Jabber (Internet) video->;->;->;->; Jabber CUCM VCSC VCSE for windows
First of all, I tried Jabber Video (Intranet)->->-> Jabber CUCM VCSC for windows, video and audio are fine, by establishing a SIP trunk between VCSC and CUCM and Zone rule settings and VCSC research.
Secondly, Jabber (Internet) Video-> VCSE-> VCSC-> Video (Intranet) Jabber, audio and video are very well by estalishing TraversalZone between VCSE and VCSC, as well as the search area in VCSE and VCSC rule.
There is an obvious idea comes... Jabber (Internet) video->-> VCSC VCSE-> CUCM-> Jabber for windows.
I tried by two means:
Option A: I try through Jabber video (Internet)-> VCSE-> TraversalZone-> VCSC-> SIP Trunk-> CUCM-> Jabber for windows, acutally, there isn't any configuration required in VCSE/VCSC/CUCM, because when you dial [email protected] / * /, the VCSE will route the call to the VCSC and then it will move the call to CUCM, but I couldn't get to this subject, the logging of the VCSC He always showed in the message below:
1. received VCSC VCSE SIP protocol prompt, call [email protected] / * /
2 VCSC answered VCSE SIP 407 Proxy authentication required.
3 VCSE answered the VCSC SIP ACK
I don't know what is the problem here, or additional configuration required, but the call to certainly VCSC already, but I don't know what is the way of the authentication of 407 proxy here... If the Jabber (Internet) Video-> VCSE->-> Video (Intrante) Jabber VCSC, it isn't this 407 proxy authentication in logging.
Option b: I'm going through Jabber video (Internet)-> VCSE-> SIP Trunk-> CUCM-> Jabber for windows, with the rule of necessary research, in this way, when Jabber (internet Video) composition Jabber for windows, it sounds, and when picked up, one way audio (from Jabber for windows to Jabber video) set up, no video.
It is normally an authentication problem. I think that you run a software X7.x on your SPRDD? If so, try to activate "treat as authenticated" on the crossing area 'Authentication policy' (both directions, if it is set to "do not verify the credentials") and see if you get the P - asserted-Identity "authenticated" a header then and make a call from the internet, routed throug the VCS - c to your CUCM.
Are your rules of research on the VCS - c, the value "request must be authenticated = Yes"?
Hope this helps,
Arne
Tags: Cisco Support
Similar Questions
-
How can I download Internet Protocol Version 6 (TCP/IPv6) for windows 7
I am not really satisfied with windows 7 home Priemium 64-bit, I don't know and I don't know how I can download Internet Protocol Version 6 (TCP/IPv6) for windows 7, besides that IE 9, cannot download and run Adobe Flash 10.6, Microsoft and Windows begins to find quick solutions or we also have the right in our country to take Microsoft and justice exactly the same If someone used a not registered copy.
Concerning
Angry Sam
Follow these steps:
Click Start, type: network connections.
Press enter on your keyboard
Right click on your network connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Select the check box next to the Internet Protocol Version 6 (TCP/IPv6).
----
Please note that if you use a 64 bit version of Windows 7, you must use the 32-bit version of Internet Explorer that is included with the operating system. Adobe Flash Player is not commercially supported by the 64-bit version of Internet Explorer still under Windows 7 currently.
Click Start > all programs > click Internet Explorer (one who is not listed as 64-bit)
Adobe Flash Player not is not supported for playback in a 64-bit browser
http://kb2.Adobe.com/CPS/000/6b3af6c9.htmlI have Windows 7 64 bit and you need to use Internet Explorer 32-bit
-
You need Internet Explorer 5.5 or higher for Windows to use the Services of eRestaurant
You need Internet Explorer 5.5 or higher for Windows to use the Services of eRestaurant
Best place for support on this issue would be here...
-
I am running windows vista Home premium, on a system 32-bit HP Pavilion dv9700 op. I have internet project 8 service pack 2 of windows and norton security suite installed on my computer. I do not understand why these 2 updates keep do not install unless it didn't, but they are listed under important updates in the windows updates, can you please help me, maybe I don't have not enough memory on the left?
Thank you!
Windows Update error 80070490
If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.
The System Update Readiness Tool for Windows can correct some conditions that causeWindows Update error 80070490. You can access and run this tool by reading this http://support.microsoft.com/kb/947821 on the Microsoft Web site.
If the system update readiness tool solves the problem, you need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.
Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD. RepairWindows, follow these steps:
Close all programs and restart your computer.
Insert the DVD into your disc drive. Wait for the installer to start. If the installation program does not start automatically, follow these steps:
Click on start and type Drive: \setup.exe in the search box. ReplaceDrive with the letter of the DVD drive of your computer (for example, D:\setup.exe).
List programs, click Setup.exe.
Click on install now.
Click go online to get the latest updates for installation (recommended).
If you are prompted to do this, type the Windows product key.
What type of installation you want? window, click upgrade.
Once the installation is complete, restart your computer, and then run Windows Update.
If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Internet Explorer 8 and update security for Windows Vista (KB981852)
Windows Update again to update me this 2 things. And when I click on update, State of KB981852 says successful but when I restart my computer windows update asking me to update again. For IE8 it says "put in place cannot continue because a newer version of Internet Explorer 8 has been detected on this computer." error (s) found: Code E
See http://www.bleepingcomputer.com/blogs/mowgreen/index.php?showentry=1655 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: Plugin required
I need a Window Media Player Plugin to access a video presentation on a Windows 7 Web site for use with FireFox. I'm not finding what I need.
Please read and follow the instructions here: https://support.mozilla.org/en-US/kb/play-windows-media-files-in-firefox?redirectlocale=en-US&redirectslug=Using+the+Windows+Media+Player+plugin+with+Firefox
I hope this helps.
See you soon,.
J
-
Update for windows 7 (KB980408) mess my laptop
Please help me.
Essentially as usual, I went my selected update all then press download and install. I continued as usual, but then my screen went white with the little line blinking in the upper left corner. Then the screen went completely blank. After a few minutes, I close my ny computer holding the button pressed, then again it upward. I chose to start normally thinking that it was just a glitch. Then when the small icon of windows of red, green, yellow, blue came he says below that it was set up updates then began counting up to 3,000 or more. After he was done, I heard c, ding, ding, but the screen remained the same after a few minutes I restarted my laptop again with the button chose to start in safe mode and then use the system restore to repair computer. I need to know how to get this update or if I even need? I am running windows 7 Home premium on a computer laptop hp compaq presario and I'll give you more information for those who ask. I will not update until I know what to do.
Thank you
PS update was "update for windows 7 (KB980408)' with-"Intel Corporation - display - Mobile Intel (r) 4 Series Express Chipset Family"" Update for Internet Explorer 8 Compatibility View List for Windows 7 (KB980302) ""update for Windows 7 (KB975496)"" Update for Windows 7 (KB975422) ' and 'definition update for Microsoft Security Essentials - KB972696 (definition of 1.81.746.0)' I do not know if a of these had to do with the problem.»
Thank you. I fixxed the problem and I was able to boot from my 7 disc. I did a system restore and I blocked the update so that I would never do it more. Thank you for the help guys.
-
Help me find Pavilion hp 15 e. - 016tx drivers for windows 7
Hello, can you help me find the video, USB and Ethernet drivers for Windows 7 64 bit, model e-016tx. ? I tried all the drivers listed in the product page, some of them worked (like Wifi, bluetooth etc.)
Drivers, I tried: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5389...
Technical product page: http://support.hp.com/us-en/document/c03820394
For the video, I downloaded from the amd download page: http://support.amd.com/en-us/download
By selecting the AMD Radeon 8600 M, OS win7 64 series, it installed but still standard VGA device drivers is active & there are yellow question mark shown driver Radeon.
Thanks, Mahesh S
Here are my laptop model and serial number:
Model: hp pavilion 15 e. - 016tx
Serial number[personal information deleted]
Product E3B56PA number
Warranty the warranty status
Category factory warranty
End of warranty date 2014-10-13You are the very welcome.
If your laptop comes with the W8, the key in the BIOS should work with this ISO file.
If your laptop comes with W8.1, the key in the BIOS will NOT work with this ISO file.
-
How to take backup for VCSC, VCSE, MCU and TMS. I'm new in the world of video. A brief step by step would be appreciated.
You can back up each server by following these steps:
For VCS, see "Backup and recovery of data from VCS" section in the Cisco VCS Administrator Guide X8.5, page 340.
For MCU, see "upgrade and save the MCU" section in the Cisco Telepresence MCU series online help 4.5, page 212.
For MSDS, see back up and restore SQL Server databases you will back up the database of TMS 'tmsng' of the SQL Server itself. It could either be hosted locally on the TMS server if you have installed TMS with the default settings, or an external user provided SQL server.
-
dial the internet video SX20 with cucm
It's a possible scenario?
SX20 (Sip)--->---> Internet video CUCM advantage?
Thanks in advance
If you want to use Jabber for Windows, you just need C/E motorway. You will need the licenses of session Rich media for each simultaneous video call, you need to make to another company, such as cisco or other. No permit only required for audio/video/call within your organization. Its pretty simple IMO.
-
Integration: Jabber with VCSC
Hi experts,
I'm new in the world of telepresence and I will install into a new customer a solution with VCSC, TMS and MCU.
The customer already has a CUCM with Jabber and they want to deploy the Jabber with VCSC, they want that, for example, a Manager actually a video conference with other offices through your Ipad with Jabber
I have not found a document with this configuration, can someone help me with the documentation of this integration?
With their experience of telepresence, including the complexity of this integration? Can give me of highlights and key points of this integration?
Best regards
In addition to what Alok suggested, there are other things, you should consider:
- The version of the recommended software is CallManager 8.6.2 and later (you can try 8.5.1, but there is no support BFCP)
- It must integrate CallManager and VCS by following this document:
- To enable content sharing between registered in CUCM Jabber and the end point registered in VCS, make sure that your Jabber in CUCM devices have a SIP profile with BFCP protocol enabled, as well as the setting "Allow presentation sharing via BFCP" set to allow.
- If you want to schedule conferences in MSDS for the Jabber in CUCM, you can add them to TMS as a 'room '. By using this option, you will be able to plan the Conference and the calendar control (it's better than using the Participant model)
- About the phone book, you might have some problems. If your devices registered in VCS use device with an alphanumeric URI address, for example [email protected] / * /, you will not be able to add this contact to Jabber clients registered with CUCM, alphanumeric once is not supported. A solution would use only digital device address for all devices. About Jabber for Telepresence, you can define directories using TMS, in this case, you can add contacts without problem, either using a digital or non-digital address.
- If you have endpoints another enrolled in CUCM who will call the end points registered in VCS, make sure your devices are running compatible software versions, mainly the videophones. It is strongly recommended to use the latest version of the software.
- Be aware that Jabber for Telepresence doesn't support Instant Messaging, as the common Jabber support with presence server
I hope this helps.
Paulo Souza
My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."
-
Move the CUPS 8.6 to GI &; P 11.0 - client for Windows 10.6 Jabber
Hi community support
We are modernizing our environment voice of 8.6 to 11.0 CUCM, CUPS, CUC and UCCX including passage of MCS including Cisco UCS servers. Regarding CUCM, UCCX, and CUC I just finished these several times in the past and we have a detailed plan. Regarding the CUPS/Jabber, we always try to finalize the design of upgrade and after reading many documents and a few good videos by Jaime Valencia our particular upgrade scenario is still uncertain.
We were using Microsoft OCS and decided to migrate to CUPS/Jabber so we have 3 groups CUCM we created 3 only the CUPS server clusters (Let's put HA when we go to Cisco UCS, but at the time we had only 3 MCS spare servers) and they have peers inter-classes.
- We use a single domain across all 3 groups.
- 100% of our users use IM & P through integration of voicemail and calendar and call control
- 10% of our users have also softphones
- We do not use SRV yet for service discovery due to having 3 groups on 8.6 so we Jabber for Windows 10.6 bundled with Microsoft SCCM, specifying the Type of account as Cisco IM & presence and login server 'use the following server' that points to the Publisher of CUPS.
- First time users will have to specify [email protected] / * / how he discovered the area, use only the user name and password to connect, after which its caching and all connections are automatic.
My questions are:
- When we improve CUPS 8.6 to IM & P 11.0 ourJabber for the client configuration Windows 10.6 will continue to work without modification?
- We currently link to the Type of account 'Cisco instant messaging and presence', this allows us to use IM & P and the voice that is to control the calls and softphones, you would select Account Type Cisco Unified Communications Manager in what scenario?
- We want to use SRV for the Discovery Service, but as we have 3 groups who are upgraded in an approach by steps are better wait we have updated all 3 groups, we can use a single SRV for multi clusters with ILS?
- When you first connect to Jabber, you must enter [email protected] / * / while he discovered the field then we just enter username and password (less the field), the average of SRV service discovery simply enter the user name and password once without the specified domain?
- This SRV for the discovery service also provides the AP for connection if the main server is down or is making another way?
Thank you, Carl Ratcliffe
Preston, Lancashire England
Yes, the configuration remains the same
As for the second question, read here:
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/10_6/planning-...
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/10_6/CJAB_BK_C...
As now CUCM is one that handles services profiles, which define everything, you want to use _cisco-uds
#3 Yes, you probably want to wait to get them all in the same release, then make sure THEY works very well, and then configure the SRVs
#4 Yes, the first time, it will ask for [email protected] / * /, once he finds the SRVs it caches the user and you need only the password.
#5 Yes, you can configure the SRVs for all servers in the cluster.
-
Jabber for Windows 11.5 and connection of the unit - German special characters in password
We Jabber for Windows 11.5.2 running and using the connection of the Unit 10.5.2. Whenever a user uses a password with the German special characters (a, o, u), Jabber is not able to connect to the connection of the unit. Everything else works fine. We also have this problem in 10.6 versions. In the voicemail tab it is said that the name of user or password is wrong. We can reproduce the problem...
BTW. also it does not work in the current jabber for iOS version!
Anyone know if it's a bug or experiencingthe same problem?
I simply make the point that use German special characters causes a lot of problems, in many places, whole CUCM and IM & P and you avoid them.
-
Cisco's Jabber for windows certificate error
Hi guys,.
Today, I am unable to connect to my Jabber account.
IAM using Cabber for Windows 10.6, it worked very well for centuries.
Please find attached the error message.
Thanks in advance
Have you reviewed the previous discussions on the same behavior and FIPS?
-
Cisco Jabber 10.5 for Windows boot process
Hi guys,.
I had following problem and impossible to find a clue that can move me somewhere.
A customer has a jabber Cisco 10.5 deployed and integrated with Active Directory.
Every day, customers are initializing requests of sends customers jabber with phone numbers against the AD domain controller (these figures are not the contactlists - personal or company) and as there is that much more of this question in a moment the utillization of the announcement is almost 100%, which also makes the problem with the connection in outlook (is also integrated with the Cisco Jabber for windows)
I searched the Web for tips but have not found anything.
My questions are:
The data for Outlook Personal AddressBook starting the Jabber questioned via Jabber Localy or domain controller?
What is the process of starting the Jabber for Windows on the integration of directories?
Is this a normal behavior of jabber?
#####################################################################
Here is the configuration of the config.xml file - jabber (passswords and areas are changed):
BDI
AD
AD-IP address Field of presence
389
DC = presence, DC = domain
Username
Password
Fake
True ###########################################################
Hello
Jabber will not interview contact Outlook address book DC until a manual search is made.
Also default contact jabber, the domain controller for the windows PC host.
Each time that you enter at least 3 characters (default for search), jabber first find cached contacts, then outlook address book and then search the directory.
The attached config file is BDI type ie. for MAC computers, it will not take effect in windows PC.
Maybe you are looking for
-
Using iCloud Drive on iPad as a backup documents, music and photos
Hi all With my trusty laptop Windows now 6 years old, that I am looking to replace that with an iPad Pro I feel this will do everything (and more), I would need a laptop. My question is about the storage and backup of my documents, music and video fi
-
TFncKy.exe repeatedly crashing in Windows XP
Hi all I had a problem with the program TFncKy.exe since I bought my new Satellite M100 approximately a month or two ago. When I log on Windows, this program crashes before I press a key, and without worrying about know if I chose "Send report" or "d
-
Thank you Mick: This information has been useful and I'm glad I read through it to better understand how to work the partiions. Having said that, however, I need not expand c:\ and/or remove d:\. I just need to remove a version of Vista installed d
-
Howdy, first post here - rules of noob. Search for as well as I could but have not seen this answered. Recently, we changed the place of our home network router. We cannot reach our hp color laserjet cm2320nf mfp (ff3be2) Ethernet cable not more.