Jabber allows two UDS Server?
I have two domain. They are HK and Taiwan.
I connect two domain with VPN.
Can I use two services uds for contact?
Be setting in CUCM or jabber - config.xml?
If your question concerns two cucm different clusters then you can follow the deployment guide
"Resolution contact with multiple Clusters.
To contact resolution with several clusters of Cisco Unified Communications Manager, synchronize all users in the company for each cluster directory. Implement a subset of these users on the appropriate group.
CUCM-cluster-na for North America
CUCM-cluster-EU for Europe
In this example, synchronize all 40,000 users for both groups. Available to the 20,000 users in America on cucm-cluster-na and the 20,000 users in Europe on cucm-cluster-had.
When users in Europe call users in North America, Cisco Jabber retrieves the coordinates of the user in Europe of cucm-cluster-na.
When users in North America call users in Europe, Cisco Jabber retrieves the coordinates of the user in North America of cucm-cluster-had. »
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/Windows/9_7/ja...
The guide does not have any support for the definition of two servers NODES diff in the jabber config file.
HTH
Manish
Tags: Cisco Support
Similar Questions
-
Extend the current TMS Cluster with two new server
Hello
We currently have a cluster of two TMS-Server (13.2.1) installed on a W2K3 Server with a database on a SQL-Server separat
To have a smooth migration, we thought the following procedure.
Addition of two new server with W2K8 R2 by installing a TMS 13.2.1 to the cluster with access to the same database.
After a while remove the two old server and upgrade to TMS14 (updated TMSPE in advance).
Unfortunately, we get the message, as seen in the PNG-attachment during the installation of the first server in new.
Anyone know if we could proceed as described above?
Is the message because of the different operating system. If I click on 'Yes' former TMS-server still works?
Thank you
Concerning
Ingo
Hello
The error message is misleading and can be safely ignored, and you can continue with the installation of the new TMS nodes. It was deleted in 14.0 TMS, see bug CSCui34702.
Kind regards
Kjetil
-
Allow Exchange (SMTP) server by ASA 8.2 (5)
Please help me! Tomorrow, I have to go on a customer site and configure the firewall to allow traffic from the server through it.
I am CCIE Routing & switching certified. But did not have enough hands with the ASA.
Here is the configuration of the firewall running
QLC-11-FW-1 # sh run
: Saved
:
ASA Version 8.2 (5)
!
QLC-11-FW-1 hostname
activate 42Vosoeb.xpDtu0m encrypted password
42Vosoeb.xpDtu0m encrypted passwd
names of
name 10.10.128.0 comments
name 10.10.129.0 Guest_Wirless
name 10.10.0.0 Internal_Networks
!
interface Ethernet0/0
Description ' connection to BB-1-Gi2/5 ".
nameif outside
Security 0
IP 10.10.102.254 255.255.255.0
!
interface Ethernet0/1
Description ' connection to the BB-1-Gi2/3 ".
nameif inside
security-level 100
IP 10.10.101.254 255.255.255.0
!
interface Ethernet0/2
Description ' connection to the BB-1-Gi2/7 "»
nameif DMZ
security-level 50
IP 10.10.103.254 255.255.255.0
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
passive FTP mode
object-group network invited
The object-network 255.255.255.0 comments
object-network Guest_Wirless 255.255.255.0
object-group service Guest_services
the purpose of the echo icmp message service
response to echo icmp service object
the purpose of the service tcp eq www
the eq https tcp service object
the eq field udp service object
splitTunnelAcl standard access list allow Internal_Networks 255.255.0.0
outside_in list extended access permit icmp any one
ips_traffic of access allowed any ip an extended list
inside_access_in list extended access allow object-group objects invited to a Guest_services-group
inside_access_in list extended access deny ip object-group invited all
inside_access_in list extended access permitted ip Internal_Networks 255.255.0.0 everything
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
IP local pool ra_users 10.10.104.10 - 10.10.104.200 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Access-group outside_in in external interface
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 10.10.102.250 1
Route inside Internal_Networks 255.255.0.0 10.10.101.10 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
LOCAL AAA authentication serial console
Enable http server
http 192.168.1.0 255.255.255.0 management
http Internal_Networks 255.255.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set distance esp - esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map ra_dynamic 10 set transform-set remote control
map ra 10-isakmp ipsec crypto dynamic ra_dynamic
ra outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH Internal_Networks 255.255.0.0 inside
SSH timeout 5
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal GP group policy
GP group policy attributes
value of server DNS 212.77.192.60
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list splitTunnelAcl
username admin privilege 15 encrypted password gXmhyPjHxCEshixG
ahmed vDClM3sGVs2igaOA encrypted password username
type tunnel-group GP remote access
attributes global-tunnel-group GP
address ra_users pool
Group Policy - by default-GP
tunnel-group GP ipsec-attributes
pre-shared key *.
!
class-map ips_traffic_class
corresponds to the ips_traffic access list
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
class ips_traffic_class
IPS inline help
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:57e5e9b117c38869a93a645f88309571
: endThank you
So I don't see any configuration nat here, so I guess it's either a private wan or you have a router upstream do nat? If no Nat is required on the SAA so it should be as simple as
outside_in list extended access permit tcp any host mail server eq smtp
-
Get write access to the VI API to allow stopping a server ESXi via Toolkit VI
Referring to the above link and more precisely the following statement ' VMware ESXi 3.5u4 has just been launched and the internal API seems to have been fixed and exposed VI API will have only read-only access when you use the version of ESXi license.
I did some playing with 3.5u4 ESXi and use the VI Toolkit to connect to the host of 3i. I have been unable to stop the ESXi host as it gives me the error "fault. RestrictedVersion.summary ".
I understand the question (see this link fault. RestrictedVersion.summary).
My question is how can I pay for that to work (which agents do I need to buy).
In my scenario (small client under 15 users), I have a server terminal server in physics and I want to implement SBS on a box of 3i. I want to be able to issue a stop command to the area of 3i of the terminal server using the VI toolkit.
So I'm able to buy an agent / license to allow write access to the API?
My first thoughts were:
I need to purchase a license to host VirtualCenter for this box of 3i.
Then, he would be more free and I was able to 'write' API?
I guess on the SBS box, I wouldn't need to install virtual center, just the license service so I got somewhere to point the box of 3i in a location of license
VirtualCenter can be provided as a serial number or the host license?
Any ideas or suggestions?
I like the VI Toolkit to be able to issue the shutdown command, in turn will stop the VM guest for me.
At least you need the Foundation license which includes vCenter. Which will give you full access r/w to the VI API, this limited restriction applies only to the free version of ESXi, you are aware of.
This KB provides details on the type of license required for full access in RCLI: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006543
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
-
I got this code
If (Key.isDown (Key.LEFT) & & Math.abs (this ["speed" + who]) > 0.3) {}
_root ["car" + who] ._rotation = _root.rotationStep2*(this["speed"+who]/_root.maxSpeed);
}
How to allow for the space bar and left you knew without doubt that it wouldn't work but I tried this
If (Key.isDown (Key.LEFT.SPACE) not so lucky.) Not that it's too?
Can you proide me the correct key to allow the space bar and the left key pressed together.
Space bar is my booster.
If you want two conditions to be detected at the same time, you must test separately for each at the same time...
If (Key.isDown (Key.LEFT) & Key.isDown (Key.SPACE))
-
How to get firefox 4 to allow two separate processes run at the same time.
I'm used to be able to run two separate processes of firefox and so also run two separate user profiles at the same time as well. But I recently moved to firefox 4 and windows 7 and the other, or these two prevents the old method, I used to work. Basically I was running firefox (via 'run' or via an edited shortcut) with the following executable:
p - profilename - noremoteAnd it would launch a separate process that runs under the profile name. Is it possible to do this with firefox 4 and win7?
I am a developer (web and desktop applications) and it is highly preferable to do so. One of the reasons is that, if one of the processes one falls, the other is fine. Another is to have separate profiles so that addons with leaks of memory, like firebug, can be run in its own process and I can restart when I have to without affecting other processes. I sometimes also need to set the processor affinity so that a process of firefox is not a big eater.
Any help would be appreciated.The correct format for this command is -no-remote
-
U31-70 Alps touchpad - how to allow two-finger tap "right-click"?
Hello
I have a problem with the Alps touchpad in the U31. I would like to bring up the contextual (right click menu) with a tap two fingers on the touchpad, but everything simply, nothing happens. In the options 2 finger Alps touchpad click fires and the small sample animation clearly shows how a tap two fingers works as a right click.
I'm pritty sure this is a software / driver issue, but I have installed v8.201.1611.250 and no new version seems to be available.
Anyone else had this problem or knows how to solve?
Hey spidey101,
Thanks for your help! Remove and reinstall the drivers of the ALPS do not solve my problem, so I kept on looking and fortunately found a solution in this post:
https://forums.Lenovo.com/T5/Lenovo-P-Y-and-Z-series/Y50-70-Alps-touchpad-add-2-and...
In the registry settings, I changed the following parameters:
"HKEY_CURRENT_USER > software > Alps > Apoint > Guesture.
"2TapSupport" = dword:00000003
"Enable2Tap" = DWORD: 00000001
'2TapFunc' = dword:0000000 d
"2TapSetting" = dword:000000ff
"2TapShow" = dword:00000009!!! And I had to make the same changes in "HKEY_LOCAL_MACHINE > software > Alps > Apoint > Guesture ' in the work of tap to '2 fingers as a right-click' on my U31-70.
Best regards
-
I use an acer aspire laptop.
Can I change what plug an additional TV monitor
HDMA1 cable made. That is to say. not to turn off the power of the laptop screen and allow both screens at once. "HELP TO.
Press the Windows key + P and choose "extend" from the menu that appears.
-
Two tacas server on the same network
Hi all
Is it possible to have 2 radius server on the same network, if the first authentication server fails,
Then, the other will be the auth?
Thank you
Of course, is. Simply configure your network devices to switch to the alternate server if the first is not available.
-
Site2site two vpn "Server" for two different ISPS
Hello. I have two lines of two different ISPS. Both are 4 / 4 Mbit/s leased lines. I want to create a vpn site-to site with a few points of end for each of them. I have ASA 5540 firewall as a VPN endpoint on my network. My question is. I have two different VPN? Can I create two outside interfaces and use each one for each ISP one here to create my VPN? I first thought of contexts, but I abandoned em as soon as I saw that there's no VPN with contexts.
Thanks in advance.
Simple topology is
VPN - RTR - ASAOut1 VPN1ISP
-ASAOut2 VPN2ISP
Hello
I understand that you need create a tunnel between ASA 1 and 2 of the ASA with an ISP and the other tunnel on ASA 2 other ASA 2 ISPS.
It is possible as long as you take care of the delivery. For the remote access clients it will end interface ehich has the default gateway.
-
Desktop sharing, allow two users to connect on the same desktop
Does anyone know if view Horizon be configured in such a way that:
-Two (or more) users can connect on the same desktop
-vSGA can still be used
The reason why I ask, is that in my area there is a request for collaboration in which two people on different locations want to go through a 3D medical treatment plan and discuss on the phone. Documentation of the Horizon does not say that it can, but it does not say that he can't.
There is nothing on the Horizon that would in native mode. You must use a product type to have two people viewing the same third party screen sharing office.
-
TextInput restrict the attribute: allow two email addresses?
Hey all!
I have a textinput field that should be able to hold and to validate either:
(1) an address; or
(2) two addresses of email, separated by a comma
This is the code I use:
< mx:TextInput id = "user" color = "0x000000" creationCompleteEffect = '{sequenceEffect}' restrict = "" a - z A - z 0-9 ' \ - @. ' keyDown = "enter_button (event)" / > "
This works perfectly for an email address, but this is what happens when I type in two:
Y at - there no way to make the TextInput 'restrict' attribute one OR two @ symbols (and not just limit it to one)?
If it does not exist, how can I use a regular expression instead of restricting to accomplish this? (I can write the template - I don't know how to get TextInput use it restrict how it uses).
Thank you, all
-Katherine
It seems that you use standard mx:EmailValidator out of the box.
But your idea requires a class of custom, validator that can be built on top of the standard a substitution of doValidation() method, first you need to split an input string by ',' and go on every e-mail to super.doValidation (). Once you are done with the custom class assign it to the input box.
BTW: you must use restrict the attribute restrict = "" a - z A - z 0-9 ' \ - @., ', just re - use the existing capacities of EmailValidator. "
If you think this message responds to your question or assistance, please mark respectively
-
Unable to connect to presence server Jabber clients
Salvation;
I am a newbie in Collaboration and to learn basics who set up a small laboratory including 11 CUCM, presence 11 and two phones 7821 Cisco. I have configured CUCM and presence and set up a SIP trunk between them according to the documents. I tried to configure the client Jabber on Windows, but in vain. first of all, I created some local users on CUCM and have some LDAP users that have been synchronized with a test AD in which both the presence and the CUCM are members of this domain. I set up a local users CUCM for Jabber Client and to configure as follows to configure the Jabber Clients according to the documents.
My first question is the format of the user name that should be used with Jabber. client Jabber said we use "[email protected] / * /" format, but I saw the videos on the Internet using normal user name and password. regarding the fact that I have configured a local user for the Jabber CUCM, I entered in the form of "username" but Jabber said the format should be as "[email protected] / * /'." "
the second problem is that even after writing the user name in this format, the Jabber said that 'not to communicate with the server'. I can ping the CUCM and presence server both by using their ip addresses and hostnames through my PC on which is installed the Jabber. also I wrote serves him the IP address on the Jabber client while trying to connect the Jabber instead of their host names. is there any requirement to be member of a single domain?
I tried Jabber for iPad to connect to the presence, but in vain too. y at - it knows no question or tips about the present? Otherwise, I can explain the steps I went through them to set up the presence and the CUCM for Jabber clients.
best regards;
Because for the most part, allows you to know the details of connection SRVs and SRVs work based on the field.
You have successfully configured your SRVs according to configuration guides?
It is very likely that some missing config or a misconfiguration.
I have videos on how to configure the IM & P as well as Jabber config integration
https://www.YouTube.com/playlist?list=PLFuOESqSTxEvZChqWgAJanctohRMe99CR
-
RADIUS server two in 1 Cisco router
Hello
Just need to know if it is possible to use two RADIUS server in 1 Cisco router. The first server RADIUS authenticate remote users to access our internal LAN while the other RADIUS server will authenticate users who will have access to routers. The reason why we cannot use the same RADIUS server to authenticate remote users and users of router is due to our contract with our supplier (long story!).
in any case, if it's possible, could someone help me how to do or give me the link to the documentation.
Thank you
Yes, it's the way to do it. This gives you two different methods, the user.
connection key radius-server 1.1.1.1
RADIUS - 2.2.2.2 key server logon
3.3.3.3 RADIUS server remote key
4.4.4.4 RADIUS server remote key
RADIUS AAA server telnet protocol group
Server 1.1.1.1
2.2.2.2 Server
AAA-server group remoteaccess radius Protocol
3.3.3.3 Server
Server 4.4.4.4
AAA authentication login default group remoteaccess
AAA authentication connection group telnet
line vty 0 4
SUCH connection authentication
Line con 0
authentication of SUCH loging
This is an example which will allow your access telnet to the router to use a server group
while allowing your users to remote access use other radius servers.
-Jesse
-
Management node for two areas located on the same server
I need help to understand how to set up management node for two areas on the same servers. My configuration is:
Server A:
AdminServer to area D1
ManagedServer1 area D1
ManagedServer2 domain D2
ServerB:
AdminServer for domain D2
ManagedServer1 domain D2
ManagedServer2 area D1
Just to clarify, D1 and D2 are dev and qa environment. WebLogic configurations and domain are all in different and completely separate folders.
I started a manager based on java node on each server. Managers node configs are in different folders as well. Something is messed up, because it does not work properly. For example when I start nodes on server B Manager, he kills AdminServer for D2.
Can I have that one manager of the nodes in this configuration, and the problem is in the config somewhere?
I should have a management node on each server for each domain (two per server node managers?)
Sorry if this is a basic trick, I am newbie in the weblogic configurations.
Thank you
OlegNot sure why you have several domains. A server administrator can manage multiple clusters in a single domain. A domain is just a group admin servers and clusters. You could do something like:
Server A:
AdminServer domain D1 with 2 groups C1, C2
ManagedServer1 cluster C1
ManagedServer2 cluster C2
ServerB:
ManagedServer1 cluster C2
ManagedServer2 cluster C1that would allow you to use only 1 nodemanager by server
With your current setup, make sure that each of your domains using a Nodemanager port separate from each other. The default value is 5556, so if two of your domains use the same port NM, there will be a problem.
For example, with your domain name:
Server A:
AdminServer to area D1
ManagedServer1 domain D1 - use port 5556 NM
ManagedServer2 domain D2 - use NM port 5557
ServerB:
AdminServer for domain D2
ManagedServer1 domain D2 - use NM port 5557
ManagedServer2 domain D1 - use port 5556 NMYou will need set the nodemanager.properties and the configuration of the Machine in BOTH appropriate for each administration console. You should be able to run multiple nodemanagers on different ports.
Maybe you are looking for
-
Apple learning music preferences
On my first use of Apple's music, he asked me my musical preferences and it was really cool. What I want to know if the first installation program sets my preferences like never or according to what or how I listen to it it will adjust over time sugg
-
cchose option to transfer info to iCloud. Said may take some time to set up your Apple ID. Was slain here with the little thingie traffic for hours. What is going on.
-
840 G2 laptop EliteBook: 2 external displays
Hello I would like to know if HP EliteBook 840 2 supports 2 external displays. Thank you
-
Received message for paper jam / transplanted paperless. Check it, nothing found. Cannot remove the error message, and I am not able to print anything. It is my business.
-
Compressed files into Windows Media files & does not of course
All of a sudden my e-books and digital scrapbooking files, which have been compressed, transformed into a different type of file - unfortunately I don't know what, and I couldn't open them! I don't know how they got that way. I must have done somet