Similar Questions

• Windows update takes too long to find the updates

  I had just installed a new hard drive on my laptop Dell inspiron N5050. I did a reinstall of system clean of my operating system to windows 7. After that, I started to run windows update to get all the necessary updates that I need to update completely from the computer. He has worked for a very long time with no result. In addition, at least 2 hours. all the settings for windows update is set to the settings recommended. but for some reason, in my view, takes too long to get updates. can someone help me please this possible issue

  Hello Darrin,

  Thanks for posting your query on the Microsoft Community.

  According to the description, the Windows updates take a long time to find the updates.

  I suggest to follow the methods below and check if that helps.

  Method 1: If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooter.to of update of Windows the problem fix. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Reference:

  Open the Windows Update troubleshooting tool

  If the problem persists, try Method 2,

  Method 2: run the clean boot: Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  See also:

  Problems with installing updates

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Takes too long to refresh the windows on Windows XP

  Dear all

  I have a problem with my win Xp. When I update my windows, this radia too long. How we can solve this problem. I have 2 GB of ram and Dula Intel core pro.

  and one more a few windows is automatically stopped.

  If anyone has the same issue please advise me

  Looking forward to your support

  Thank you

  Thanks to your support. Finally I have formatted my PC.  now it's ok...

  Faris

• Update takes too long to install the right until the computer turns off

  Hello!

  I formatted a Windows 7 HP computer, and I was having a bunch of annoying problems related to updated Windows Update (for more than a week, incredible!), more precisely I encountered the problem of the infinite search for updates several times (I formatted in fact the PC more than once), and unfortunately, I have seen no any model when it occurs. I've seen many solutions online, but none of them seem to work. If this computer was mine, I would have already installed another operating system, i.e. Linux.

  Now, after several attempts, the last of them was to start first windows in "safe" mode, and then restart normally, I have observed that, although apparently she wanted so much for the updates, under the windows of Hood put to date has already installed some updates and others have been suspended, and we failed. I decided to restart the PC, and now it is install updates after the newspaper a few hours already. Apparently, he was installing the updates normally, but at some point he stuck with update number 234 (on 292). It was at least 2 or 3 hours, which is to install this update, and I think that it is not normal.

  What can I do? Could it be related to the internet connection? I had a lot of trouble to set up the internet connection, mainly because of the card wireless PC, apparently dying. But I used it, before ending the session, a USB Netgear adapter, and I was able to connect to the internet, etc.

  Thanks for your help!

  I just wanted to say that after waiting a bit more put updated 234 has been installed as well as all the other updates that came after him. Thus, the long waiting times could be due to a problem with internet or any connection simply because the update was quite heavy...

  I'll take a look at this post ;)

• After changing the MagSafe adapter, macbook pro takes too long to start the video

  After changing the map of 85 W MagSafe, time to start the computer has become excessive (2 minutes). The screen lights up immediately, but the video appears after 2 Min.

  Once started, the performance of the computer are OK.

  This anomaly occurs after the change of the adapter, it's never happened before.

  Try a SMC reset:

  https://support.Apple.com/en-us/HT201295

  Ciao.

• InDesign CS5.5 takes too long to process the document text

  I use ID CS5.5 Win 7. I placed a text document in my document. The document contains 126 pages (no text just art). Whenever I have set a tab, the font change, everything about the text ID wedge for a min. I worked on this document for about 6 hours and I make no progress. Any suggestions how I can speed up the process?

  I guess dynamic preflight disabling would be the starting point... followed for dynamic spelling, if you turned it on. (Live Preflight has its own Panel, dynamic spelling is in the preferences).

• Hyperion EPM services take too long to start

  Hyperion 11.1.2.3

  Windows 2008 R2

  32 GB of memory on each server

  Java 1.6.35

  Server environment four (Foundation/FDMEE, planning, Essbase and SQL server).

  Some how it takes too long to start the services of Hyperion. Using the batch script to start all services. Can someone advise where to start looking. Here's the log of HyS9Planning_SERVER-sysout. If this can give an idea

  < 12 February 2014 12:40:34 hours EST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

  < 12 February 2014 12:40:35 hours EST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

  < 12 February 2014 12:40:35 hours EST > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:

  D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\audit-client.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\css.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ctg_custom.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ldapbp.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\opencsv-1.8.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\registry-api.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\wlpool.jar>

  < 12 February 2014 12:40:35 hours EST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 of Oracle Corporation >

  < 12 February 2014 12:41:19 hours EST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 08:52:36 PST Nov 2011 1441050 >

  < 12 February 2014 12:41:43 hours EST > < emergency > < management > < BEA-141151 > < Management Server could not be reached at http://hydevf01.uts.mcmaster.ca:7001. >

  < 12 February 2014 12:41:43 hours EST > < Info > < Configuration Management > < BEA-150018 > < this server will be started in mode of managed server independence in the absence of the admin server. >

  < 12 February 2014 12:41:43 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 12 February 2014 12:41:43 hours EST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log00014. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < Log Management > < BEA-170019 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log server log file is opened. All events in the log server-side will be written to this file. >

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 12573

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storage TP 0 as CN = Entrust .net Secure Server Certification Authority

  TP-1 treatment

  Storage TP 1 as CN = Entrust .net Secure Server Certification Authority 1

  Treatment of TP 2

  TP 2 storing as authority of Certification CN = Entrust .net (2048)

  Treatment TP 3

  Storage of TP 3 in CN = GTE CyberTrust Global Root

  TP 4 of treatment

  TP 4 storing as OU = Secure Server Certification Authority

  Treatment TP 5

  TP 5 storing as UO = class public primary Certification Authority 1

  Treatment TP 6

  TP 6 by storing like UO = class public primary Certification Authority 2

  TP treatment 7

  TP 7 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage of Secret4

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret5

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret6

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret7

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 3941

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storing TP 0 as UO = class public primary Certification Authority 1

  TP-1 treatment

  Storage of TP 1 in CN = GTE CyberTrust Global Root

  Treatment of TP 2

  TP 2 by storing like UO = class public primary Certification Authority 2

  Treatment TP 3

  TP 3 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  < 12 February 2014 12:42:11 hours EST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 12 February 2014 12:42:55 hours EST > < WARNING > < JTA > < BEA-110503 > < migration tool (the AdminServer for JTA manual migration policy, or the captain Singleton for automatic migration JTA strategy) is not available. Jump JTA TRS restoration because isStrictOwnershipCheck is [false]. This may cause corruption of potential TLOG if TRS of Planning0 has been migrated to the backup server and the backup server accesses the TLOG of Planning0. More security can be achieved by setting isStrictOwnershipCheck [true]. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log00030. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log. >

  < 12 February 2014 12:43:01 hours EST > < WARNING > < oracle.dms.jrockit.jfr > < DMS-58041 > < The JRockit FlightRecorder class declares that it is not active and so the DMS cannot use it. >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  Using the OraclePKI provider

  taken javax.net.ssl.TrustManagerFactory supported

  taken javax.net.ssl.KeyManagerFactory supported

  Using the OracleJSSE103 provider

  < 12 February 2014 12:47:37 hours EST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

  < 12 February 2014 12:51:03 hours EST > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon".  There is no such feature. >

  ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.

  On the road: ADF library non-ADFJspResourceProvider after deployment

  Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 16

  null

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with other members in the planning stages. >

  < 12 February 2014 12:51:22 hours EST > < WARNING > < Log Management > < BEA-170011 > < The LogBroadcaster on this server has no messages to the server admin log. The server administrator can not run. Emissions of message to the administrator of the server will be disabled. >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.26.55.119:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:100:7f:fffe:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:385e:468:a776:2aac:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" is now listening on fe80:0:0:0:0:5efe:ac1a:3777:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < Server > < BEA-002611 > < Hostname "HYDEVP01.uts.mcmaster.ca", corresponds to multiple IP addresses: 172.26.55.119, fe80:0:0:0:385e:468:a776:2aac % 14 >

  < 12 February 2014 12:52:24 hours EST > < opinion > < WebLogicServer > < BEA-000358 > < started WebLogic independent server managed by "Planning0" for the domain "EPMSystemHYDEV" running in Production Mode >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < JMX > < BEA-149510 > < could not establish connectivity JMX with the Administration Server AdminServer to < JMXServiceURL:null >. >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,430 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,427 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,429 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:40 hours P.M. > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,428 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,441 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,442 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,443 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,439 for the configured timeout of 5 seconds >

  Do you still have this problem after restarting the server?

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• my laptop takes too long to open photos

  My laptop takes too long to open the pictures.

  It's a HP Pavilion dm4-3055dx, processor Intel i5, 8 GB memory and Windows 7.

  Thank you.

  Hello

  How big are your photos and what application are you using? Where are the pictures? On your computer or card reader? Have you tried opening the photos using the following software?

  http://www.IrfanView.com/main_download_engl.htm

  You can set it as the default Photo Viewer, it has many more functions also.

  Kind regards.

• My daughter Air2 IPad takes too long to save. It is connected to wifi, connected and the screen is locked.mAny advice?

  My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?

  How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• Why it takes too long to open attachments of the e-mail account?

  It takes forever to download attachments from my mail account. I tried to do the following tasks explained on the vista forum: http://windowshelp.microsoft.com/Windows/en-US/help/6b046ae9-1434-4423-9303-400ff6fe686b1033.mspx#ESD, but none of the fixed work possible.

  After clicking on open on the box pop up asking if I want to open or save the attachment, it takes too long to download. The transfer window remains open to showing that he is ready to download, but rest in this window of bhox. I press cancel and try to open once again, if the chance that it opens this file, otherwise it takes forever forceing me to cancel. Very small files most of the time, usually between 50 KB should take seconds.

  I even tried to save the files, but once again the same process. The transfer case remains open but does not download.

  One of the ideas.

  Thanks in advance.

  Hello

  It is not easy to tell exactly what is happening, but it must be something with the e-mail account provider and their page. For me, this case is not a typical problem of Vista, but you can try to find the solution on Vista from Microsoft IT Pro forum.

  By the way: you have an alternative email by another provider address? Is it the same situation?

• After the upgrade of RAM it take too long to begin and start windows.

  Original title: laptop

  Hello

  I have (HP compaq presario V6615EN)
  Core 2 duo 1.83 GHz
  2 GB OF RAM
  Windows vista Home premium 32-bit
  It took 20 seconds to start and windows boot
  (Yes, only 20 seconds)
  When I upgraded my ram to 4 GB it takes too long to start and windows boot
  nearly 160 seconds

  Hello

  1 - is the operating frequency of the matches with the 'old' RAM newly installed?
  2. how many RAM sticks are there?
  
  Let's try the following steps:

  Also launch memory diagnostic tool. How will I know if my computer has a memory problem?

  http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-know-if-my-computer-has-a-memory-problem

  If there are 2 RAM sticks, remove one RAM Strip and check the speed. You can also try to swap the RAM sticks and check.

  For more help, I suggest that you post your question in the HP support forum.

  http://h30434.www3.HP.com/PSG/

• LaserJet pro m401dne: fatal error, takes too long to connect with the printer

  Downloaded the driver of HP software, started installation and got to the point where it says to connect the printer, did, he recognizes it, start the data transfer and just takes forever. After ten minutes, I get fatal error takes too long to communicate with the printer, if aging persists restart the computer and try again.

  I've made this 3 times now and same result.

  Since my laptop doesn't have a cd drive, I copied the cd to a flash drive and installed the software from that. Worked perfectly. Something must be missing or corrupted download. Anyway problem solved

• Windows 7 take too long to the mouse and keyboard anable.

  Hello

  I have replace my SSD HARD drive (2 hard drives 120 GB each RAID 0) w / Windows 7 Pro 64 bit. After the replacement windows take longer time to activate the mouse and the keyboard - 5/10 seconds.
  I've updated the drivers for the two, but still have the same question. The boot is faster, but the mouse and keyboard take longer to wake up.

  Any help?

  Thank you

  M. Vilela

  Hi MVilela,

  Thanks for asking this question to Microsoft Community!

  I understand that after the replacement of the hard disk of the computer takes too long to turn on the mouse and the keyboard.

  Your Windows 7 is better suited in the TechNet forums. I suggest you to send your query there.

  Here is the link: http://social.technet.microsoft.com/Forums/en-us/w7itproperf/threads

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• "Unable to configure windows update, changes the way back" takes too long...

  My PC just newly formatted and now I can see a problem when I turn it off, he just starts to day and after that it fails... I'm worried about what it takes too long... from 10:00 until 16:00? I read an article on them, she'll just take up to 20-30 minutes, but watch?

  Is there something I can do? Can normally on my return from PC? or what I need to reformat?

  Hi Andrei,

  Thanks for posting your query in Microsoft Community.

  I understand your concern, and we as a community will try to help you in the best possible way we can.

  Here are solutions to some common problems with installing updates. You might be able to fix some problems automatically by running the Windows Update Troubleshooter.

  I suggest you check out the link below and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  https://support.Microsoft.com/en-us/KB/949358

  Hope the information helps, if you have any additional questions, feel free to post. We are here to help you.

  Kind regards

  Guru Kiran