Jabra Halo 2 driver not available in Windows 7

Similar Questions

• Error message: the device driver not available and impossible to send files from windows 7 Ultimate x 64 for Sony Xperia phone.

  Hello

  I'm unable to send the file with my laptop running windows 7 Ultimate x 64 on my phone (sony xperia with android os p)

  I can send the file to my phone to laptop and my laptop to another device and any other device for laptop .when I have associated my phone to laptop, I get notification this device driver is not available. my windows is updated and I installed the version lastes my bluetooth of the BT and my laptop even factory plant i tride to update my BT driver automatically from the internet but it doesn't work and I still have this problem please help me how can I solve this problem thank

  Hello

  This error can occur if you do not have an installed device driver or if you have an obsolete device for your Bluetooth device driver

  We can refer to the article and check if it helps.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Try to re - connect the phone and try to install PC companion Sony support and check if it helps.

  PC Companion

  Hope the helps of information.

• Satellite A665-14R - drivers not available for Windows 10

  Hello
  I tried to search Toshiba A665-14R drivers but drivers are not available for Windows 10, if I'm looking for the section Drivers on the toshiba Web site and select my computer model A665-14R then no driver rises, I think toshiba assuming that A665-14R cannot install Windows 10 rather I have 8 GB of RAM & CPU Intel i7 with a 3D graphics card! Its not like my laptop is old and cannot load windows 10, Microsoft has already tested and approved my laptop to window windows installed 10, since I have installed 10 my laptop works fine but I am not able to install TOSHIBA PC Health Monitor, Synaptics Pointing Device Driver, installation of equipment TOSHIBA TOSHIBA value added package Etc Etc

  Its really annoying that I can't scroll down pages because the Synaptics pointing device has no update
  Any help please?
  Thank you

  This model is quite old and has been supported for Win7. I can just say... no luck. A lot of older machines may well work with newer operating systems, but they are not officially supported.

  What should do? Try to check if the drivers, tools and utilities for a newer machine with similar hardware can be used on your laptop Satellite A.

  I had the similar problem in the past with Vista and no supported Win7.

• When I try to open windows store addresses; Windows store is not available on windows to make the workspace

  whenever I try to use the store windows (open) I get this message: "windows store is not available on windows to make working space.

  what I have to do to get it working as I want to be able to download applications

  I have exactly the same problem. The store was working but now I get the message "Windows store is not available on windows to workspace" even if it is installed on a laptop. I checked the system information and everything seems fine (windows 8 pro active) but I have recently changed my HDD and I wonder if this has something to do with it. I cloned the old drive to a new one and I continued from there - do not know how this would happen as I thought it's only the Enterprise version that is able to create windows to readers.

  Tried the method in the post above and resets some security settings, it has not cured the problem. I think that the resolution of the screen is a bit a red herring, as I have already used the store on this machine.

• What is the best feature of mac may offer that is not available in Windows?

  What is the best feature of Mac may offer that is not available in Windows?

  It is almost impossible to answer without going through every single features on both.

  My "Favorites": it has Mac OS - I don't do Windows no matter what flavor (I tried several times and has given rise to a headache each time).

• Personlize parameter is not available in windows 8

  Why my Personlise setting is not available in windows 8 months?

  Original title: problrem about Microsoft

  Try running the following commands from a command prompt (Admin).

  (1) sfc/scannow, reboot and run

  (2) dism / online/cleanup-image /scanhealth to run

  (3) dism / /cleanup - /restorehealth online image restart and run sfc/scannow and restart if necessary.

  Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

  If this has answered your message please mark as answer.

• File | Automate | Action: 'drive not available '.

  Hello

  PS c. 2015.0.1 on my iMac OS X 10.11.4 (el Capitan), I performed an action that ends by saving in a subfolder under the active folder running immediately. When I tried to execute the file. Automate with this action, I received an error message "drive not available '. Tried with the two saving options, "save and close" and "save to [folder location]".

  Could you please show me what can be the cause of this and how to fix it.

  Thank you

  JWC

  The image processor Script can include actions that save you in the treatment of what an action simple single step is all that is necessary for a resolution of the image.

  Image size resample not checked the setting resolution to 72.  Not a single pixel will change the document resolution setting will change from its current location at 72 DPI.

  Canvas size add size or reduce the size of the document canvas.  If it is a background layer its size will change to the new size of the canvas, added canvas areas will have a pixel color adds the and increase in the size of background layers one or the reduction of the background will be cropped to the new pixels size size of the canvas.  A background layer does not support the transparency and its always the size of the size of the canvas to the current document. Other sizes of layer will not change when you change a document canvas size. However the new canvas size can reveal that pixels where the old canvas size cut.

  Your original append said the action was save files to a folder is the folder that is not available or you have to check the batch option to substitute recorded save as steps?

  Hello

  Running PS c. 2015.0.1 on my iMac OS X 10.11.4 (el Capitan), I performed an action that ends by saving in a subfolder

• Envy of HP dv7 - 7323CL: HP driver not available for my laptop after the WIN10, now said to use Windows updates

  I think I got this, just need confirmation, before I was going to HP.com to find udpated pilots, then site Web HP said if computers purchased after August 2013 have been tested, I think you could get the updates via the HP with WIN10 site.  My pc model was purchased in February 2013, it seems now that I have WIN10 there is no drivers for me page to go it says that I need to go to the updates of Windows.  Before I upgraded to 10, I was 8, and I had full access to the drivers download through HP.com page.  However, I think I understand now, I had a problem with the Norton Removal Tool, after using it, it makes my pilot biometric and disabled the Windows Hello to WIN10 - the reader of fingerprints for a connection.  The pilot appeared to be corrupted and I needed to just reinstall.  I finally found an old forum via HP where someone has had the same problem that I did and they are found to include a link for the driver, and it worked for my model of laptop and solved the problem.  After some tests, I uninstalled the driver and learned at that time, after the driver is uninstalled, I can go to Windows Update and it will search and find the driver that I uninstalled and offer me the download to reinstall.  That's cool.  So, I understand now that even now if the drivers are not available for my model via HP.com, I can now just do a search through Windows Update and it will fix the problem, only after that I uninstalled it through Control Panel, Device Manager, once I uninstalled, restarted the computer, then did the updates of Windows It downloaded the driver, like when I went to the Control Panel, Device Manager, I saw the biometric driver in good working condition.  This is the case now with who need driver updates / reinstall?  (Note: to update the drivers, I know too much, you can go to control panel, Manager of devices, and then click the driver and select Update driver software.)

  Hi @MVP1 ,

  Welcome to the Forums of HP Support! I have, I understand that you are concerned about Windows 10 updtaes. I'll be happy to help you.

  You are right.  Microsoft took the drivers for this computer.  All updates will now come from Microsoft.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Realtek driver update not available for Windows XP on Vista B4 upgrade to Windows 7

  Hi all I set up my cell phone before installing Windows 7.  The compatibility check says I need to download the latest driver for Realtek RTL8139/810xFamily Fast Ethernet Realtek Semiconductor NIC and before reinstalling after installing Windows 7.  However, when I tried to do this Realtek said it is not available. Any advice on what to do? If I install Windows 7 I'll be without driver, really worried then. Thank you in advance, really need help. Thank you in advance, Ros

  If the manufacturer of the hardware does not support the operating system to use, the only possibilities are driver compatibility mode Setup, hope that works of an integrated 'generic' or replace such hardware with something that is supported on the operating system, that you choose to run by the manufacturer of said material.

• HARD drive not recognized by Windows Vista Home Edition (32-bit with Service Pack 2)

  Windows stopped to recognize external 500 GB drive external HARD on my Ascer Aspire 5610Z attached via the USB port.  Have tried two USB ports, but won't recognize the device.  Seeing of the device lights up and the device can be played on another laptop.  OK worked until a week or two ago, but cannot restore because it's on this unit that the backups are done!   Windows is 'unknown material' and trying to find the driver, without success.   Device Manager reflects an unknown device but gives no description, etc.

  Hi Peter St Clair,.

  1. did you of recent changes on the computer?

  2 are you able to access other USB devices on the computer?

  Method 1

  See the link below and run them the fixit tool available, check if it works.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

   

  Also, check if the drive is detected and letter drive affected by the management of the disks on the computer.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 2

  If the previous step fails, then I suggest you reinstall the USB controllers on the computer and check if it works.

  Note: If you use a USB mouse, please follow the steps of "Using the keyboard" to reinstall the USB controllers. Windows 7 will reinstall all the controllers automatically after restarting your computer.

  Use the mouse

  --------------

  First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type 'Device Manager' (without the quotes) in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows Vista will automatically reinstall all USB controllers.

  Use the keyboard

  -----------------

  First of all, please disconnect all USB devices. Then go through the following steps:

  (a) press "Ctrl + Esc" to open the Start Menu.

  (b) Device Manager to type in the search bar and press "Enter." If necessary, click on continue.

  (c) in the Device Manager, press Tab and use 'Up' and 'Down' to move the selection from 'de Bus USB controllers '.

  (d) press 'Right' and expand it.

  (e) press 'Down' to move to the first item, and then press "Delete" to delete.

  (f) repeat step 5 and uninstall everything under 'controllers of Bus USB '.

  I hope this helps!

  Halima S - Microsoft technical support.

• HP ProBook s 4540: driver not found during installation: hard drive not available

  I have a problem during a reinstallation of Windows 8 64-bit: the hard drive is not available.
  I use an original dvd of this pc.
  I tried to load the driver of everything but nothing to do.

  message from Windows:

  "We have found all the disks. "For a storage driver, click on load a driver.

  Do you have any suggestions? What are the drivers I need to download to install 8 64-bit windows?

  Thank you very much

  Hello mrk12,

  Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  Good luck!

• a default gateway is not available in windows 7

  G ' Day,.

  Although Windows 7 works and looks good, there is a major problem which threatens to derail the whole experience for me.

  Several times a day, the default gateway becomes unavailable, which means that the PC running Windows 7 loses internet connectivity. At the same time, other PC, running Vista, continue to operate normally. It is a PC with a WiFi connection and another that is normally connected.

  Here are the details of my network controllers (are there two).

  ... Description: NVIDIA nForce Networking Controller
  Reference of the manufacturer.... : NVIDIA
  Provider of...: Microsoft
  Version...: 1.0.1.211
  INF file name... . : C:\Windows\INF\netnvm32.inf
  Date of the INF.... April 22, 2009 12:47:44 AM
  Name of the section.... : NVENET55. NDI
  Hardware... ID: pci\ven_10de & dev_0373
  Instance... state flags: 0x180200a
  Status code of Device Manager. . : 0
  IfType  . . . . . . . . . . . . : 6
  Type of physical support...: 14

  The problem is solved by manually fix the problem when Windows 7 detects that the default gateway is not available to the general public and resets the network 2 controller.

  I saw that this isn't an isolated fact with several reports on the net, some suggesting that a different driver may help, but which? Any suggestions?

  It is one of many known issues nVidia Windows 7 nVidia should fix, unfortuniately Microsoft has nothing to do with it. I'm sugguest that you contact nVidia for assistance. Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• A satellite - DVD Drive not seen by Windows Explorer

  The DVD on D deive is not seen by windows Explorer. Used to work, it has now disappeared. The dvd hardwars starts at the start, then stop.

  Any ideas anyone?

  Hello

  You see the DVD drive in Device Manager and you then yellow exclamation points?
  Maybe you should just remove the drive from Device Manager and reboot the laptop. Select the drive in the Device Manager, right-click on it and choose uninstall. Then, restart the laptop.

  If it doesn't work try the workaround posted by Akuma to remove upper and lower filters.

  Good bye

• Why standard - spider & freecell games not available in Windows 7?

  New computer and new installation of Windows 7. Freecell and spider are not available. Why not?

  They are, you might just enable them.

  Press the windows key or the button at the bottom left and type in 'characteristics '. Then click on 'functionality in windows or turn off. From there, develop games with the button "+" next to him and put a check mark next to the game you want and press OK. Games must appear in the Games folder in the start menu and in the Games Explorer. Good luck.

• CD/DVD drive not recognized by Windows all of a sudden

  The opitical drive had been used with problem. I removed a couple of days and when I came back it is no longer listed in "MY Computer". Put everything in the disc drive is not recognized. The drive does not appear on the list th of the material system. The drive has power since it extends and retracts. He tries (the light) to play the disc but stops.

  Hi Ranamaska,

  You can follow this link & check if the problem persists:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows?

  Hope the helps of information.