Pulnix RM-6740GE error 0xBFF69012

Similar Questions

• "Error 0xBFF69012 attribute value is out of range" for Point Grey Grasshopper2 GS2-GE-50S5M

  Try to get the camera above to work at MAX. Running on LabView 2010 SP1 with Vision Acquisition software August 2010.

  Errors illustrated: error 0xBFF69012 attribute value is out of range

  Camera works perfectly well on the supplied software advanced Grey. Point Grey Image Filter Driver installed. Turned off the Windows Firewall. Card (http://www.sonnettech.com/product/prestogigproec34.html) Ethernet supports Jumbo Frame.

  Read through the following measures without result:

  http://digital.NI.com/public.nsf/allkb/FCE7506A3AF7636C862576240072716D

  http://digital.NI.com/public.nsf/allkb/A0A1CE4704265BF2862578CA007A4CF8

  How will I know if there is a problem with the XML file?

  What are the possibilities that this device is not compatible with IMAQdx?

  Thank you.

  Problem solved in new firmware version 1.25.3 - 00.

  Contact Gray Point to this firmware.

• Pulnix TM-6740GE camera

  Is supported this camera Pulnix TM-6740GE camera

  Thank you

  Chris B thanks for the link and info, enjoy it...

  Robert, we already request a quote from another supplier and intend to buy it, I just want to do is compatible before buying it and thanks for the info and the offer...

  Riscoh

• Prosilica GigE GC650C error 0xBFF69012 attribute value is out of range

  Hi all

  I had been using a GigE Prosilica GC650 of camera on a target real time with no problems. Today I tried to connect the camera to the MAX and I get the above error. I have read every thread I could find about this error and have tried the following with no luck...

  -Deletion of files xml, iid and CIM with the camera disconnected and non-powered

  -Update the firmware of the device to 1.36

  -Repair OR-IMAQ 4.3 installation

  -OR-IMAQdx 3.4 repair facility

  The Prosilica camera viewer works very well. Another oddity, it's the same device works fine in the same version of MAX on another computer with hardware counterpart. This computer has versions of the same software (Labview 2009, IMAQ, etc.) to the problem machine.

  I have not installed software or updated between the time when the camera was working and now (about 1 week).

  Any ideas would be greatly appreciated!

  Chris

  Hi Chris,

  The only thing I can think of is to check the link speed. I think that some of the attributes on the Prosilicas go out of range, when they are connected to 100Mbit instead of 1 Gbit. Check that the interface of the camera card and the network show a gigabit link. Maybe you have a bad cable which is originally the link down to speed.

  If this does not help, let me know and I can try suggesting other things we can try.

  Eric

• Error 'ChunkSelector' of IMAQ 0xBFF69012 Max

  I have a camera GigE simuliid Gray Point I try to access it via NI MAX and then LabVIEW.

  The camera itself seems to work fine - I can get a stream of image in the native software of Point Grey. When I try to run it in MAX however, I get the error shown in the image below.

  I'm not familiar with this particular error, so I don't know what settings I need to play with to get the value in the range.

  Anyone else seen this error before?

  C IMAW

  I know that it is almost a year that I answer this question, but I thought I would add a definitive answer to this question for all those who may need it in the future.  I just started working with a camera Point Grey flies and found this error as soon as I ran it in NOR-Max and using the IMAQ-dx drivers.  Point Grey doesn't have a more recent version of the firmware to fix this problem, so it must be done in the NOT-Max as another thought of the poster.  The fix because it is opening the NOT-MAX device, go to "attributes of the camera", got to 'Chunk Data Control' and select one of the attributes.  I chose Timestamp Image but everything should work.  The field is not populated by default which is probably why the error is thrown.  Once it is changed, the 'Save' icon will become selectable and you must save so that the change is complete.  The image below should help you find the place where to make the changes,

  Thomas

  

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• SUMIF error

  I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

  In cell F1

  = E1/if(E1>0, 20, 1)

  fill down as needed

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• Display Rotation error

  Hello

  I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

  I wanted to know if there is a lasting solution to this problem.

  I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

  Hello PavanGJ,

  Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

  Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

  OS X El Capitan: If you have problems with startup items

  You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

  You can also test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

  Let us know if that helps.

  Take care!

• A fact error 4014 showing each time after all the steps

  One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).

  I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?

  Thank you for your help and appreciate it.

  I found the solution. Just type here for others with the same problem to solve their problems.

  While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.

  Thank you for your support and more.

• Playgrounds are learning to code 1 download error

  I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift.  Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL.  I uninstalled and reinstalled the soft playgrounds several times.  Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well.  How can I bypass or fix this error and get the first playground of lesson?

  

  Finally, the playing field is downloaded successfully!

• Error Java Run After downloading the new Sierra

  

  Java is up to date and I get this error message. A couple of times, I have "updated" restarted. Still happens.

  Hi cjshrad,

  Thank you for contributing to the communities of Apple Support. I see in your message you receive a Java error after upgrade to Sierra on your Mac. I'd be happy to help with this!

  First of all, try to install the Java for OS X package found here:

  Download Java for OS X 2015-001

  The next step, if you still see this error, I recommend that you completely uninstall Java from your Mac by following the steps listed here:

  How to uninstall Java on my Mac?

  Once you're done, use this link to download and install the latest version of Java for your Mac:
  Download Java for your Mac - Apple Support

  Take care!

• "error recovery main area".

  Hello

  I can not access my old video files of my 6 16 GB iPhone, I'm using iOS 10.  When I try to open the videos that I always meet the message 'area main-fetching error' I can't specify when this problem started, but I'm sure it was good when I was with iOS 9.3.3 However, recently filmed videos works perfectly.

  Same thing here. I bought the new iphone and took the backup from your old phone, but the videos do not work.

• App Store connection error

  Am having a problem of signing in the App Store and iCloud on Preferences system on my MacBook Pro, getting an error response whenever I tried signing in.

  Here are the errors:

  

  

  1. Are you sure that you typed your password correctly 100%? (sry, but that would be classic
  2. have you tried to reset your password?