Jet lag
Hi guys I have post the same question in the forum of forms but did not get the answer, maybe I post in the wrong forum can someone help me sort the question below? I tried a lot of requests but fail to achieve the hope of result GET expert response form
I have a stored time in varchar2 column 175820 which I imported from access database.
SQL > SELECT TO_CHAR (TO_DATE ('175800', 'HH24:MI:SS'), 'HH24:MI:SS') FROM DUAL;
TO_CHAR)
--------
17:58
SQL > SELECT TO_CHAR (TO_DATE ('05: 58:00 ',' hh), 'HH') FROM DUAL;
TO_CHAR)
--------
05:58
the conversion is ok, but how can I less some time with specific time
How can I at least have the time with 180000 col1, which is (06:00:00)
I want less time which is more less 180000 (06:00:00)
175800-180000 its should give the difference 00:02:00 000200 or 0 hours, 2 minutes, 0 seconds. a syntax or a query?
I am using 10 g and 10 g database forms.
Concerning
You can use EXTRACT. Like this.
SELECT EXTRACT (HOUR OF TO_TIMESTAMP('180000', 'HH24:MI:SS')-TO_TIMESTAMP('175800', 'HH24:MI:SS')) ||) ' HOURS '.
EXTRACT (MINUTE OF TO_TIMESTAMP('180000', 'HH24:MI:SS')-TO_TIMESTAMP('175800', 'HH24:MI:SS')) ||) ' MINUTES '.
EXCERPT ((SECOND FROM TO_TIMESTAMP('180000', 'HH24:MI:SS')-TO_TIMESTAMP('175800', 'HH24:MI:SS')) ||) ' SECONDS
FROM DUAL;
OUTPUT:
0 HOURS 2 MINUTES 0 SECONDS
Post edited by: Partha Sarathy S
Tags: Database
Similar Questions
-
Need help w / Script Groovy (Jet lag)
I'm writing a script groovy/function which displays the difference (DD:HH:MM:SS) between two dates (now rather than a time of inputt'ed).
I run the following script, which seems like it should work, but I get the error referenced below: DATEVAL is an input value. Any idea?
import groovy.time. *.
def now = new Date()
TimeDuration duration = TimeCategory.minus (now, dateValue)
length of back
Error:
the value returned by the Script: "the static value of the type: 'groovy.time.TimeDuration' ' is not assignable to the type of the Script output:" foglight-5 - admin:TimeDuration.
Screenshot:
change your output type of the object, see what it says to type when you test again.
-
I try to use this function to set the time on about 1,000 that I took to Hawaii because I forgot to set my camera.
However, the option is grayed out in the pop up menu in the module cards. Even if I just select a photo, it is always grey.
How to use this feature? Use Lightroom CC on Yosemite. Thank you
Don't know how or if you can do it in the card module, but you can adjust the Capture time in the module library using metadata/Edit capture Time.
-
Quary for Jet lag Date...
Hi guys,.
I want to get the time difference between two dates... Something like below...
e.x.1:-
For example, 2 that it returns only 0 days and 15 hours...
Date1 - 2009-09-04 10:00:00
Date2 - 2009-09-04 12:00:00
Should return
in_days in_hours
1 2
e.x.2:-
Date1 - 2009-09-03 17:00:00
Date2 - 2009-09-04 08:15:00
Should return
in_days in_hours
2 15.25
e.x.3:-
Date1 - 2009-09-03 23:55:00
Date2 - 2009-09-04 00:05:00
Should return
in_days in_hours
2 0.17
Days should be number of oracle calendar days and hours should be rounded to 2 decimals...
I tried using the following formula... but it doesn’t really work...
SELECT
extract(day from numtodsinterval((date1-date2),'day')) in_days,
extract(day from numtodsinterval((date1-date2),'day')) in_hours
FROM MYTABLE;
Can anyone help?
Thank you...
Published by: Napster on September 21, 2009 01:33Napster says:
HI Alex,Thanks for your interest... but I like to count the days that way... so for the days column, you should always get a value > = 1...
So maybe a little more like this...
SQL> ed Wrote file afiedt.buf 1 with t as (select to_date('2009/09/03 23:55:00','YYYY/MM/DD HH24:MI:SS') as date1 2 ,to_date('2009/09/04 00:05:00', 'YYYY/MM/DD HH24:MI:ss') as date2 from dual) 3 -- 4 select round(trunc(date2)-trunc(date1))+1 as days 5 ,to_char(((date2-date1)-(trunc(date2-date1)))*24,'fm90.00') as hours 6* from t SQL> / DAYS HOURS ---------- ------ 2 0.17 SQL>
-
Conversion of jet lag to readable time
Hi all
I just posted a thread about an hour on how to get the difference between the current time and the two tables ago. My results are as follows:
Call ModDate $modtime age
Open 2009-04-09 13:47:08 2.57
The age is this command:
round ((sysdate-to_date (DateMod || modtime, ' YYYY-MM-DDHH24:MI:SS')) * 1440, 2)))
Is it possible to convert the result (2.57) HH24:MI:SS format?I thought that I showed in your original post:
with t as ( select '2009-04-09' ModDate,'13:48:30' ModTime from dual ) select numtodsinterval(sysdate - to_date(ModDate || ' ' || ModTime,'yyyy-mm-dd hh24:mi:ss'),'day') duration from t / DURATION --------------------------------------------------------------------------- +000000000 00:04:34.000000000 SQL>
SY.
-
Cannot automatically receive files
I use Skype 7.0.0.102, IE 11 win7 desktop. The option "automatically accept the received files" is checked. However, I can't receive files automatically from any contact. I work with the Jet lag, and it would be vital for me. Same problem on my laptop win 8.1. Tried to reset the settings in IE, delete the temporary files... etc... What Miss me?
What type of files are you talking about? There are only a few types of files that can be automatically transferred. It's Office files (.doc, .xls, etc.) and image (.jpg, .png) files.
-
a stop time loop by using the time difference of two counts of ticks
Hi guys,.
I'm writing currently a code test how much time does it take for a formula node perform its operation. The program uses some time to perform the calculation in a loop, and the program stops after having calculated when the number of cycles reached 10 seconds. The program then displays the number of iterations, he does it in 10 seconds.
If at the beginning, I created 2 images of the structure of the sequence. In my first image, I have my original number, and as part of my second, I have my final number of cycles and the while loop. I used the subtraction function and divide the result by 1000 to get jet lag. Then using the comparison function, I put if output > 10 then the program must stop, to do this, I've linked out of the comparison function to the button stop inside the while loop.
However, when I tried to run the code, the program just didn't run. That's why I created a similar program that puts the final number of cycles in the new image sequence. When I ran this code, the program never stopped.
Guys do you have any idea what was wrong with my codes.
Thank you!
Erry
Stream!
In the two VI the Terminal stop of the while loop is controlled by a Boolean value whose source is outside of the while loop. If this loop will be executed once, or forever, depending on the value of the Boolean value which is calculated before the loop starts and comes to the tunnel through the loop.
I recommend you watch the LabVIEW tutorials online
LabVIEW Introduction course - 3 hours
LabVIEW Introduction course - 6 hours -
Windows 7 this copy of windows is not genuine. fake
It is a real fine reinstalled oem license now this.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0x0
Windows product key: *-* - M3DJT - 4J3WC-733WD
The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
Windows product ID: 00371-OEM-8992671-00524
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {F22BB052-FBB3-4128-A708-90948BE72D3D} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.151230 - 0600
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F22BB052-FBB3-4128-A708-90948BE72D3D} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-733WD 00371-OEM-8992671-00524 2 S-1-5-21-1748919539-2749363488-436584192 Dell Inc.. Latitude E6420 Dell Inc.. A06 20110711000000.000000 + 000C0083907018400FE 1409 0409 New Zealand Standard Time(GMT+12:00) 0 3 DELL CBX3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00178-926-700524-02-1033-7601.0000-0092016
Installation ID: 018576960081043420610184393025350882616274943604162264
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 733WD
License status: Notification
Notification reason: 0xC004F063.
Remaining Windows rearm count: 3
Trust time: 10/02/2016 08:47:29Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 1:11:2016 07:05
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: OAAAAAIAAgABAAEAAgADAAAAAgABAAEAln3wG2MTwxUorXybaNEc2nR4XhzwgFzDcQayAK5bLnM =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC DELL CBX3
FACP DELL CBX3
HPET A M I PCHHPET
STARTING DELL CBX3
MCFG DELL SNDYBRDG
TCPA
SSDT DELLTP TPM
SSDT DELLTP TPM
SSDT DELLTP TPM
LAURENCE INTEL SNB
CBX3 DELL SLICSteve,
No answer to my question on the installation disc that you used, I can't offer any reasonable interpretation of the facts. It was a Dell reinstall drive or was it an installation disc of [unbranded] generic?
I know that you are in New Zealand. If I assume that you posted results MGA here as soon as you ran the utility MGA, your system clock is fast half-day. If there is any difference between the MGA running and then display the results the system clock is even faster. No calculations of jet lag can explain how the utility MGA reported Trusted time at 08:47:29 10/02/2016 because even now it is, in my view, 09/02/2016 19:24 for you.
'only' means only.
Dell started putting CoA labels in the compartment to batteries from their notebooks several years ago. The only labels that they leave on the bottom are black sheet [model number, voltage, the markings of conformity] and their own white label showing the serial number. I'm surprised that they do not for your. Just on the off-chance that this part of the thread was a misunderstanding, it's what looks like a typical Dell CoA label [yours should say Pro instead of Home prem]
If your unreadable label does not resemble, look in the battery compartment.
-
Hello
I m facing problems with the license as directed by my previous post, I want to regenerate of the SSL certificates. I installed a fresh installtion time I want to regenerate once more how I can do? I have to run again perfigo config service on the Manager and the server?
Key issues when the CASE is not added to the NAM according to CISCO
Jet lag
Answer: (time between the Manager and the server is only difference 2 sec)
Issuance of SSL certificates
(I want to regenerate once more it is the only option for me)
setting up connectivity
(NAM and NAS are pinging between them and they are accessible from the network)
Thank you
Estela Hi,
To regenerate the certificates you can do from the graphical interface of the cam to CAM cert:
And since the GUI of the heap for the cert of CASES:
However, please keep in mind that to be able to add the CASE to the CAM, you need valid license installed on the CAM CASE, time sync, and depending on the version, you must also make the CASE for trust in the cert CAM and vice versa.
All of this is documented on the documents I have inspectors out.
HTH,
Tiago--
If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
-
VSpher client connection?
Hello
To make clear that I am a novice.
I installed, ESX5.1 (bare metal), [VCenter Server, VSphere Client and client VSphere Web]-> Windows 2008R2.
It is the second facility from scratch.
In my first attempt, when all them above were installed, when I tried to log in using VSphere client, I could use the AD ID and I think what he connecterd me to ESXi through VCenter.
In my second installation, I can connect via Vcenter using the Web client, using my username AD (ID of the administrator group). Everything works fine, I created data center and added ESXi.
However when I click on VSphere Client, it does not accept my AD account and it only accepts the ID of the root for ESXi
I don't know if this is what is supposed to happen?
So the questions:
1. in order to access ESXis using VSphere Client through VCentre, what should I do? I mentioned, that if I try to open a session using the client it does not accept AD ID
2. How can I use webclient and no client (via VCenter)
< added some information: I renamed localhost in ESX01 ESX and he joined the field in the context of troubleshooting and client NTP is configured on ESXi, not Windows 2008R2, but Jet lag is less than 30 seconds if not less >
As I said I am new, however I am giving the foregoing experience of logical explanations.
Thanks in advance.
Welcome to the communities...
I don't know if I understand your questions, I tried with my awakening in response to your questions
1. in order to access ESXis using VSphere Client through VCentre, what should I do? I mentioned, that if I try to open a session using the client it does not accept AD ID
You try to access your ESXi host or vCenter server by using AD ID?
However when I click on VSphere Client, it does not accept my AD account and it only accepts the ID of the root for ESXi
Have you checked that you access your vCenter and no ESXi host using vSphere Client?
vCenter is a management software that allows to manage ESXi host. WebClient is only available to manage vCenter server and NO ESXi host
-
Ask about timezone EM (working with HPUX EAT-8)
Hi all
II met a zone of EM error problem.
One of my clients uses our EM (12.1.0.2) installed on Linux 5. It is used to monitor a target of HP - UX. Zone of the HP - UX has been set to 'EAT-8 '. I understand that the time zone of the DB, BONES and the EM should correspond with the target. So I put the time zone of DB and BONES "GMT-8" which must match with 'EAT - 8". However when I do the update of software library in EM, there is error "region of time zone not found"... I've rechecked time DB and BONES, and they perfectly match. If I ignored this error, when I deploy the agent host EM, ago also cautioned against jet lag.
I know if someone knows how to set the time zone when EM working with HPUX EAT - 8?
Thank you.
Best regards
Bess Chung
For a list of time zones you can use, access to the
supportedtzs.lst
file in the
Directory of the central agent./sysman/admin For the deployment of the agent to refer to the pre - req this url zone
http://docs.Oracle.com/CD/E24628_01/install.121/e22624/install_agent.htm#CACJEFJI -
How to calculate the time difference in the two date columns time.
Hi Obiee Experts,
I came back new requirement on obiee 10g.
I have two date columns in my table time, data as below.
StartDate: 18/03/2012-04:40:51
Closing date: 18/03/2012-04:50:55
I want to the output as below (Jet lag).
output
04:40:51 (less)-04:50:55 = 00:10:04
I hope you understand my requirement in OBIEE.
Note: I want to show above the output values in another State for OBIEE10g column.
Please share me your valuable contributions. Urgent appeals.
Thank you
SatyaHi Satya,
Here's another solution. You can try the formula below as it is:
Cast (floor (TIMESTAMPDIFF (sql_tsi_second, '-SNP_SESSION '.))) SESS_BEG, '-SNP_SESSION '. SESS_END) / 3600) as char). ':' ||
Cast (floor (mod (TIMESTAMPDIFF (sql_tsi_second, '-SNP_SESSION '.)))) SESS_BEG, '-SNP_SESSION '. ((SESS_END), 3600) / 60) as char). ':' ||
Cast (mod (TIMESTAMPDIFF (sql_tsi_second, '-SNP_SESSION '.))) SESS_BEG, '-SNP_SESSION '. SESS_END), 60) as char)I would like to know if that's what you're looking for.
Thank you
-
Problem with the Java Web Application
Hello
I have a web application.
The web server is in the time zone CST and the DB server in zone PDT.
When we input a date of the browser say '2011-09-26 + 05:30 ' we who convert in milliseconds and save in DB, which is 1316975400000 for the example above.
When we have to be back the date that we convert milliseconds to date to end of server that is in the time zone PDT and ends in "25/09/2011.
A Solution I found when I did was:
"To pass a Date and a time zone; Jet lag, we stayed was the time zone by default for the customer. On the side server, we have shaped the date by using the zone passed from the client is not using the server's default time zone. »
Please let me know if it is the ideal solution, or there at - it another way to do it.
It is a general problem and responded to many forums. But still I wanted to check if there is another solution for this.
Thank you828549 wrote:
Please let me know if it is the ideal solution, or there at - it another way to do it.Yes: Do not save the zone at all; It simply adds unnecessary objects. And do not convert to milliseconds first. Simply store the date as a SQL Date or Timestamp.
Java dates, and most date from database, I know, are stored as compensation from a point fixed in time ( same point anywhere in the world) then, unless you use a very obscure (and non-standard) database, the JDBC driver must be able to convert a java.sql.Date in internal format of the database without any problems.
Then, when you want, just use the normal methods of the db for the display. They will take care to display the correct time for the local time zone.
Winston
-
change the selection date &; time in PSE 8 Mac/bridge
OK, maybe it's the Jet lag. I downloaded all my vacation photos and realized that I had forgotten to adjust the camera date/time zone time. I remember that earlier versions of Windows PES had the ability to adjust the tour time batch, but I can't find it in CS4 Bridge or PSE 8 Mac. I really want to do it manually for a couple hundred pictures. Is the ability to hide in there somewhere? THX
There are dozens of free utilities that will do, and I think you may even be able to do with automator. Here is an example of a free utility (have not used it myself, caught the first of dozens that came when I googled). I think that Graphic Converter can also do (it can batch change all kinds of EXIF, so I guess that the timestamps are included)
-
Resource requirement vs travel time
Hello
We are facing problem to understand the logic of the CPSA to calculate resource needs, which are not failling in the transit time. We are aware of the concept of jet lag, but could never understand the logic and the reason for having such a logic. If anyone can share its experience on this one here, or is aware of this problem?
Resource Start Date End Date Resource hours/rate schedule daily quantity using Assembly Op Seq Res Seq hours Touch time adjusted hours resource
R1 08/12/2008 06:30 12/9/2008 06:32 10,533333 526 1 10 5.266667 ASSLY_A 10,533333 10.533333
R1 2008-12-09 06:32 12/10/2008 06:32 10,5 10 1 ASSLY_A 525 5.25 10.5 10.5
R1 2008-12-10 06:32 12/11/2008 06:34 10,533333 526 1 10 5.266667 ASSLY_A 10,533333 10.533333
R1 2008-12-11 06:34 12/15/2008 06:34 10.5 525 10 1 3.5 ASSLY_A 10.5 10.5
R1 2008-12-15 06:34 12/16/2008 06:36 10,533333 526 1 10 5.266667 ASSLY_A 10,533333 10.533333
R1 2008-12-16 06:36 12/17/2008 06:36 10.5 525 10 1 ASSLY_A 5.25 10.5 10.5
R1 2008-12-17 06:36 12/18/2008 06:38 10,533333 526 1 10 5.266667 ASSLY_A 10,533333 10.533333
R1 2008-12-18 06:38 12/22/2008 06:38 10.5 525 10 1 3.5 ASSLY_A 10.5 10.5
R1 2008-12-22 06:38 12/23/2008 06:40 10,533333 526 1 10 5.266667 ASSLY_A 10,533333 10.533333
R1 2008-12-23 06:40 12/24/2008 06:40 ASSLY_A 10.5 525 10 1 5.25 10.5 10.5
R1 2008-12-24 06:40 12/24/2008 12:48 6,133333 1 10 6.133333 ASSLY_A 306 6,133333 6.133333
Thank you
NikhilNikhil,
Partha's right to review the calculation of the requirements resource that you have provided. It does not make sense.
It appears your carries out a plan of rules based on decision, is that correct? If so, the plan is to decide the size of the planned order and try to make them fit exactly in the available capacity. There seems to be some rounding problem causing orders complete overnight, but the result is very close.
If you want these orders to always fit in the slots of resource shift, you could attempt to introduce an order for this item modifier. The system will always try to adapt the model of resource annex, but apply your modifiers of the order before the detailed planning phase.
Kevin
Maybe you are looking for
-
Back to 'Vanilla' after messing around with Triple Boot
First of all, you should know, I wonder a "software-handyman' - I LOVE messing around with my MacBook startup files, and sometimes I'll even an exaggeration with which. At the moment I'm running on a bootloader custom (refined) installed on am modifi
-
Upgrade of Acer Aspire 5738 G CPU and RAM?
Hello! I want to spend the CPU and the RAM of the Aspire 5738 G. The Chipset is PM45. Common current C2D [email protected] and RAM CPU is 2x2gb Kingston DDR2 PC2-6400 to 400 MHz. I'm confused because some sources claim that he cannot be upgraded but offic
-
CD/DVD burner with vantec enclosure iHas424Y refreshes new media
Win 7 ultimate 64-bit I ordered a recorder of Y (optiarc rebadge) CD/DVD Lite-on iHAS424 and an external enclosure, VANTEC NST - 530S 2 and try to use them together (SATA to USB2). Links: http://www.Newegg.com/product/product.aspx?item=N82E168173920
-
Help reduce the size of the screen
Hi, somehow my screen size went full size and therefore my Panel disappeared. How can I reduce the size of the screen down to normal?
-
image deployment failure t5570e
Hi all I used HP Easy tools for 2 in pictures t5570e on USB 4 GB (one before making changes and one after) drives. I left the write filter when capturing the first and turned on during the capture of the second. Once done, I tried to apply the second