LaserJet pro m401dne: fatal error, takes too long to connect with the printer

Similar Questions

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• Why do I get access denied error when I try to connect to the printer?

  * Original title: Please help me

  Why do I get access denied error when I try to connect to the printer?

  Hello

  Try right-clicking on the printer software when installing it and select run as administrator.

  See you soon.

• error message 'there is a problem with the printer turn the printer off even more'

  I have a new 7525 HP photosmart HP printer, if it can find all the flashing lights with an error message on the screen "is there a problem with the printer. Turn the printer off on new"this does not solve the problem... Can't clear this error message!  Cannot use this printer!

  Hi sandrafranks,

  Thank you for your answer!

  In my view, it is unwanted material. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this helps and have a great day!

• HP LaserJet Pro P1606dn: Fatal error Laserjet p1606dn - hard reset does not help

  I powered on my printer this morning and having to "calibrate" - type sounds for about two minutes, the Attention, ready, and go lights on (solid, no blinking). The printer prints everything I have send to it, even test pages. By following the instructions on this page, I did a hard reset by putting off the printer, unplug the power cable, leaving unplugged for about 60 seconds, then in him plugging back in and turning it back on. Same thing: makes noise for a minute or two, then three strong lights.

  The printer is on a wired LAN, and I tried printing from two different computers on the network. I tried not to do a direct USB connection yet because this seems irrelevant to the question. The network (10.10.10.x) page shows the status of the printer such as "Printer Error".

  FWIW, he showed the same error last week, but a hard reset fixed it on the first try. This time, it does not.

  EDIT: If it helps, the date of the firmware is 20120814. I tried to update to 20150114 via the update utility, but he says that he can not find a serial p1600 printer is installed.

  EDIT 2: the printer will not even turn on. Tried a few different outlets, power strip directly into the wall vs - nothing. I think he's dead. Based on my experience with HP printers, I'm not surprised.

  Hey @dselzle,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are having problems with turn your Laserjet P1606dn. I can help you with that.

  To start, you will want to make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once's done it, this document will help you with your power problems.

  If you are able to turn on the printer, then that's fine. If it doesn't always turn the printer will need to be repaired. You can contact HP by clicking on this link by clicking on the form below.

  If this resolves your problems so please let other users know by clicking on accept as Solution next to this post.

  I hope this helps and I hope you have a nice day!

• takes too long to execute after the join

  I found that only this little code of actual code is very heavy running and it has 81000 hr_employeeattendance table and increase day & c_bpartner table has 7000 records
  
  If this query is executed without enroll_id & timeofattendance then it takes too much time (20 minutes). Is it possible to run faster
  
  DB version is 10.2.0.1
  
  CREATE TABLE HR_EMPLOYEEATTENDANCELOG
  ('AD_CLIENT_ID'-> NUMBER (10,0) NOT NULL,)
  "AD_ORG_ID"-> NUMBER (10,0) NOT NULL,
  "CREATED"-> default SYSDATE DATE NOT NULL,
  "CREATEDBY"-> NUMBER (10,0) default 0 NOT NULL,.
  "ENROLL_ID"-> NUMBER (10.0).
  "FIRSTATTENDANCE"-> CHAR (1 BYTE) by DEFAULT 'n',
  "HR_EMPLOYEEATTENDANCELOG_ID"-> NUMBER (10,0) NOT NULL,
  "IP address"-> NVARCHAR2 (30),
  "INOUTMODE"-> NUMBER (10.0).
  "ISACTIVE"-> CHAR (1 BYTE) by DEFAULT NOT NULL, 'Y '.
  "LASTATTENDANCE"-> CHAR (1 BYTE) by DEFAULT 'n',
  "MACHINENUMBER"-> NUMBER (10.0).
  "TIMEOFATTENDANCE"-> DATE.
  "UPDATED"-> DATE default SYSDATE NOT NULL,.
  "UPDATEDBY'-> NUMBER (10,0) default 0 NOT NULL,.
  "VERIFYMODE"-> NUMBER (10.0)
  )

  insert into  hr_employeeattendance values(1000000, 1000002, 07-OCT-2011, 0, 127, Y, 1276566, 192.168.20.185, 0, Y,     N, 8, 03-OCT-2011 08:32:11, 07-OCT-2011, 0,     1)
   
  insert into  hr_employeeattendance values(1000000,     1000002,     07-OCT-2011,     0,     127,     N,     1276640,     192.168.20.185,     0,     Y,     N,     8,     03-OCT-2011 11:52:11,     07-OCT-2011,     0,     1)
   
   
  insert into  hr_employeeattendance values(1000000,     1000002,     07-OCT-2011,     0,     127,     N,     1276640,     192.168.20.185,     0,     Y,     Y,     8,     03-OCT-2011 16:04:11,     07-OCT-2011,     0,     1)

  CREATE TABLE C_BPARTNER
  ('AD_CLIENT_ID'-> NUMBER (10,0) NOT NULL,)
  "AD_ORG_ID"-> NUMBER (10,0) NOT NULL,
  "C_BPARTNER_ID"-> NUMBER (10,0) NOT NULL,
  "ISEMPLOYEE"-> CHAR (1 BYTE) DEFAULT ' is NOT NULL,.
  'NAME'-> NVARCHAR2 (60) NOT NULL,
  "ENROLL_ID"-> NUMBER
  )
  

  insert into  hr_employeeattendance values (100004,1000001,1000045,Y, TIM,127)
   
  insert into  hr_employeeattendance values (100004,1000001,1000045,Y, TIM,128)

  Some code is here which is a problem then as full downstairs

  SELECT   DISTINCT
             alii.ad_org_id,
             alii.ad_client_id,
             bpii.c_bpartner_id,
             NVL (
                (SELECT   (MIN(TO_CHAR (ali.timeofattendance, 'HH24:MI:SS')))
                   FROM   hr_employeeattendancelog ali
                  WHERE   bpii.enroll_id = ali.enroll_id
                          AND TO_DATE (TO_CHAR (ali.timeofattendance),
                                       'dd/mm/yyyy') =
                                TO_DATE (TO_CHAR (alii.timeofattendance),
                                         'dd/mm/yyyy')),
                0
             )
                AS first,
         TO_DATE (alii.timeofattendance, 'DD-Mon-YYYY') AS timeofattendance
      FROM      c_bpartner bpii
             JOIN
                hr_employeeattendancelog alii
             ON alii.enroll_id = bpii.enroll_id
     WHERE       bpii.isemployee = 'Y'
             AND bpii.isactive = 'Y'             
  --           AND bpii.enroll_id = '127'  --this not to give in this
  --           AND alii.timeofattendance BETWEEN '01-oct-2011' AND '02-nov-2011'  ----this not to give in this
  GROUP BY   bpii.c_bpartner_id,
             bpii.enroll_id,
             alii.timeofattendance,
             alii.ad_org_id,
             alii.ad_client_id;

  Output is the place where enroll_id = 127.

  ad_org_id- ad_client_id- c_bpartner_id-  first-   timeofattendance - 
  -----------------------------------------------------------------------------------------------
  1000002     1000000     1005766     08:41:22     10/1/0011              
  1000002     1000000     1005766     08:44:16     10/3/0011             
  1000002     1000000     1005766     08:42:38     10/4/0011                
  1000002     1000000     1005766     08:45:12     10/5/0011                
  1000002     1000000     1005766     08:42:44     10/7/0011

  If this query is executed without enroll_id & timeofattendance then it takes too much time (20 minutes). Is it possible to run faster
  
  the actual query that I have to run it is where that bit of code that is written above

  SELECT   DISTINCT
             alii.ad_org_id,
   
             alii.ad_client_id,
   
             bpii.c_bpartner_id,
   
             NVL (
                (SELECT   (MIN (TO_CHAR (ali.timeofattendance, 'HH24:MI:SS')))
                   FROM   hr_employeeattendancelog ali
                  WHERE   bpii.enroll_id = ali.enroll_id
                          AND TO_DATE (TO_CHAR (ali.timeofattendance),
                                       'dd/mm/yyyy') =
                                TO_DATE (TO_CHAR (alii.timeofattendance),
                                         'dd/mm/yyyy')),
                0
             )
                AS first,
   
             NVL (
                (SELECT   (MAX (TO_CHAR (ali.timeofattendance, 'HH24:MI:SS')))
                   FROM   hr_employeeattendancelog ali
                  WHERE   bpii.enroll_id = ali.enroll_id
                          AND TO_DATE (TO_CHAR (ali.timeofattendance),
                                       'dd/mm/yyyy') =
                                TO_DATE (TO_CHAR (alii.timeofattendance),
                                         'dd/mm/yyyy')),
                0
             )
                AS last,
   
             TO_CHAR (alii.timeofattendance, 'DD-Mon-YYYY') AS dated,
            
          NVL (
                (SELECT   TO_CHAR (hr.intime, 'HH24:MI:SS')
                   FROM   hr_markattendance hr
                  WHERE   hr.enroll_id = bpii.enroll_id
                          AND TO_DATE (hr.date1, 'dd/mm/yyyy') =
                                TO_DATE (alii.timeofattendance, 'dd/mm/yyyy')),
                0
             )
                AS intime,
   
             NVL (
                (SELECT   TO_CHAR (hr.outtime, 'HH24:MI:SS')
                   FROM   hr_markattendance hr
                  WHERE   hr.enroll_id = bpii.enroll_id
                          AND TO_DATE (hr.date1, 'dd/mm/yyyy') =
                                TO_DATE (alii.timeofattendance, 'dd/mm/yyyy')),
                0
             )
                AS outtime,
   
             TO_DATE (alii.timeofattendance, 'DD-Mon-YYYY') AS timeofattendance
   
      FROM      c_bpartner bpii
             JOIN
                hr_employeeattendancelog alii
             ON alii.enroll_id = bpii.enroll_id
     WHERE       bpii.isemployee = 'Y'
             AND bpii.isactive = 'Y'
             AND bpii.enroll_id = '100'                                              --- This is dynamic value selected at front end-----
  --           AND alii.timeofattendance BETWEEN '01-oct-2011' AND '02-nov-2011'
  GROUP BY   bpii.c_bpartner_id,
             bpii.enroll_id,
             alii.timeofattendance,
             alii.ad_org_id,
             alii.ad_client_id;

  Navneet Singh says:

  Has no result, one is still unanswered

  Because it is not possible to answer when you refuse to provide the information requested in this thread and and now in this

  DOM Brooks wrote:
  See [url https://forums.oracle.com/forums/thread.jspa?threadID=863295] how to post a sql tuning request

  If you are prompted to provide information needed by people to help you, you need it, do not ignore queries and start a new thread for the same subject where you again once do not provide the necessary information.

  It's wasting the other forum members time and abuse of this community.

• HP DV7-1020EA takes too long to load, when the Bureau before being able to use windows Vista 64 bit

  HP Pavilion DV7-1020EA

  Last update of BIOS/CMOS

  Vista Home Premium 64-bit

  Watermark factory recovery

  All the appropriate HP update & Windows Update installed

  Adobe Flash & Sun Java installed

  Removed bloatware

  Tried Msconfig and disable all startup with no improvement items

  Intel Centrino 2

  NVIDIA PureVideo HD graphics card

  HDMI & eSATA

  Problem: Booting into windows is OK a tad slow ish but it load the Office once it takes forever to load before you can get along with just about anything.  As you can not connect to the Internet until the Office has charged.  I don't think its something in the system tray causing lazy loading.

  Any suggestions what to try please.

  See you soon

  Steven.

  Hi Steven,

  It should not perform the function of the buttons on the capacitive Strip if you disable Task Scheduler fast player - however another option would be to put the service to start manually instead of automatically when Windows starts.  To do this, first enable the service from the msconfig services tab, apply the change and then reboot the laptop.

  When windows has completely recharged (it will probably slow again), open windows control panel, open administrative tools, and open Services.  Find the Task Scheduler player quick entry, right click and select Properties.  In the drop-down list next to Start up type, select manual, then click on apply then Ok to save the change.  Restart the computer for the change to apply and see if the time it takes to get a usable desktop is always good - if this is the case, then I'd leave the QPTS function defined in the manual.

  Kind regards

  DP - K

• Why does take so long to connect to the new update?

  I tried to fix this overnight, it takes so long to log, and this was not the case before I updated my Mac Book Air. I tried to reinstall but it doesn't work and I've had this problem since the upgrade.

  It is a space to discuss the Windows version of Apple software update. I asked your thread to be moved.

  TT2

• Fatal error message, system process ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)

  Windows does not start, press the system restore, but it happens with stop: c000021a {fatal system error} the session manager failed to create protected prefixes of the completed system unexpectedly with the status of 0xc000003a (0x00000000 0x00000000) the system stopped

  Hello

  ·        Are you able to boot into office?

  ·        Remember to make changes to the system?

  I suggest you to remove the external devices (such as a printer, scanner, etc.) on the system and check

  Method 1:

  I suggest to start in safe mode and check.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Method 2:

  I suggest you begin the last known good configuration and check.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select last good known in the list and press ENTER.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the word "error" to "ready" on my connection with my printer so that I can print?

  Printer is HP Photosmart C5100 series, I had only 1 printer who kept showing the error instead of loan so I added 2 additional printers and I have the same problem with all of them.

  Ink is correct and the 3 are to be online.  It was printing fine about 2 weeks ago.

  It has happened, then began to work properly - I don't know why it started working right but I can't print.  It will display 'ready' if I send it to a single Note, but I need to print immediately.

  The printer prints a copy of something if you ask on the menu screen and use which is on the printer itself.

  Have you given it a shot?
  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• Skype takes too long to connect

  I open Skype and type my username and password, but it takes more time than he should never to sign

  I have windows 8.1

  Hello m8, could you please try the following and tell me if improvements have been made? Press ctrl-alt-del made Skype.exe right-click and change the priority to high

• How can I fix Firefox 18 and 19 to take too long to close when the custom settings for history is used?

  Hello, please read entire post before responding, thanks!

  I had 12. Firefox (FF) something and he used with happiness when I was getting a new hard drive and start over, I decided to upgrade to the latest FF of the moment, 18.something...

  After going through the implementation of all the different Add - ons etc... and reset the options/preferences (not cool how you reset all those whenever it updates!) The opening time and closing went from 2 to 4 seconds each to 78 seconds to open and 48 seconds to close. In the last two days, I tried (except reset) and read all the suggestions on here does not.

  So I read up on how to uninstall completely any trace of Firefox so I could do a clean install, which did not work, either: the freshly reinstalled 18 FF. ? program still opened and closed at the same time, and had all my info despite my deleting files/sub-sub-sub-records said to hold this info. I disabled everything in FF, still no improvement, so still once I tried to find info on how to completely remove the FF and still nothing it is right for current programs.

  Today I looked again for the info on how to remove completely the FF, found something new to me and tried this, including the complete registry search and remove anything with the name of firefox, then reinstalled FF 18. ?
  Yet all my favorites and info was there, and when I raised my help he auto-mis updated to 19.0 without my permission, even when I don't like other decisions for me for "my good"(d'où le nom d'écran) not OK! ".

  So I tried the reset function to 19.0 FF and it's just that and the opening and closing time lag had gone, back to 2-4 seconds each, which seemed great!, but no.

  When I went back to set up my options and restarted, FF went back to the lag, so I eventually removed/reset everything and all was well again, so I started putting/setting things back one at a time, that's when I found and verified the problem, the history settings!!!
  

  I repeated this 6 times with the same results:
  The value of history to remember, and everything works well, story custom game lag returns without fail.

  My settings in Custom were:

  Accept and remember everything until I close FF
  Clear history the closure of FF.

  In the "Settings" submenu under the closure of FF clear history:
  All 6 boxes are checked for history and no boxes have been checked for data (all default values)

  I watched the process running in the task manager during startup and shutdown FF with these settings, I found that it was not only FF.exe works but also a plugin - container.exe, both eventually stop after about 48 seconds, the plugin container does not appear to run when the story is set on do not forget all the... (I have an incomplete memory on the container of plugin causing problems of this kind in the past, but I can't remember what or exactly when so much...)

  I also tried to leave the setting of history to remember them all and him restarted and tried to erase everything in the menu Tools and FF unresponsive for about 60 seconds and then seemed fine afterwards.

  So, I conclude that there is a problem in the newer versions with the history of compensation in the background while the browser continues to operate, and the likely culprit is the plugin container(again?)...

  So now to the questions...

  Is it possible to set to Custom history and 19.0 FF remain operational during this process and for FF close in a few seconds, as in FF 12. something with the same parameters of the story?
  If yes how can I configure that?

  If no, what is the last version that will work properly with history to remember until FF is closed and then wipe front of re-opening, without waiting for more than a few seconds for everything to happen as it was in my FF12. ? Version?

  Also, How do I remove ALL TRACES of Firefox 18.? and up so that I can do a clean install if I need to, as I said everything that is here or linked to from here up to today, 2/21/2013, was not sufficient.
  

  Thanks for your time...

  (See attached image) That's what worked for me to 19.0 Firefox, and I was able to verify that cookies have been deleted before restart, thanks again for your timely assistance.

• HP LaserJet Pro 200 color M251: envelopes are wrinkled, how to adjust the printer?

  The printer tends to 'rolling' envelopes when printing and put a fold in some ways. Is it possible to adjust the flow to the printer so that it is not offending the envelopes? With self-adhesive envelopes, it works better, but it still changes the fold in the flap.

  I want to know if this can be adjusted. Please do not just stick in the boilerplate response.

  Hi @JayEll ,

  I see you found folds when printing on envelopes. I want to help you solve this problem.

  Adjust the print driver for the type of paper for envelope, this should solve this problem.

  If the paper is not set correctly, it can cause creases or types of paper not supported also.

  You may just be able to set a default to plain paper. If you print from Word, you need to set the default settings through devices and printers in the printer properties.

  What type and size and the weight of the envelope are you using?

  Try another type of envelope to see if you have the same results.

  The printer supports up to 24 lb envelope.

  COM 10
  Monarch
  DL
  C5
  B5

  You have this problem with other types of paper?

  Have a great day!
  Thank you.

• Error in creating a Net connection with the user "sys" DBA

  I can log in as user "sys" on site, but can not
  connect as user sys as a network connection.
  
  situation #1: connect locally... no problem...
  
  [oracle@localhost ~] $ sqlplus
  
  SQL * more: Production of release 11.2.0.1.0 sam may 12 23:31:39 2012
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  Enter the user name: sys as sysdba
  Enter the password:
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  
  situation #2: network connection... "sys" error message - no sufficient privileges...
  
  SQL > connect sys@orcl as sysdba
  Enter the password:
  ERROR:
  ORA-01031: insufficient privileges
  
  situation #3: connect network as user 'system'... no problem...
  
  SQL > connect system@orcl
  Enter the password:
  Connected.

  GabyPR wrote:
  I can log in as user "sys" on site, but can not
  connect as user sys as a network connection.

  situation #1: connect locally... no problem...

  [oracle@localhost ~] $ sqlplus

  SQL * more: Production of release 11.2.0.1.0 sam may 12 23:31:39 2012

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Enter the user name: sys as sysdba
  Enter the password:

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  situation #2: network connection... "sys" error message - no sufficient privileges...

  SQL > connect sys@orcl as sysdba
  Enter the password:
  ERROR:
  ORA-01031: insufficient privileges

  be GRATEFUL in this case; otherwise anyone can connect to DB from anywhere 'as sysdba'

• printer driver error message: unable to print. previous document is printing in the background. Printer is a network printer, no one else on the network error. I removed and connected to the printer without success. Any suggestions?

  previous document is printing in the background

  Sounds like you, or someone who uses your computer has print something and locked up. what I would do, is try to reinstall the printer drivers. Please rate me upward if you find my post helpful. Thank you!