Tecra M1 and slow CPU

Similar Questions

• screen goes black and I hear 3 beeps slow cpu.

  A few minutes after turning on the power button on the computer, my screen goes black and I hear 3 beeps slow cpu.  It makes me have to hold in the power button to turn off the computer and restart.  This happens as regularly after I've been on the computer for awhile.  What is causing the black screen and beeps?

  Hello

  You normally get beeps and it does not start.

  You will need to go to your computer manufacturer's website and find out what BIOS you have in your computer model.

  Then check in these links 'beep' error codes know what hardware has problems.

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.computerhope.com/beep.htm

  See you soon.

• MsMpEng.exe running non-stop using 100% CPU and slow my computer down makes it difficult to use

  MsMp Eng.exe running non stop using 100% of cpu and slow my computer down makes it difficult to use, I just need a way to disable this program

  Hello Ian,

  Have you tried the Task Manager to end? Right-click on the taskbar and select Start Task Manager. Locate the application and click on end task (at the bottom of the page). I wonder if it's a piece of malware running, or even a virus. If it will not be closed, or starts just backup again, consider using these scanners:

  Malwarebytes': http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html .

  SuperAntiSpyware: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html .

  ESET Online Scanner: http://www.eset.com/us/online-scanner/ .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• Windows 7 has high CPU usage and slow performance. Tried all the tips. no solution

  After trying tons of advice in the forums without solution, I downloaded Process Explorer and discovered that 3 process is look after my CPU and slow down the computer:
  System 48-52%
  Interrupts the 21-23%
  System idle process 14-16%
  What should I do next?

  After trying tons of advice in the forums without solution, I downloaded Process Explorer and discovered that 3 process is look after my CPU and slow down the computer:
  System 48-52%
  Interrupts the 21-23%
  System idle process 14-16%
  What should I do next?

  Yes you can do you can disable these 3 processes which is occupy you cpu and you can check that performance in safe mode too
  http://www.technology-HOWTO.com/2011/07/disable-programs-that-run-when-we-start.html

• Difference between Tecra M10 and Tecra A10

  Dear forum
  The above says everything really.

  I see the two look identical, but one is smaller. These two models are different in other ways please.
  Ian

  Of course, the two laptops are different.
  There are different models Tecra A10 and there are different units Tecra M10.

  For example:
  Tecra * A10-13 b * supports Intel GM45 chipset and an Intel Core 2 Duo P8400 2.26 GHz CPU.

  Tecra * A10 - 1 2 * supports an Intel Core 2 Duo T9600 2.80 Ghz CPU Intel GM45 chipset

  You can find details of different laptop models left here:
  http://www.Toshiba.EU/discontinued-products/
  Then, you can compare all the pieces of hardware.

• computer laptop HP compaq 6730 b freezes and slows down

  I have a laptop hp compaq 6730 b.

  Since a few days, I realized when I plug to charge my cell phone, it freezes finally and slows down.

  The CPU usage suddenly increases.

  What should I do?

  help please...

  Thank you

  It works ok with only the power adapter is plugged in and the battery out of the laptop? The battery charge ok if the laptop is turned off? The laptop works for a long time reasonable with just the battery?  I've seen this kind of problem with a Toshiba machine that used a NEC/CATHERINE 0E128 Proadlizer high switching frequency DC/DC Converter output capacitor.  I doubt that your computer has this chip but the problem and the function are similar.  It is a device surface and can cause the laptop to have a problem with the battery and the power adapter plugged in at the same time.  Many times this you will also charge the battery when the computer is turned off, but not when it is turned on. Sometimes it will not allow your to run Notepad with only the attached power adapter and the battery removed. Just to think.

• System runs slowly, and my CPU usage is very high.

  High CPU usage

  My cpu is in every sense. from 12 to 100 and slow

  Hi linda lyster,.

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  ·         What is the number and the model of the computer?

  Check in the Task Manager , which process is toll until the CPU usage.

  Follow the steps.

  Method 1: Run the troubleshooter of performance.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  For reference:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

• PowerShell has stopped the work and high CPU usage

  My laptop recently started to operate erratic, slow, very slow start as well as general use... even the cursor was glitch.

  A recurring error is "powershell has stopped working".  and "the security will not allow this download."

  I did a defrag and clean the c drive... I'm not very tech savvy, so I took it to Geek Squad, who said that they could not recreate the problems.

  They made an optimization, malware, cleaned and changed the browser...

  I opened the monitor cpu and the cpu running very high, sometimes 100%, and the laptop gets hot, even though I have a cooler under him.   If I disable the internet CPU breaks down... when I turn on the internet that it goes back immediately.   It all started around November 15 and I have no idea why.

  I am running windows 7 and have a HP Pavilion quad core with 6 GB.

  When I ran spybot there any spy software, but a huge amount of temporary files.

  The Geek Squad said it was a virus, but they had cleaned up a bit of malware.

  I have no idea what to do now?

  Hello

  Open the event viewer > application log

  Look for errors related to Power Shell

  Run the System File Checker

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Related topic:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/getting-Windows-PowerShell-has-stopped-working/88d50fd7-aaf4-4d4a-8ed4-27e9dfab8ee9

  You have KB2952664 installed in Windows Updates?  Try to uninstall in order to determine whether it can contribute to the issue.

• I bought 50 weeks to Go on my iphone and my cpu it always says I'll run out and have only the 5 GB, I had originally. They are the same accounts and idea how to fix?

  I bought 50 weeks to Go on my iphone and my cpu it always says I'll run out and have only the 5 GB, I had originally. They are the same accounts and idea how to fix?

  Have you tried signing off iCloud desktop and then signing again? If you check on the phone, does show the plan 50 GB? Are you sure that the two devices are signed on the same iCloud account?

• Tecra A4 and Win7 - problems with PCMCIA card driver

  I've recently updated my old laptop Tecra A4 - PTA42E - (in great condition however) for Windows 7 and it is now in the best shape ever except for the PCMCIA card. In fact, to have Windows 7 installed I had to rename the pcmcia.sys and pcmcia.inf files during the installation (to .old or .bak) otherwise the new operating system would not start. The same problem has been experienced by many other users Tecra A4 and the solution is available in a number of forums.

  Although I use no more than the PCMCIA card slot, I want to fix this for a reason: If, in the future, I need to re - install Windows 7 for some reason any on this laptop, I have to repeat the same process - rename the pcmcia.sys and pcmcia.inf during installation, in addition, the new operating system does not start.

  I do not understand that the original drivers from the card slot (Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7, but it is there any updated driver that works for windows 7? And if there's a how can I replace the old drivers in my system so that in the event of re - install Windows 7 I will not have to go through the same process? TI site is no help, and Toshiba does not all drivers to download.

  Last but not least, if there is a driver available, I used the card slot for 2 ports USB 2 or 3 additional which are really necessary.

  Thanks to the forum, in advance

  Hello

  The pcmcia.sys and pcmcia.inf files are part of the Windows System.
  This driver isn't provided by laptop manufacturer, but it is a Microsoft internal driver.

  You mentioned that the pilots of the original card slot Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7.

  To my knowledge, this driver does control not the PCMCIA location but this driver controls the card reader that supports the MMC card, SD card, card xd picture card, SM card, Memory Stick and Memory Stick Pro.

  However, the Tecra A4 is very old model of laptop. The driver will not be updated for this camera and it looks like Windows 7 drivers never had to be released the driver Toshiba UE

• Tecra M9 and compitable motherboards

  Good day to all
  My Toshiba laptop Tecra M9 PTM91E - 12R features of a faulty video card.
  I replaced this card many times, but it's always get bad after a while.
  My repair shop of my recommended to replace its motherboard in order to get a solution permanent.

  I'm not sure if I am looking for motherboards Compitable with my product

  Can someone tell me please with PART NUMBERS of SPECIFICATIONS AND motherboards that I can buy?

  Thanks in advance for your support

  > Any can advise me please with PART NUMBERS, specifications AND motherboards that I can buy?
  Hmmmm... It is not as easy as you think. Defective parts will be exchanged on mobile units with only identical hardware components. It's a completely different situation than on desktop systems.

  You can visit the nearest Toshiba service provider and ask for help, but you will see that they will not be able to help you.
  Fact is that Tecra M9 was offered with two hardware platforms. PTM90E and your PTM91E.

  In the end, I must say it's really strange that you have an ongoing problem with GPU defective. When everything is changed on professional way and you take care of the machine and don't forget laptop is cooled properly I don t see the reason why it should be defective over and over again.

  For 3 years I have Tecra A11 and use almost every day for my small business and there is no problem at all. OK I use for typical every day activities such as web or MS Office and not for games or other graphics intensive applications.

  Try to contact Toshiba service provider in your country and ask for advice. They should have access to the material database of Toshiba and maybe they have good advice for you.

  If possible, send feedback.

• Satellite U200 getting more slower and slower - 5 minutes to stop

  My U200 becomes slower and slower - 5 minutes to stop! and now it crashes when I try to install the drivers for "Cakewalk Sonar THE"- so I need help.

  I think I need to re - install Windows XP, however, I only got a "recovery disc" with the laptop - which will reformat my hard drive - there no way to reinstall xp without reformatting?

  If I have to reformat-how can I recover my Express Media Player & Norton Protection? -(I bought the laptop in January this year)

  HM, I think that you won´t get around this recovery thing, because I think your system may be heavy software problems.

  Regarding the Media Player and Norton: were they not installed as you bought this machine?

  Welcome them

• No sound with Tecra A9 and Windows 7

  Hello

  I just installed Windows 7 on my Tecra A9 and now: no sound. I ' v installed all the latest drivers but nothing to do: no sound.
  Does anyone have the same problem? And especially have solved?

  Thanks for your help.

  PS: The mute off the coast of the working tools doesn't work with Tecra A9 (is there an update?)

  Hello

  > I've tried the mute off tool, but it is not compatible with Tecra A9
  You need to install the VAP (Toshiba Value Package utility added) before using this tool!

  Check again!

• Tecra M9 and M10 wheel Volume does not not under Vista

  Hello

  I hope that someone can help me, I'm Vista using Microsoft Deployment Workbench deployment for Tecra M9 and M10 material and the volume knob will not work. I added the drivers of Toshiba in Deployment Workbench, while they are presented the machines via Plug n Play, volume button do not work. I also deleted the drivers of Deployment Workbench and installed the drivers manually on the machines, this installs fine, but volume knob will not work. I have two development servers, Win Server 2003 and Win Server 2008, the two do not run successfully the pilot slots.

  If I deploy a standard Win Vista Enterrprise 32 bit OS of DVD hardware, with any driver when it is installed, the volume wheel works. I can then manually install the audio driver and the volume button still works. But if I deploy the same exact DVD based OS of Deployment Workbench, the volume knob does not work?

  Any help would be greatly appreciated, as this is doing my head and holding up the deployment of the new image.

  Thank you
  Paul

  Maybe you are trying to install the driver Audio of M9 M10 or vice versa?

  You install the driver Chipset Intel and value-added package first? (this is important)

• Re: Tecra S10 and S11 freeze randomly

  We have several Tecra S10 and S11. Freezing randomly during the day. Some even twice within half an hour, others spread it throughout the day.

  The Tecra is all Windows 7. Some have 64 bit, others a 32-bit installation. After installation of Windows 7, we have removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc.), Ebay, etc. After that we activatie Office 2007 and Microsoft put updated laptops. So far so good.

  However, after a week or two just work in Word causes the Tecra to freeze. Same ctrl + alt + delete does not work. The Tecra should be forced to turn off the power, press and hold the power button.

  Everyone recognizes these "frozen moments". It's very annoying.

  It is not easy to say why this is happening.
  Always it is that Office is preinstalled on almost all laptops Toshiba so I did not thing your laptops can be somewhat different.

  Maybe something else responsible for this?
  Maybe are all connected to your business LAN and there is a problem.
  Are connected external devices which can be responsible for this?
  Maybe some internal software of the company is blocking something.

  It is not easy to say what he can be.

  Have you done tests in the past to see what can be the problem?