JavaScript library to manage Twitter update_with_media in function?

Similar Questions

• When the Manager of the custom function in a configuration of link file gets error?

  The question she get error when the Manager of the custom function in a config file in the plan to include the link.
  When she went to join the custom function Manager in the debugger, everything is OK.
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < configuration >
  < custom function platform = "DotNet".
  library-path="G:\RB1\Include\CustomFunctions.dll".
  Class="Viking.CustomFunctions.CustomFunctions"/ >
  < / configuration >
  
  THS, category and path is correct.
  So is there any problem for < custom function platform = "DotNet"?
  
  OPA version 10.2
  
  OPA error message translated from the Germany into English: Exception has been thrown by the target of a call

  In general, you should not give the full path of the custom function, it should be rather in relation to the project include file.

  for example:
  

  and then make sure that the CustomFunctions.dll file is copied into the project folder until the project is built.

  In addition, if you use 10.2 for a new project, the mechanism that you use is now replaced. An extension of the custom function is the new thing, and it will look much nicer when it is used in the rules. Refer to the section 'Write a Custom function Extension' in aid of developer for more information.

• Msgrocm.dll Setup library could not be loaded, or function OcEntry could not be found. Please notify

  I seem to have a problem with getting to the section Adding Windows /Remove. components Whenever I try to click on windows control panel Add/Remove programs/add components configuration, the following message appears; Msgrocm.dll Setup library could not be loaded, or function OcEntry could not be found. Please notify

  Hi jaderob,

  Follow the steps and check the results below:

  a. Click Start, point to control panel and then click System.

  (b) in the Advanced tab, click Environment Variables.

  c. under System Variables, click path, and then click on edit.

  d. click in the Variable value box, and then press END to move the insertion point at the end of the Variable value box.

  e. Type; % SYSTEMROOT%\SYSTEM32\WBEM, and then click OK.

  f. click OK and then click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Add the javascript library

  Hi all, I want to add the javascript library for my applications.  I tried https://developer.blackberry.com/native/documentation/cascades/dev/javascript/ dan http://qt-project.org/doc/qt-4.8/qdeclarativejavascript.html guide but it did ' t work.

  Anyboy has a solution?

  Thank you.

  The JS in QML engine is a bit different from what you would find in a browser. For example, documentation:

  "In QML you can't add or change, members of the global object in JavaScript. It is possible to do so using a variable without declaring it accidentally. In QML it will throw an exception, so all variables must be declared explicitly. »

  That's probably what you run in to.

• The webworks.js javascript library that is used is not compatible

  Hello

  Successfully, I signed a blackberry app and wanted to test it in the simulator when I got this JavaScript alert:

  http://ImageShack.us/photo/my-images/692/screenshot20130410at856.PNG/

  "Webworks.js (1.0.4.11) javascript library used is incompatible with the runtime WebWorks. Please replace your file webworks.js with Framework/clientFiles/webworks-1.0.4.7.js.

  Yesterday I installed the new SDK WebWorks for Mac OS X and I'm not sure why it is not recommended.

  You have ideas how can I remedy this?

  concerning

  Downloaded the older SDK (1.0.4.7) and now it's working.

  BTW. following the Hello World tutorial and packaging tutorial:

  http://developer.BlackBerry.com/HTML5/documentation/creating_a_bb10_app_2007539_11.html

  using the latest SDK (1.0.4.11) results in a does not work (at least in the newest Simulator) App.

  Try the same example Hello World with the old SDK works like a charm.

  I think somethings broken with the new SDK unless I have really something wrong here.

  Greetings

• LabVIEW library 1-d array of string function call

  Help ~!

  Hello the LabVIEW developers and experts ~ ~ ~

  I want to do below.

  1. There is a vi, including 1 string D of the control panel and light.

    

  2. make this dll with Build Specification - Shared Library (DLL) vi.

  

  definition of function in the header file is below.

  --> Dbl1d_array void __cdecl (LStrHandleArray * inStr1d, LStrHandleArray * outStr1d);

  definition of LStrHandleArray is

  typedef struct {int32_t dimSize;}

  LStrHandle String [1];
  } LStrHandleArrayBase;
  typedef LStrHandleArrayBase * LStrHandleArray;

  3. you want to use this dll in new vi.

  • call the library feature - configure... - Select the file created above dll and function name parameter:

       

  --> Setting tab

    

  ??? What type and what format should I choose to LStrHandleArray * inStr1d in the header file for dll?

  Help ~!

  Thank you.

  The parameters are strings of paintings of LabVIEW. If you simply create an item of this type on the diagram, it wire to the parameter according to configured as Adapt to the Type. But do not use the data in the table

  pointer, but rather a pointer to table manage.

• Import the Javascript library as a static file not work but working from URL

  Hi, I need to use the oCanvas library: download - oCanvas - oriented drawing canvas object in a page.

  I followed this guide: filing of APEX JavaScript static file

  I've downloaded the library and the updloaded in sharing of components/static files and referenced in the page header:

  < script src = "" #APP_IMAGES #ocanvas.js "type =" text/JavaScript"> < / script >"

  On the page, I created a html subregion and in the body, used the following test code:

  < canvas id = "canvas" width = "200" height = "100" > < / canvas >

  < script >

  output function (label, entry) {}

  var out = document.getElementById ("output"),

  input_string = ' ", i, number;

  If (typeof input = 'object') {}

  input_string += "{\n";

  for {(i input)

  number =! isNaN (parseFloat (input [i]))? true: false;

  input_string += ' < span class =------"tab\" > \t </span > ' + i + ":" + (number? ' ")". " "': ' \ '") + input [i] + (number? "": "\" "") + "\n";

  }

  input_string += '} \n ";

  }

  out.innerHTML += (out.innerHTML = ""?) ("": "\n") + label + input_string;

  }

  var c = document.querySelector ("#canvas"),

  CTX = c.getContext ("2d");

  c.Width = window.innerWidth;

  c.Height = window.innerHeight;

  c.addEventListener ("touchmove", function (e) {e.preventDefault ()}; false);

  var canvas = oCanvas.create ({canvas: "#canvas", the decoration: "#222" "});

  Planet Center

  Var Center = canvas.display.ellipse({)

  x: canvas.width / 2, y: canvas.height / 2,.

  RADIUS: canvas.width / 20,.

  fill: "#fff."

  ({. add()});

  Prototype that will be used to instantiate other objects

  var satelliteProto = canvas.display.ellipse ({fill: "#eee"});

  var pathProto = canvas.display.ellipse ({stroke: "1px #999"});

  Implement data

  satellites of var = [], depth = 3;

  var satelliteColors = ["#107B 99", "#5F92C0", "#c7509f"];

  var pathColors = ["#666", "#107B 99", "#5F92C0"];

  Create seven satellites and access roads. Definition is longer down.

  for (var i = 0, l = 7; i < l; i ++) {}

  createSatellite({)

  parent: focus, depth: 1,.

  distance: (i + 1) * canvas.width / 6,.

  RADIUS: canvas.width / 100,.

  Speed: 1

  });

  }

  Set up a tick function that moves all satellites each image

  canvas.setLoop (function () {}

  for (var i = 0, l = satellites.length; i < l; i ++) {}

  satellites [i] .rotation += satellites [i] .speed;

  }

  });

  Definition of a satellite and its corresponding path

  function createSatellite (options) {}

  Create the path which will follow the satellite

  var path = pathProto.clone({)

  Ray: options.distance,.

  x: options.x | 0, y: options.y | 0,

  strokeColor: pathColors [options.depth - 1]

  });

  options.parent.addChild (path);

  Create a new satellite

  satellite var = satelliteProto.clone({)

  origin: {}

  x: 0,.

  y: options.distance * (Math.round (Math.random ())?-1: 1)

  },

  Speed: Math.Random () * (2 * Math.Random () - 0.5) + 0.5,.

  Ray: options.radius,.

  x: options.x | 0, y: options.y | 0,

  filling: satelliteColors [options.depth - 1].

  rotation: Math.Random () * 360

  });

  options.parent.addChild (satellite);

  satellites.push (satellite);

  Create another satellite which will tour around the hub

  If (options.depth < depth) {}

  createSatellite({)

  parent: satellite, depth: + 1 options.depth,

  distance: options.radius * 7.

  RADIUS: options.radius / 1.5,.

  x: satellite.origin.x *-1, y: satellite.origin.y *-1;

  Speed: 10

  });

  }

  }

  Implement control of play/pause for the demo

  var text = canvas.display.text({)

  x: canvas.width / 2, y: 220,.

  origin: {x: 'Centre', y: 'Center'},

  filling: '#fff', size: 25, weight: 'bold', text: 'Play '.

  ({. add()});

  Canvas.bind ("click tap", function () {})

  Text.Text = canvas.timeline.running? 'Play': 'Pause '; Canvas.Redraw ();

  Canvas.Timeline [Canvas.Timeline.Running? "stop": "start"] ();

  });

  < /script >

  That does not work, but if I change reference from the page to the next header it works:

  <script src="http://cdnjs.cloudflare.com/ajax/libs/ocanvas/2.7.2/ocanvas.min.js"></script>

  What can I do to use the static reference correctly?

  It's a library problem?

  I created a test workspace, there are two pages with the static reference and the other with the URL reference, here's the connection info, if you want to try it:

  https://Apex.Oracle.com/pls/Apex/f?p=4550:1:0:

  workspace: ocanvas

  user: user

  Pass: ocanvas

  Thank you for your time.

  The file you have downloaded seems to have some formatting problems (missing CR/LF?).   I downloaded the same file from the remote site and referenced and it works.  Also, you can simply reference the file in the page URL of file header instead of add field tags in the html header scripts.

  -Jeff

• Call the library feature not filling in DLL functions

  I have a DLL (written in VB) who controls some 3rd party hardware.

  They have some (very bad) documents that has a few functions in the DLL as well as input parameters.

  I am using the library function node call in LabVIEW to open the DLL so I can take care of everything in LabVIEW, but for some reason it is not properly populating the list of the functions of the DLL. When I browse to the DLL and fall to the bottom of the list of functions, all I get is this

  

  Those who are not functions in this DLL. In fact, if I go to any DLL in the folder, they gave me, these same 4 functions are listed every time. I'm doing something wrong?

  According to me, this indicates that your DLL is actually an ActiveX, not a standard DLL object.  Drop Automation open on your diagram, create a constant for the Refnum Automation of entry, right click, select ActiveX class...-> go, then click on the Browse button in the dialog box (it may take a while to open) and find your DLL file.  See if that gets you a list of objects in the DLL.

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• have library ebooks, managed to get one on my ereader but not the rest. What should I do

  How to transfer e-books to the library in ereader. A managed, can not do it again.

  Hi Barbara,

  Please follow the steps from here: OverDrive | How to transfer eBooks to an eReader usi...

  Thank you

  Abhishek

• How to add a button with Javascript library

  Hello

  I am using Captivate 5.5 to create a template.

  In the files that will be created by using this template, we will add a button that executes a Javascript script. Now my question is, given that this button will be used across multiple slides in the file, I can add this button (with the Javascript code) to the library? We currently create manually everytime.

  We do not have a programmer on our team, so that we cannot create the widget. Is there another way?

  Thanks for your help.

  Anthony

  Why do you need to remove the slide?

  I have a white blank slide at the beginning of all my modules of Captivate. There are some issues that appear to be avoided if the first slide has nothing about it.  You don't have to do this very long slide.  Usually mine are just a second, in the long term.

• insertion of an element on a page using Javascript library

  Hello

  I have a library with 6 different layouts in it.  I have to be able to put them on the page from an external program.  I have all my code instead of send commands to Indesign, but I do not know how to reference the library items.  I can reference them by name?  So, I would that my external custom application to be able to enumerate all the items in the library, so that the user can select only one to insert.  I'm at a total loss as to how to do so.

  I need help with these two things:

  (1) obtain a matrix, or a list of all items in a particular library, which is already open.

  (2) once I have the list of library items, I need to be able to place one or more on the maintenance of the page follow them so I can place images and text in the appropriate boxes.

  Any help with this would be greatly appreciated.  I use Indesign CS3 and my external application is coded in Objective-C on a Mac.  I prefer the Javascript as I'm very familiar with it, as opposed to Applescript.

  Thanks for any help provided.

  Dave Williams

  Back in the day when I wrote this page (it was written for CS), I thought that learning to work with libraries and assets would be the door to cooperation with any objects because the principles are the same, it's just the details that are different.

  I'm glad it helped you.

  myNames = myLibrary.assets.everyItem () .name;

  will give you the names of each asset in a library in a table. You can then use:

  myLibrary.asset.item (myNames [n]);

  to get the nth active, even if it only works if all the library assets have unique names - which will only be possible if the user applies the appropriate discipline.

  Dave

• How to pass a variable value to a Manager click for a function of ACEs?

  I wish I could click a button, pass a value to a variable, then pass this variable to assess within the case routine.

  MXML:

  Click = "someClickHandler (Event);    <!- like the variable to prepare you with the click-> handler

  AS:

  public void genericFunction(event:MouseEvent):void

  {

  Switch (VariableName)

  {

  CASES1:

  action;

  Action2;

  break;

  CASE2:

  action;

  Action2;

  break;

  .

  .

  .

  caseN:

  action;

  Action2;

  break;

  }

  }

  Thank you.

  The click handler is your function to set how you want.

  MXML

  a click = "someClickHandler (event, 5).

  AS

  public function someClickHandler (event: MouseEvent, someVar:int): void

  {

  switch (someVar)

  ...

• Launch the javascript from a plugin C++ function

  Hello

  I managed to run a javascript from my c code file ++ but I want to go directly to a specific function.

  I used IScriptUtils to get a result Oracle

  WideString scriptPath ("/ path/myscript.jsx ');

  ScriptFile (scriptPath) IdFichier ;

  InterfacePtr<IScriptRunner> scriptRunner (Utils<IScriptUtils> ()->QueryScriptRunner(scriptFile));

  if (scriptRunner)

  {

  ScriptRecordData arguments;

  ScriptID aID;

  ScriptData script (scriptFile);

  ScriptData resultData;

  PMString errorString;

  result = Utils<IScriptUtils> ()->DispatchScriptRunner(scriptRunner, script, arguments, errorString, resultDatakFalse);

  ...

  ScriptData:ScriptDataType aType = resultData. GetType();

  }

  I would like to know if someone has managed to launch a function javascript with arguments and a result.

  Kind regards

  David

  Simple solution: create another script that simply work calls for the second.

• Node function of library under Linux - features not found

  Hello

  I am developing a VI in LabView 7.1 2.6 Linux (Fedora Core 6) that needs to call a library function that I have developed. I believe that there are no errors in the code in the library or in the way the VI went, but LabView or can not use this library. Whenever I open my VI, he asks me to locate my library and when I point the LabView library, it all just cannot open it will ask me where is the library. If I chose to ignore it and continue loading the VI, once I double-click on my node library function and point LabView library error I get 'Can't load/search library' changes to "Library does not have the requested function". I coded the entire library in C and it built as follows:

  GCC-fpic shared - c EncoderLib.c

  LD g o libencoder.so EncoderLib.o - lphidget21

  Here, the - lphidget21 option is to post a link to a library I develop a wrapper of LabView for. This isn't the EXACT method mentioned in "Chapter 6: using external Code in LabView", but it is still close enough. I failed to get my library to compile in a statement. I'm unable to locate the document I'm referring to this time, but I think I got it somewhere on the Web site of NOR. In any case-maybe I'm linking or building this library incorrectly? I checked to make sure that the library contains indeed the function I am trying to call from LabView using "nm" Linux command line function. The result is as expected:
  $ nm libencoder.so
  TRUNCATED IN ORDER TO SEE THE PART IMPORTANT *.
  00000614 T NumEncodersAttached
  0000053 did PollPosition
  0000059b T PollRotations
  000004e8 T SelectAxis
  000005c 6 T SetPosition

  The listed functions are functions that I try to call, so they are definitiely in the library and even for some reson LabView can not find them! I was just tickled pink, if anyone has any ideas on how to solve this problem. If anyone has compiled and used a Linux library function node before, I'd love to hear about your experience and if you have had problems. Someone has to meet this problem before?  Any help is greatly appreciated. Please let me know if I can offer more information.

  Thank you all!

  -Andy

  Hey Charlie,

  Linux is not any sort of error handling capabilities. Thanks for the good suggestion, if. I finally understand it. LabView was very, very unhappy with the function toUpper, despite the fact that he lives in the standard library of C I pulled out the function and the library worked like a charm. I don't know if this is a mistake made by my (standard gcc for linux) compiler or if it is an error in LabView, but anyway it's probably something that users should know. Hope this helps someone in the future.

  Thanks for all the assistance, Charlie,

  -Andy