Similar Questions

• cannot mount the database exclusively on 10g

  Dear friends

  Net app cause a problem today and the volume has been removed then now the DB can not open cannot mount database in EXCLUSIVE mode

  Help, please

  

  The net app is a problem today & volume was dismantled, then now the DB cannot open cannot mount database in EXCLUSIVE mode

  1. what your volume is in place and mounted?

  2. what database mounted on netapp files?

  3. If his having control-files and database files, then logically with them you can not mount the instance.

  Please perform the verification tests of the basis of the presence of files on mounted volumes / for access to the

  -Pavan Kumar N

• ORA-01102: cannot mount database in EXCLUSIVE mode in AIX after you have installed the database using dbca

  Hello!

  I have v7 IBM AIX and cluster HACMP set up two identical nodes included

  I have a head node after the installation of database using dbca I got error with the message:

  ORA-01102: cannot mount database in EXCLUSIVE mode

  Database cannot mount)

  Here is the information from the alert log:

  MON may 25 18:00:07 2015

  Starting ORACLE instance (normal)

  LICENSE_MAX_SESSION = 0

  LICENSE_SESSIONS_WARNING = 0

  SNA system picked latch-free 3

  With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST

  Autotune undo retention is enabled.

  IMODE = BR

  ILAT = 84

  LICENSE_MAX_USERS = 0

  SYS audit is disabled

  Commissioning:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With the options of partitioning, OLAP, Data Mining and Real Application Testing.

  ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1/

  System name: nodename

  Name of the node: nodename

  Version: 1

  Version: 7

  Machine: 0003F6E5D600

  Using the settings in /u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfiletestdb.ora side Server spfile

  Parameters of the system with default values:

  process = 500

  sessions = 772

  = 18G memory_target

  control_files = "/ ctl1/oradata/testdb/control01.ctl".

  control_files = "/ ctl2/oradata/testdb/control02.ctl".

  control_files = "/ ctl3/oradata/testdb/control03.ctl".

  DB_BLOCK_SIZE = 8192

  compatible = "11.2.0.0.0."

  db_recovery_file_dest = ' / backup/fra.

  db_recovery_file_dest_size = 100G

  undo_tablespace = 'UNDOTBS1.

  Remote_login_passwordfile = "EXCLUSIVE."

  db_domain = «»

  dispatchers = "(PROTOCOL=TCP) (SERVICE = testdbXDB)" "

  audit_file_dest = ' / u01/app/oracle/admin/testdb/adump.

  AUDIT_TRAIL = 'DB '.

  db_name = 'testdb '.

  open_cursors = 300

  diagnostic_dest = ' / u01/app/oracle '.

  MON may 25 18:00:08 2015

  PMON started with pid = 2, OS id = 14418020

  MON may 25 18:00:08 2015

  PSP0 started with pid = 3, OS id = 17891420

  MON may 25 18:00:09 2015

  VKTM started with pid = 4, OS id = 14090348 high priority

  VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms

  MON may 25 18:00:09 2015

  GEN0 started with pid = 5, OS id = 9109714

  MON may 25 18:00:09 2015

  DIAG started with pid = 6, OS id = 16449704

  MON may 25 18:00:09 2015

  DBRM started with pid = 7, OS id = 17104928

  MON may 25 18:00:10 2015

  DIA0 started with pid = 8, OS id = 13303950

  MON may 25 18:00:10 2015

  MA started with pid = 9, OS id = 12517522

  MON may 25 18:00:10 2015

  DBW0 started with pid = 10, OS id = 11993232

  MON may 25 18:00:10 2015

  LGWR started with pid = 11, OS id = 15401010

  MON may 25 18:00:10 2015

  CKPT started with pid = 12, OS id = 6619318

  MON may 25 18:00:10 2015

  SMON started with pid = 13, OS id = 16515222

  MON may 25 18:00:10 2015

  RECCE has started with pid = 14, OS id = 13172906

  MON may 25 18:00:10 2015

  MMON started with pid = 15, OS id = 15794324

  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...

  MON may 25 18:00:10 2015

  MMNL started with pid = 16, OS id = 18546742

  commissioning or shared server 1...

  Environment ORACLE_BASE = / u01/app/oracle /.

  MON may 25 18:00:11 2015

  ALTER DATABASE MOUNT

  sculkget: failed to lock /u01/app/oracle/product/11.2.0/dbhome_1//dbs/lkTESTDB exclusive

  sculkget: lock held by PID: 3670226

  ORA-09968: cannot lock file

  IBM AIX RISC System/6000 error: 13: permission denied

  Additional information: 3670226

  ORA-1102 marked during: ALTER DATABASE MOUNT...

  But if I install the darabase even dbca on node secondary, all installed and executed successfully.

  But in the two nodes even permissions, user oracle and oinstall group ID identified the same and $ORACLE_BASE and $ORACLE_HOME user owner oracle and oinstall user group.

  A someone has encountered this problem and solved?

  Thanks in advance!

  Hello

  you are using IBM AIX PowerHA for your database (active/passive) configuration. then you just install the binaries 'once' on one of the nodes. then coordinate with your operating system administrator to configure the fail the test scenarios.

  for your question. before you start the database, make sure that there are no "orphaned" oracle process using the UNIX grep command:

  $ ps - ef | grep ora

  Kill the oracle of the hanging of the process to release the lock on the database file handle:

  $ kill-9

  I hope this helps.

  Kind regards

• ORA-01102: cannot mount database in EXCLUSIVE mode

  Hi I work on Windows 2007, 64-bit, with oracle 11g: 11.1.0.6.0

  Today, I created a tablespace of cancellation more as undotbs2, and then I went to undotbs2 database.

  Then, I gave the order to drop the undotdb1.  He has successfully completed.  but undo datafile has not been eliminated. So I tried to manually delete the data file it didn't ' success.

  So I stop the database & then deleted file manually

  . After giving the start command, I was getting this error

  of alert_log

  ORA-01157: cannot identify/lock data file 3 - see DBWR trace file

  ORA-01110: data file 3: ' E:\APP\ADMINISTRATOR\ORADATA\UNDOTBS01. DBF'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-1157 marked during: alter database open...

  Kills Jul 30 16:10:48 2013

  Starting ORACLE instance (normal)

  Then I dropped the datafile undo

  Alerts log

  ALTER database datafile ' E:\APP\ADMINISTRATOR\ORADATA\EFVAT\UNDOTBS01. DBF' offline drop

  Completed: alter database datafile ' E:\APP\ADMINISTRATOR\ORADATA\EFVAT\UNDOTBS01. DBF' offline drop

  ALTER database open; database opened successfully.

  but she was still showing undotbs1 undo_tablespace parameter, so I created a more (2nd one) undo tablespace. I'm going to this error in the alert log

  ORA-30012: undo tablespace "UNDOTBS02" there is not, or of the wrong type

  After that, I'm not able to mount the database I m getting as below

  Alerts log

  ORA-09341: scumnt: unable to mount the database

  OSD-04400: impossible to acquire the internal process semaphore

  S/O-error: (OS 183) cannot create a file when that file already exists.

  ORA-1102 marked during: ALTER DATABASE MOUNT...

  get this error when I try to start the database

  . ORA-01102: cannot mount database in EXCLUSIVE mode

  974427 wrote:

  Hi I work on Windows 2007, 64-bit, with oracle 11g: 11.1.0.6.0

  Today, I created a tablespace of cancellation more as undotbs2, and then I went to undotbs2 database.

  Then, I gave the order to drop the undotdb1.  He has successfully completed.  but undo datafile has not been eliminated. So I tried to manually delete the data file it didn't ' success.

  So I stop the database & then deleted file manually

  . After giving the start command, I was getting this error

  of alert_log

  ORA-01157: cannot identify/lock data file 3 - see DBWR trace file

  ORA-01110: data file 3: ' E:\APP\ADMINISTRATOR\ORADATA\UNDOTBS01. DBF'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-1157 marked during: alter database open...

  Kills Jul 30 16:10:48 2013

  Starting ORACLE instance (normal)

  Then I dropped the datafile undo

  Alerts log

  ALTER database datafile ' E:\APP\ADMINISTRATOR\ORADATA\EFVAT\UNDOTBS01. DBF' offline drop

  Completed: alter database datafile ' E:\APP\ADMINISTRATOR\ORADATA\EFVAT\UNDOTBS01. DBF' offline drop

  ALTER database open; database opened successfully.

  but she was still showing undotbs1 undo_tablespace parameter, so I created a more (2nd one) undo tablespace. I'm going to this error in the alert log

  ORA-30012: undo tablespace "UNDOTBS02" there is not, or of the wrong type

  After that, I'm not able to mount the database I m getting as below

  Alerts log

  ORA-09341: scumnt: unable to mount the database

  OSD-04400: impossible to acquire the internal process semaphore

  S/O-error: (OS 183) cannot create a file when that file already exists.

  ORA-1102 marked during: ALTER DATABASE MOUNT...

  get this error when I try to start the database

  . ORA-01102: cannot mount database in EXCLUSIVE mode

  Well, your trace file indicates that the above description is innaccurate: you did NOT create an undo tablespace undotbs2, you have created a undotbs2 permanent tablespace.

  You may be able to repair this situation, like this:

  startup nomount

  ALTER system set undo_management = manual scope = spfile;

  immediate stop

  startup

  create undo tablespace undo3 datafile ' / whatever/you.like ' size XXg;

  ALTER system set undo_tablespace is undo3 scope = spfile;.

  ALTER system set undo_management = auto scope is spfile;.

  immediate stop

  startup

• JavaFX WebView does not not a url with https

  Hello
  
  I'm working on JavaFX webview. When I try to load a url https webview is not created. webengine. Load("https://..."); It gives an unexpected error.
  
  I found a solution in stackoverflow http://stackoverflow.com/questions/13356633/javafx-webview-not-loading-https-page.
  Saying: you must have sunjce_provider.jar bundled JRE. I have the pot in my JRE package, but the Web mode does not.
  
  Same URL if I load it into the browser gives certificate expired in war. When I click on continue it displays the page but in the javaFX webview page does not load.
  
  Can one suggestion, what could be the problem.
  
  Thanks in advance

  Is there a program if there is a new url certificate we he added to the cacerts file security JRE.

  If you add each certification that you encounter in the trust store, you can as well disable the verification of certificates or use simple http instead.

  Just google for: "java disable certificate validation.

• Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

  Hi all

  Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

  Here are the specs:

  1 Macbook Air 11.5 "running on El Capitan (10.11.1)

  2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

  Before the accident yesterday, it was working OK.

  Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

  I can assemble and disassemble a USB stick very well.

  Any help would be appreciated.

  Thank you!

  Maybe you can explain a little better.

  I would like to make some general comments before having your replay.

  It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

  For TM, the rule is that the drive is about 3 times the size of the boot disk.

  Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

  I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

  Have another drive formatted NTFS for Windows.

• JavaFX WebView in case of failure of the hyperlinks on Tomcat

  I'm looking to integrate app JavaFX with JSP and Servlets, Web view and running on Tomcat.

  Opened directly in Firefox, hyperlinks in JSP below all work very well, both for the Oracle's Web site & my servlet ('/ testFX2' in the web.xml file).

  In addition, it runs locally (i.e. NOT by Tomcat), my application can instance a WebView view Oracle's Web site.

  After the deployment of Tomcat, however, WebView will be instance this JSP, but ties have no effect, even if the < form action... Submit > option makes links to very good Servlet (?)

  Can someone explain this behavior?

  {code}

  < %@page contentType = "text/html" pageEncoding = "UTF-8" % >

  <! DOCTYPE html >

  < html >

  < head >

  Initial JSP < /title > < title >

  <!-hyperlink works in Firefox, NOT in mode Web (?) ->

  " < a href =" http://www.Oracle.com/products/index.html "> OracleSite < /a > .

  < / head >

  < body >

  " < % @ taglib prefix = 'c' uri = ' http://Java.Sun.com/JSP/JSTL/core " %>

  the initials JSP < h1 > < / h1 >

  < a href = "< c:url value =" / testFX2 "/ >" > go Servlet < /a > < br > <!-works in Firefox, NOT in mode Web (?) ->

  < form action = "< c:url value =" / testFX2 "/ >" > <!-works! ->

  < table cellspacing = "5" border = "0" > < tr >

  < td align = "right" > Param: < table >

  < td > < input type = "text" name = 'firstParam' > < table > < /tr >

  < td > < br > < input type = "submit" value = "Submit" > < table > < /tr >

  < /table >

  < / make >

  < / body >

  < / html >

  {code}

  An unexpected, but easily remedied problem by signing the JAR project prior to deployment to Tomcat.

  Easy to do in NetBeans: project properties > deployment > request unlimited access (self-signed, while developing).

  If my JavaFX application connects now, through WebView/Tomcat, directly from JSP, servlets and external Web sites.

• Mute JavaFX WebView 2.2

  Is anyway to turn off the sound on a display of web pages? For example, I have a webview, which charge a youtube url, but I don't want the sound to play, is it possible to turn it and the new? Thanks in advance

  Request a feature here: http://javafx-jira.kenai.com/

  Up to what this feature comes out, manipulate the Web page javascript code.

  It may be possible to recover all of the audio and video DOM [url http://www.w3schools.com/jsref/met_document_getelementsbytagname.asp] using document.getElementsByTagName objects and set their property .volume on 0.

• How to print correctly JavaFX WebView?

  How to print the content of the Web view in JavaFX?
  
  By that, I mean taking into account the rules @page CSS and page break properties.
  
  I know a solution posted here printing in general with JavaFX: https://blogs.oracle.com/rakeshmenonp/entry/javafx_printing,.
  but I can't do consider printing the CSS rules for paged media, although the underlying WebKit platform should have no problem interpreting them.
  
  Published by: 889232 on June 25, 2012 02:31

  JavaFX has no print media.

  Consult the following feature requests:
  Support CSS @media print http://JavaFX-JIRA.Kenai.com/browse/RT-17289
  Webview and HTMLEditor http://JavaFX-JIRA.Kenai.com/browse/RT-17666 should support print their content
  http://JavaFX-JIRA.Kenai.com/browse/RT-17383 Printing

  ------------------
  Workarounds

  You can take a snapshot of a node to an image in the buffer by using the awt robot and print that.
  Or you can use 2.2 and take a snapshot of a node on or off the screen to an image of JavaFX, that convert an image in the buffer and print (although this method had still some problems with the current generation of developer 2.2b13 when I tried it).

  Example program for the 2.2 JavaFX api snapshot is here: LineChart in PDF with IText (it can be adapted for WebView).

  Use the HostServices.showDocument api to display the HTML in a browser to system and create a user print from that.
  http://docs.Oracle.com/JavaFX/2/API/JavaFX/application/HostServices.html#showDocument%28Java.lang.String%29

• Partition in gray and cannot mount/erase, help!

  So I used to have bootcamp on my macbook pro, until there was some kind of issue that made me delete, or so I thought.

  So today after clearing my computer out of the way of bootcamp, I started bootcamp and was greeted by a message saying

  "The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows."

  So logically I open disk utility and surely, there were three partitions; 12x12cm HD, recovery and the other named Untitled. The partition named untitled had 99GB of storage all be exhausted and has been grey, I tried to clear it, and then mount it, but nothing seemed to work. (Erasing gave an error message) I tried paritioning the SSD, but it said something like "Enable logging" (which I've tried to do, but were grayed out for me)

  Please help, I have no idea what's going on and I really want to get bootcamp running!

  Fixed!

  I decided to go ahead and try to start windows, and surely, it has not been entirely removed. I installed the drivers installation, selected the 98 GB partition and deleted. Then, I left out of the facility, in OS X and wollah, back to a single disk again!

• WebView: cannot scroll through long lists drop-down/select

  I added webview standard, but are unable to scroll through long lists on drop-down lists (html select). It shows just the best selections and im unable to scroll in the list to select something lower.

  Someone else has webview with selection lists for a long time who have this problem, or do NOT have this problem?

  the latest version of the OS fixed this! So update your OS to dev for the device and you should be ok!

• Cannot mount the frame to the text box

  Hello!

  I'm in InDesign CS6, on a 2011 iMac, and I often see this problem when I try to make a block of text to its content.

  Initially, it looks like this:

  

  Then I click on "mount the frame to the content" in the menu object, or by double-clicking on the handle at the bottom right of the text box.

  And then I get this thing:

  

  The police is Montserrat (free fonts, you can install it and see how it feels on your side).

  Editing is perfect on the left and right and on the bottom, but there's a margin of 10 pixels between the top of the text and the text box.

  It's really annoying when I try to align the text boxes with objects horizontally, because I then create outlines for text boxes.

  Given that this does not happen always, only with certain fonts, I am led to think that the height of the letters is not correctly calculated within the font file? I'll ask the proponent to the police for help as well, unless there is something like a value of high indentation of the hidden default page that I'm not aware of, or a solution of workaround that someone will report.

  Thank you

  In ID, select the block of text, right-click, and choose Options of text block, then the Baseline Options tab. You can set the first base line on the menu drop-down.

• Cannot mount NFS Debian to esxi 5.1 - Please help

  I've tried everything. I'm extremely frustrated on the way this beginner step...

  Idea was the installation, a debian for nfs box and use sharing nfs as a data store in esxi.

  debian installation, Setup nfs-kernel-server

  tried to get through vshpere

  I get the following message is displayed:

  Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '192.168.1.95' failed.
  192.168.1.97:/esxi has no mounting NFS: the mount request was refused by the NFS server. Verify that the export exists and that the customer is allowed to ride.

  Ive looked everywhere and found very little on this subject... I think that its pretty beginner so no one's going in depth on how to do it step by step... I think that sharing is good and the permissions are good but I don't know how to check via the coast host or client...

  any help would be appreciated... I tried a lot of online how tos with no luck.

  Jon

  What is the absolute path to /esxi?

  You said above "my root" and I assumed to mean that esxi is a directory directly under /, but is that correct? Looks like maybe not.

• Cannot mount NFS via client - can however on the host.

  Hello

  I have problems with a NFS volume to ESX 4.1 as a data store.

  I can mount the NFS volume on the host directly from the command line.

  I wasn't able to do it on the command-line for awhile, then I realized that the Firewall setting was there.

  Once I change the Firewall setting, I could get directly on the host computer.

  But when I try the client - configuration-> data-> add datastore store I get

  Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESX '10.23.43.54' failed.

  I also tried to stop and start the nfs and portmap services.

  Thank you!

  Jay

  Hi Jay,.

  From the command line, you use "move up" or "esxcfg-nas"? Try to use the other and take a look on the vmkernel log (/ var/log/vmkernel).

  Concerning

  Franck

• cannot mount vmdk (Linux) with write permissions

  Hello world

  I have a little trouble using vmware-mount to mount a vmdk of 50 GB size dynamic that has been created using VMWare Studio. The vmdk is a Ubuntu Linux 8.04, and it is the ext3 file system. Also, I'm using Ubuntu 8.04 to mount the vmdk. I can mount the vmdk, but no matter what I do - it's a read-only file system.

  The main reason why I need write access to a new unit, created from VMWare studio is so that I can update the license files without having to build a tremendous amount of devices different everything due to a slight change in a XML file for licenses...

  -Libfuse is installed and running (obviously, since I can get read-only). I made sure I ran "# chmod 755 system.vmdk" so that it has write permissions.

  -If I go up the vmdk, say I have this: "cd/mnt/root; Touch test; "on the first time, it will actually create the file (at least it seems), if I try to do it again, I get ' touch: can't touch 'test': read-only file system"... " However if I create a file, and then unmount/back, the file has not been actually created.

  I'll follow up with an attached fuseMount.log, but in the meantime - someone has an idea?

  Thank you

  draygen

  What type of VMDK is there, not a drive compressed (i.e. optimized flows) type by any chance? You can not write on these discs.

  -Remy