOW what technical support is to tell me... I've seen that movie too many times.

  Any ideas are appreciated.

  JPR

  It clearly looks like a Setup error.  Make sure that you fix LabVIEW, LabVIEW FPGA, OR RIO, and other features that seem to be related.

• Unable to launch programs error: could not open rtl120.bpl file is not found, try to reinstall the program

  Original title: difficulties to open programs

  I keep trying to open different programs but get a message that says "could not open rtl120.bpl file is not found, try reinstalling the program.»  My problem is that some of these programs came with my package on the computer and if I uninstall it then I have to pay to re install a new program.  How can I solve this problem?

  Hi JenniferAS,

  1. is the issue limited with a particular program?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  It is a file associated with a program called Tune Up Utilities 2010.

  Tune up Utilities is a suite of utility software for Microsoft Windows designed to help manage, maintain, optimize, configure and troubleshoot a computer system.

  Method 1: Uninstall and reinstall Tune - Up Utilities 2010 and see if that helps.

  Step 1: Uninstall tune-up Utilities 2010.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 2: Re-install tune-up Utilities 2010.

  Download tune-up from here:

  http://download.tune-up.com/TUU2010/TU2010TrialEN-GB.exe

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• I get the message that running ' Ckdsk/f' the file is not found. I can't defragment drive c.

  I can't dfragment c drive. I get the message run Ckdsk/f. The file is not found.

  the command is CHKDSK /F.

  However, it is best to run this instead: CHKDSK /R

  It is unclear if you do not run the check disk drive correctly or if the check disk command / file is affected by the volatile file system.

  my suggestion is to acquire a xp boot cd and boot the recovery console.

  then when you get to the disk prompt run the command >: CHKDSK /R

  then type exit, remove the cd and boot into windows.

• McAfee file is not found when I try to start the services stopped in the Computer Management Console.

  McAfee services ceased.  When I go to Services and try to start I get an error 2, "the file is not found."  I look in the programs and the file seems to be there.  I believe that the services were stopped due to Game Booster (which has stopped some services when you are playing a game).  I had turned on Game Booster, then I shut down the system without return - turn off Game Booster I believe that some of my services won.

  Uninstall mcafee in any case, his despair. Or uninstall it then reinstall it

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

  I recently bought Age of Empires 3 and tried to install it.  I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed.  I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode.  Any suggestions?

  Hi void 1337,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also follow the link and check if it solves the problem:

   

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  You can also view the article mentioned below to learn more:

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

  http://Forum.AgeCommunity.com/

   

  Let us know if that helps.

• "The file is not found" error message when you try to view recent items list for word and excel files

  Title files: original vista on the recent items list does not open

  When I select a file from my recent items list, I get an error message indicating that the file is not found, but it lists the correct path to the file, and if you go to this path of the file, the file is clearly there.  This happens with word and excel files but not the adobe pdf files.

  Hi GillianMO,

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to send your request in the Forum Office for more specialized help.

  Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/Excel?page=1

• missing Windows Sidebar. C: Program Files Application not found.

  10 days ago everything worked fine, but now even if I want to customize my dock or I use D T the Application C:/Program Files etc not found keep appearing. Also, whenever I click on Google Chrome or IE etc etc, I get a box popping up that are asked to choose a program I want to open the file... Sidebar is gone too. Help!

  Hello
   
  1. don't you make changes before the show?
   
  As you have several questions on the computer, we recommend that you restore the computer to an earlier time when it worked very well for this problem. To restore the computer to an earlier time, try the following steps.
  1. Click Start, type system restore, click System Restore in the list.
  2. choose the appropriate date when the computer was working fine.
  3. follow the instructions in the wizard to complete the system restore process.
  4 restart the computer and check if everything is OK.
   
  For more information about system restore, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  We also recommend online virus scanner to delete all computer infections: http://onecare.live.com/site/en-us/default.htm
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Resource file < C_PsdRsDll > not found!

  I get the following error message when I try to open some applications.  After I click 'OK', the application comes finally to the top.

  Resource file not found!

  http://helpdeskgeek.com/how-to/resource-file-c_psdrsdll-not-found/

  --
  ..
  --
  "qmn007" wrote in message news: 0a864ebe-f1ab-49bc-bab2-4702f156c0ab...
  > I get the following error message when I try to open some applications.
  > After I click 'OK', the application comes finally to the top.
  >
  > Resource file not found!

• Image of the attribute: file is not found in the list of the packaged files:

  When Build in Webworks already, I still have the following 2 lines in the config.xml file, but it said ' image of the attribute: file is not found in the list of the packaged files.

  
   

  My full config.xml:

  
  "xmlns ="http://www.w3.org/ns/widgets "
  xmlns:CDV ="http://cordova.apache.org/ns/1.0" > "
    CarlogPro
    Service and gas logs
    http://Cordova.IO "> XpertLulu"
   
   
   
   
    subdomains of http://xpertlulu.com"="true"/ >
   
   
  

  Need help!

  Nevermind, I've upgraded v2.0.0.54 to v2.0.0.71 Webworks and it worked.