How to assign the value to a dynamically created flash variable.

Similar Questions

• How to assign the value to the application-level element

  Hello

  I'm learning to APEX.  I use version 4.2.6.

  My question is, I set a text field called 'FINANCIAL_YEAR' in the login page.  I wanted to know how to assign this value to a text element of Application level (on page sent), so that I can get this value through at my request.

  Thank you

  -Anand

  anand_gp wrote:

  Yes, I created a 'text area' under 'HTML' in the 'Home' page  Who accepts the exercise of a table through LOV.  I intend to assign this value to a global variable so that this variable can be read in any of the application to filter the result set from different tables (not yet built the rest of the application).  To do this, I was intending to use "Shared components"-> "Elements of Application".  I'm still not quite sure how it works.

  Start by reading the documentation on elements of application.

  Go to the shared components > Application parts and create your G_FINANCIAL_YEAR item. Value Session State Protection Restricted - can not be set the browser so that the value is not editable by the user, falsification of URLS or scripts.

  On the home page, if there is not already a button to submit the value of the fiscal year, add one in the HTML area, with the Action as a submit Pageclick. Otherwise, you can do without the button and using submit Page in Page Action when the changed value select the parameter in the list so he can undergo.

  Then, in the section of the Page processing, create a calculation:

  Point Type: Application-level element

  Calculate Item: Application: G_FINANCIAL_YEAR

  Point calculation: After submit

  Type of calculation: Value of the element

  Calculation:

  Run the application, select a value in the list of the fiscal year and submit the page. Review of current session state in the viewer of session state by clicking on the link of Session in the toolbar developer. Select the Elements of Application in the view list, and then click set. The element of your application and its current value must be visible. You can now reference value throughout your application by using the appropriate syntax.

  You should also consider if a default value (for example the current year) using a calculation Application from the point of calculation on the new Instance and coordinate the application point and part of the homepage using point application as the Source of value or an expression with Source page element, the value always, replacement of value that exists in the session state.

• How to assign the value to the particular text box field

  Hi all
  
  My requirement is to call the Web service with the participation of the ADF page.
  
  The steps I did:
  
  1. I created a data control to the WSDL-based Web service.
  
  2. simply drag and drop the process, it is automatically created the form with the fields of entry, press the Process button
  
  3. when I entered the values and then process button, it'il pass web service values corretly.the is called with the values entered correctly.
  
  4 but when I try to assign the value of some other material that does not work.
  
  I am assigning value to the value field navigate to the properties of the particular field = "CRΘER."
  
  When I like what the value is displayed on the screen. But it will not pass the value to the web service.
  
  I think that the value is only the display on the screen. Stored not at the level of links. Kindly guide me in this.
  
  Thanks in advance
  C.Karukkuvel

  Hello

  Just the previous value placed on the next to put that into the first field level JSpx
  

  If not put a valueChangeListener and EL Expression to set the value

  Kind regards
  Suganth.G

• How to assign the value to the text field dynamically

  Hello

  I created a form that accepts input from the front desk.  As soon as I select ACCOUNT_CODE using LOV, I would like to define a DISPLAY only field INSTALMENT_AMOUNT with values that is available in another table based on the value of the ACCOUNT_CODE field.

  I already have the query to retrieve the details.  However, I wanted to know how to proceed.

  I created 'point page' INSTALMENT_AMOUNT in the form.  On this point in relation to a created "computation".  But the value is been showed that when I open an existing record for editing.  Not during new save when I try to create.  I would like to fill the value, when I create a new record and after selection of the ACCOUNT_CODE value.

  

  Thank you

  -Anand

  anand_gp wrote:

  I created a form that accepts input from the front desk.  As soon as I select the ACCOUNT_CODE using LOV, I would like to define a DISPLAY only field INSTALMENT_AMOUNT with values that is available in another table based on the value of the ACCOUNT_CODE field.

  I already have the query to retrieve the details.  However, I wanted to know how to proceed.

  I created 'point page' INSTALMENT_AMOUNT in the form.  On this point in relation to a created "computation".  But the value is been showed that when I open an existing record for editing.  Not during new save when I try to create.  I would like to fill the value, when I create a new record and after selection of the ACCOUNT_CODE value.

  

  Events in response to actions of the user in the browser at run time are implemented using dynamic measurements.

  In this case, use a dynamic action change in the P270_ACCOUNT_CODE article, with action set the value by specifying P270_ACCOUNT_CODE in the elements of the Page to send and your source of SQL as the SQL statement.

• How to assign the value based on the various buttons

  Hello
  I'm working on create/update page to date, who have two buttons, save and send. The two buttons save registration but two fields in OT be assigned values when you press "submit" button. If I set EOImpl (< nom_de_colonne >), how I'd get that affects? Or any other convenient way to implement?
  All information and any suggestions will be appreciated in advance.
  Thank you.
  Rudolph

  Hi, had
  Thanks for the quick response. I do not work on the courses page. It's all simple page to update. My drawing a 2 button, save and send. Both registers the update. Then click on the "Submit" button, I neet automaticall value for 2 columns, present the flag = O, application number = 'SSR - 1' before you save it, and the value must be stored in the DB table.
  Thank you.
  Rudolph

• How I set the value of a dynamic text field row

  I have a repeated line form that contains a button and several text fields.  There is a text field (input field) above with some information I want to place in the table and several buttons that I want to read the value of and defined on the table.  Excuse me there are several questions I have and I use pseudocode to describe.

  Top shape resembles

  InputField

  | ButtonX1 | ButtonY1 | DescriptionX1 (read the text only field)

  ...

  | ButtonXn | ButtonY1 | DescriptionXn

  OutputRow looks like

  | ButtonOutput | OutputField1 | OutputField2 | OutputField3 |

  So, I want to do

  ButtonX1.click

  {

  OutputTable.OutputRow.addInstance (true) //this works - everything I have questions on

  OutputTable.OutputRow.OutputField1.rawValue = DescriptionX1.rawValue

  /*

  Question 1

  How should I address the location of each table to set a value

  Question 2

  How can I get the value of the description field in the same row as button and table

  I would like to say something to the effect of the OutputTable.OutputRow [?]. OutputField1.rawValue = this.parent.DescriptionX

  */

  OutputTable.OutputRow.OutputField2 = InputField.rawValue

  /*

  Same question as above - how can I specify a dynamic line - it's the syntax appropriate for obtaining the value of the input field?

  */

  OutputTable.OutputRow.OutputField3 is this. ButtonLabel

  /*

  Question 3

  How can I get the value of the label of the button to set the field

  There should be a lot of these buttons and buttons will be added - I'd rather set the value based on the label of the button to facilitate value - not requiring only not to change the code

  */

  Issue 4--unrelated to those at the top.

  Is it possible to build the first table

  | ButtonX | ButtonY | Description |

  from a XML file.  I've seen examples showing how to build if it's just data, but XML can be pushed into a form with the code to perform the above actions?

  Glad you figured it out... nothing wrong with doing it this way.

  Normally XML contains data and no default legends these xml files are bouond to the rawValue property. You can enable the dynamic linking and other properties of the object will be bindable (they appear as links) in the user interface. If you click on the link to legend an Assistant appears allowing you to bind the node in the XML file.

  Paul

• How to assign the value "ID or content dDocName" (property of the University Complutense of MADRID) Webcenter capture.

  Hello

  Could you please help me for the script for extracting Webcenter UCMS property in Webcenter Capture. I also have a requirement where I need to assign a value to the UCM property ' dDocName or content ID "of the capture of webcenter.

  Someone please help me with above scenarios.

  Hello

  Thanks for the reply. My requirement is, when check-in file to the AAU, it generates values to the property "docId" for the file that is unique. I need the value of the docId during validation webcenter capture processor. I solved this problem.

  I created a filter in the AAU for archiving profile. This filter is triggered whenever the Service factor of the AAU invoke. In this filter, I can get the value of "docID".

  Thank you.

• How to assign the value to the variable of project in the Jython script

  Hello
  
  I want to assign a value to the variable of project in the jython script.
  I tried to assign the following, but it is throwing some errors.
  
  < @.
  int noOfRecords = 10;
  #var1 = noOfRecords;
  @ >
  
  
  Can you please help me in this regard.
  
  Concerning
  Shyam

  Perfect! Good to know that!

  Please, don't forget to close the thread and assign the status to 'correct' or 'comfortable' to each response that helped you!

  Thank you

  Cezar Santos
  http://odiexeperts.com

• How to assign the value of a variable to a quiz?

  Hi, I have a problem, I attempted to set the value of a variable for the quiz on the final value of the project, any suggestions?

  Sorry but I do not understand your question at all. If you talk about a quiz like cpQuizInfoPointsscored or cpInfoPercentage system variable, this is all simply impossible because the system variables are read-only.

• How to pass the value of a column to a variable to be used in another analysis

  Hello

  I'm on OBIEE 11.1.1.7.1.

  I have the following problem.

  I have DISCOVERED called analysis. It has just a column with the result. Simple. Assume that the answer is 2500

  I have another scan which has two other columns, namely GOLD and LOANS. I want to calculate the total DISCOVERED + GOLD + READY.

  That's why I need to pass the value of 2500 of the first analysis of the second analysis via a variable.

  I can not add all three of them in the same analysis there are various filters for OVERDRAFT, and the application of these filters on the GOLD and LOANS gives the desired result. I tried to add filters in the column of the overdraft, but that doesn't seem to work.

  Any help will be greatly appreciated.

  I'll give you an example. I hope that you will mark for my time...

  Hope that you will be aware of how to combine a similar request.

  in the first criterion you have

  Goldprice Loanamount year 0

  Second criterion

  Year 0 0 Overdraftamount

  the two maintain the necessary filters.

  Add a column of result (option you can see in the topic area pane) that add all three columns. You can choose the columns. formula will come something like below

  saw_1 + saw_2 + saw_3

  Thank you

  AJ

• AS3: How to get the size of a dynamically created text field

  I'm importing text from an XML file and lines of text to display in the text separated under the other fields. How can I set the value y of each text field following so that there is little space (40 pixels or more) in the field above, regardless of the length of the text? Here is my current code. Any help would be greatly appreciated.

  var textArray:Array = new Array();
  for (var i: int; i < myXML.TOPIC [0].) QUERY.length (); i++) {
  var textField:TextField = new TextField();
  textField.htmlText = myXML.TOPIC [0]. QUERY [i]. QUESTION;
  textField.x = 100;
  Here's my problem... I want the value of is based on the height of all the previous text fields that have been created

  textField.y is 100 + (40 * i);.
  textField.border = true;
  textField.width = 800;
  textField.textColor = 0 x 000000;
  textField.multiline = true;
  textField.wordWrap = true;
  textField.selectable = false;
  addChild (textField);
  textArray.push (textField);
  }

  Separate the variable of the loop that you update in the loop to keep track of the current value of y.  The current value of there would be updated to the previous value, the height of the textfield newest once it was filled with text.

• How to reorganize the field that was dynamically created by the controller

  Hello
  
  We have created a field (of 'Style' = > 'MessageChoice') in the page using the declaratively controller and also where we dynamically attach a View object to the field based on certain conditions.
  
  The hard part, that we are facing here is that we couldn't a replenishment of the field through customization because the field is created via controller because we don't see not any which column.
  
  Can someone help me please how to reorganize the field by the controller or any other way to do this?
  
  
  Your suggestions are very appreciated.
  
  
  With our thanks,
  Trehout

  Depreciated, the method will not be supported or will be obsolete in the future provided.
  don't worry about the depreciation methods. His will not touch you in the near future...
  Because the whole ofa technology is amortized now... ;)

  Yes, if the item is part of a specific region use as a handle.

  Prasanna-

• How to get the value of a dynamic checkbox?

  Hello
  
  I created a report with the following region.
  

  SELECT 
       apex_item.checkbox(1,employee_id) " ",
       employee_name,
       status
  FROM employee 
  WHERE parent_id IN (
          SELECT employee_id FROM employee WHERE username=lower(:APP_USER))

  I have a button that include the selected employees. I wrote the following code, but when I pressed the button it gives the error "the requested page is not found.".
  
  

      BEGIN
      FOR i in 1..APEX_APPLICATION.G_F01.COUNT LOOP
         UPDATE employee
         SET selected = 'Y'
         WHERE employee_id = to_number(APEX_APPLICATION.G_F01(i));
      END LOOP;
     COMMIT;
     END;

  The problem with the code above, because when I write another process to this button, it works. Thanks for the replies.

  Hello

  Problem was that column type is "simple check box", even, you have used APEX_ITEM to generate.
  Column type must be "standard report column.

  Now the page gives no error "the requested page is not found." When you submit the page, and a checkbox is checked.
  In apex.oracle.com process crashes now table emp having no column TICKED.

  Kind regards
  Jari

• How to assign a value of the element from page to main page in the column element when Cre

  I have a form build on table T1. The T1 has a primary key defined (T1PK) and four other columns (C1 - C4). I have a form in this table. This form accepts the values of C1 to C4 and displayis an extra point, is not based on columns of T1 - P1_DUMMY. The form for T1PK element has the value "hidden and protected.
  When creating the form, I wanted that the value of the primary key (T1PK) will be obtained through existing trigger. I want to use the value stored in the page called "P1_DUMMY" for P1_T1PK.
  
  No matter what I do, I always get this error when I hit the button 'CREATE' on the page of the form:
  
  ORA-01400: cannot insert NULL into ('DEV'. "" T1 ". ("' T1PK")
  
  The Create button is a condition not to show if the the P1_T1PK page element is NULL. I created page rendering process, the process of transformation of page like this bock of PL/SQL:
  
  : P1_T1PK: =: P1_DUMMY
  
  But I still get ORA-01400. The form has the P1_DUMMY as display only, not not to store the State, so I can see that the P1_DUMMY element has the value I want (2).
  
  How to assign the value stored in P1_DUMMY in P1_T1PK when I click on the button CREATE on this form?
  
  Thank you for your time.
  
  Daniel

  Hello
  The belief question is the way in which the calculation is being defined. You are not using the &. rating (dot ampersand) in PL/SQL and SQL.

  Try this.

  1 define the calculation on P1_T1PK of Type calculation of value of the element
  2. on the next page to load textarea, enter P1_DUMMY. No. colon or &
  3. give appropriate conditions

  Kind regards

• How to assign the next value in the sequence directly in a variable?

  How to assign the next value in the sequence directly in a variable without using a table TWICE in PL/SQL.

  BluShadow wrote:

  How about a quick test on 11g, just to see if you directly select a sequence in a variable is significantly better than the mark of DOUBLE.

  ...

  Nope... no obvious difference.

  This is because there is none: Oracle's SELECT sequence. NEXTVAL FROM DUAL under the covers. The direct assignment is just a convenient encoding for us, but it does not change the work that accomplishes Oracle.

  create sequence s;
  alter system flush shared_pool;
  declare
  l_num number;
  begin
  l_num := s.nextval;
  end;
  /
  select sql_text from v$sql where parsing_schema_name = user;
  

  SQL_TEXT
  Report the number of l_num; begin l_num: = s.nextval; end;
  Select sql_text from v$ sql where parsing_schema_name = user
  Select double S.NEXTVAL