Jet lag set in gray
I try to use this function to set the time on about 1,000 that I took to Hawaii because I forgot to set my camera.
However, the option is grayed out in the pop up menu in the module cards. Even if I just select a photo, it is always grey.
How to use this feature? Use Lightroom CC on Yosemite. Thank you
Don't know how or if you can do it in the card module, but you can adjust the Capture time in the module library using metadata/Edit capture Time.
Tags: Photoshop Lightroom
Similar Questions
-
Speed setting is grayed out and stuck on the slow mo
I use the iPhone 6s and I shot some footage in slow mo.
I then added clips from high refresh rate both the line however, they are all stuck on the slowest setting and the speed is grayed out.
I restarted the phone and created new projects without result.
Hi Ryan,
You do not have something wrong. This is the expected behavior. Now Clip you cannot change the speed of slow-mo clips.
If there is a feature you want to see added, feel free to start a new thread on the forum.
Best,
Peter Garaway
-
I can't set my resolution. Setting is "gray".
My setting of the resolution is fixed at a minimum and won't allow me to adjust.
How can I activate the address, please?Hi Paul,.
I suggest you to uninstall and reinstall the driver for video card and check.
a. click the Start button, select Control Panel, click system and Maintenanceand then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. in the list, double-click the type of device, then locate the specific device that is not working properly. Right click on the device and then click Properties.
c. click on the driver tab and click Uninstall, and then click OK.
Install the drivers from the following link.
http://us.Acer.com/AC/en/us/content/drivers
Let us know the results. We will be happy to help you further.
-
Ink Jet 4650: setting date
New printer - date and time are incorrect in the display screen. How to fix?
Hello @APD12, greetings!
Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.
I came across your post and would be happy to help you change the date and time on your Officejet 4650 printer. Try the following steps:
- Turn your printer off and then on.
- On the printer Panel, drag the screen to the left and then press the Setup program () icon.
- Select the Preferences menu in the list.
- The first option is 'Date and Time' - select that and change the same.
Please let me know if that solves the problem, or if you need assistance
See you soon
Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!
-
Need help w / Script Groovy (Jet lag)
I'm writing a script groovy/function which displays the difference (DD:HH:MM:SS) between two dates (now rather than a time of inputt'ed).
I run the following script, which seems like it should work, but I get the error referenced below: DATEVAL is an input value. Any idea?
import groovy.time. *.
def now = new Date()
TimeDuration duration = TimeCategory.minus (now, dateValue)
length of back
Error:
the value returned by the Script: "the static value of the type: 'groovy.time.TimeDuration' ' is not assignable to the type of the Script output:" foglight-5 - admin:TimeDuration.
Screenshot:
change your output type of the object, see what it says to type when you test again.
-
Hi guys I have post the same question in the forum of forms but did not get the answer, maybe I post in the wrong forum can someone help me sort the question below? I tried a lot of requests but fail to achieve the hope of result GET expert response form
I have a stored time in varchar2 column 175820 which I imported from access database.SQL > SELECT TO_CHAR (TO_DATE ('175800', 'HH24:MI:SS'), 'HH24:MI:SS') FROM DUAL;
TO_CHAR)
--------
17:58SQL > SELECT TO_CHAR (TO_DATE ('05: 58:00 ',' hh), 'HH') FROM DUAL;
TO_CHAR)
--------
05:58the conversion is ok, but how can I less some time with specific time
How can I at least have the time with 180000 col1, which is (06:00:00)I want less time which is more less 180000 (06:00:00)
175800-180000 its should give the difference 00:02:00 000200 or 0 hours, 2 minutes, 0 seconds. a syntax or a query?
I am using 10 g and 10 g database forms.
ConcerningYou can use EXTRACT. Like this.
SELECT EXTRACT (HOUR OF TO_TIMESTAMP('180000', 'HH24:MI:SS')-TO_TIMESTAMP('175800', 'HH24:MI:SS')) ||) ' HOURS '.
EXTRACT (MINUTE OF TO_TIMESTAMP('180000', 'HH24:MI:SS')-TO_TIMESTAMP('175800', 'HH24:MI:SS')) ||) ' MINUTES '.
EXCERPT ((SECOND FROM TO_TIMESTAMP('180000', 'HH24:MI:SS')-TO_TIMESTAMP('175800', 'HH24:MI:SS')) ||) ' SECONDS
FROM DUAL;
OUTPUT:
0 HOURS 2 MINUTES 0 SECONDS
Post edited by: Partha Sarathy S
-
Quary for Jet lag Date...
Hi guys,.
I want to get the time difference between two dates... Something like below...
e.x.1:-
For example, 2 that it returns only 0 days and 15 hours...
Date1 - 2009-09-04 10:00:00
Date2 - 2009-09-04 12:00:00
Should return
in_days in_hours
1 2
e.x.2:-
Date1 - 2009-09-03 17:00:00
Date2 - 2009-09-04 08:15:00
Should return
in_days in_hours
2 15.25
e.x.3:-
Date1 - 2009-09-03 23:55:00
Date2 - 2009-09-04 00:05:00
Should return
in_days in_hours
2 0.17
Days should be number of oracle calendar days and hours should be rounded to 2 decimals...
I tried using the following formula... but it doesn’t really work...
SELECT
extract(day from numtodsinterval((date1-date2),'day')) in_days,
extract(day from numtodsinterval((date1-date2),'day')) in_hours
FROM MYTABLE;
Can anyone help?
Thank you...
Published by: Napster on September 21, 2009 01:33Napster says:
HI Alex,Thanks for your interest... but I like to count the days that way... so for the days column, you should always get a value > = 1...
So maybe a little more like this...
SQL> ed Wrote file afiedt.buf 1 with t as (select to_date('2009/09/03 23:55:00','YYYY/MM/DD HH24:MI:SS') as date1 2 ,to_date('2009/09/04 00:05:00', 'YYYY/MM/DD HH24:MI:ss') as date2 from dual) 3 -- 4 select round(trunc(date2)-trunc(date1))+1 as days 5 ,to_char(((date2-date1)-(trunc(date2-date1)))*24,'fm90.00') as hours 6* from t SQL> / DAYS HOURS ---------- ------ 2 0.17 SQL>
-
Conversion of jet lag to readable time
Hi all
I just posted a thread about an hour on how to get the difference between the current time and the two tables ago. My results are as follows:
Call ModDate $modtime age
Open 2009-04-09 13:47:08 2.57
The age is this command:
round ((sysdate-to_date (DateMod || modtime, ' YYYY-MM-DDHH24:MI:SS')) * 1440, 2)))
Is it possible to convert the result (2.57) HH24:MI:SS format?I thought that I showed in your original post:
with t as ( select '2009-04-09' ModDate,'13:48:30' ModTime from dual ) select numtodsinterval(sysdate - to_date(ModDate || ' ' || ModTime,'yyyy-mm-dd hh24:mi:ss'),'day') duration from t / DURATION --------------------------------------------------------------------------- +000000000 00:04:34.000000000 SQL>
SY.
-
Date of the bios W530 implemented security/virtualization gray out
Hi, guys
I have a W530, with installation standard i7 and 16G.
I want to activate HV - X and found that they are marked as being disabled and disabled in the BIOS, also date is grayed out too.
Do you know how to fix it? I7 should take over virtualizaion, while times of setting is grayed out, I think it's a safety issue or a bug in the BIOS, but I had the same problem with the BIOS in February 2013 and also update to the latest version of BIOS, 2014, same problem here.
Can anyone help?
do you have the supervisor password value?
-
all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg
Hi Escapermark,
Take a look at these articles to the knowledge base, one should set the gray on the problem:
http://digital.NI.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F
http://digital.NI.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F
http://digital.NI.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument
-
Canon 6 d HDR setting custom 1 or 2. Is this possible?
I can't figure out how to set custom 1 or 2 with hdr. Whenever I select hdr and go for either position. The custom setting gets grayed. Is that what this is?
It seems that it is not possible to save HDR as a custom setting. All Canon cameras, not only the 6 d. custom .He option is grayed out.
-
EP 14 version all grayed out in the menu
Hello
When viewing in the view of several photos in the organizer and a right-click on a single photo or a group of photos, 'version set' is grayed out. If I'm in the same photo, but in a single photo view, right-clicking brings 'version together' as a non-grise option. for this reason, if I want to flatten many games version, I have to open one at a time.
does anyone have a solution?
Thank you.
To be able to use the version sets and battery, you must be in the "detailed" mode: shortcut Ctrl D.
-
Hello
I m facing problems with the license as directed by my previous post, I want to regenerate of the SSL certificates. I installed a fresh installtion time I want to regenerate once more how I can do? I have to run again perfigo config service on the Manager and the server?
Key issues when the CASE is not added to the NAM according to CISCO
Jet lag
Answer: (time between the Manager and the server is only difference 2 sec)
Issuance of SSL certificates
(I want to regenerate once more it is the only option for me)
setting up connectivity
(NAM and NAS are pinging between them and they are accessible from the network)
Thank you
Estela Hi,
To regenerate the certificates you can do from the graphical interface of the cam to CAM cert:
And since the GUI of the heap for the cert of CASES:
However, please keep in mind that to be able to add the CASE to the CAM, you need valid license installed on the CAM CASE, time sync, and depending on the version, you must also make the CASE for trust in the cert CAM and vice versa.
All of this is documented on the documents I have inspectors out.
HTH,
Tiago--
If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
-
Ask about timezone EM (working with HPUX EAT-8)
Hi all
II met a zone of EM error problem.
One of my clients uses our EM (12.1.0.2) installed on Linux 5. It is used to monitor a target of HP - UX. Zone of the HP - UX has been set to 'EAT-8 '. I understand that the time zone of the DB, BONES and the EM should correspond with the target. So I put the time zone of DB and BONES "GMT-8" which must match with 'EAT - 8". However when I do the update of software library in EM, there is error "region of time zone not found"... I've rechecked time DB and BONES, and they perfectly match. If I ignored this error, when I deploy the agent host EM, ago also cautioned against jet lag.
I know if someone knows how to set the time zone when EM working with HPUX EAT - 8?
Thank you.
Best regards
Bess Chung
For a list of time zones you can use, access to the
supportedtzs.lst
file in the
Directory of the central agent./sysman/admin For the deployment of the agent to refer to the pre - req this url zone
http://docs.Oracle.com/CD/E24628_01/install.121/e22624/install_agent.htm#CACJEFJI -
Helmet Jaybird not matching not...
Helmet Jaybird not matching not...
iPhone 7 more bluetooth keeps spinning, no device detected
Hello qwer134,
Thank you for using communities of Apple Support. And I see that you just got a new iPhone 7 more, congratulations! Always exciting when you get a new iPhone.
I see that your Jaybird bluetooth headphones are having difficulties if the pairing on your iPhone. I definitely want to make sure that I can pair my headset to my iPhone, I use mine a lot. Let's see how I can help.
Please see the article get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, specifically these sections:
First try these steps
- Make sure that your device iOS and Bluetooth Accessory are close together.
- Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
- Restart your Bluetooth accessory.
- Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
- On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
- Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connect again.
If you still cannot match or connect your Bluetooth accessory
Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device.
Contact the Apple Support if you have any of these problems:
- You can't turn on Bluetooth or the setting is gray.
- You cannot connect any Bluetooth accessories with your device.
- The accessory manufacturer has confirmed that your accessory works properly.
To learn more
Find out what Bluetooth, profiles you can use with your device.
Once you have gone through these steps, see if you get the same result when connecting.
Have a great day!
Maybe you are looking for
-
Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing batteries (and not connect to the computer; battery tested good tester)?
-
How to I completely remove MacKeeper to my MacBook Pro
I'm running ver El Capitan 10.11.3. After installing MacKeeper, I realized that it is malware. How do I uninstall completely from my MacBook Pro?
-
HP Pavilion Notebook 15-p035nd: Bluetooth does not
Measures taken before posting: -Update driver Bluetooth through the support of 3hp.com -several reboots -disabled + material bluetooth enabled -several good bluetooth devices doublechecks works next to the laptop: work and the pair with eachother, bu
-
I changed the resolution of the screen now, every thing is so small I can't read anything
original title: I accidentally changed my screen resolution that now everything is so small I can't read whatever it is, please help me. Thank you. Mack I have the screen resolution changed accidentally that now everything is small I can't read any
-
How separate/remove 6 Vsphere host of VCSA dead/failure
I found this guide:ResolutionThe solution to this problem is to separate the system server ESXi from the vCenter Server system. To disassociate the host, follow these steps:1. using the vSphere Client, connect directly to the host ESXi 5.0 system.2.