Windows 7 location of files in Oulook

Similar Questions

• cannot locate the file to install silverlight, windows 7 64 bit, c:\6f4c8317905ddd8e80bc5f1b238f5ea2\

  Every time it says I need to update however windows update fails, silverlight site stand alone fails to Setup. Say Windows cannot locate the file, or can't access the Setup program. I've tried everything I know including UN-installing and cannot locate the file.

  Hi Dstek,

  This could be due to installation damaged the existing version of Silverlight on the computer. So, must uninstall completely from the computer and then try to reinstall.

  I suggest you refer to the Microsoft KB Article below, try the troubleshooting steps in it and see if that solves the problem.

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  Hope this solves the problem. Please get back to us with the result.

• using projectors in a finder window does not always files

  I've recently updated to El Capitan. I can't using spotlight in a finder window to locate the files.

  Sometimes it works, sometimes not.

  Here's the situation:

  I assigns a number to each project that I'm working. The name of each file in the project begins with this number. For example project 3639 includes files named 3639.html, 3639 - 1.jpg, 3639 - 2.jpg and so on. They are located in different folders on the hard drive. To display a list of them all in one place I open a finder window, type 3639 in the spotlight box and voila - there is a list of all my project files.

  It works as usual for some files, but not others. Specifically the spot will not show me files whose names begin with 1 or 2 and are over 3 digits long. By example, if I search for 2344 I get NO RESULTS. But if I look for 234 and then I get a long list that includes the files starting with 2344. So I can scroll down and get the files I need, just ignoring all other files, but it adds the time and trouble to my file maintenance tasks, and it seems strange - why spotlight can find some files but not others.

  It took me all morning to get to this day. At first, I though that spot just didn't work at all. I searched 2344 and saw nothing, even though I know that the files are there. I can go to them in their respective folders, see them, then open them. But I can just no longer use spotlight to easily group and it makes me very frustrated!

  Since then, I have a clumsy work around maybe that's considered the issue is resolved. Unless someone has a cleaner solution.

  Try EasyFind, it's simple and much more effective research Spotlight IMO.

  http://www.DEVONtechnologies.com/download/products.html

• My Windows XP Professional cannot update SP3 because of lack of PRO11. Or the MSI files and I have the original MS Office 2003 CD to locate its files. Help, please.

  My Windows XP Professional cannot update SP3 because of lack of PRO11. Or the MSI files and I have the original MS Office 2003 CD to locate its files.  Help, please.

  Hello

  1. when exactly you get this error message? While trying to install service pack 3 or while trying to install a windows update?
  2. What is the full and exact error message?

  Please answer these questions and tell us more about the issue, it could help us help you better.

  See the bottom of the articles that might help you.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

• How do you remove Trojan horse from the Windows\system\svchost.exe file located?

  How do you remove Trojan horse from the Windows\system\svchost.exe file located? I worked on this problem for 5 days. I've tried everything except wipe the hard drive completely and starting over. Windows xp pro sp3

  I bought a new diagnosis program and quarantined the virus once it has been identified. I tried to remove the virus in several ways, but it comes back. The best way that I thought would work enter safe mode and by changing the attributes of the svchost.exe file and then delete and checked the registry AWI hwo to the Web site, but it continues to be problematic.

  Hello

  During the uninstallation of antivirus/antispyware/security programs always check for an uninstall
  tool and/or removal instructions special to avoid leftovers.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146
  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y<-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Installation of 8.1 of Windows 8 by using the windows 8.1 image file located on USB

  I want to do the Windows Installation 8.1 do I need key to install the pre-installed Windows 8 windows using the windows 8.1 image file located on USB downloaded from microsoft.

  Hi Lovina,

  We are here to help.

  Installation of Windows 8.1 using the image file is on your key USB can be activated without the product key.

  You can also consider to upgrade your computer to the latest version of Windows, Windows 10. Check out this article for more of Windows features 10

  Please do not hesitate to contact us if you need assistance.

• I updated to XP from SP1 to SP2 and rec'd an investigation re firewall to block xrxfptlt. I can't locate any file containing this sequence

  Original title: what is xrxfptlt?

  I updated to XP from SP1 to SP2 and rec'd an investigation re firewall to block xrxfptlt. I can't locate any file containing this sequence, including any system or hidden files. A search in the registry also has given no result for this combination of letters. Does anyone have an idea?

  Hello

  You are probably referring to xrxftplt.exe. xrxftplt.exe is located in a subfolder of "C:\Program Files".

  XrxFTPLt.exe file is a Windows core system file. The program is not visible. Start the application at Windows startup (see registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run). Program has no file description. The file is a reliable file from Microsoft. The program uses ports to connect to LAN or Internet. XrxFTPLt.exe is able to connect to the Internet.

  However, some malware camouflage themselves as XrxFTPLt.exe, particularly if they are located in the folder c:\windows or c:\windows\system32. Check the XrxFTPLt.exe process on your computer either on the pest.

  I recommend that you use the Microsoft Safety Scanner to run a full scan on your computer to verify if this is a malicious file.

  Note: You may lose any infected files by eliminating malware.

• Tried to install iTunes 10... error message... couldn't access network location \common files\.

  Hi, I have really not much about computers, I'm sorry. I tried looking for answers myself but I do not understand much of the language and I don't know if I read the appropriate information.

  I wanted to update my iTunes on my computer (Windows XP) but it doesn't seem to work when I searched for upgrades and click Yes, I want to update. Nothing happened.

  So I uninstalled my iTunes and I tried to install iTunes 10. But when I did, I got an error message with the title of iTunes + QuickTime... say... couldn't access network location \common files\.

  I uninstalled QuickTime, hoping that would help, but of course not knowing what I was doing. It did not help.

  What I Googled, it seemed I had to look at something in the term. I arrived at the spot but have not seen any obvious errors. But then again, I had really no idea what I was looking at!

  I would really appreciate if someone could help me with a language very very basic.

  Thank you very much.
  -Emma.

  It is a Forum Vista, not XP one, maybe you should try this Forum because there will be more applicable to your operating system.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  See if these items are easy to follow?

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7 (also for the links of XP).
  http://support.Apple.com/kb/HT1923

  Internal error: failed to get the path of the file directory common 64-bit
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/dc02d25a-E26d-4F74-a8d0-73858b5a0d07

  If you read the link above here is a relevant .jpg of XP
  http://CID-db58e4a03b3dccab.Office.live.com/self.aspx/public/current%20XP.jpg

  Have you tried the Itunes forum to see if there are similar stories there?
  iTunes for Windows
  http://discussions.Apple.com/category.jspa?categoryID=150

• Error when you try to open a Windows Movie Maker. MSWMM file: cannot be opened because it is not a valid windows movie maker project file

  Help! Says the file can't be flat, .mswmm file, but the program made the film.

  I used the Windows to make a film, I scanned 458 pictures, done my book of stories, etc. with music - took a month... I "published" and now when I go to open it it says ' cannot be opened because it is not a valid windows movie maker project file? But the Director did, now I can't open it to all, it has an .mswmm file extension! Help, it's a gift for my dad who is going to be 70 and I have not yet a month to make it again!

  Hi, I'm having a similar problem but have 1 idea as to why I can't open my .mswmm file. I have two xp machines running sp3, but a pro and a home edition if it matters.

  the file.mswmm I am trying to open was created on the moviemaker version 2.1.4028.0 and it still works fine on this machine. On the xp pro machine, he is Director of windows 2.1.4026.0.

  So I try to install the movie maker 28 to my other machine I have a lot of files created with the 28 I want to be able to change on the other computer.

  =============================================
  The project .mswmm file is best to use the system that created
  because it takes all the source files... Video clips, Photos, music
  files... always be available at the original location.

  Moving from one computer to another can work if you move as best
  all of the source files. When you open the .mswmm file you will see
  Xs red instead of thumbnails of the source but if you right click the red Xs
  You should be able to navigate to the new location of the files sources and re-
  establish the path.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• Creation of DVD Windows closes when the file is moved to the work menu

  "try burning .avi files to dvd using create DVD windows and when I drag the file to the creation of dvd or even to open it manually through the import that it cancels and closes saying ' stopped working '.

  Hi emwercs,

  Follow the instructions below that may help you solve the problem of Windows DVD maker.

  Method 1:

  Create DVD Windows stops working due to incompatibility with one or several codec files that are obsolete or incompatible with the project or the DVD Maker software itself.

  (Obsolete or incompatible) Codec files must be located and renamed to resolve the issue.

  1. open the start menu and type event viewer in the start menu search bar. Open event viewer from the menu.
  2. in the case of Viewer click Windows logs in the left panel
  3. click on application under Windows Logs logs
  4. search for the error messages listed in the event viewer window Central Panel and double-click on the error to check if it log is linked to the creation of DVD.

  Example of error log:

  Signature of the problem
  Problem event name: APPCRASH
  Application name: DVDMaker.exe
  Application version: 6.0.6000.16386
  Application timestamp: 4549b5b0
  Fault Module name: nevideohd.ax
  Fault Module Version: 4.6.15.0
  Timestamp of Module error: 459bb828
  Exception code: c0000005
  Exception offset: 00008b 89
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1062

  5 locate the fault Module name, it must be a file with the extension or dll.
  6 once identified the name of the file, try to locate the file in the C:/Windows/System32 folder.
  (Please click on view the content if the files do not appear automatically).
  7. If the files are not listed in the System32 folder, find the file with search containing the files and system files.
  8 find the file and rename it.
  9. check if the problem persists. If the problem persists and the error message appears again, find the new file which is the origin of the problem of event, error log viewer.

  Method 2:

  You can also uninstall any third party burning programs and software of the codec of programs and features that these could cause the error.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Error message: Windows cannot open this file

  Whenever I click one of my contacts in my contacts folder, I get a message that says Windows cannot open this file and gives me the choice to open with another program or search the Internet for a program to open my file of contacts.  Can someone help me with this please?

  Right-click on any contact, and then click Open with...  Then select Windows Contacts (it may have been changed to another program) and check the box at the bottom that says always use this program to open this type of file, and then click OK.  If the Windows Contacts is not listed, click Browse and find the main executable file for Windows Contacts add the program then select it and check the button.  To help you find this file, go to the Windows Contacts shortcut in the menu start / all programs and right click on it and find out the location of the target - is where you ought to watch.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows could not transfer files. An address incompatible with the requested protocol was used.

  Microsoft. It's so hard to get where you want to go on the site.

  I wish they still had the cat where you enter just a few things, and for free, it instantly opens a window of instant messaging to chat with microsoft.

  Well, I have a dongle bt USB and when I right click and click send a file, it gives an error

  Windows could not transfer files. An address incompatible with the requested protocol was used.

  With windows xp, I plug it and he can move 2 drivers, "microsoft bluetooth enumerator" and "generic bluetooth radio".

  in windows 7, it installs the same 2 drivers

  I pair the device from the phone and it didn't work. while I was looking for the computer and it does not even, but file transfer

  It works totally fine XP and with the same drivers! just different os versions.

  I went to Device Manager, click on set to update driver and he know that later is installed

  BTW, it's a generic radio bt, and it was $10 do9ller micro dongle.

  However, there is no brand name.

  but it works under windows xp? but not 7?

  Windows xp and windows 7 are duel boot, so it's the same material, b/c windows xp and windows 7 is on the same hardware

  If I use the VM vmware, I can transfer files

  Microsoft sucks... I mean except xp. He is old, but it's the best version of windows there, Runnin' on minimum 16 MB of ram and 400 mhz cpu... I luv xp, no more errors

  Hello

  Check if the same device works fine on another computer with Windows 7 installed. Also, try to send files from the phone to the PC and check what is happening.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  You can try the steps below and check if that helps get the Bluetooth dongle to work.

  (a) click Start and then click Run.

  (b) type regedit and then click OK.

  (c) locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}

  (d) right click on the folder, click on delete.

  (e) exit and restart

  Now, try to find your device and send the file. It should work.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Part two question about the profile of Windows Speech recognition (WSR) files.

  one) where the profile for Windows Speech recognition (WSR) stored?

  (b) for resettlement took place, I save my entire folder "users". Should I always have to use WSRProfile to back up or will be my WSRProfile safely copied and restored with this action?

  Thank you

  Tank

  I wish I could tell you the exact location where the profile is stored.  I wish I could tell you the exact name of the file is stored as (perhaps something like.) WSRProfile).  It seems that this information is very secretive to say the least.

  If (and I guess they are stored somewhere in your profile) you copy your profile manually or with any Windows Easy Transfer tool. then everything in this profile will be copied across.

  If you use the Windows speech recognition profile tool to import or export profiles of speech then they will do the job by taking the default location for files and placing them in the location by default on the destination computer.

  How to back up and restore your Windows speech recognition profile
  http://www.vista4beginners.com/backup-restore-Windows-speech-recognition-profile

  Windows speech recognition: How To profit From its Configuration Options Advanced

  http://www.wintuts.com/Windows-speech-recognition-advanced-configuration-options

  Transfer profiles from one computer to another Windows speech recognition
  http://blogs.msdn.com/b/robch/archive/2007/02/15/transferring-Windows-speech-recognition-profiles-from-one-machine-to-another.aspx

  How to copy the file from Microsoft's speech recognition on another computer training
  http://www.ehow.com/how_6632240_copy-training-file-another-computer.html

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.