JAI AD-080GE

Similar Questions

• Clipping of image using Imaq1411 and Pulnix/JAI TM72-EX

  I use several Pulnix/JAI TM72-EX cameras with NI Imaq 1411 maps to several test stations,
  and all stations have the same problem. The resolution of the camera is supposed to
  or 768 x 493 758 x 581, according to mode. I'm a dead beyond zone about
  640 pixels in the horizontal axis, as shown in the images attached. The images were seized of
  custom software, but NEITHER measure explore shows the same dead zone.

  We use the camera in mode FRM with MGC. Why are we not
  get the full 758 and 768 pixels?

  Thanks, JerryKR
  
  

  Jerry,

  It is a problem with analog cameras.  The camera pixel resolution is not always granted pixels of resolution.  The camera may have 'skinny' pixels, while the capture card reads square pixels.  Your camera uses 758 pixels to generate an analogue waveform that is sent to the capture card.  Card acquisition scans the same waveform in 640 pixels.  If you set your pixel clock, you could get more pixels out of the waveform.

  Bruce

• IMAQdx timeout with camera JAI multicast

  We have a JAI camera connected to a GigE card, displaying the image in a LabVIEW program, and it has worked reliably for months.  We would now like to save the image for short periods of time as well.  We have added a second computer on the GigE network to capture and save the image with a dedicated software stream.  We put the camera JAI multicast so that both computers receive the same image.  Now, we're getting timeout errors in the LabVIEW program: error-1074360293 to IMAQdx to Image.vi.  Increase the length of the timeout to 10 seconds (default is 5) has not helped.  No idea why IMAQdx does not multicast, but works correctly in unicast?  Y at - it a setting I missed?

  Hi nathand.

  It seems IMAQdx 3.9 added a bug that will leave multicast mode not working correctly (the camera is silently configured for unicast in some cases mode - Interior CAR # 318906). Can you confirm if you use this version, or if you use an earlier version? If you say it works for a little while but fails, I guess it's _not_ this bug.

  Do you know what type of switch you use between the camera and the two PC? If it is a managed switch he may use IGMP snooping to determine which of your interfaces is listening for multicast addresses. It is possible that a bug in implementation of this Protocol switch can cause the association to give up after a while. You may disable this Snooping and either assign manually multicast addresses are transmitted or move it to all ports.

  Eric

• I lost my system vista jai a key buy

  Excuse me pay the disturbance but jai EU a problem I have lost my original vista which was preinstallateur on my laptop and when I go to the store they told me that I should buy a new edition and a new key

  What should I do

  Thanks in advance

  I HAVE always my original license key

  Hi AntoonB,

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• The compatibility of Applications programs when I want Bitdefender 2013 charger, ' jai windows seven 64-bit could you help me thanks Frank

  So I bought the latest version of Bitdefender total security 2013 when I want Bitdefender charger it me appears when the files are installed in a rectangle bdagent.exe 0xc000007b application, I can't used my antivirus, ' jai windows seven 64-bit could you help me thanks Frank

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Good day

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

  Thank you
  
  http://answers.Microsoft.com/fr-FR/windowslive/Forum?tab=unanswered
  http://support.Microsoft.com/common/international.aspx

• Microsoft's JAI forget my word past Windows

  I HAVE forgotten my Windows password I pe pa access a laptop of LUN

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Good day

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

  Thank you
  
  http://support.Microsoft.com/common/international.aspx

• Firefox will not close on the Mac laptop

  I had a problem and started a mysterious cleaning profile process if I remember (hours). He put a former folder Firefox data on screen then brassèrent away for so long that I interrupted him, then download a fresh copy of FF, tried to run it, but get the message "Profile missing etc.

  No menu, and I'm stuck. When I try to close/delete FF in the trash, he refuses because it is open.
  No profile is displayed when I search the library including hidden items.
  None of the solutions as stick a Kill command in the Terminal seen elsewhere works.

  Thanks Jaya.

  I gave up last night, but had one last go before before dispatch in Mac and Firefox the depths of hell.

  'Force Quit' didn't work, so I tried to copy what looked like a profile in "Old Firefox data" folder on the desktop in the folder/Library/Application Support / Firefox / Profiles.

  There was another profile folder there that I renamed it "Old etc.", then I started Firefox... and it worked!

  So I do not know if your suggestions later would have worked, but thanks a lot to them.

  Concerning
  George

• How to install Win XP on Qosmio G20 using USB flash memory key

  Dear Admin,

  This is regarding my laptop Qosmio G20.

  Last month my OS (windows XP media edition) has been corrupted so I attempt to reformat and reinstall the operating system.

  But unfortunately my CD/DVD-Rom does not work/play,.

  Then I try to install it via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  plezz help me install XP or Vista or 7 those who works there...

  plezzz plezzz sound my laptop preferred

  Thanks in advance

  JAI

  > Then I try to install via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Connect the USB flash memory key to the laptop, now switch on and press F12.
  The start menu should appear where you could see all the possible boot devices.

  Do you see the USB boot option in the start menu?
  If this isn't the case, then you will not be able to boot from USB flash memory.

  > Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  I guess that this is because the RAID drivers was not included!
  Qosmio G20 supports the RAID controller and you add the RAID driver (located on the Toshiba UE driver page) in order to recognize the HARD drive.
  But I put t know if you could do so using another computer I guess that's not possible.

  Maybe you can try to disable RAID in BIOS

• M30X-105 - my DVD-RAM can't see CD - R.

  Hi all

  Yesterday, I bought a Toshiba Satellite M30X 105. Everything is ok, aside from the fact that Mat * a DVD - RAM UJ-820 s refuses to read one of my CD - R is recorded on another machine with Nero 6.6.xx

  Can someone everything I say on what settings can I change to enable DVD-RAM see all CD?

  HI JAI,

  What type of CD writer is in the other machine?

  He is also an older CD burner or a DVD burner?

  Pete Bye

• HP Pavilion Notebook PC g6: IDT Audio PC stopped working

  Hello

  A few days ago I upgraded my Version of the OS of Windows 8 for Windows 10, now the question is the dolby sound system broke down.

  from the pc speaker sounds are too loud, I tried to display dolby at default settings but his error showing that "IDT PC Audio stopped working".

  Please suggest me the way to shortout this, thanks in advance.

  Here are the full details on my PC OS:

  Name of the operating system Microsoft Windows 10 unilingual home
  Version 10.0.10586 Build 10586
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the KAMLESHJHAPC system
  System manufacturer Hewlett-Packard
  HP Pavilion Notebook PC g6 model system
  System Type x 64-based PC
  SKU C9L68PA #ACJ system
  Processor Intel Core i3 - 3110M CPU @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.25, 29/05/2013
  SMBIOS Version 2.7
  Embedded Controller Version 56.50
  UEFI BIOS mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  Start secure State
  PCR7 Configuration not available
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.10586.0".
  KAMLESHJHAPC\windows user name
  The time zone India standard time
  Physical memory (RAM) installed 4.00 GB
  3.89 GB total physical memory
  1.07 GB available physical memory
  4.89 GB total virtual memory
  1.18 GB virtual memory
  Page file space 1.00 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - Data Execution Protection formerly name Microsoft Windows 10 single Home Language
  Version 10.0.10586 Build 10586
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the KAMLESHJHAPC system
  System manufacturer Hewlett-Packard
  HP Pavilion Notebook PC g6 model system
  System Type x 64-based PC
  SKU C9L68PA #ACJ system
  Processor Intel Core i3 - 3110M CPU @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.25, 29/05/2013
  SMBIOS Version 2.7
  Embedded Controller Version 56.50
  UEFI BIOS mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  Start secure State
  PCR7 Configuration not available
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.10586.0".
  KAMLESHJHAPC\windows user name
  The time zone India standard time
  Physical memory (RAM) installed 4.00 GB
  3.89 GB total physical memory
  1.07 GB available physical memory
  4.89 GB total virtual memory
  1.18 GB virtual memory
  Page file space 1.00 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  JAI KAMLESH
  

  Hello:

  Have you tried the W8.1 audio driver?  If this is not the case, see if it works.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp59649.exe

  Or try this one...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• Pavilion e015dx: Cool HP feel for Windows 10-64 bit

  Hi all

  I recently upgrded my Windows 10 operating system - 64 bit. As such, I searched HP software Cool sense for Windows 10 but could not found so.

  Can someone please help? I found a link for the download. But installation stopped between asking for some .NET framework. I downloaded the .NET framework, but while it is installed, he threw a pop up saying that my PC had a newer version.

  Kindly convey meaning Cool HP can be used on Windows 10. I used this software on Windows 8.

  Thanking you!

  Kind regards

  JAI

  Hello:

  See if this version for W10 works for you...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_153537_1

• Re: Satellite A200-1 t 0 - the fan noise & purchase spare fan & replacement

  Hello

  My Satellite A200-1 t 0 made noise bad uncomfortable even on cold start.
  I tried to clean up the use of household vacuum without removing cabinets, always, she improved marginally.

  What I need to replace the cooling fan?
  I looked on the internet I couldn't find out where to buy the replacement cooling fan.
  I found a link as below, but it is mentioned that for AMD processor but mine in Intel Core 2 Duo.
  http://www.Amazon.co.UK/Toshiba-Satellite-A200-1To-compatible-processors/DP/B005TTJ62U
  Not sure if it would be compatible.

  I'll be able to buy this Toshiba?

  Please kindly advice how to solve this problem of fan noise.

  Thank you
  Jay
  [email protected]

  Hello Jay

  Satellite A200 is old model of laptop, and I can imagine that the fan cooling and air conditioning grill are full of dust.
  Before changing anything your laptop must be completely disassembled and cleaned. I did this several times in the past and I must say that my books were much quieter than before. After the cooling system will work properly and laptop will be able to take a breath.

  I put t know if you know someone who can help you with this. Please don't spend your money for new parts. At a first professional portable make cleaning.

  Please send comments.

• Problem of Orientation/gyroscope/accelerometer sensor Lenovo S920

  I just bought this phone and the learning function. somehow, I turned on the line on video beginning taking n video n found the problem of sensor of course. The line level is right, that if I want the oblique phone and found no app Setup to calibrate it.

  Measures:-went to the place I bought and staff restore factory default and the said device issue. It's 4 days phone and and it refuses to do the replacement. DAMmN, ITS MY HARD EARNING of MONEY AND I NEED a replacement.

  Lenovo Partner store where I bought:

  Amber Channel Trading Sdn Bhd

  Digital Mall, Section 14, Petaling Jaya.

  If it can be calibrated by App, you can recommend me to settle this YOUNG. I can't take the video using the level line and I CANTeven play a racing game, when I take the S920 is right, the car's side.

  If it's a device problem, I WANT a PHONE's REPLACEMENT IMMEDIATELY.

  NEED A SOLUTION IMMEDIATELY.

  Hello

  You can try if your detector is working correctly.

  Maybe just download this app from Google Playstore.

  https://play.Google.com/store/apps/details?ID=imoblife.androidsensorbox&hl=en

  and then check your sensor. If you still see a problem, you can seek redress.

  You must contact the store where you bought you phone.

  Best regards

  J.

• Pulnix RM-6740GE error 0xBFF69012

  Hello,
  
  I'm trying to use a Pulnix RM-6740GE, dated 6/10/09 with LabVIEW.  LabVIEW is
  having trouble interfacing with the camera.  I try to view an image
  through NI-MAX first and it returns a error 0xBFF69012 - attribute out of
  range.  The camera works find with the JAI tool software so I believe its
  not an ethernet interface problem.  Can you shed any light on what may be
  causing the problem?
  
  Thanks,
  Bruce Barnes
  Coherent Applications Inc.
  

  I found and corrected the problem.  I noticed that my NOR-IMAQ and NOR-IMAQdx versions were not the current versions, so I've updated them.  Then I deleted the files .iid and .icd for the camera.  I cycled the power on the camera, OR launched-MAX and the camera worked fine.  I then continued my vi and the preformed perfectly camera!

  Thank you

  Bruce

• Driver for the Atheros QCWB335 Qualcomm model

  Hello

  I just bought a 15-D002TX HP laptop and I installed windows 8.1 (64-bit) on this subject.

  My WiFi adapter is qualcomm atheros QCWB335.

  I need the link to download the driver for wireless lan and bluetooth.

  Hello Jayit, welcome to the Forums of HP.

  I see you have installed Win 8.1 on your laptop and find the bluetooth and network drivers.

  Here are the links for the drivers that you have requested.

  Series of QCA9000 of Qualcomm, Atheros Wireless LAN Driver for Microsoft Windows
  Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS Driver for Microsoft Windows

  These are the drivers that arise for your product on this page, they should work. Let me know if they do not.

  Thanks for posting on the HP Forums.