Hyperion EPM services take too long to start

Similar Questions

• Hearing of 2015 CC takes too long to start

  Hearing of 2015 CC takes too long to start. As more than a minute.

  Using administrator rights does not make a difference.

  Fresh install... even though I updated from Windows 8.1 to 10 Windows (Windows updater) and I had hearing in Win8.1 so... is there any cleaner Adobe application that I could use to solve this problem?

  I found the solution!

  Simply find the file dynamiclinkmanager.exe on any folder of Adobe products, that is having this same problem, and remove the extension (.exe) format to it.

  Confirm the action and open the hearing as quickly as it should.

• HP ENVY 15-j110, takes too long to start

  Hey guys I have HP ENVY 15-j110 I bought recently, but now, after a month it takes too long to open and sometimes only a black screen.

  He

  Product number is this #ACJ F6C58PA

  answer as soon as possible.

  This could be due to the application running in the back ground and starting applications. Try

  Selective startup:

  http://Windows.Microsoft.com/en-us/Windows/Run-Selective-startup-system-configuration#1TC=Windows-7

• Toshiba WL863 takes too long to start and its Set Top box problem

  Hello

  Aside from no YouTube on the TV - is not a real question

  I have 2 problems with WL863 TV:

  1. the TV takes long time to turn on (between 2.5 and 4 minutes).
  2. the sound of the TV from a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  I use the latest firmware.

  This would have something to do with the settings, or do I have to send the TV for repair under warranty?

  Please give some suggestions.

  Thank you

  > 1. The TV takes time to market (between 2.5 and 4 minutes).
  Have you noticed that in the past, or the first day of purchase?

  If not, I recommend you load the default settings (reset) TVs and check it again.
  In the case where the reset won't help you, it might be that a question and device TV related material must be verified by the service agent.

  > 2. The sound of the television to a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  This problem could be linked to the connected Set Top Box and not the TV device.

  TV receives the audio signal from the external, connected HDMI (in your Set Top Box case) device. Check if the same audio issues would be noticeable by using another external device like a DVD or BD player. In case the sound issue would be noticeable only with decoder, the question isn't related to the TV, but to the external device.

• OfficeJet 7500 a take too long to start to print.

  Hello

  I recently purchased the Officejet 7500 has, for its ability to large format. Very often, after clicking 'Print' in my app Apple Pages, a very long time (several minutes) will pass like the computer "looks" for the printer. Also, as often, once she found the printer it will take a lot of time to 'connect' to the printer. Last night at 23:00, I clicked on print. This morning at 07:00 it was always "sends data to the printer." The document is a simple pagle.

  When I try to use the HP utility he also takes a lot of time to 'communicate' with the printer and just hanging there.

  This problem is not always the case. Sometimes I can print several pages without interruption, but all too often, there is a long long long time. This NEVER occurred with my previous Epson printer.

  The printer is directly connected to my Mac via the USB cable.

  Someone has an idea what could be the problem and how can I fix?

  Thank you

  Brian

  Thanks, I found this article, and it seemed to do the trick.

• Satellite M30x-129 takes too long to start

  After pressing power botton (blue), that it takes up to 15-30 min before the computer laptop start start, something crashes @ select the boot device...
  I changed the RAM, I'm on my way to the processor,

  Please I need help with this...
  Thank you

  Hello Suji

  What happen exactly when you press the power button / stop?
  Toshiba welcome screen appear immediately?
  You can enter BIOS settings immediately after your Satellite market?

• Computer laptop dv7 takes too long to start

  About two weeks ago, I buy a laptop pavilion dv7-4165dx because I really like the features of the laptop. When I turn on the computer, it took about 10 minutes to start after the initial installation. I got at best buy because I thought it was a faulty hard drive, because any given work very well, at best buy told me that the laptop was fine and had no problems. But I still have the same problem because take laptop about 3 to 4 minutes at the start he crashes in the welcome message, after I typed my password. I have already updated all drivers and BIOS, can someone help me.

  Hello

  I would get Best Buy to replace the notebook that you really shouldn't have these kinds of issues with a whole new machine.  It could be that the Windows image is bad, or some other hardware related issue.  I would definetely get that he replaced however.

  All the best,

  DP - K

• After changing the MagSafe adapter, macbook pro takes too long to start the video

  After changing the map of 85 W MagSafe, time to start the computer has become excessive (2 minutes). The screen lights up immediately, but the video appears after 2 Min.

  Once started, the performance of the computer are OK.

  This anomaly occurs after the change of the adapter, it's never happened before.

  Try a SMC reset:

  https://support.Apple.com/en-us/HT201295

  Ciao.

• Toshiba satellite with Windows8 takes too long to start (5 min)

  I have a

  Toshiba satellite i7 L845; 6 GB; 64 bit

  I turn off a lot of start up programs with MSCONFIG.exe (except Windows); When I reinicieted it works correctly (restart in seconds), but if you turn off and on again, the slow restart reappear.

  Your advice, I will apreciate.

  Hello

  Check with Toshiba Support, their drivers and documentation online and ask for their
  Forums about known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  You must also use a process of elimination methods to determine what startup programs
  affect your boot. And it could be more than one and even a combination. Remove items
  you need not start.

  ========================================

  These should help:

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  How to speed up your PC
  http://support.Microsoft.com/kb/2746761/en-us

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  How to create a recovery USB in Windows 8
  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After the upgrade of RAM it take too long to begin and start windows.

  Original title: laptop

  Hello

  I have (HP compaq presario V6615EN)
  Core 2 duo 1.83 GHz
  2 GB OF RAM
  Windows vista Home premium 32-bit
  It took 20 seconds to start and windows boot
  (Yes, only 20 seconds)
  When I upgraded my ram to 4 GB it takes too long to start and windows boot
  nearly 160 seconds

  Hello

  1 - is the operating frequency of the matches with the 'old' RAM newly installed?
  2. how many RAM sticks are there?
  
  Let's try the following steps:

  Also launch memory diagnostic tool. How will I know if my computer has a memory problem?

  http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-know-if-my-computer-has-a-memory-problem

  If there are 2 RAM sticks, remove one RAM Strip and check the speed. You can also try to swap the RAM sticks and check.

  For more help, I suggest that you post your question in the HP support forum.

  http://h30434.www3.HP.com/PSG/

• LaserJetPro HP 1102w impression takes too long

  Hello

  I installed HP 1102w on my laptop using the driver from the CD. Printing is configured using USB and ePrint is disabled.

  Printing takes very long (18 s). When I send a print job (even test page), I don't see that it appears in the printer job window liquid. However until I see that some data has been sent to the printer (for example 4 KB / 146kb) time is about 9 seconds. To start sending data up to what the page is printed is another second 8-9 so time total is Reiver 18 seconds in the best of cases.

  My laptop is:

  Windows Visa Business, 3 GB of RAM, Dual-Core clocked at 1.6 GHZ, SSD drive 120 GB.

  I tried to install the XPS (planned it will be faster) driver for this printer however failed to install with the 0x070c error code.

  Please have a tip how to print faster (reduce the time of 8 seconds until that data is sent to the printer)

  Thank you

  Miro.

  Hi @MKLI ,

  I see by your post that the printer takes too long to print in a USB connection. I would like to help you today.

  What kind of documents you print? (PDF, Txt)

  Have what applications you tried?

  Try a different file or application to see if you have the same results.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Printing a Configuration Page. Select the method two.

  Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable should not be more then 6 feet. Try a different USB port on the laptop. Some ports are higher power then others. You may need to try another USB cable to see if that causes this problem.

  Check the power on the computer to see if that is causing the problem.

  How to make in the Windows Device Manager?

  Go to Device Manager, under Bus for each made USB root hub controllers right click and left click on properties, for the management of the power supply remove the check box for "allow the computer to turn off this device to save energy. It allows the computer to restrict or cut off the power for this unit.

  Restart the spooler to print on the laptop.

  Click Start (), type services.msc in the Search box and press ENTER.

  Find the service named print spooler, right click and select Properties. Click on stop and then click Start.

• Windows update takes too long to find the updates

  I had just installed a new hard drive on my laptop Dell inspiron N5050. I did a reinstall of system clean of my operating system to windows 7. After that, I started to run windows update to get all the necessary updates that I need to update completely from the computer. He has worked for a very long time with no result. In addition, at least 2 hours. all the settings for windows update is set to the settings recommended. but for some reason, in my view, takes too long to get updates. can someone help me please this possible issue

  Hello Darrin,

  Thanks for posting your query on the Microsoft Community.

  According to the description, the Windows updates take a long time to find the updates.

  I suggest to follow the methods below and check if that helps.

  Method 1: If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooter.to of update of Windows the problem fix. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Reference:

  Open the Windows Update troubleshooting tool

  If the problem persists, try Method 2,

  Method 2: run the clean boot: Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  See also:

  Problems with installing updates

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• My daughter Air2 IPad takes too long to save. It is connected to wifi, connected and the screen is locked.mAny advice?

  My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?

  How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.

• Take too long time to come for Windows

  Hello

  I have Pavilion g6-2031se and of the last two days it takes too long to come to Windows. I faced this problem for the first time and I do not use my notebook for Skype, Facebook and only very light work. Can someone help me with this?

  Thank you

  Ganga

  @Ganga,

  No worries, I would like you to try a clean boot. This allows the computer to boot without unnecessary programs or offers to start with it.  When you open this document of croll to the section "How to perform a clean boot" once listed there to expand the section for your operating system to get the appropriate instructions.

  Once you have made the appropriate changes, restart the computer at least 3 times and see if you notice a difference not how long it takes to start.

  Please answer as soon as possible.

  Thank you

• LaserJet pro m401dne: fatal error, takes too long to connect with the printer

  Downloaded the driver of HP software, started installation and got to the point where it says to connect the printer, did, he recognizes it, start the data transfer and just takes forever. After ten minutes, I get fatal error takes too long to communicate with the printer, if aging persists restart the computer and try again.

  I've made this 3 times now and same result.

  Since my laptop doesn't have a cd drive, I copied the cd to a flash drive and installed the software from that. Worked perfectly. Something must be missing or corrupted download. Anyway problem solved