Move the CUPS 8.6 to GI & P 11.0 - client for Windows 10.6 Jabber

Similar Questions

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• Error code 80073712; the installation of Powershell 2.0 and WinRM 2.0 for Windows, 34.3 MB failed. Why he moved?

  Icon bottom right of my screen windows update said I got a major update and three optional updates. I tried to install the update important Powershell 2.0 and WinRM 2.0 for Windows, 34.3 MB. The installation failed. History of the update of the review, I have seen that this is the third day, the installation failed for my scheduled time of automatic updates. Why he moved? If I really need to install it, what can I do?

  Hello

  1. are you able to install other updates successfully?
  2 have you made changes on the computer before this problem?
  You can read the following article.
  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/957310
  Note: make sure that you back up all your data before you begin the installation. Check out the link.
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  See also:
  You receive the error code "0 x 80073712" or the "Windows features" dialog box is empty when you try to install the updates or components in Windows 7 or Windows Vista
  http://support.Microsoft.com/kb/931712
  It will be useful.

• I'm unable to install the Microsoft. NET Framework 4 client for windows 7 X 64 profile base system. Any ideas?

  Original title: Microsoft. NET Framework 4 client for windows 7 X 64 profile base system

  I'm unable to install the Microsoft. NET Framework 4 client for windows 7 X 64 profile base system.

  Any ideas?

  Thank you.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I understand that you have a problem with the installation of Microsoft. NET Framework 4 client profile. I will certainly help you in this matter.

  Provide us the following information to better help you.

  • Have you made changes on the computer before this problem?

  • You receive an error message/code?

  Follow the below methods:

  Method 1:

  The .NET Framework 4 Client Profile is available on Windows Update
  http://support.Microsoft.com/kb/982670

  Follow the method 1 and method 2 in the article and check for the issue. If the problem remains same follow method 2.

  Method 2:

  Disable the .net framework Windows feature on or off, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. to turn off .net framework, click the media feature. And the .net framework and click OK.

  c. restart the computer to apply the changes.

  Note: follow the steps above to activate or activate the .net framework and check if the problem occurs.

  For more information, refer to this link turn Windows features turn on or off:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Please let us know if you need more assistance.

  Thank you.

• Delete the profile of AnyConnect secure mobility Client for Windows

  Hello

  My Cisco AnyConnect Secure Mobility Client for Windows (Version 3.1.04063 in fact) has stored some Clientprofiles. How can I remove one of these profiles if I do not need more?

  I already searched the registry and the file system but without success. I don't know where this information is stored.

  Any suggestions?

  Thank you

  They are individual xml files in a hidden directory. The location on Windows 7 is:

  C:\ProgramData\Cisco\Cisco AnyConnect secure mobility Client\Profile

  The complete inventory of their storage location for various operating systems can be found in the Guide of Administration AnyConnect.

• I just tried to reinstall Acrobat 9.0 on my Mac. I'm going to the message I had the serial number does not match to. I bought for Windows in 2010 and he switched to Mac using Adobe. I now cannot install and this forum was fired by news

  I just tried to reinstall Acrobat 9.0 on my Mac. I'm going to the message I had the serial number does not match to. I bought for Windows in 2010 and he switched to Mac using Adobe. I now cannot install and this forum has been returned by the current agent. Can someone please? I don't have the funds to buy it again. Thank you.

  You can only do it in 1 or 2 years after purchase.  If you don't have that you received a serial number mac.

  check your account, Adobe ID Code

  If she is not there and you don't have to record the serial number of your mac on and fix you is perhaps not able to activate acrobat 9, but there is a chance adobe support would help.  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Windows 7 to stop working.

  Original title: Updates

  The last update update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Win7 stop working. This includes IE8, MS Office10 and a few others. Whats with THAT! I have updates blocked for now, until the writers get it sorted.

  Hello

  The article mentions that this update cannot be uninstalled. This software update is a prerequisite to install a service pack. In addition, this update improves reliability when you install or remove service packs and updates for Windows Server 2008 R2 and Windows 7.

  http://support.Microsoft.com/kb/976902

  Since you have problems with Internet Explorer 8 and Microsoft Office 2010 after installing the update, I suspect the involvement of a third party software conflict. I would like you to put your machine in aclean boot State in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart the computer as usual.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot save the Windows7 home premium product key, can not download updates for windows and Bitdefender

  Hi, recently I bought windows 7 Home premium (also confirmed with microsoft that the product key is valid). After the installation, I get a message saying that I could be a victom of counterfeiting. I am not able to record the product key, even for anti virus (Bitdefender) bought. Also, when trying to download the updates, I get a message that the pc is not connected to the internet, it is in, all lights green. How do I, please help?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Windows 7 64 bit and the need to install 32-bit and 64-bit client for Oracle 11 g

  Hello
  
  First of all, I'm sorry to ask what is probably a common response to the knowledge of most in the forum. I can't find a straight answer, the search of these forums or via google.
  
  We have Windows 7 64 - bit in our next update office. We have several Oracle databases, and all client software in our environment is 32-bit.
  
  I want to try to be at the forefront, so I want to deploy the latest version of the client 64 - bit 11 g instead of our current client (10 g 32-bit).
  
  The simple question is this: can we actually do with our suite of 32-bit applications or do I need to install the client for 32-bit to 32-bit applications side-by-side with the customer of Oracle 11 g 64 bit for future 64-bit clients?
  
  For the future that, if I do, then someone good instructions on this? I found an article about it, but it seemed personal and made use of the mklink command, so I have my doubts it is correct.
  
  Thank you

  I think that you need separate 64-bit and 32-bit clients

  HTH
  Srini

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• You can hide the updates of the language, so that they do not appear when checking for Windows updates?

  When running Windows updates, you can hide updates of language so that they do not appear every time that you check the optional updates?

  You can hide updates, you don't want to-

  1. click on view available updates
  2. right click on the update you want to hide
  3. click on hide the update
  4. confirm the UAC if necessary

  Do this for each update, you do not want to install.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I have to keep the free version of AVG Anti-VRUS after paying $100 for Windows antivirus rampart

  I have to keep the avg software after installing windows virus anti-rempart?

  Windows Antivirus rampart is a rogue fake antivirus (ie.malware - you are infected). Do not remove your AVG, if she is still functional and up-to-date, run a scan complete. If AVG has been disabled, follow the instructions of mutual assistance on the link below.

  Windows Antivirus Rampart removal Guide
  http://www.bleepingcomputer.com/virus-removal/remove-Windows-antivirus-rampart

  If you paid for the program, that I suggest putting an order to stop payment on it through your bank orcredit card provider.

  Also consider contacting AVG support for the assistance of the abduction. http://www.Avg.com/us-en/support

  I hope this helps.

  [Edit: by quietman7 suggestion see also 'How to use Malwarebytes Chameleon']
  http://www.youtube.com/watch?v=nxabxxG2vNA ]

• I had to put my laptop to the original on the parameters of the box and now I can not get all updates for windows vista home preimum

  I have reset my Toshiba laptop for the orginial on the parameters of the box using my recovery disk that came with the laptop when I bought it years ago. Now reinstall and update of windows, I can not service pack 1. He said that the system may reboot several times, blah blah blah, it is said installed. I just want this computer up-to-date with all the updates. Its use will be mainly internet, e-mails and word documents. Help, please

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Recently, I did the update of security and had 17 updates to install for Windows Vista Home Premium SP2.

  Recently, I did the update of security and had 17 updates installed.  After installation I closed the computer for the day.  The next time that I started it upward, I received a stop error message 0x81ecbe79 and he started a reboot loop and I kept getting error code 0 x 81 different whenever it restarted.  The first 4 digits are the same with the rest changing with the exception of the 79 at the end.  So far he has done about 30 times until I finally stopped him frustration.  Also sometimes it would ask if I wanted to check on the web for a fix, but he continued the loop.  The loop stops at different places during the boot sequence.  Once he got almost completely before it restarts and a couple of times, it was in the screen of welcome and rebooted.  Is there a fix or do I have to do a clean install?  The way it is now I'm not sure that I can make a back up of my wife's Family Tree Maker files and get it all.

  1. try to restore the system and if necessary a startup repair.

  2. data recovery.

  3. where questions of Windows updates.

  1.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  2.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  3.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows XP has an icon to go directly to the desktop. How can I get these an Iconm for Windows 7?

  Windows XP has a right to the icon next to the Start button that allowed access to the desktop.  I can't find in Windows 7

  Windows XP has a right to the icon next to the Start button that allowed access to the desktop.  I can't find in Windows 7

  Hello

  Look at the right end of the taskbar.

  You will see a small Vertical button. It's the button show desktop in Windows 7.

  Concerning