Join the AP 1010 evil WLC
Hi all
I have 1 WISN and 1 4402-50 and running on OS4.1.185
They name are WISN-1, WISN-2, 4402-50.
The AP received ip from DHCP server.
I have set up wlc primary is 4402-50, secondary wlc is WISN-2 and tertiary wlc is WISN-1.
But, the AP1010 always join secondary and tertiary is not to join primary.
Any at Issus even?
Thank you
Stephen
Well, it seems that it is not a response to join... once again, you have everything on the WISN in which you can move the 4400 or the other way around the ap. This will identify if mobility work.
If you have any access point on the 4400, try to ping the AP IP address manager... you shouldn't be able to. Disconnect the 4400 of the network and see if you can test this address. You can have a duplicate address for the AP Manager that could cause the output you see.
Tags: Cisco Wireless
Similar Questions
-
The SSID on Cisco WLC support no.
Hi all
Can you please help me to provide details on the following Cisco wireless controller?
1. no support SSID on Cisco WLC
2. is it possible to limit the SSID on the access point (for example, I have 10 SSID configured on the controller, I want 10 first access points using SSID (SSID 1-5) and rest of the AP SSID 6-10)
Thank you
Jamal
Hi Jamal,.
Just to add to the great info of Robert (+ 5 points Robert)
The feature you're looking for is called WLAN substitute in versions 4.x WLC.
Allowing substitution WLAN
By default, all defined WLAN transmission on the controller access points. However, you can use WLAN editable to select WLAN is transmitted and who are not on a per access point basis. For example, you can use WLAN to control override goes where in the guest WLAN network or you can use it to disable a specific WLAN in a certain area of the network.
This doc.
http://www.Cisco.com/en/us/docs/wireless/controller/4.0/Configuration/Guide/c40wlan.html#wp1114777
Once you create a new WLAN, WLAN > page edition for the new WLAN. In this page, you can set various parameters specific to this general policy, RADIUS servers, political security WLAN key, and 802.1 x settings.
* Check Admin status under general strategies to activate the WLAN. If you want AP broadcast the SSID in beacon frames, check the SSID broadcast.
Note: You can configure up to 16 WLAN on the controller. The Cisco WLAN Solution can control up to sixteen WLAN for Lightweight APs. Each WLAN has an ID separated from WLAN (1 to 16), a WLAN SSID (name of the WLAN) separate and can be assigned to single security policies. Lightweight APs broadcast all Cisco WIFI WLAN SSID Solution assets and apply the policies that you set for each WLAN.
The good doc.
In versions 5.x, you will use AP groups, because in versions 5.x WLC, WLAN substitute has been replaced by the "Groups of AP" feature;
Creation of groups access Point
After all the access points have joined the controller, you can create up to 150 groups of access point and assign up to 16 local wireless networks in each group. Each access point announces that the WLAN enabled that belong to his group of access point. The access point no announcement not disabled WLAN in its access point group or WLAN that belong to another group.
http://www.Cisco.com/en/us/docs/wireless/controller/5.2/configuration/guide/c52wlan.html#wp1128591
To learn more about George video AP discover excellent groups
http://www.my80211.com/Cisco-Labs/2009/3/22/Cisco-AP-group-nugget.html
I hope this helps!
Rob
-
Hello
I currently have a WLC 4402 and 18 AP 1131. Everything works fine.
I would add 2 AP to expand coverage. I have 2 1042 AP I want to add. How?
I plugged my wifi vlan AP, and it gets its IP address given by the WLC (which is DHCP). I see it next to another AP on the WLC controller > internal DHCP server > allocated DHCP leases
But all this after I don't know where to go...
Can you help me?
Thank you.Just for info... We have a bug in show stopper on the version of the software that you are running DHCP on WLC-related...
Please move the DHCP server as any layer 3 device... and I see that you plan to use APs 1040,
1040 series APs needs the minimum WLC software to 7.0. and more... Please update the WLC to 7.0.116 and this will solve the DHCP bug as the PA joining the WLC...
Let me know how it works for you and don't forget to evaluate the useful post!
Concerning
Surendra
-
If I were a bank how do I join the community to pay apple?
If I were a bank how do I join the community to pay apple?
Hello
As a first step, it may be best to contact the merchant support Apple pay and explain the nature of your request:
-
I can't find out how to join the mozilla forum
For later use, you can click the button "Volunteer for Mozilla Support" on the support.mozilla.org page.
-
In Ver12 the opportunity to join the tracks disappeared
How can I get the opportunity to join the tracks back? He disappeared with Ver 12
12 iTunes for Mac: import songs from CD - http://support.apple.com/kb/PH19607
12 tip on join iTunes titles location https://discussions.apple.com/message/28270415#28270415
Unite tip - https://discussions.apple.com/message/28661274#28661274 - you can reach all or a subset of titles but they must be consecutive and must be in ascending order in manual mode even if another mode is displayed in the right order. So only appears the join option.
May 2016 iTunes 12.4 (nothing really changed) - https://discussions.apple.com/thread/7578177
-
I googled and upon my departure to the top of page, under Google search space, that question is beneath him.
What kind of Web you want? Join the Firefox users around the world, shape its future. I don't like it and want to remove it. I did it ask me, but that it contains to appear?
Thank youHi Demberg, regarding your problem of message on the home page of firefox, I think that not fair to say that you can't remove it. Indeed, it is a message to get involved.
I hope I've been helpful.
romsdu81
-
Joined the community of Apple support by mistake
While trying to find the answer to a problem with iTunes, I joined the community of apple support by mistake thinking this, he had to join the blog. I have little experience with support questions and desire to retire from this. My email is now get 100 more per day - not that I can help with any questions.
Suggestions welcome.
Just click on your user name, and it will take you to your profile screen. Click on Preferences and disable the email option. You won't get email more.
See you soon,.
GB
-
Airport Extreme is not able to join the network
I'm trying to implement a repurposed Airport extreme in Bridge mode. Before, I was always able to use the "join the network" option, but now it only gives me the option to create, expand or inactive. I have a model a1521 (6th generation) that I have as my main router. I also have an express airport of old I have in Bridge mode. I am trying to add the a1143 (3rd generation) to the right network and put it in Bridge mode. Is intended to be used as a wireless print server until I can move my printer and the 6th gen at the same location. This option has been removed? am just missing something?
Apple has removed the option "Register" for the AirPort Extreme (and Time Capsule) when it introduced version 6.x of the AirPort with Lion (10.7.3) utility about 3 years ago.
If you have... or you can borrow for 15-20 minutes... a former Mac under Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with the utility AirPort for Windows installed on the device... you might be able to manually configure the old A1143 AirPort Extreme to 'join' the network using a version 5.x of AirPort Utility.
-
What I really join the music Apple to listen to the music I want to listen to?
What I really join the music Apple to listen to the music I want to hear?
# You can buy your own music without subscription (Apple's music).
-
Firefox fail to join the doc in e-mail indicating that it might be due to proxy or firewall and to ask for the classic Loader help
This problem was earlier not existing does not
This isn't the problem with internet exploreI have already updated to version 9.0.1 and I can't yet nothing attached to an e-mail. I did have this problem with a previous version of Firefox. What did you do to the system? It's very annoying.
-
I don't want to join the Apple's music. Please refund my account!
Please refund my account. I don't want to join the Apple music
Terri
***********.com
< Email published by host >
You do not discuss Apple here, this is a user to user support forum. You must contact iTunes support. http://www.Apple.com/EMEA/support/iTunes/contact.html
-
Satellite P100: XP Pro Media Center - unable to join the domain
Recently bought a P100 with XP Pro OS but I'm not to be able to join the field to work correctly. Normally, to create a new account on the SBS 2003 server, then from the PC "join the domain.
Clues?
PeterHello
You should better check the Small Business Server site. You will find FAQS:
http://www.smallbizserver.NET/Also check this:
http://www.experts-exchange.com/Operating_Systems/SBS_Small_Business_Server/Hot_Solutions_1.html -
px12-350r unable to join the domain - what now?
Hi all!
I hope you can give me some advice because at the moment I'm in a really silly situation, being probably locked out of my Iomega px12-350r.
Here is what happened:
* The device was successfully linked to my domain name Microsoft AD and worked with this config at least a year.
* I expanded the storage matrix, 2 days adding 2 drives. Everything went well and the end of the expansion, the new total disk space is displayed correctly in the web administration interface.
* After this, I restarted the device. After the reboot, I couldn't connect to the device more using my domain account. This account had administrative rights on the NAS and I connected on the NAS using this account before.
* I don't alter the domain infrastructure.
* I know that the device cannot join the domain more because I enabled e-mail notifications and he continues to send me "unable to join the domain".
I have already tried:
* Connection using the usual accounts: doesn't seem to work once the device is connected to a domain.
* Connection via SSH. Does not work, probably for the same reason as above.
I wasn't yet:
* The user manual mentions reset the admin password by pressing the reset on the back button. But this will only reset config (I'd be okay with it), or it will erase the data on the drives as well?
I'm from the Germany. Despite having purchased a service plan 24 x 7 hotline support German will only redirect me to the hotline American which claim to do only office, no SIN px12. I'm kinda in the middle of nowhere now. ;-)
Thanks for your help!
Best regards
Florian
Hi André,.
I fixed it without reboot - by chance.
In a desperate attempt, I tried to connect using the domain administrator account - and it worked! I don't remember giving any px12 admin permissions to this user and I certainly don't connect to the device using this user before. But the account has permissions to create computer accounts in the ad, and in the moment when I logged in the computer account of the AD px12 updated password.
I tell myself that the px12 has used the account admin for re - joining the domain. From the web interface, I could now do a sync AD and after that, all users of domain reworked.
So, if anyone has the same problem, try connecting the device with any account that has administrative rights on the whole of the field, even if you have not used the account on the device before. It can work for you, too.
Local accounts still do not work. I think that if the device is connected to a domain and the domain link is broken permanently, so it's only the reset button.
Andrew Merci for your support!
Best regards
Florian
-
Motorcycle deny non-American owners the right to join the PNM
Like other owners of non-us I HAV been denied the right to join the feedback of Motorola (MFN) network.
This confirms the thought racist and discriminating motorcycle against the owners other than the United States.
Maybe you are looking for
-
Problem of airtime with the same SSID
I often use AirPlay to my iPhone and iTunes on my PC to play for my (home theater installation) AVR - 1506 Marantz. Configuring wifi in our House are a router/modem to the ISP and an Asus RT-N56U (in access point mode) with DIFFERENT SSID to which I
-
Hi guys,. I've been putting upward with it for some time, but as a result of not being able to remedy, I am tender hand to the community. After El Capitan have reinstalled several times, I get the same problem again and again in the 2 accounts, that
-
Windows 7 location of files in Oulook
After I installed Windows 7 I wanted to copy my previous Outlook file ointo my new folder of Outlook autocomplete. Can you tell me where is the default .n2k file, as I find it and can't seem to find extensions of files (how to activate that?)?
-
Hi Experts,I have a requirement to get the cursor should point to the first line instead of pointing to the third row. To the help of code below, my cursor points to the third row. Please put some light on it to reach the requirementXXCLKTestVOImpl v
-
On OSX Yosemite, it cannot open
It won't let me open after affects CS6 v11.0. He said: 'You cannot use this version of the "Adobe After Effects CS6.app" application with this version of Mac OS X.' help, please.