Extend the current TMS Cluster with two new server

Similar Questions

• Can I swap the SIM card from my iPhone more current 6s, back with a new iPhone free sim SE?

  Can I swap the SIM card from my iPhone more current 6s, back with a new iPhone free sim SE?

  The reason that I ask is that I would like to use the iPhone OS at work, and the rest of the time using my iPhone more than 6 s.

  Hello

  Yes, it should work ok with the same identifier apple for iphones.

  See you soon

  Brian

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter

• VMware device with 2 network cards claiming the same IP address with two MAC addresses

  Hello.

  I see messages intermittent my gateway network two MAC addresses associated with a virtual machine running on a 5.5 ESXi host for the same IP address.

  The virtual machine is a MiTel 3300 controller for a VOIP system. the system is configured with two IP addresses, one on the local network and another with a public IP address in the DMZ. In the network configuration of the 3300, I assigned the address LAN IP at 00: 0C: 29:30:B2:B2 and the DMZ IP at 00: 0C: 29:30:B2:BC (Mac for network devices presented by the ESXi host virtual machine).

  On the host, I configured a vSwitch with exclusive access to two physical network adapters on the host machine. The vSwitch is configured with two machine virtual port groups, LAN and DMZ, with access to the physical network interface cards. Tab grouping of groups vSwitch port NIC, I replaced the order of failover of the switch to activate an active NETWORK card only for the Group of LAN ports and the other card NETWORK only for the DMZ port group. (I don't know how the content of the column of networks is determined. Neither is correct for the traffic on the physical switch. If these are configurable, please advise and I'll change the settings). The relevant parameters of vSwitch, groups of ports and VM are distinguished below.

  On the virtual machine itself, through the VMWare host, I assigned 00: 0C: 29:30:B2:B2 for the Group of LAN ports and 00: 0C: 29:30:B2:BC to the DMZ group port (best I can tell, anyway, since the MAC address field annoyingly obscures the last two digits of the MAC address - break if I invert the mapping) (, but all seems OK).

  The goal here is to make sure that MACs of ports vSwitch the 3300 is listening and sending always correspond to the physical ports that are VLAN Tag by the physical switch to ensure the routing. Generally speaking, it seems that what is happening but, intermittently, we cross one-way calls that suggests a problem of routing between us and our SIP trunk provider; coinciding with these incidents, I get an email along the lines of "the security in the network device has detected a conflict of IP address with two or more devices. The period of INVESTIGATION "DMZ. DMZ. DMZ. DMZ' is claimed by the following clients with MAC addresses: ' 00: 0C: 29:30:B2:B2' ' 00: 0C: 29:30:B2:BC'. »

  I did something in the configuration that would lead to this kind of collision intermittent? Have a hacked together a way to do something that could be accomplished in a way that is simpler and more reliable?

  Thanks for any idea that you can offer.

  Kind regards

  J.

  

  

  

  I probably don't fully understand your configuration, but it seems that you are not interested in using the collection of NETWORK adapters in the virtual switch of the VM MiTel 3300.

  If it is correct, why not create two virtual switches, each with a group of port (LAN and DMZ) unique and with a separate connection of (vmnic2 and vmnic1)?

  In general, collection of NETWORK adapters may be used to share traffic between uplinks and ensure that if one of the uplinks connect fails, a virtual machine still has access to the network.

• Need help to set up Time Capsule to extend the current U - pay Wi - Fi.

  I am trying to extend my current Wi - Fi signal from AT + T U-Verse. I have a time capsule 1 TB and a Macbook Pro w/Retina Display. When I go in the most convenient airport Configuration it allows me to select "Extend a current network" but who is she won't let me go. The only option that it allows me to move forward with is to create a new network. I do not have the ability to plug directly into the router as I rent and do not have access to the actual router, just the Signal Wi - Fi. Please help with suggestions. I tried a factory with the time Capsule hard reset and still nothing. Thank you.

  Sorry, but the time Capsule and other Apple routers will expand only wireless network that is provided by another router from Apple.

  Another way of saying the same thing, it's that if you want to extend wireless network using an Apple product, you will need two of them... a close Uverse router/modem connected using Ethernet and set up to "create a wireless network"... and another airport located remotely to "extend a wireless network.

  Since you say that you can not access the Uverse router, that will make things very difficult.

  The only thing that peut work would be to add an AirPort Express and configure it to 'join' the Uverse wireless network. When she did this, it can then provide an Ethernet signal to the time Capsule, which in turn can be configured to provide your own private network.  In other words, the AirPort Express would act as a wire-to - Ethernet without 'bridge' to ensure the Ethernet connection that requires time Capsule.

  If you decide to try this, it would be a good idea to understand the return policy of the store on the AirPort Express before you buy. With unusual game like this, the only way you will know if it will work in your home is to try in your home.

• Help needed with two new HHD to RAID 1 PERC 6 / i integrated controller

  We have a client that has an out of warranty PowerEdge T610. On the Dell OpenManage Server Admin, I can see that he can see my 1 RAID PERC 6 / i integrated controller. On one of the controllers, we have a RAID 5 that has 4 discs dedicated to a data store (drive D), we two discs devoted to the Windows SBS 2008 (drive C) operating system on RAID 1.

  When we look at the server, I have physical disks located in:

  Our drive D data store:

  • 0:0:0
  • 0:0:1
  • 0:0:2
  • 0:0:3

  Our reader C found in:

  • 1:0:4
  • 1:0:5

  We just added two new hard drives for RAID 1 based on the conversation we had with Dell, they recommended that we can try from C data to the new larger disks. When to Dell Open Manage looking at the physical disks on the PERC 6 controller / i integrated, I can see that it has detected two new 500 GB SATA drives that the client installed. However the tasks available do not allow me nor their format to use as they appear in the management of the computer as a disk that is available for use. Is there something that we are completely absent here?

  Regarding the new disks located here:

  • 1:0:6
  • 1:0:7

  My options for available tasks are the following:

  • Blink
  • Unblink
  • Assign Global relief
  • Claire...

  I already have them deleted once as I didn't know if they should be formatted to be recognized, but in the computer management disk management they don't even appear at all. I thought that I had a task of 'on-line' that I could assign to the readers so maybe they appear to start to use the new storage HHD.

  With regard to the current firmware for the controller.

  • Firmware version: 6.2.0 - 0013
  • Driver version: 2.24.00.64
  • The Storport driver version: 6.0.6002.18005

  I have attached a PDF file to this post to view details on the disks. Sorry for the fine print, but it's a PDF so you should be able to zoom. Any assistance about why readers as not detected in disk management would be absolutely awesome. :)

  -Digity

  PERC does not support non RAID... you can just throw the discs and use them. You'll need to set up and initialize a new RAID array with the readers. It is not a task of "physical disk", therefore in OMSA, go to the page of the virtual disks and click the new link Wizard of VD at the top of the page to create a new VD of the BONE.

• By the way a cluster with table of a dll

  Hello

  I will try to call the GetVersionEX kernel32.dll function. (try to determien OS version)

  One of the parameters is OSVERSIONINFOEX with the following definition:

  typedef struct _OSVERSIONINFOEX {}
  DWORD dwOSVersionInfoSize;
  DWORD dwMajorVersion;
  DWORD dwMinorVersion;
  DWORD dwBuildNumber;
  DWORD dwPlatformId;
  TCHAR szCSDVersion [128];
  WORD wServicePackMajor;
  WORD wServicePackMinor;
  WORD wSuiteMask;
  BYTE WProductType;
  WReserved BYTES;
  } OSVERSIONINFOEX, * POSVERSIONINFOEX, * LPOSVERSIONINFOEX;

  I use the library function node call in Labview with a parameter that is defined as Type-> Adapt to the Type and Format of data-> value handles. (Please correct me if this is incorrect).

  I'm trying to define the OSVERSIONINFOEX structure like a bunch, but I fixed a problem on how to set the table szCSDVersion [128] so that it is not a pointer. I tried it as an initialied byte table 128 elements and string with 128 dummy characters, but the two end up being pointers.

  Attached is my cluster (which does not).

  Any help would be greatly appreciated in the definition of this group and finally call the dll function to get OS version information.

  Thank you

  James

  You need to create a cluster of 128 bytes and incorporate that into your cluster as szCSDVersion; a cluster of all of the same type is identical to an array of fixed size of this type.  The best way to proceed is to wire an empty cluster of U8 in table for the cluster, set the size of cluster to 128 and create a constant or a control.  Drop this cluster in the right place within the cluster that you pass to the DLL.  When you get the results back, you can use the cluster to table and u8 to string table to retrieve the data as a string.

• Impossible to extend the existing wi - fi with time capsule airport

  Hello

  I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).

  I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.

  In addition, I have an Extender provided by the ISP of lower level.

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  I tried several times to do so, but either it freezes up or creates its own network despite the

  mode bridge as stated in Airport utility.

  Guide gently with the method or Protocol correct to put that in place.

  Thank you

  Jay

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  It sounds like you may try to extend the network of your "main" router wireless

  The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station.  Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.

  So, the first question to ask here would be... What is the number of brand and model of your router "main"?

  If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network.  If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.

• Bookmarks toolbar icons opens the tab in the current window, but want a new window...

  The fix should be simple, but I can't. Help is appreciated.

  Probably not. There are a lot of tab on the extensions that can deflect a link that will open in the current tab in a new tab, but I do not know if opening links in a new window is supported by extensions such as Tab Mix Plus.

• How can I determine if the current date is between two dates?

  I'm trying to post a link when grave the current date between two dates. I have setup the startdate and the enddate. When he falls between the startdate one date enddate, the link will be apear. The startdate and enddate have already been formatted previously, as mm/dd/yyyyy. I tried to use the following script, nothing will do. What I am doing wrong?

  < cfif startDate GTE #dateformat (now (), "MM/DD/YYYY") # AND enddate LTE #dateformat (now (), ' MM/DD/YYYY') # >

  Don't know what you're talking about. I used the #dateformat(date_entered, 'mm/dd/yyyy') # for years without problem. I googled the datediff function before posting here and what I've found is datediff determines the whole number of units by which date1 is less than date2. I don't know how this can help me.

• Options of the tablet in photoshop with two monitors.

  Is there a way to make my tablet from Wacom intuos 3 ignore the second monitor, so I best action on my primary monitor in photoshop. I searched the Wacom driver settings with no luck. Will there be an option in the depths of the PS?

  I run two 27 "iMacs side by side. I have another iMac activated as monitor it's because I'm editing the media I create in Ps in PR.

  Thank you

  Scott

  Hello, on the Panel of Wacom preferences (from your system preferences), it is possible to configure the screen area that the Tablet is mapped on tab "Mapping" that you then need to deselect the screen area: all the, and then set the screen area to use.

• AP541N cluster with Radius UC540 Server?

  Hi, so using the radius in the UC540W Server works a treat if the wireless network comes from the CPU area.

  But if the AP541 is serving the wireless network, I can not RADIUS to work.

  I have removed all my networks in the UC area and have disable the wireless interface (tried with the wireless active too).

  The local RADIUS is active and the installation program on the CPU area.

  But still nobody can join and authenticate!

  Any ideas or advice? Known issues?

  I followed all the directions to a tee!

  Hello Jeremy

  Thank you for contacting the Support Forums of community of Cisco.

  When you use a UC540W with an AP541N, it is suggested to not use the AP and turn off the wireless on the UC540W.

  To use Windows clients, the authentication server must support PEAP (Protected EAP) and MSCHAP V2. How is your Radius server in the setup of UC540W?

  To ensure that the radio itself works OK, can you, or have you tried to do just the WPA or WPA2 with regular encryption. See if you can connect, authenticate and roam the network.

  Please keep us informed.

  Eric Moyers
  Concentrix at Cisco. : | :. : | :. CISCO | Eric Moyers | Expert in the field. Cisco technical support |
  [email protected] / * /.
  Together, we are the human network

• Deploy the adf on glassfish with oracle database server.

  I am trying to create a connection from the pool on glassfish 4 oracle database server.

  but I could not. I was trting to ping and show this error ping Connection Pool failed for audio. Class name is incorrect or classpath is not set to: oracle.jdbc.pool.OracleDataSource

  GlassFish 3.1 is supported, 4.x is not.

  Oracle JDeveloper and ADF 12 c (12.1.3) supported systems

• How to put in place the new Airport Express to extend the current wireless WiFi U-Verse home network?

  Hello

  What are the steps for the creation of a new AIRPORT EXPRESS MC414LL/A Terminal so that it make that expand my network existing wireless, using my current AT & T UVerse equipment home.  Here are the details...

  Internet service provider: AT & T U-Verse

  Existing facilities: primary AT & T provided router/Modem: ARRIS NVG589 (reference 587234-004-00) that manages my house wired and wireless Wi - Fi.

  PROBLEM: Does not offer full Wi - Fi coverage

  SOLUTION: Attempt to add a new Terminal Airport Express so that it will extend coverage of the existing Wi - Fi network wireless.  I plan on the use of certain features such as streaming my content from iTunes to my sound, surround sound, etc Airport Express Library.

  NEW FEATURE: APPLE AIRPORT EXPRESS 802.11n Wi - Fi PART # MC414LL/A

  I wish I had AT & T equipment to continue to manage the Wi - Fi and network functionality (DNS, firewall, etc.), as it currently does.  However, I want to use the Airport Express to extend Wi - Fi coverage.  I already have a cable ethernet from the floor and the AT & T ARRIS NVG589.  I just need to know how to set up my new Apple Airport Express.

  Thank you!

  With the Express connected to Arris gateway with Ethernet, you have the basis for a roaming network.

  I would recommend that you run the AirPort Utility and allow it to run automatic installation of the Express. The utility should detect that the Express is connected by Ethernet and go through the steps to properly set up. Note: If you have made any changes to the Express since out of the box, I strongly suggest that you first perform a 'factory' reset on it to make sure that the installation went well.

• Can I add a newer version of ActiveMQ by extending the current plugin?

  currently the version open source hyperic monitors only up to 5.3 ActiveMQ, can I extend to monitor 5.4?
  
  I expect to be able to add a new xml plugin which stretched the activemq - plugin.jar like this:
  
  <? XML version = "1.0"? >
  
  <! [Plugin DOCTYPE
  <! Activemq SYSTEM ENTITY "/ pdk/plugins/activemq-plugin.jar" > "".
  ] >
  
  < package = "org.hyperic.hq.plugin.activemq plugin" name = "activemq - 5.4" > ""
  
  < name of the server = 'ActiveMQ '.
  version = "5.4.
  include = "5.3" >
  < / Server >
  
  < = "ActiveMQ" embedded server name
  version = "5.4.
  include = "5.3" >
  < / Server >
  
  < / plugin >

  Hi Doug,.

  I actually misread your example and to do that you must rebundle the package.  There are current plans to stay at the top of the fastest versions like that changes to eliminate the need to do it yourself.