Jabra HALO Bluetooth headset

I just bought a JABRA HALO Bluetooth headset for audio because my audio port is broken, I have a targus bluetooth dongle.  When I connected it to my blackberry storm 2 audio sounds great, but when it is connected to the computer, it resembles _.  The manual says it takes A2DP for sound good, which is not available in this thing or what I need to make changes to my computer to make it sound better?

Hello Brennan has,

·         You have installed the drivers for Jabra Bluetooth device on your computer?

Check if the headphone is compatible with Vista. You can follow the link below and check if your model of headphones is compatible with Vista:

http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

You can also consult www.Jabra.com of on the compatibility of the headset status. Here is a link I found for Jabra support:

http://www.Jabra.com/sites/Jabra/na-us/headsetsupport/pages/JabraHALO.aspx

Here are the steps that I found on the site of Jabra to solve this problem:

Make sure that the device supports Bluetooth 1.1 or higher, including the Advanced Audio Distribution Profile (A2DP) for music streaming.

If the procedure above did not help, then it is possible that your phone is using the stereo audio connection in a different way. You can enable this mode on Jabra HALO by performing pairing in the following way:

1 remove the of Jabra HALO Bluetooth connection on your phone.

2. make sure that the headset is turned on (not folded)

3. press in and hold the answer / end button for more than 5 seconds until the two displayed icons are solid Orange Blue and solid

4. go through the regular steps to pair the headset to a Bluetooth device.

5. be aware that the latency time of the Jabra HALO can be lower when using this pairing.

Here are links that you can reference:

http://www.Jabra.com/sites/Jabra/na-us/headsetsupport/pages/MobileKnowledgebase.aspx?kbid=f399f523-526e-40D6-b2d3-499ff20f7536

Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Jabra Halo 2 driver not available in Windows 7

    I tried to pair my headset Jabra Halo 2 to my PC running Windows 7. Matching ends, but Windows shows the helmet as works do not and gave the reason that no driver available.

    Can you let me know where I can get the correct bluetooth driver to make it work?
    On my laptop Lenovo, pairing is successful without the need of a driver of Jabra Halo 2.

    Hi Francis,.

    There is no information on the Jabra Halo 2 for Windows 7 in the Center of compatibility.

    1. You see an error message for the helmet in Device Manager?
    2. Other Bluetooth devices work properly on this computer?
    3. When you say that it works very well on a laptop Lenovo's laptop running Windows 7?

    You can visit this link and check:

    Error: "device driver Bluetooth not found" when you try to connect to a Bluetooth device

    You can refer to this inkand also to contactJabra for assistance.

    Please report if you have any questions on the issues related to Windows.

  • Bluetooth headsets?

    Someone been able to pair a headset bluetooth with the Xoom? I have the WiFi Xoom and Motorola S10 - HD bluetooth headset. I can get the headset to pair with my Droid phone, but my Xoom cannot see them. Does anyone have any suggestions? I know the works of bluetooth on the Xoom, I could associate with my laptop and transfer a file from my laptop to my Xoom.

    a old school jabra bt8010s with a blueant M1 and no problem. I would reset your earphons and re-pair.

    I have the 3G model...

  • go to bluetooth and bluetooth headset headphones

    Hi, all, I have a Jabra Bluetooth speaker connected to my PC (Win7 Ultimate X 64), the installed bluetooth module is Intel Wireless AC 7260 over Bluetooth. I see that in 'Her', the bluetooth drivers show the headset Bluetooth and Bluetooth headset. I connect the speaker on my PC, every time I start. But sometimes it is connected to the headset Bluetooth and sometimes headset Bluetooth as described in "sound". Also, the volume of the headphones obviously smaller than the helmet, so I wonder how to pass everyone when necessary.

    see you soon

    Hello Dweng,

    Please keep us updated on the issue.

    Try to connect the same device to any other Windows 7 computer and check if it connects.

    Also, I suggest to contact Jabra support and let us know the status.

    Contact Jabra technical support

    http://www.Jabra.com/ServiceMenu/contact/ContactJabraSupport

    Let us know the State of the question, we will be happy to help you further.

    Thank you.

  • Can I connect the watch or Bluetooth headset at the same time?

    The watch or Bluetooth headset (maybe a pair of the Airpod) connect at the same time?

    I have iPhone 6 now and will update to 7 earlier.

    I do it all the time with my iPhone 6. I assume you mean to plug the headphones into the iPhone, right? Whatever it is, you can connect to the phone or watch.

  • How to use a Bluetooth headset to make phone by Apple Watch call?

    My question:

    my iPhone is on the platform to the floor. I'm in the garden, away from my iPhone, outside of the coverage of bluetooth. However, I'm on my WiFi network so my Apple Watch is connected to my iPhone via WiFi.

    I get a phone call on my iPhone at home and my rings Apple Watch on my wrist in the garden. I answer with the watch, but I would like to continue the conversation by using my bluetooth headsets, which are associated with my Apple Watch...

    Is there a way to do this? As far as I can see, bluetooth headsets can be paired with Apple Watch to listen music stored Apple Watch...

    Tnxs.

    Hello

    It is not possible to use a Bluetooth headset that is associated with Apple Watch in order to pass or receive phone calls.

  • Pairing Bluetooth headset with Apple Watch 2 series?

    Hoping that someone here has some good ideas, so I can avoid having to go through the centre commercial/Apple Store!

    Bought a watch series 2 the day of the launch, immediately tried to pair with the bluetooth headphoens I got (AvierBTE somethings). No luck. Thought maybe I just got bad headphones - but they always associate with my iphone 6 s. bought a pair of Mswift Pow helmet off Amazon and bluetooth headset at the same time borrowed a friend this pair with its original Apple Watch. My Mswifts, or his headphones will pair with my watch, although the two pair with my iphone.

    My watch IS pair with my amazon echo - so I know the bluetooth works.

    The watch is the headset in discovery mode, but when I try to pair, it gives an error and says it cannot associate, check that the camera is turned on, in range, etc..

    Another person had problems of this kind and has managed to find a solution?

    Hello

    Make sure that you follow the instructions for pairing here:

    Use the Bluetooth with your Apple Watch - Apple Support Accessories

    It can help to turn off pairing your headphones for your iPhone (or any other device that they can already be coupled to) before their pairing at your watch.

    It can also help when you try to pair your headset with your watch, to move the two devices to another place, away from any device Bluetooth can be active.

  • IOS error 10 Bluetooth headset

    Hello

    Since I've upgraded to iOS 10 on my iPhone 6, my quick mpow Bluetooth headset does not work as Hey used to. When I turn on, they automatically connect to the iPhone and I get the small icon beside the battery meter indicates the State of charge, however, they do not appear as an audio device in spotify, itunes or other audio applications.

    Only the way to solve it is to "forget the device" and re-pair the helmet - pain in the * when to go to the gym, etc.

    I tried to reset the network settings according to another post on the forum, but there is no reaolve the question.

    Any ideas? She must have iOS 10 as they worked perfectly well until last week and I tried it on my iPod touch 4th generation and they work perfectly.

    Thank you

    I have this problem also with a SoundPeats QY8. I think it's a bug of iOS 10 because he was allowed in the iOS 9.

    In order to obtain the device name displayed for audio playback, one solution is to click on the name of the device under Bluetooth settings after it is already connected, which is a useless chore.

  • AirPlay only list bluetooth headset after the connection

    Hi all

    I wanted to see if it's just me or other people see this. I use iPhone 5 that I've recently updated to iOS10. In my daily use, I connect headphones bluetooth (4.0), MPOW Swift is the brand, to listen to music or watch YouTube videos. With iOS 9.x I never had a problem with the headphones recognized and used by all applications via AirPlay immediately. With iOS 10, which is not true. They connect as I see the icon in the status bar of the phone and Bluetooth settings section says that it is connected but when I go to music app and click on AirPlay they are not listed. I found to solve the problem, I must forget the device to the headphones and then repair and immediately their names still AirPlay and sound comes from the app through the headphones. This is the best though, if I turn the headset off power (disconnect device), then reconnect, I'm back to the same problem where they do not appear in the AirPlay and I pairing again.

    Anyone else see this problem? Unfortunately, I don't have another bluetooth headset to test this.

    Thank you!
    Jeff

    I'm having the same issue. It happens with all my Bluetooth devices. The Bluetooth is connected, as indicated by the icon in the status bar, and the said device. But music, iHeartRadio etc. play via speaker phone. Curiously, the phone works via Bluetooth and the active key Siri is not a problem of Bluetooth.

    I did some research and tried to reset my network settings as recommended without result. Now whenever I turn in a Bluetooth device, I have to connect manually if I want to use it for anything other than the functions of the phone. Very annoying.

    Apple, any suggestions?

  • loss of control ipad (screen magnify in-app Youtube kids) when you use a bluetooth headset

    loss of orders for ipad from tap - specifically screen expand in the Youtube kids application when you use a bluetooth headset

    I would contact with the helmet manufacturer or the helper application developer. Maybe it's that the app may need to be updated.

    Barry

  • Can't associate my Sennheiser Bluetooth headset with my Verstuurd vanaf mijn IPad Pro and IPhone 5 s

    Can't associate my Sennheiser headset to my Verstuurd vanaf mijn Ipad Pro and my IPhone 5s.

    They ore well on my IPhone 4S and the Ipad 2.

    whatncan deceive you?

    to associate a bluetooth headset device that it has not been paired with before putting the headset in discovery / pairing mode your sennheiser manual should describe how you are going to do

  • Notification by email to the phone and not headset/Bluetooth Headset

    I have an iPhone6 and whenever my bluetooth headset is connected, my notifications by e-mail through the headset and not via the phone.  I need to call to keep giving me the notification and send it through the headset.  Often, I have my phone and the headset on my desk and will not hear the notification.  I'm pretty sure I could change this once, but can't remember how.

    Maybe you have active AirPlay? Swipe up from the bottom of the screen to display the command center and ensure AirPlay is disabled.

    How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support

    Also, go to settings > general > accessibility > routing of Audio calls > and set it to automatic.

  • Phone calls via bluetooth headset.

    Can I answer the phone calls on my Apple Watch and hear the caller through my bluetooth headset paired instead of through the loudspeaker of the watch?

    Hello

    No, it is not possible currently.

    If you want to suggest that Apple considers adding that as a new feature, you can do so here:

    https://www.Apple.com/feedback/watch.html

  • iPhone Bluetooth Headset open iBooks?

    So I use my Plantronics Voyager Bluetooth headset for listening to audio books of every night.  My books are in the iBooks app is where I play.

    I'm now noticed something really annoying that I can't fix.

    Now, whenever I connect my Bluetooth headset, it opens the iBooks and starts to read an audio book.  It does this without any prompting from me.  The iBooks app is not really open in this case, it shows just at the bottom of the screen as a bar in the narrow application screen.  It shows also in the Control Center screen.

    There are no settings for my bluetooth headset.  I looked at the settings for the iBooks, and there is nothing about it.  I went through all other screens of settings that I can find and I can't find anything on how to stop this.

    It may not seem like much, but it's really annoying, and when I'm driving and I turn on my headset to answer a call, iBooks automatically begins to play on top of the current phone call.

    I searched and could not find anyone else with this problem, so I don't know if this is specific to my bluetooth earpiece/headset or what, but there must be a way to stop this.

    Any help would be greatly appreciated.

    Thank you

    In fact, I have this problem too, and everything has happened today on my iPhone. However, I do not have a Bluetooth headset; just Sony headphones with a 3.5 mm jack. Whenever I plug my headphones in, the suggested application that could be opened appears iBooks and not music. At first I though it will be fixed by just open music, playing a song and then to pause the selected song. Later, I'll disconnect the Atria, then quickly reconnect. Then, the app suggested turns to music (as I wanted). But the proposed application back to iBooks when headphones are not connected for a long time.

    iPhone 5, iOS 9.3.2,and Sony headphones with 3.5 mm jack

  • You can control volume with bluetooth headset and the new Apple tv?

    Hello community!

    I have a new Apple TV and I'm watching tv and movies series, but the only way I can do it is night. I don't want to disturb my family, so I was wondering if I can watch it with a bluetooth headset and control the volume. What I mean is if I can have a very low volume on the TV but more volume on my headphones. I can do with my PS4, but I have most of my movies in iTunes.

    Thanks for any help you can provide.

    You cannot output audio to the tv and the headphones at the same time if that's what you're asking. However, you will be able to control the volume of the headphones using the distance of Siri.

Maybe you are looking for