Similar Questions

• How can I make sure that my music on my Ipod Classic is not lost forever, if it breaks down?

  How can I make sure that my library of music on my Ipod Classic is not lost forever, if it breaks down?

  Back it up.

  Your music library should never exist only on your iPod.  It must be present on a computer in iTunes, and to be sure it must be saved on an external drive also.

  If your library no longer exists on your computer for whatever, reason, you need to extract the iPod.

  turingtest2 offers you several ways to do this in his user tip found here:

  Recover your iTunes from your iPod or an iOS device

• Firefox hangs and I don't know where to find "subject: breaks down.

  In recent weeks, Firefox started to plant several times and quit unexpectedly - especially when I click to open it. I often get the annoying message "well, this is embarrassing." More useless. I sent the report of the accident and expect to hear from you as to why I have problems, but nothing happens. I can't find how to locate the ' topic: breaks down ' in the address bar. Can you explain this.

  On a Mac, it's Cmd + L to go to the address bar.

  If you have submitted incident Breakpad reports then it would help if you post the ID of one or more reports of incidents Breakpad.
  You can find the ID of the submitted crash reports on the Subject: hangs page.
  You can open the Subject: hangs page through the address bar just like you open a Web site (topic: is a protocol for accessing the internal pages).
  A GUID crash looks like: bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx

  You can copy and paste the links or the crash IDs of some of the most recent accidents, and post them on this forum.

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

• If my computer breaks down how am I supposed to get my files that are saved back.

  If my computer breaks down how am I supposed to get my files that are saved back.

  Barjakes

  What operating system are you currently using?
  If you use Windows 7 try from here.
  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

• After clean reinstall XP 2, IE6 continues to break down, Windows Update does not work, so I am unable to download 3 XP and IE8!

  Need help to diagnose why, after a clean reinstall of original CD XP2, IE6 continues to break down, and Windows Update is not working correctly,

  which means that I am unable to download XP 3 service pack or IE8.

  Download sp3 from HERE. Save the file to your desktop. Double-click the file to install sp3 manually.

  Edit: Link fixed.

• Explorer.exe (I think) breaks down regularly

  Hello

  First, I will begin by saying that I am not entirely sure of the weather or not this is the right category. So, I want to apologize if it is not.

  My problem is that explorer.exe (or at least I think it's explorer.exe) breaks down regularly. It happens when I am opening the files, making things with files (such as copy, rename, Zipper,...), or simply at random intervals. Then the image of the desktop background and the icons on the desktop disappear, leaving me with a purple background. The same happens for all the icons and the clock in the taskbar.

  Usually, it recovers after a few seconds, open records in the process of closing. When it isn't, it can be retrieved manually by running explorer.exe in Task Manager (this is why I suspect task manager).

  Sometimes it seems to get into a loop of crash, constantly crashing, recovering a few seconds later and then crashing again. This can be stopped by killink 'Windows verkenner' task, or translated: 'Windows Explorer' in the Task Manager. From, it still often causes only to crash again then, so then I have to use the cmd to do what I would normally be in the Solution Explorer, or restart my computer hoping that it will work next time.

  While this problem is not very harmful to my computer (or so I think), it's getting very annoying, especially since it ig going more frequently over time.

  I have already disabled the windows updates, because the problem always seems to worsen after updates.

  He has especially much worse after upgrade my computer to windows 8.1 (which was already earlier). He never continued to work for a minute then, and I did a system recovery to restore windows 8.0.

  I had this problem basically since I've had this laptop (which was in September), but I have not found a solution for this. I've done various analyses of viruses and malware, and I'm sure that it is not caused by a virus.

  If anyone knows a fix work for this, so I'd be very happy.

  Thanks in advance.

  ~ Ben

  If Windows 8 comes with the laptop, then you must take the issue by the manufacturer of the laptop.

  There may be a policy for downgrading to Windows 7.

  What you are experiencing with Windows 8 is not typical and I would recommend to take up the issue with the manufacturer of the laptop because it's their responsibility, under warranty, to make sure everything is working properly, including the software.

• Directory to the/var/log/apache2 vRA device is not even after installing successfully

  VMware KB: Log locations for VMware vRealize Automation 7.x

  

  Installation of vRA succeeded him, but there is no ' / var/log/apache2 / * "vRA device." So I can't check if the apache is working properly. Everyone sees this directory?

  Apache is more used than the reverse proxy (we now use HAProxy), that the document should be updated.

  Thank you shouting it!

  Grant

• Premiere Pro CS6 (OSX 10.10.4) breaks down repeatedly

  After upgrading to OSX 10.10.4 my CS6 Pro first breaks down during editing or rendering video clips.

  You don't understand that CS6 going on 4 years and that it was not designed for the latest Mac OS?

  Below has been all previous MacOS, but now it seems that 10.10.4 cause MORE problems

  - and a possible (at least for Premiere Pro) difficulty https://forums.adobe.com/thread/1891705

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

• In version10.1.5 how I would break down a large PDF file and then save each page which is the biggest file?

  In version10.1.5 how I would break down a large PDF file and then save each page which is the biggest file?

  If you mean Adobe Reader 10.1.5 (you tell what you have) then you can't. This would require the full version of Acrobat.

• Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the old dr

  I asked a question here before and got a response, so I'm back. Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the older driver

  I couldn't on the forum last night! And today too busy...

  I think that a reinstallation is the only solution for the preset errors prober TEA that has been reported. Activation etc problems can be problems, if you have a subscription to the CC, try all the options to sign out/in on the cloud first Office.

• What happens if my external drive "working files" breaks down?

  I use two external drives to save and back up my files.  The files organized, edited the reader of 'work'.  If the drive working breaks down, how can I restore it from the player of "backup" that contains just the original, unmodified, the files placed in folders by date of importation?  I realize that catalogue contains all the changes, but how to return to the Organization?  Anyone using a Raid 1 configuration for two disks mirrored?

  Maybe I don't make myself clear. How to take the 'back-up' disc, containing original photos not published, ordered by date of import and convert the disc format 'work' catalogue in the LR4 will recognize?

  It's great that you think about it now, instead of this disaster.  Play well!

  The "second copy" option in the dialog box import is ideal for temporary backup, while the pictures in your main backup system, but it is a nightmare to restore from.  There are options to rearrange disaster, but it is better to avoid.

  Rather than RAID1, I would suggest looking at backup synchronization software or a file - I love Vice Versa on Windows or Chronosync on Mac - to keep a copy in the mirror of the work unit.  If you use RAID1 and photo gets deleted or damaged, it is immediately deleted/damaged on the second disk RAID, while the file backup/synchronization software would go less often, giving you a chance to recover it.  Many also offer one option 'archive' for deleted photos, moving them to another folder.

• Extremely strange: Ipa works for the 'debugging device' but breaks down for the "deployment."

  Hello
  In both types of investment promotion, the application starts well, but if the app is respected for the deployment, it hangs at this point where the data is downloaded and written in a database. In debug mode, the app works very well every time and never shows an error. I'm completely stumped. Thank you. I really need your help.

  Hi Luke,.

  Can you please share your project with me? It would be useful in the investigation of the issue. You can attach your project here or send it to me akharban (at) adobe (dot) com.

• Windows XP - Ask toolbar all movies / games run slower and the sound breaks down constantly

  Original title: help

  I have an ibm laptop and windows xp. After that I installed the Ask toolbar all movies / games run more slowly and the sound is broken down permanently. How can I fix this?

  Hi calludinmace,

  Sorry to hear about the issue. From what I understand, movies and games on the computer to run slowly and his bodyguard break.

  1. This problem started to happen after an activity especially on the computer?
  2. Are these movies online or stored on CD or on the computer?
  3. In addition, are the games online or installed on the computer?

  You can update the computer with the latest drivers in particular sounds, video and chipset drivers. Log computer manufacturer site to do so.

  In addition, update the computer with the latest version of Flash Player. Visit this link to install the latest version.

  Here's a very useful article that can be of additional assistance.

  Do not respond if these suggestions don't help you.

• ACS 3.2 breaks down when the RDBMS isn't available.

  Someone knows a problem connecting equipment that auths to ACS 3.2 if their ACS (ODBC) login record is down?

  I have not checked this bug yet but we have picked up our computer (postgresql) of ODBC logging, it was moved to another building. Throughout the weekend that the computer was down and I couldn't log into any of my ACS devices controlled (switches, AS5200). As soon as the computer was brought back online connections have started working again.

  I did not see this listed in the notes, but I may have missed. In any case I'm check if anyone else has experienced this problem and ask yourself how do I solve this problem (at least it was a bad surprise, luckly I hadn't started wireless auth to the GBA unit)

  Thank you

  Wes

  It is likely, although probably not documented anywhere.

  At the time current ACS works as follows:

  When ODBC is configured, ACS blocks authentication until the

  Log ODBC is done or has failed due to the delay. The failure of ODBC timeout

  occurs when the external database is unreachable. In this case, the

  authentication fails if this delay is longer than the

  timeout for the device.

  Workaround to activate authentication despite the failure of logging is to increase the radius-server on the device/NAS (for example time-out

  5 to 10 seconds). It can be done using the following CLI command:

  "radius-server timeout 10". You may need to increase it even more depending on how long the wait time is on your ODBC database.

  There is an enhancement request in to have the GBA behavior has changed, you can see here (http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCeb21974&Submit=Search). Because he considered a request for improvement, don't hold your breath waiting for that, playing with delays so that you don't get hit by it again.