Need settings for LAN only on Airport Extreme

Similar Questions

• Need drivers for Lan, sound and PCI for Satellite A105-s4074

  I need drivers for LAN, PCI and its for satellite A105-s4074.

  Thank you

  I put t know what operating system you are using, but you should find the drivers for this laptop on the page of the Toshiba driver we.

  Satellite A105-s4074 was designed for the American market, and therefore, you should use this page:
  http://www.toshibadirect.com/TD/B2C/home.to

  Best regards

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Need a cable Modem (have an Airport Extreme)

  I am a subscriber of internet high speed from Comcast in the Chicago area.  I have their most recent Wireless Gateway that supports the 802.11ac fall on my newly upgraded Airport Extreme.  I'm looking to buy my own cable modem and seeks recommendations based on the information.

  Anyone who wants to help out? Thank you!

  In fact, I would like to start with modems that that Comcast will be supported. The only ones you should avoid a potentially are the Arris / Motorola SB61XX-series modems as they have been known to be incompatible with airport base stations.

  For recommendations, I suggest you Cisco, as the DPC3008 models.

• How to configure DynDNS for camera IP with Airport Extreme?

  Hello... I recently bought an airport extreme 6th gen.

  I have an IP camera installed on my cabin, which I would like to access remotely for security reasons.

  My internet provider does not have a fixed IP address, so I need to be able to access my camera, even if my IP address changes.

  I understand that I must install a Dyn DNS, but I can't seem to set it up on my airport extreme.

  Is it possible to do?  If not, is there any IP camera on the market that is completely compatible with Airport Extreme for remote access?

  DynDNS don't think you can do this with an Airport Extreme

  https://help.dyn.com/airport-and-time-capsule-with-dynamic-DNS/>

  If you have another computer in the cabin, you can then run a DynDNS update utility on this computer.

  If not, perhaps you should consider a different router for the cabin.  You could put the Airport Extreme in Bridge mode and still use it.

• Need settings for Services for Vista Home Premium, 32-bit SP2, Server 2008

  Several problems.  I know that I have too many services running that shouldn't be and need to put them back where they should be. In other words please. Auto, delayauto, etc manually.

  My pc has little memory left. I can't save anything as it says that I have installed more. That says it's a problem of the file configuration. It wont let me save the files, and I need to backup my pc before making a return to the factory. That I really don't want to do. My program disks were taken.

  I know that my services settings are wrong.

  I can not also disconnect my mass storage, it says a program to use it and I have to wait. D - COM is the only thing that is using it, and this isn't something that I can't stop, no option for.

  I'm so frustrated and now I tells me I need to upgrade to Windows 7. I can't afford it. I am disabled and have an income that is below the poverty line.  So, I need to keep this Vista going as long as possible. I cleaned up the files, etc. defraged. It made no difference on my drive "D". He said I'm a little less! 5% room left for my computer to run. I made the mistake at time of backup from my pc to the drive d. I used the wizard to clean off. He didn't not work and I do not know how to open it. Or what I want. The fix - it Center goes through my pc and tell me what is wrong and when I check what he says of difficulty, they are already there, which suppose to be. I get a lot of false positives.

  Need a miracle.

  Can help you.

  Hello

  "I'm so frustrated and now I tells me I need to upgrade to Windows 7."

  You do not have to upgrade to Windows 7.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "It makes no difference on my"D"drive. He said I'm a little less! 5% room left for my computer to run. «I made the mistake at the time of backup of my pc on the d drive.»

  D: drive / Partition is usually your recovery Partition.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You cannot save installed programs unless you do a complete picture of the PC, which would not solve your problems.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  See you soon.

• Use of AT & T as provider - is no longer can get mail on Thunderbird. Need settings for at & T, yahoo No.

  Thunderbird has worked for more than a year, and then this morning it would not download emails. Asked for a password. As far as I know I don't have a password Thunderbird. Looking at the server settings showed Yahoo as a server. I don't use Yahoo. Don't know how it got there. I have at & T as my ISP. I tried to configure Thunderbird with ATT that my server... Server name: mail.att.net my email address is [email protected]. I put the connection to zero security. I tried the 100 port (default is 110), but it did not work. (I sent several messages to my e-mail of tests: [email protected] none came through.) I would really appreciate a full instruction set of parameters. Thank you

  Said Carollee

  Thunderbird has worked for more than a year, and then this morning it would not download emails. Asked for a password. As far as I know I don't have a password Thunderbird. Looking at the server settings showed Yahoo as a server. I don't use Yahoo. Don't know how it got there. I have at & T as my ISP. I tried to configure Thunderbird with ATT that my server... Server name: mail.att.net my email address is [email protected]. I put the connection to zero security. I tried the 100 port (default is 110), but it did not work. (I sent several messages to my e-mail of tests: [email protected] none came through.) I would really appreciate a full instruction set of parameters. Thank you

  I was able to fix it myself.

• Need settings for base color for the Web (graphic) design

  Ok... I know there are 1 million different threads on the topic and found confused me too much on the subject.

  I'm looking for just standard (not detailed) on setting up the color scheme in photoshop CS5 to design my web graphics.

  I work for a small business that color management is not a huge problem, but want to start somewhere.  And if someone can give me the web layout of basic color settings (maybe even a palette download link) for the PS to help me get started, it would help a lot!

  Thanks in advance for any advice

  I would first profile your gamma of 2.2 the monitor profile. D65/6500 or point native white.

  A package of material is recommended for this task (a washer that reads the screen).

  So try these settings in Photoshop (Edit > color settings):

  

  Try these settings and save it with a unique name.

  These settings will give you a warning dialog opening if your file does not have an embedded ICC profile, or if the profile is different from that of sRGB.

  Always 'Use embedded profile' and then convert to sRGB when necessary.

  If your file does not have an embedded profile, Edit > assign profile (sRGB is a good try, then Adobe RGB, ProphotoRGB...)

  Leave your setting Save For Web (SFW) by default.

  This will automatically convert sRGB and the profile of the band...

• Internet connection with XP Pro SP3 and Airport Extreme - possible only Internet with no secruity, WEP - "status is always acquiring network address.

  IMac seen the router and connected flawlessly, Sony Vaio however under secruity always gives me "absorbing the network address", I was looking around and heard xp pro sp3 has problems with wpa2 so I changed the settings for wep on apple Airport extreme and it STILL does not work. If I have no secruity that it picks up the signal from the internet and everything is fine. I tried to update the drivers for the wireless LAN card already, any input would be great

  SOLVED... apparently xp pro sp3 has problems with wpa2, it refuses to connect. I went to settings on extreme airport secruity but wep was not an option, I had to click on OPTION on my MAC keyboard, then click the settings secruity and wep is there, so I removed all the "preferred networks" and restarted the process 'learning' on the vaio and everything's fine. Thanks for all the help, I can get some rest tonight

• Installation of Airport Extreme for Motorola gateway?

  I was hoping someone may be able to help me go through the steps required to configure my Airport Express base station (new) new gateway of Motorola Surfboard SBG 6580 (Cox is my ISP). My main machines are a mid 2010 21.5 "iMac under OSX 10.8.5 and a mid 2010 15" MacBook Pro running OSX10.10.5

  The research I did, I know that I will need to disable the features wireless on the bridge and run an ethernet cable from one of the WAN ports to the Airport express. I wonder if it's just a matter of going in my router settings and turn off the wireless, so I can just use it as a modem, or is there something else I need to turn off while I'm in these settings?

  I've got also a Netgear wifi extender used in my current set up, but I hope I won't need more once I created the Airport extreme, but if I need, it would be compatible with the Airport extreme?

  I'll always be able to use other ports WAN ethernet on the motorola, once the most extreme airport is set up? I ask because I currently use all 4 ports on the motorola, and the Airport extreme has only 3.

  Finally, I would like to use the same name as my current wireless network, there will be no problem with that, and I'll be able to hide my network name, like I currently do? I think it's an option "do not broadcast" currently so it doesn't show up for people to scan for wireless networks

  Devices that use my wifi are for most Apple products with the exception of a HTC smartphone, a stick of fire from Amazon and a smart TV.

  Thanks in advance for any help/tips

  Jeff

  Unless you really need to disable the gateway wireless, you may configure your network easier by defining just two to a network roaming type .

  However, before thinking about this, it would be useful if we understood what your networking goals are for these devices. Also, can you please give the model numbers exactly for each of your AirPort base station you want to use in your network.

• Wake on LAN - AirPort Extreme

  I'm trying to configure the Wake on LAN for my AirPort Extreme and Windows 7 PC, reboot with my iPad.  It works fine when the iPad is on the local network, but no power on the PC when I'm not on my network domestic.  I put airport to the port before 9 to the PC as directed, and made sure the PC has been configured to accept magic packets.  Any help?

  Apple wake on lan system is different... and there is a good chance the router from Apple not go to work.

  The best and easiest around the issue is to install a different router... and use airport extreme for the wireless. Make sure the PC is connected to the main router although no airport.

  http://www.Neowin.NET/forum/topic/1186835-wake-on-LAN-WOL-with-Airport-extreme-2 013 /.

• Is Airport extreme dual band

  I have a double router band nighthawk netgear as my base station to the floor and I put my Airport extreme downstairs as a wifi extender told me that if my airport extreme is only single of the band will slow down the network of hole. Is this true?

  We need the model number of your AirPort Extreme to tell you whether it is simple or double band. The model number is at the bottom of the airport... starts with an 'A' followed by 4 digits.  An example would be the A1143.

  Then, it might help to understand that Apple uses proprietary technology to Wireless "extend" a network that is designed to allow only Apple routers extend the signal of another router from Apple.

  When wireless routers expand a network, there is always a loss of about half of the potential speed on the network. Nature of the beast with a wireless extension.  This loss can be avoided if the routers connect using a wired Ethernet connection.

  You don't specify how the airport will connect to the Netgear network, so it would be useful that you could clarify on this.

  It is very unlikely that an airport could not Wireless extend the signal from a third-party router. If your airport is an AirPort Express Terminal, it can probably 'join' the Netgear network so that it will work for AirPlay or allow a remote USB printer to connect.

  But the Express (or extreme, if that's what you have) not connect "extend" the network when he "joins", then wireless near the airport unit will always be all the way back to your main router.

  So, it might be a good idea to check the settings of the Express using AirPort Utility to find out exactly what it is and is not on your network.

• Airport Extreme loses the connection to the home network

  I have an Airport Extreme (AE) with Cox Internet in my house. Version AE 7.6.7 since the end of may 2016, I lost WiFi connection radomly. I had a Cox technician out who finished just change a 'filter' in our neighborhood who feed on other Cox at the reception. He said this analog filter had to be upgraded to a digital filter.  Despite this, my WiFi kept down again. According to other Threads of the community, this problem was solved by putting the IPV6 in AE parameter for "link-local only.  I did this and still it is falling.

  According to a recent post in support of Cox:

  Most of the routers to retail, especially those produced in recent years, are completely compatible with IPv6. Cox has determined that the Apple AirPort Extreme routers, including Time Capsule models, may know Internet connectivity issues when running the firmware released before May 25, 2016. For more information, contact Apple Support.

  To a Moderator: Apple will have an AE update for this problem?

  The moderators of the forum are not questions on a user to user support forum, so don't expect a response from an Apple employee.  Please contact Apple Support directly if you wish to speak directly with Apple.

  Then, Apple has already released the new firmware... 7.6.7 May 25... so it's not the question that you reference in the statement on the website of Cox. Cox was referring to a firmware sooner, like 7.6.4, for example in their declaration.

  We have seen a number of messages from other users of Cox, who reported that the new firmware has resolved connection issues that existed before.

  To find out where the real problem may lie, I suggest that you connect a computer (with the wireless turned off) directly to one of the LAN ports <>- on AirPort Extreme for a few days and keep an eye on the connection.

  Post back your results. Then, we'll know if you have a general Internet... connection problem that could be a problem of modem... or a single wireless issue.  In all cases, it will help if you provide the model number of the AirPort Extreme you have... and... he make and model number of the modem you are using at the moment.

• Charter &amp; Airport Extreme: random drops/disconnects

  OK, I'm at the end of my mind to try to get the Charter to work with my wifi from the airport...

  After years of strong connectivity, my modem Asus started appearing as "disconnected" Airport utility. I have hard reset the modem, replaced the modem, replaced the coaxial cable to the modem, replaced the 6th gen AirPort Extreme (connected via wan to the modem), hard reset and rebuilt factory default as long as the airport, and the 5th gen Airport (connected by Ethernet at the 6th and in bridge mode) and always keep my modem dropouts or moments where my Airport 6th get suddenly seems to now show activity utility Airport.

  I have connected a laptop directly to the Asus without any problems at all, so it's within my network. But I am confused... And very frustrated.

  I'm including some settings below, but any help would be appreciated... I don't know what has changed.

  Oh, and the two airports are running the latest firmware for their respective models.

  Thank you all!

  For the gen 6 Airport extreme, directly connected to the modem via the Wan:

  • Is connected to the Internet via DHCP
    • Configure IPv6 is set to "Link-Local" only (I have checked and don't see that IPv6 is currently active in my Charter service area)
  • Wireless network mode is "Create a wireless network" and I chose the channels for 2.4 and 5 Ghz that I found to be opened via iStumbler
  • Network has the router Mode DHCP and NAT, with an active lease 365 days DHCP and NAT Port Mapping Protocol

  For the extreme 5th generation of airport, connected by ethernet to the 6th gen:

  • Is connected to the Internet via DHCP
    • Configure IPv6 is set to "Link-Local" only (I have checked and don't see that IPv6 is currently active in my Charter service area)
  • Wireless network mode is "Create a wireless network" and I selected channels for 2.4 and 5 Ghz as the 6th gen
  • Network is set to "Off (bridge Mode)" router Mode

  6th Gen airports have had a lot more problems with the compatibility of the modem that previous generations, so if you have the time... connect the 5th Gen airport to the modem and put in place to do DHCP and NAT to the 6th Gen in bridge... Mode to see how things work out like that.

  Charter do not have active IPv6 yet, but they and about all the other suppliers have been the addition of new equipment and changes to their service. This can be a factor in your connection problems.

  Yes, I'm sure that the Charter will say that this has had no effect at all on their regular service of IPv4... Since the ISP always claim that they have no issues when you ask them about their service.

  If you decide to exchange the Gen 6th and 5th generation, as I suggested above... and you still have trouble connecting... then you are going to have to decide whether to keep the airports and to try another brand of modem... or... keep the modem and try another brand of router.

• Problems with the Wi - Fi (Airport Extreme and At &amp; t Uverse questions)

  Hello

  We used an Airport Extreme with AT & T Uverse to our network wireless successfully since 2010. Recently Uverse sent me a new modem, and our wireless service has taken a turn for the worse. The network has two different wireless Internet for our House. Please let know us how we can solve this problem. We use a Mac, mac laptop 2, iPad 2 & all Iphones 2 are up-to-date with the latest version of the software.

  Mike

  The AT & T device is a modem/router that provides a signal of wireless network with a name something like ATTa1b3c3d, for example. Your AirPort Extreme also provides a wireless signal by using a wireless network name that you have assigned to the device.

  Thus, it would be normal for you to be able to 'see' the two wireless networks.

  If you don't want to not use the ATT Wireless, just ignore it... or... If you think that it is at the origin of the conflict with the wireless AirPort Extreme, it is possible to turn off wireless on ATT modem/router, so that you only 'sees' the AirPort Extreme network.

  AT & T support can help you in the task of turning off the wireless... or... If you have the number of brand and practical model of modem/router, AT & T, we can try to find an online configuration guide which could provide instructions for this task.

  If you encounter a different kind of problem, please provide details on the problem.