Java applications can write to the event log

Similar Questions

• Ban the event log writing apps

  Hello.

  Question, maybe it's stupid, but...

  Is it possible to prevent or isolate applications write in the journal of the events of thinapped?

  Usually thinapped application generates a lot of 'warnings' and 'mistakes' in the event log

  but works very well. Event log becomes a dumping ground.

  Perhaps, someday, developers create Package.ini parameter to do this.

  Edit: by wila moved to VMware Workstation for VMware ThinApp: Discussion Board

  It's for sure you cannot prohibit the application to write to the event log.

• Understand the the event logs on BlackBerry

  Hello

  I was looking through the event logs on my blackberry handset (combination of keys by pressing ALT + L G L G) but I'm unable to correctly understand newspapers. Is there a documentation concerning the registration of events?

  Actually I want to determine the type of network connection (TCP - IP / BIS / BES / WAP / WiFi) made by the running application by looking at the event logs!

  Thanks in advance...

  Pulkit

  Switch Min Log of the event log level to Debug Info. TCP connection attempts will be registered as net.rim.tcp - open-tcpsocket: / /... By inspecting the URL that you can tell which method of connection is used too.

• How do I know that the event log are reported to any server

  Hello

  I can see all the event logs and error logs using the event viewer. But I want to know if newspapers are reported to some server just we report about a bug or non-response to application/software using the reporting window.
  I want to check if the event errors are reported on some server or not, if yes, to which server it is reported. Is this possible?
  The observer of events, or any application in the windows operating system keeps track of these reported error logs.
  Thank you
  Pankaj

  Hello

  As mentioned by Palcouk, Event Viewer records all events and activities on your computer but does not send it to any server. The call you have received is wrong / will call that could come from a potential hacker.

  I suggest that you go through the items listed below.

  http://www.Microsoft.com/security/online-privacy/prevent.aspx

  http://www.Microsoft.com/privacy/default.aspx

  http://privacy.Microsoft.com/en-in/fullnotice.mspx

  http://www.Microsoft.com/security/online-privacy/overview.aspx

  I hope that helps!

• Need of the event logs - can't go back before midnight

  We have VMView 3.1.3 and we are trying to see if a user has been connected to a virtual computer sometime last week.  By default, the event log only goes back to midnight today.

  Is there anyway to extend the time of the log events or in some other way, besides the journals in the Windows real events to monitor the use of the user and of connections/disconnections?

  Thanks in advance

  I haven't seen 3 very convenient server, but pretty sure it is the same for the 3 and 4.

  If the user connected through the server of the view, you should be able to see this event recorded in your login to view server logs.

  The default log level recorded all the simple events, including opening and closing session, you can enable logging more advanced, so it displays each logon in the details, but they can grow quite quickly.

  The default location for log: C:\Documents and Settings\All Users\Application Data\VMware\VDM\logs

  also these KBs might be useful: kb. VMware com/kb/1017939, Ko. VMware .com/kb/1007905

  See you soon,.

  Andr3y

• Display the event log: event ID: 32, the driver has detected that this \device\Harddisk1\DR3 there cache write-enabled

  I recently discovered this error in my view the event log, do not know how to locate which disc it means or how to disable the setting cache: it's the XML view details screen.

  -

  -

    <>disc"/ >"

    32

    3

    0

    0 x 80000000000000

    <>2010-08 - 25 T 04: 28:36.363Z"/ >"

    85397

    System

    Stu - PC

   

   

  -

    \Device\Harddisk1\DR3

    0F00100001000000000000002000048001000000100000C00000000000000000000000000000000000000000000000000000000000000000

   

   

  I hope someone can help me with this work out I seem to have nothing else than problems at the minute...

  Thank you

  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
   
  The filmThe Explorer accidents - in the control panel select Problem Reports and
  Solutions (Type wercon.exe in new task), go to historical problem, right-click
  your mistake and choose check for the Solution. You can also examine the details
  and AFTER the exact text of the ERROR here (that can pinpoint the source of)
  the error). .
   
  You can clean boot
  Troubleshooting http://support.microsoft.com/kb/331796
   
  Windows files for curruption click Start - all programs-
  Accessories - right on command prompt and choose Run as administrator.
  Type Cmd in the new task. Then type
   
  sfc/scannow
   
   
   
  --
  ..
  --
  "stusalford" wrote in message news: d85b4087-413f-4a7f-840 d-6b9c3ee73f0e...
  > I have recently discovered this error in my view the event log, do not know how
  > to find out who he average disk or how to disable caching: this is the
  > View of XML on the details screen.
  >
  >
  > -
  > -
  >
  > 32
  > 3
  > 0
  > 0 x 80000000000000
  >
  > 85397
  > System
  > Stu-PC
  >
  >
  > -
  > \Device\Harddisk1\DR3
  >
  > 0F00100001000000000000002000048001000000100000C00000000000000000000000000000000000000000000000000000000000000000
  >
  >
  >
  >
  >
  >
  > Hope someone can help me with this work out I seem to have nothing
  > but issues at the minute...
  >
  >
  > Thank you
  >
  >
  >
   
   

• A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information

  Original title: a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. Error code: 0 x 81000019

  I tried to back up my files using an external hard drive (which I have done before with Windows 7 64-bit), but recently I get the same error code. I have re-formatted external hard drive, run diagnostics on it, restarted the computer, etc and nothing seems to work. I also tried both options posted in another forum with the same error and too, they were not successful (external is already NTFS and now that it has been re-formatted is completely empty). Windows has more suggests? I hope not to have to use drag and drop my files whenever I want to save my computer.

  Thanks for the help!

  Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.

  Note: Backup of your hard drive as described in the article.

  How to fix error code: 0 x 81000033
  http://www.PAGESTART.com/win7br0x8100003301.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• EventLogger events does not appear in the event log Simulator

  So, I was more than a little frustrated with debugging Widget applications and decided to help me a bit.

  I've created a Widget extension that connects to System.out and the EventLogger BB using:

  Logger.Java:

  public class Logger {}

  public static final String APP_NAME = "AppName";
  public static final long GUID = 0xb50dd37e31148effL;

  public static enableLogging() Sub {}
  If (EventLogger.register (GUID, APP_NAME, EventLogger.VIEWER_STRING)) {}
  out ("recorder active.");
  }
  else {}
  ("EventLogger record has failed.");
  }
  }

  /**
  * Prints System.out and event log (if enabled).
  */
  public static {Sub out (String msg)
  String message = formatMessage (msg);
  System.out.println (message);
  log (message);
  }

  /**
  * Prints in the journal of the events with the ALWAYS_LOG level.
  */
  Public Shared Sub log (String msg) {}
  logEvent (msg, EventLogger.ALWAYS_LOG);
  }

  private public static Sub logEvent (String msg, int level) {}
  If (EventLogger.logEvent (GUID, msg.getBytes ())) {}
  System.out.println ("EventLogger.logEvent succeeded.");
  }
  else {}
  System.out.println ("EventLogger.logEvent failed.");
  }
  }
  ...
  }

  The Widget extension works.  I can not even log JavaScript stuff :

  somewhere in file.js:

  Logger.log ("it is JavaScript!");

  as seen by the Eclipse debug console:

  AppName [2010-09-24 12:01:33.609]: active recorder.
  EventLogger.logEvent succeeded.
  AppName [2010-09-24 12:01:33.625]: it's JavaScript!
  EventLogger.logEvent succeeded.

  RIDDLE ME THIS: WHY are the messages NOT sent to the event log Simulator! (9550 or 9800 > tools > Show Event Log does not show my posts.)

  My frustration with BB Monte.

  -----

  Windows XP 32-bit

  Install Eclipse Version: 3.5.2 version identifier: M20100211-1343

  Version plugin Web blackBerry: 2.0.0.201003191451 - 33

  BlackBerry Java plug-in Version: 1.1.2.201004161203 - 16

  BlackBerry Java SDK Version: 5.0.0.25
  BlackBerry Widget SDK Version: 1.0.0.201003191451 - 126

  6.0.0.141 blackBerry SmartPhone Simulator

  As a new BB developer, imagine my surprise when I discovered that the API of EventLogger BB and the BB Simulator event log were completely foreign.

  It's like they're really trying to confuse us.

• The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1

  Intermittent crashes. The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1. How can I find this device? This is probably a hardware problem?

  I look at intermittent crashes, where my cursor becomes an hourglass and the system does not yet meet the ctrl-alt-delete.  In the case of a newspaper, I find

  Event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1.

  How can I determine which physical devices this is associated?  This indicates a hardware problem, or driver or firmware may be the source? The system has worked very well for a few years.  I'm not aware of any change in software that took place recently, although I have had by force, remove and reinstall iTunes earlier.

  I run SMART on all players controls and run diagnostics.  I ran chkdsk on the one I found the culprit, but not mistakes.

  Just in case it was a deadlock linked to memory, I tried to use the Diagnostics memory Microsoft on floppy, but it would not write on the disk (even if I could format and copy the files freely).

  Hello

  Go to your configuration and see which drive is for each port; 1,2,3,4...

  Then go to the Device Manager and look at how many SATA controller you have and how many ports for each, then start count from 0 to IdePort0, 1, 2, etc. for each SATA controller, so if you have 4 ports for each SATA controller, here is how you came from:

  IdePort0 1 -, 2 - IdePort1, 3 car - IdePort2 and road 4 - IdePort3 in the order of road by car

  I hope it helps

• missing events in the event log

  I'm really new and can't help otherwise explain what just happened to me. I am running Vista home and checked my reliability and performance monitor. He came back to me with missing events to the event log. 14% of my missing log files. He told me that my buffer size and maximum ETW memory buffer is not obtimal that the data sets are collected. I have AVG free virus and found no problem. I had a lot of problems with the security of the networks and curious to know for myself if someone takes information just behind my computer. Everyone acts as if I am perinoid, but I had log events while at work and shut down the system. Some are could not log on to attemtps still more successful. Many programs also show other computers on my network even glancing only ethernet to my dsl modem. So I'm not under xp but have the same diagnostic report. I would be grateful no sign, that I am not paranoid. thanx

  Hi Dancin' madman,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Vista are you using?

  (b) is connected to a domain, or more than 10 computers in your computer network?

  (c) what the event log you are trying to check?

  For example, if you check the log of events for an Application, then you must

  1. click on Start, type Event Viewer in the start search and press enter

  2. in the Windows logs , select the Application, it should be under the winlogon (the last)entry. Right click on the Application and select Properties.

  3. in the Properties , you can check for the latest event logs and check the settings if it is set to replace the events, if you want, then you can change the settings.

  Because you are worried about the security of the network, you can try first run a scan of online security.

  Follow the below links for analysis online on your computer to verify if there is a malicious software on your computer.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/security/malwareremove/default.aspx

  You can also check if the Services of Windows Event log and dependence are started.

  1. Click Start, type Services in start search box and press ENTER.

  2. Locate the Windows event log in the mentioned Services.

  3. check if the status is started. If the condition column is blank, right click on the Windows event log Service and select start.

  4. open the Windows Service event log, select dependencies. In dependencies, select the Windows event collector and click ok to start the service.

  5. also check the dependencies in the Windows event collector and launch service dependencies by clicking OK.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error of MSN Messenger in the event log, the activation context generation failed

  When I open my MSN Messenger, I get an error, it appears in the event log.

  Activation context generation failed for "C:\Program Files\Windows Live\Messenger\msnmsgr.exe". Error in manifest or policy file "" online. A component version required by the application conflicts with another version of the component already active. Contradictory elements are: Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4148_none_5090ab56bcba71c2.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.1_none_e163563597edeada.manifest.
  -How can I fix this, I tried everything, uninstall & reinstall.
  -Install new C++ 2008.
  -Check the event log for errors related to this problem.

  Hello

  Follow these steps to resolve the problem:

  a. uninstall Windows Live Messenger. For detailed instructions, see How to uninstall Windows Live Essentials

  b. remove the Windows Live folder in the following directories:

  C:\Program Files

  C:\Program Files\Common Files

  c. Uninstall Microsoft Visual C ++ components.

  d. restart the computer.

  e. reinstall Microsoft Visual C ++ these links:

  Download details: Microsoft Visual C++ 2008 Redistributable Package (x 86)
  Download details: Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)

  f. restart the computer and install Windows Live Essentials.

  Now, run Windows update and check if there is Visual C++ updates and update the same.

• McAfee security center updates. The event log shows no signature of threat.

  McAfee security center updates. The event log shows no signature of threat. That it states that I am protected I never had any "alerts" from him. Anyone know if it's OK or a way to check it out. The following is in the event log

  Log name: Application
  Source: McLogEvent
  Date: 2009-08-28 17:42:15
  Event ID: 5000
  Task category: no
  Level: Information
  Keywords: Classic
  User: SYSTEM
  Computer: XPS
  Description:
  The McShield service started.
  Engine version: 5301.4018
  DAT version: 5722.0000
   
  Number of signatures in EXTRA. DAT: no
  Names of the threats that EXTRA. DAT can detect: None
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      5000
      4
      0
      0 x 80000000000000
     
      23259
      Application
      XPS
     
   
   
      5301.4018
      5722.0000
      None
      None
   
  

  Thanks for the reassurance. Tech support McAfee response to any problem seems to be reinstalled, I've done a dozen times.

• How to get to the event log in the simulator of blackberry 9800

  Can someone tell me how I could see the event log in the blackberry Simulator

  Plugin Eclipse - 3.5

  Version BlackBerry java sdk - 6.0.0.29

  Simulator model - 9800

  There is an option in tools - see the event log, but it shows

  0:08:13.659: LED: off
  0:08:16.862: LED: on (0x003f0000)
  0:08:17.034: LED: off
  0:08:20.112: LED: on (0x003f0000)
  0:08:20.284: LED: off
  0:08:23.487: LED: on (0x003f0000)
  0:08:23.658: LED: off

  Help me??

  Well, I just shot to the top of my Simulator of 9800 and it worked perfectly.

  Hold down the ALT key enter L, G, then L, then G

  Here, to the event log

• Unable to connect anything to the event log.

  I try to get the text of debugging in my program appears in the journal of the events of my Simulator (or anywhere else), but have had no luck. I'm talking about the journal join you by going to tools/Event Log.

  First I tried printing to System.out and System.err nothing has appeared in the newspaper.

  I then tried using the EventLogger, but still nothing. I did something really simple:

   long GUID = 0xaffff32c2ffffcffL;
   EventLogger.register(GUID, "test", EventLogger.VIEWER_STRING);
   EventLogger.logEvent(GUID, "testing!".getBytes());
  

  I can't think what else to try! If not, how can I try to get the impressions of debug my application?

  In our applications, treatment that adds events to the stored matrix is also a System.out.println (...) and therefore the output goes to the output in the JDE window.

  The log of the events for the Simulator window has a different goal - there is help on the Simulator 4.6 "BOLD":

  "The event log window displays information about events that occur between a device simulated BlackBerry® and its environment. The BlackBerry device Simulator saves the event messages for events, including when you simulate playback of audio files, place a phone call and flashing of the LED screen. »

• WMI is unable to provide the event logs remotely

  I'm watching windows remotely through WMI event.

  When we connect to the remote PC wbemtest we get output gaps:
   
  Select * from Win32_NTLogEvent where Logfile = "Our Custom Event Log"

  0 items

  But when we run wbemtest locally on the remote server, we can get all the events:
   
  Select * from Win32_NTLogEvent where Logfile = "Our Custom Event Log"
  191 items
   
  I checked all DCOM, RPC, WMI settings for the account, I'm trying.  Also, there is no firewall rule blocking the details I can see other measures just events.  Here are the steps that I took for the permissions:
   
  Start-> run-> DCOMCNFG
  My computer-> DCOM Config-> Windows Management and instrumentation-> properties-> Security-> all!
  Right click my computer-> properties-> COM Secutiry-> all!
   
  I rebooted the remote server and rebuilt WMI several times:
   
  wmiadap/f
   
  I followed these instructions and scowered the internet before coming here as a last resort.  Help, please!
   
  http://www.Paessler.com/knowledgebase/en/topic/3713-i-have-tried-a-lot-of-things-to-fix-my-WMI-what-else-can-i-try-to-avoid-reinstalling-Windows
  http://msdn.Microsoft.com/en-us/library/aa394603 (vs.85) .aspx
  http://www.opcactivex.com/support/tutorials/DCOM_Tutorial_-_Configuring_th/DCOM_XP/dcom_xp.html
  
   
  Also we recommend to connect the compliant Mircosoft. We will also write a forum for Microsoft about this problem and will keep you on this.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  Hope this information is useful.