JAX - RS Web service-deployment problem

Similar Questions

• The unauthorized JAX - RPC web service client?

  I try to call a 3rd web service part using a WSDL I can't control.  I was unable to send requests by using a style JAX - WS client and errors have led me to believe that this was due to the WSDL using the RPC/Document model.  Checks showed there is, in fact, the primitive methods of return base schema.  My understanding is that I have to use a JAX - RPC client in this case.

  JDev generated successfully objects, but I got whitelist errors that I have deployed in the cloud.  Basically, any class that referred to java.rmi failed (as documented) - and that's almost all main objects for the customer.

  Is there a way around this problem?

  • Is there another method to generate JAX - RPC clients?
  • The cloud is possible to accept the java.rmi. * classes?
  • Is there a way to force the web services JAX - WS upset WSDL RPC/Document?

  Thank you

  Alex

  I do not think that RPC is supported, see unsupported features and API which States:

  Feature not supported	Alternative
  Web services based on JAX - RPC.	Convert in JAX - WS web services.
  Remote invocations with a transport protocol other than HTTPS (including the HTTP text).	Does not apply.

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• Web service deployment failed

  Recently, I decided to make a Web server along with my design "currentdensity.vi" to have access to the data via Solution Explorer. I read the instructions for the Web server configurations, but I still have the problem in the correct implementation of it. I'm scared, I left a few simple steps or advice to do it successfully. (http://localhost: 8080/webservice1)---> but no result
  Please give me your feedback.

  Hello

  Can I know what version of LabVIEW you use? Deploying the web service on a desktop computer or a laptop? If it is a laptop, you can disable the WiFi card and try to deploy again?

  Kind regards

  Alan

• Web service deployment error

  Hi all!

  I created a Web Service to a VI. This VI has two values of entries: a string and and Int8 and a single output: an array of values (1 x table 3) DBL. The inputs and outputs are well connected via the connector pane.

  For example, in the project > unchanged to build, I created WS, built with the advanced > use LabVIEW 8.x file layout option checked, in the dialog box settings WebService (RESTful). The problem appears when I try to deploy this WS. The following error is displayed:

  Error LabVIEW:  (Hex 0xFFFEF84D) LabVIEW Web Services: An error occurred when extracting the deployed Web service. Rebuild the Web service by selecting the "Use LabVIEW 8.x file layout" option in the Advanced tab of the web Service properties dialog.
  

  How can I solve this problem?

  Thank you!

  
  

• Web service invocation problem

  Hello
  I have a problem when the .net web service consumption. This web service expects xmlobject that I create using < cfxml > tags. I used < cfinvoke > and CreateObject without success.
  First of all, I am getting following error message: java.lang.IllegalArgumentException: argument type mismatch
  When I update several times (15 or almost) I get following error message: java.lang.IllegalArgumentException: java.lang.ClassCastException@1645559. I don't know where is the problem.
  
  Thank you
  Mark

  Just realized we have been stolen around for nothing. There is still no universal standard for the passage of XML as arguments to the Web service methods. ColdFusion has its own, as do .NET and Java.

  The single currency among all web services is SOAP. Therefore, a universal way to pass XML from any client to a web service on any platform, is like a SOAP document.

  In your case, you want to make a SOAP document that includes your XML file. You could then move it to the web service using . I googled and found an fully developed for example in houseOfFusion.

• WCF web service synchronization problem

  I created a WCF web service is hosted on IIS. It does the job of recovery of an oracle database file path, locate the same on the server and extractions is content using ftp. The method exposed by the service as a contract returns data in bytes. But it takes more than five minutes to complete the whole process, when I call the web service from a windows application, acting as a client. Good person to want to help me out of this.

  file app.config on the client side:

  <>

  XML version = "1.0" encoding = "utf-8"? >

  Configuration >

  system.serviceModel >

  links >

  wsHttpBinding >

  "' binding name ="WSHttpBinding_IFlashingService"closeTimeout ="00:01:00 "openTimeout =" 00:01:00 "receiveTimeout =" 00:10:00 "sendTimeout =" 00:01:00 "BypassProxyOnLocal for ="false"transactionFlow ="false"hostNameComparisonMode = maxBufferPoolSize"StrongWildcard"="524288"maxReceivedMessageSize = messageEncoding"100000000"="Text"textEncoding ="utf-8"useDefaultWebProxy ="true"allowCookies ="false">

  readerQuotas maxDepth = "32" maxStringContentLength = "8192" maxArrayLength = maxBytesPerRead "100000000" = "4096" maxNameTableCharCount = "16384" / >

  reliableSession ordered = "true" inactivityTimeout = "00:10:00 am" enabled = "false" / > "

  security mode = 'Transport' >

  transport clientCredentialType = "None" proxyCredentialType = "None" realm ="" / >

  message clientCredentialType = "Windows" negotiateServiceCredential = "true" establishSecurityContext = "true" / >

  Security >

  link >

  wsHttpBinding >

  links >

  client >

  endpoint address =https://ed.FlashingStore.com/FlashingService.svc binding = "wsHttpBinding" bindingConfiguration = "WSHttpBinding_IFlashingService" contract = "FlashingService.IFlashingService" name = "WSHttpBinding_IFlashingService" > "

  identity >

  DNS value = "localhost" / >

  identity >

  endpoint >

  client >

  system.serviceModel >

  Configuration >

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums.

  Please ask your question in the following forum.

  Windows Communication Foundation (WCF) Forum:

  http://social.msdn.Microsoft.com/forums/en-us/WCF/threads

  Concerning

• Web Services activity problem insert with a link to the child records contacts

  Hi - I am using WS 2.0 to insert a new activity and bind it to a list of contacts. I converted this to 1.0 of WS. It works fine without contact, the linking of code but fails with the following message when linking to contact records...
  
  Update operation on the 'Activity' integration component failed because no record corresponding in the 'Action' business with the specification of the research component "[Description] = 'Test2' ' could be found." (SBL-EAI-04403)
  
  Here is a simplified version of the code in question...
  
  activity2. Law on activity is new activity2. Activity();
  Act. URL = cs.crmSessionUrl;
  activity2. Entry ActivityInsert_Input = new activity2. ActivityInsert_Input();
  entry. ListOfActivity is new activity2. ListOfActivityData();
  entry. ListOfActivity.Activity is new activity2. ActivityData [1];
  entry. ListOfActivity.Activity [0] = new activity2. ActivityData();
  entry. ListOfActivity.Activity [0]. Object = "Test2."
  entry. ListOfActivity.Activity [0]. Activity = "Task";
  entry. ListOfActivity.Activity [0]. Status = "done";
  entry. ListOfActivity.Activity [0]. Type = "Email";
  entry. ListOfActivity.Activity [0]. DueDate = DateTime.Parse (DateTime.Now.ToString ("dd/mm/yyyy hh: mm; :")) "))
  entry. ListOfActivity.Activity [0]. AccountId = "AEGA-BGV8Z9";
  entry. ListOfActivity.Activity [0]. ListOfContact is new activity2. ListOfContactData();
  entry. ListOfActivity.Activity [0]. ListOfContact.Contact is new activity2. ContactData [1];
  entry. ListOfActivity.Activity [0]. ListOfContact.Contact [0] = new activity2. ContactData();
  entry. ListOfActivity.Activity [0]. ListOfContact.Contact [0]. ID = "AEGA-CCMEWM";
  activity2. ActivityInsert_Output output is law. ActivityInsert (input);
  
  Any suggestion would be great!

  Try using run instead.

  
  xmlns:ns = "" urn: crmondemand/ws/ECB/activity/10/2004 ""
  container = "http://www.w3.org/2001/XMLSchema".
  xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
  xmlns:WSSE = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd".
  xmlns = "" urn: / crmondemand/xml/activity/Data ">"
  
  
  
  yourusername
  yourPassword
  
  
  
  
  
  
  
  Test7
  ALA-5KC0OV
  E-mail
  Completed
  Task
  
  
  AALA - 5851K 0
  
  
  
  
  
  
  

  
  
  
  
  
  2012-06-07 T 01: 00:09Z
  2012-06-07 T 01: 00:09Z
  ALA-583LBZ
  ALA-583LBZ
  1
  ALA-5TG95O
  Services Web administrator, 06/06/2012 18:00:09
  Services Web administrator, 06/06/2012 18:00:09
  
  
  2012 03-19 T 20: 19:55Z
  2012 03-05 T 21: 43:14Z
  ALA-583LBZ
  ALA-583LBZ
  79
  AALA - 5851K 0
  Web Services Administrator, 05/03/2012-13:43:14
  Web Services Administrator, 05/03/2012-13:43:14
  
  
  
  
  
  
  

• Using https with proxy in WebLogic 10.3 and Jax - WS (Web services).

  Hello world! Hello!
  I'm trying to configure a proxy in a Https Jax Ws connection. I get problems to set up the Proxy authentication.
  
  This is the situation, I deploy a web project, which I have in the file. WAR in WebLogic. In this project, I have configured a class called utils. Authenticator. The code is the following:
  
  */**
  * To change this template, choose Tools | Models *.
  * and open the template in the editor.*
  **/*
  package-utils;
  
  Import weblogic.common.ProxyAuthenticator;
  
  */***
  ***
  * @author X31296CA *.
  **/*
  * Authenticator/public class implements ProxyAuthenticator {*}
  
  public void init (String proxyHost,
  proxyPort int,
  String AuthType,
  * String loginPrompt) {*}
  
  *}*
  
  * public String [] getLoginAndPassword() {*}
  Connection string [] = new String [2];
  Login [0] = "user";
  Login [1] = 'password ';
  Returns the user name;
  
  *}*
  
  Also, when I run the Jax - WS, prior to that, I try to configure the proxy with the following lines:
  Properties p = System.getProperties ();
  p.put (ProxyAuthenticator.AUTHENTICATOR_PROPERTY, "utils. Authenticator");
  p.put ("weblogic.net.proxyAuthenticatorClassName", "utils. Authenticator");
  System.setProperties (p);
  
  The exception I get is:
  
  
  weblogic.net.http.HttpUnauthorizedException: Proxy authenticator utils. Authenticator failed: java.lang.ClassNotFoundException: utils. Authenticator
  * to weblogic.net.http.HttpURLConnection.getAuthInfo(HttpURLConnection.java:346) *.
  * to weblogic.net.http.HttpsClient.makeConnectionUsingProxy(HttpsClient.java:439) *.
  * to weblogic.net.http.HttpsClient.openServer(HttpsClient.java:350) *.
  * to weblogic.net.http.HttpsClient.New(HttpsClient.java:518) *.
  * to weblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:239) *.
  * Truncated. check the log file full stacktrace *.
  *}*
  
  Please, any ideas?
  
  Thanks in advance,
  
  Jaime,

  Hello

  Try this option in your startup script, and try again.

  -DUseSunHttpHandler = true

  Kind regards
  Kal

• XML Web services configuration problem

  WHEN RUNNING

  long value 500

  set pagesize 100

  XQUERY declare default element namespace " " http://xmlns.Oracle.com/xdb/xdbconfig.xsd "; "

  for $doc in fn:doc("/xdbconfig.xml")/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-liste/servlet [servlet-name = "orawsv"]

  return $doc

  I GOT AN ERROR

  Error from line 3 in order:

  Select column_value xmltable (' declare default element namespace "http://xmlns.oracle.com/xdb/xdbconfig.xsd"; "")

  for $doc in fn:doc("/xdbconfig.xml")/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-liste/servlet [servlet-name = "orawsv"]

  return $doc')

  Error in the command line: 4 column: 146

  Error report:

  SQL error: ORA-02000: lack of keyword COLUMNS

  02000 00000 - "missing %s keyword."

  Please help, I need configuration db xml

  Still, I get the same error I asked when I try to run the same script with sql developer.

  OK, you are using SQL Developer.

  Replace quotes simple quotes here:

  servlet-name = "orawsv".

  It should now work without error, but you end up with this:

  COLUMN_VALUE

  ----------------------

  (XMLTYPE)

  which is not very useful.

  So you should better use XMLTable first:

  SELECT xmlserialize (happy column_value)

  FROM XMLTable)

  XmlNamespaces (default 'http://xmlns.oracle.com/xdb/xdbconfig.xsd'),

  "for $doc in fn:doc("/xdbconfig.xml")/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-liste/servlet [servlet-name ="orawsv"].

  return $doc '

  ) ;

• deploy the web service to xp embedded

  Hi all

  I struggle to run a web service on an xp embedded system. The web service works very well in my LV 2011 development environment and I have created an installer for my main application it is the lvws file is included as described in web services FAQ:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7747#toc12

  After the installation on the target computer, I can't access the web service. Also if you call localhost:3580, then I get an access error.

  But in the System Control Panel administrative tools, I can see that the server system OR like many Web server OR Web applications are started.

  For further investigation, I added the 'Distributed System Manager' to my Installer. With this tool, I see that all my web services deployed on my development system, but on the XP embedded system with TEN target is listed.

  I installed my application for a professional reference XP system to exclude that the problem is caused by embedded XP. But the behavior is exactly the same. So far, I tested only local so that settings security like firewalls and ports system should pose no problems. But to be sure I have disabled the firewall without success... I can't access the Web service. I have often found the suggestions in the forum to check if the web service is enabled. But I am not already and then access to http://localhost:3580.

  Any ideas?

  Thank you!

  This help document is somewhat outdated.

  You see 2 different problems: 1) you can not display the Configuration utility and do not install Web using localhost:3580 2) your web service monitoring.

  For the first number-->

  You probably did not understand the "Interface Web NI 2011 infrastructure" in your Setup program.  The doc to help you mentioned does not tell you to do, because it is not necessary for your web service works. However, if you want to change one of the settings of your web server after the installation, you will need this extra setup program.

  For the second question-->

  You probably didn't get your Spec to build Web services as a source file in your Setup program.  The help doc says to put your LVWS file as your installation source, but this is not correct. You must include the technical article to build real web service as a source file (not the web service create out of spec files, like LVWS).

  Let me know if any of these will help you.

  -Jared

• Deployment of Web Services has failed. Web applications server OR still load.

  I installed LabVIEW 2013 and I am trying to publish the web service. Every time I try, I see this message: "unable to Web Services deployment. The Server Web applications OR load again. »

  I don't know how to stop or complete this loading. I have reinstalled LabVIEW 2013, removed LV 2012 and other software. In addition, when I restart the 32-bit server, I have old web services installed. Even if I do not publish them, they appear after the transition to 64-bit-> 32-bit server.

  I will be grateful for your help.

  Peter

  Hi all

  It was a problem introduced with the new deployment of LabVIEW web services in 2013, specifically on laptops (classified as CAR 422680). It is fixed in the patch of f1 2013 LabVIEW. This patch is available for download here and you can get more information about the patches in the patch here. The patch will travel via Service Update OR later this month.

  Kind regards

  Jeff Peacock

  Product Support Engineer | LabVIEW R & D | National Instruments

• Services Web site deployment error "server returned nothing (no header, no data)" and much more

  I develop a VI on a large scale with a VI of web service combined in 2010 SP1. The "auxiliary" VI is responsible for storage of data capture and analysis as well as data and communications. It's big enough and communicates with the web method VI through shared network variables [and I use the DSC module to allow the management of shared variables of events].

  I can build and deploy the web method VI very well and it runs great. However, I need to communicate between the auxiliary and web method VI, and it seems that I can't do without including the auxiliaries vi when generating RESTful web services [also, is there a way to make this web service generates?]. When I added the auxiliary vi for the construction, he built very well, but then I got during deployment:

  "Server returned nothing (no header, no data).

  The next time I tried to deploy, I got a fake NI Auth dialog by this knowledge base article. By following the instructions for case 1 ["failure of Web application server since last started"], I ran Services.msc and found that NEITHER Application Web Service was not running. I tried to restart the service, but got this error:

  "The NI Application Web Server service on Local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the service logs and alerts. »

  Knowledge base article suggests to restart at this point and I did, but I still see the same behavior. So really, I have a few questions:

  1. is it possible to deploy a variable library shared on the network through a local web service deployed and VI?

  2. What are the causes "server returned nothing (no header, no data)" in the deployment? A google search gave very little.

  3. what this means: "NI Application Web Server service on Local computer started and then stopped... '. "and what do I do to get my Web Application Server up?

  [to pile on the pile... I tried to re - activate the localhost:3580 Web application server and got an error. Localhost:3580 then offline also.]

  Thank you!

  Update.

  I noticed that the Web application server attempted to deploy the web service broken and choke her. There seemed to be no way to clear the .lvws created at the origin of the construction. I was able to remove the deployment folder to \UserServices\deployed\ $(WebServicesRoot)- , but it has been recreated from the .lvws whenever I tried to restart the service.

  So I called NOR and they told me this directory [XP]:

  C:\Documents and Settings\LocalService\My Documents\LabVIEW Data\WebServices\Standalone

  The .lvws has been in this folder. I deleted it and now I can run the ApplicationWebService. Apparently this file hidden undocumented is a "not-quite-bug" that is recognized as needing a fix in future releases.

• "Problem connecting to the Server Web Services." - HP Envy 100

  Hello world

  I wonder if anyone has the same problem as me. I just got a HP Envy 100 and went through the process of setting up without problem. The printer is connected via Wi - Fi for wireless network, I can ping the printer from my Mac successfully and I can print within the network without problem.

  However, regarding ePrint and Web features, it seems that nothing really works. I can't even turn on Web services, I always get the message "problem connecting to the Web Services server.

  I tried the following:

  -Restart the router and printer

  -Change the manual IP address and manually set the DNS server

  -Reapply automatic IP and set the Google DNS (8.8.8.8 and 8.8.4.4) servers

  .. .with no chance whatsoever. If this is a problem with the firmware (from what I understood, I do not have the latest firmware, but I can't ask her update, because it requires, you guessed it, a connection on the server of web services, that is the whole of the problem.)

  Anyone else having the problem? Everyone had it and fixed it? Is this just a temporary problem with HP servers?

  Thanks in advance!

  Hey, for me it works as well, and I didn't, just retried that I had tried before and it connected to the Web Services without problem.

  So I think it's safe to say that the original problem in this topic only lied to a HP Server-side problem. Not cool it took so long for them to solve and in particular the fact that we did not really have feedback appropriate about the problem.

  Anyway, I solved (for now, at least).

• Compression SSL Web service problem

  I'm trying to consume a .NET web service in ColdFusion via SSL, and I have serious problems. I know that the URL is correct, because I can navigate through the WSDL file using my browser. Errors and my research, it seems that the problem might involve http compression on the server hosting the web service. I saw a few alternatives for CFHTTP using custom HTTP headers, but I wasn't able to find a way to get something to work with a web service call. Any ideas? ColdFusion only incompatible with webservices using HTTP compression?
  
  Here is the summary of the problems:
  
  (1) I can't save the WebService in CF administrator - when I try, I get the error:
  Service web creation by mistake. Please ensure that you have entered a Web Service name or the correct URL.
  
  (2) when I try to consume the web service in the CF, I get the following error:
  Could not generate objects stub for the call to the web service.
  Name: https://www.travelinsured.com/TIWebServiceQA/service.asmx?wsdl. WSDL: https://www.travelinsured.com/TIWebServiceQA/service.asmx?wsdl. java.util.zip.ZipException: unknown compression method It is recommended that you use a web browser to retrieve and examine the requested WSDL document of accuracy. If the WSDL document you requested cannot be found or it is generated dynamically, it is likely that the web service target has programming errors.
  
  (3) just to be sure, I recorded the last certificate for the secure site, I am trying to access it in the Keystore of Java from ColdFusion.
  
  I saw similar topics in the forum before involving web services and SSL, but nothing about HTTP compression. Anyone had this problem before? All the patches?
  
  Thank you!

  A useful poster on the forums of the House of Fusion showed me a work around:

  Apparently, ColdFusion uses only the WSDL to create objects to sub for the web service call, so as long as there is a service port address specified in the WSDL file it does not matter where to seat the actual WSDL file. So I just download the WSDL using CFHTTP (had to use this article to configure CFHTTP to the HTTP Compression: http://www.talkingtree.com/blog/index.cfm/2004/7/28/20040729) and then I reported my administrator SEE the WSDL on my local machine. And Presto - I can connect to the web service without problem now.

  Only problem is that I have to download the WSDL, whenever there is a change to the Web service, but I can schedule a task that downloads the file once a week or more.

• Fail to create the web service with the type of data defined by the user using the jwsc Ant task!

  Hello everyone!
  
  I used JAXWS to create WSDL from a file of Jehovah's witnesses.
  
  It's my TJ:
  -----------------------------------------------------------------------------------
  package ws;
  
  Import javax.jws.WebService;
  Import javax.jws.WebMethod;
  ws import. MyDataType;
  
  *@WebService*
  * public class MyWebService {*}
  public MyWebService()
  *{*
  *}*
  *@WebMethod*
  public MyDataType MyWebMethod (MyDataType mdt)
  *{*
  * / / mdt.setS ("I got it!"); *
  return mdt;
  *}*
  *}*
  -----------------------------------------------------------------------------------
  
  
  and this is my type of data:
  -----------------------------------------------------------------------------------
  package ws;
  
  * public class MyDataType {*}
  
  
  String ^ s;
  public MyDataType()
  *{*
  
  *}*
  * public String getS() {*}
  return s;
  *}*
  
  * Sets public Sub (String s) {*}
  This.s = s;
  *}*
  *}*
  -----------------------------------------------------------------------------------
  
  
  
  and that's my Ant build.xml
  -----------------------------------------------------------------------------------
  * < by default of the project = "all" > *.
  * < property name = "weblogic.jar.classpath" value="D:/Projects/bea103/wlserver_10.3/server/lib"/ > * "
  * < taskdef name = "jwsc" classname = "weblogic.wsee.tools.anttasks.JwscTask" > *.
  * < classpath > *.
  * < path id = "weblogic.classpath" > * "
  * < pathelement path = "WEBLOGIC_HOME" / >. *
  * < fileset dir = "${weblogic.jar.classpath}" > *.
  * < include name = "weblogic.jar" / > *.
  * < / fileset > *.
  * < / path > *.
  * < / classpath > *.
  * < / taskdef > *.
  * < target name = "all" depends = "clean, build-service" / > *.
  * < name target 'clean' = > *.
  * < delete dir = "output" / > *.
  * < / target > *.
  * < name target = 'build-service' > *.
  * <!-add jwsc and related tasks here - > *.
  * < jwsc srcdir = "" destdir = "wsoutput" > * "
  * < jws file = "MyWebService.java" type = "JAXWS" / > * "
  * < / jwsc > *.
  * < / target > *.
  * <!-< target name = "deploy" > - > <! - add wldeploy task here - > <!-< / target >-> *.
  * < / project > *.
  -----------------------------------------------------------------------------------
  
  I have run the Ant task, but I get this error:
  -----------------------------------------------------------------------------------
  BuildFile: build.xml
  
  clean:
  
  build service:
  [jwsc] TJ: processing module /MyWebService
  [jwsc] The analysis of source files
  [jwsc] The analysis of source files
  [jwsc] 1 TJS files processing for the module /MyWebService
  * [jwsc] [JAM] WARNING: could not resolve class MyDataType *.
  [jwsc] TJ: C:\Documents and Settings\samimi\IdeaProjects\SampleWebService\src\ws\MyWebService.java valid.
  [jwsc] Treatment of the web services JAX - WS 1...
  * [jwsc] error: couldn't get TypeDeclaration for: MyDataType apt tour: 1 *...
  ...................
  BUILD FAILED
  C:\Documents and Settings\samimi\IdeaProjects\SampleWebService\src\ws\build.xml:
  19: weblogic.wsee.tools.WsBuildException: JAX - WS web services processing error
  -----------------------------------------------------------------------------------
  
  Please help me solve this problem.
  Thank you
  Mojir

  I tried to compile your source code and received the same exception.
  However after compiling the MyDataType.java before running the jwsc task, I was successfully able to build the service.

  Please try the ant script below and let me know the result:

  **
  *     *
  **

  
  
  <>
  srcdir = "${source.dir}" "
  DESTDIR = "${Build.dir} '"
  keepGenerated = 'true '.
  classpath = "${Class.Path} '"
  Debug = 'true '.
  verbose = "false" >
  
       

  
            
  

  Thank you
  Sandeep