Access problem router network

Similar Questions

• Loss of connection with my router, shows only limited access and my network showed that unidentified

  Original title: unidentified network, missing the default gateway

  Hello

  So one day out of the blue I lost connection with my router. I was able to reconnect but this time around I had only limited access and my network showed non-identified. I tried to connect to a different wireless network, same thing. When I run ipconfig, I'm missing a value for the default gateway.

  I tried to:

  -Reinstall the drivers for the adapter

  -update the drivers

  -Reset my router

  -Gateway ipv4 manually of entry

  -kill lan via Device Manager drivers

  -scream at the computer

  I have a Setup to dual boot with Linux Mint along side Windows 7. When I boot in Linux it connects to any network without problem.

  Some help would be appreciated.

  Plug

  Windows 7 Ultlimate

  I7-4700MQ @2.4

  GTX 765M 2 GB

  8 GB RAM

  1 TB + 240SSD

  Realtek RTL8188CE wireless

  Hello Alex,.

  Thank you for your response.

  I appreciate your time.

  I suggest you to uninstall the network driver wireless and reinstall in compatibility mode.

  To uninstall the driver, follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  b. Click to expand network adapters, right-click on the map and click Uninstall.

  c. restart the computer.

  Now you can Download driver from this link wireless.
  Reference:
  http://downloads.Eurocom.com/support/drivers/zip/238/238_RealtekWLAN_W764.zip

  For reference:
  EC http://www.Eurocom.com/EC/drivers (238)

  To reinstall the driver in compatibility mode, follow these steps:

  a. right click the driver file, and then click Properties.

  b. click on the compatibility tab.

  c. click on check "run this program in compatibility mode for" and select Windows XP(Service pack 3).

  d. click apply and ok.

  Now, install the driver.

  Please keep us updated.

  Thank you

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Restrict access to the network on 871 router via mac address

  Hello

  I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

  I can either have static IP or DHCP for local machines.

  Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

  I use these...

  static Mac address table

  OR

  Security table of Mac addresses

  ... to achieve this?

  Thank you.

  You can use "mac-address-table static" If you know all the mac addresses that will be connected.

  If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

  Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

  Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

  I hope it helps.

  PK

• In the VPN 3000 concentrators network access problem

  Hello

  I created a group user ID, allowing simultaneously 3 session of this particular ID, when I am session VPN initating this particular ID, I can connect to a single session with any problem, and I can access the internal network. simulatneously trying another session from another machine using the same user ID, I get the ip address of the VPN server's internal network, but I can't ping internal LAN server and perform operations .only I get the IP address. But I'm nt problem in first session created, they problem arrive for the second session

  Are the next two sessions of the clients that are behind a NAT/firewall device? Try to create a second group ID and log in to the second client and the second. If you still have the problem is not a problem of "simultaneous session."

  If you see the problem either, and your customers are both behind the same NAT device, have your clients connect from different locations or enable NAT traversal.

• I can't access my windows store error we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. »

  Original title: I need help please.

  I cannot access my store of windows and can't update all the windows applications not to mention that movie maker and photo gallery witch don't need to be updated. And because I can't access windows store I can't windows 8.1 update for my laptop. When I click on the app store window at startup it loads for a while and what he said to me, 'we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I check my internet and went into my settings to find something wrong with my connection, but I found nothing. So I did a few virus scans and found some malware on my computer. Then I took all the malware from my computer and still could not get windows store to open. I tried to download the updates to my computer and it wouldn't let me. How can I get my store windows to work and get my computer up to date? Help, please.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Read the link above and run the Troubleshooter "App."

• Extremely slow WRT54G navigation pages @ 192.168.1.1 - this could be a problem with network card?

  Friend of mine is having the problems of Internet connection on his main PC which is hard wired to the router, it is using Comcast cable (18Mbit) and all of a sudden today the speed fell to dialup speeds, literally, however its ONLY this main with the issue of speed pc, there are 2 other computers connected wirelessly to the router, and they run at full speed during the test on speedtest.net

  Solve the problem, I tried bypassing the router and still have the issue of speed, so I can pretty much rule out the router, but as part of my troubleshooting whenever I try to access the router configuration pages via 192.168.1.1 but it is VERY slow to respond.

  For example when hitting enter after typing 192.168.1.1 it takes about 45 seconds to view the router configuration page, and then clicking on any other tabs takes 30-45 seconds longer to respond.

  So my main question with this post, is it possible that its network card went bad? What would cause really slow access to the configuration of the router?

  The PC is under Win 7 Ultimate 32 bit and Ive tried to run the network troubleshooter, uninstalled the network card in Device Manager / reinstalled the drivers but nothing seems to work.

  I also ran Malware Bytes and the analytical results were clean.

  Any ideas appreciated!

  can you 'borrow' a card? This is the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronic stores is a good source, if it solves your problem you keep the card, otherwise there is the option to return

• Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

  SYSTEM & HARDWARE INFO:
   
  Wireless adapter: USB54GC v3
  Router: Netgear WNR834B (with latest firmware)
  Router config: Auto Channel, up to 130mbps mode, radio enabled, enabled SSID broadcast
  Router Config2: Frag Ahmed - 2346, beat the CTS/RTS - 234, long preamble, MTU - 1500
  Wireless security: WPA - PSK + WPA2 - PSK
  Internet: ISP Modem, Auto-IP, DNS Auto, no connection cable

  Operating system: Windows XP Pro SP3 (latest updates as of 17/01/2010)
  Drivers: Latest from Linksys site (v4.9.90 setup.exe download)
  Programs of security software: Comodo & Panda Cloud Antivirus Firewall
  Configs of security software: uninstalled, installed or disabled, and installed/enabled

  DETAILS OF THE PROBLEMS:

  No wireless network is detected on the computer with the installed adapter WUSB54GC.  Cell phones, printer (located in the same office) and game console, receive positive signals / have no connectivity problem.  With a new installation of Windows (i.e. the BONES cost installation before using each method) I tried to install the unit using the following methods: 1) using the Setup program on the CD-ROM included, 2) using the last program (drivers) site Web of Linksys, install 3) manually through the device with drivers from the Disk Manager and installing 4) manually through the Device Manager with the newer drivers from the Web site Linksys.  In addition, I tried with the firewall disabled/uninstalled software.

  I had some success using the Linksys Wireless Manager program that is included in the installation program.  However, it is only if I choose the option 'connect to the hidden network' when the Wireless Manager is ran in the last step of the Installer (no network is detected the case).  The quirks are that the network is not hidden, and after Setup is complete, I can see all the wireless LANs with the Linksys Wireless Manager (no need to check the option hidden network).  After a few diagnostic tests, I think that the Network Magic software that is installed in quiet mode with the Linksys software is at the origin of the problem.

  During the detailed above method that allowed me to connect to the network, I used the firewall software to observe that connectivity can be established only if nmsrvc.exe, a component of the network Network Magic/pure software platform that is installed silently, is allowed access to the network.  After this program to access the Linksys Wireless Manager network can detect networks normally and connectivity problems disappeared.  After he logged initially I can even kill the process, its assistance process and the program manager wireless, still maintain connectivity.  I also thought about this magic (AKA pure networks platform service) network installation two other network protocols that when disabled preventing connectivity.  With certainty the adapter only works if I finish the complete installation program by using the hidden network option and continue to use linksys wireless/network magic software later.

  I'm trying to understand why the Network Magic software is necessary to detect and use all networks.  As I said originally, I tried just to install the drivers through the device without success Manager.  The adapter is configured on a machine Pentium 4 of 2001, and this software supports 40 MB of precious CPU cycles and memory.  I want to connect to my wireless network and use the computer without software bloated slow down the computer even more.  My own conclusion, after all these tests are that my router needs the network magic to work properly for some reason, but if that's true, I would at least use Windows connects to the network as Linksys Wireless Manager uses 30MB RAM itself.  Of course, it's more a problem advanced if I appreciate anyone who takes the time to read all this and make their contribution.  Thank you.

  I think that the most appropriate statement would be that the WUSB54GC has some compatibility issues with Windows XP SP3.

  Specifying the age of the available Linksys drivers I did some research and discovered that the WUSB54GCv3 uses a third party (a common practice), the Ralink RT2800UD chipset.  Latest Ralink drivers for this chipset are over a year newer than the official drivers from Linksys.  They require just a few reconfiguration so that they work with Linksys WUSB54GCv3.  With the updated drivers comes better compatibility and performance often.

  Once I installed these drivers updated the device could detect local wireless normally, and I was able to use the Zero Windows wireless utility to connect to my network.  I think that others with similar compatibility problems will have the same result.  For more information and links to these pilots updated already visit reconfigured: http://sites.google.com/site/linksysupdateddrivers/.  There are not official, updated drivers for many other Linksys products here.  Credit for the drivers and the Web site goes to this person: http://sites.google.com/site/linksysupdateddrivers/about.

• Cannot access my router through the Explorer configuration page

  I need to do a port forwarding on my router. My internet connection works (even if she falls occasionally) and I can also connect to other computers on my network. However, I cannot access my router through IE page (I get a message saying: page not found). When I go see the map in the options Vista network, the router is not displayed and when I clikc on "See the whole map", I get a message saying that Windows cannot detect any computer or devices.

  My connection to the router is connected, and it is a WRT54G Lyinksys. Any ideas how I can see my router or go to its page layout? Another thing, I went to CMD and the ping command returns a default gateway 192.168.1.1, which is what I have my using the address of the webb page.

  Thanks for any help.

  Hi JBHPUser,
  
  (a) other router configuration page, you are able to access other Web sites?
   
  (b) what operating system and Internet Explorer version do you use?
   
  This article can be very useful.
   
  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
  http://support.Microsoft.com/kb/956196
   
  You can also access these links, which is primarily for Windows Vista, but are also applies to Windows 7
   
  
  Solve problems with computers not appearing is not in the network map
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map
   
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
   
  
  Aziz Nadeem - Microsoft Support

• LATITUDE DE820 wiped out loaded XP drivers DELL & SW, no access to the network

  Everyone out there - I need HELP... I bought a second hand LATITUDE DE820 with Windows 7 above and it worked fine (also WIFI). I need to load XP Prof on it (Yes...) and therefore all DELL SW disappeared (had no CD DELL) that I loaded package XP 3 Service that I plugged in Ethernet, but I also have a WLAN - but NO communication to all NETWORKS. Ping an IP address any LAN brings 'Host unreachable' IPConfig/all shows: IP of Windows host Setup...: laptop Prim. DNS: Enter Mode: Broadcast IP routing enabled: No. WINS Proxy enabled: Ethernet adapter without Bluetooth network connection: media state: media disconnected Description: peripheral physical addr Bluetooth (Personal Area Network): Mac addr. Control Panel-> network connections displays LAN at the Connecticut 1394 network adapter (properties: peripheral works properly, driver: MS 07/01/2001!) Connection status: connected but 0 packet protocols: f. Client Microsoft NW File & Printer sharing TCP - IP - trying to hit the repair-> msg "TCP/IP not enabled for this connection") Conclusion: I think that my XP drivers are too old, or not DELL problem: I have no access to the network - minimum need drivers update for access to Internet, and then upgrade to download that/those pilot on a Non-Dell PC then CD, then install on the laptop don't know DELL HW, used Service tag to find 11 drivers, drivers resp. 75 for that I think it's a driver of 'network' - but don't know what or any other suggestion? Thks for any help Peter

  Well well maybe it was because I realized that I needed to insert HTML
  to get my text with line breaks.
  But in any case the problem is solved by support group European German DELL who responded very quickly by there DELL Forum and help me great to go again. Thank you DELL-Dave S.
  Problem solved by:
  followind drivers downloaded from the CD, and then installed on D820
  WLAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=R257701&OSCODE=WW1&FILEID=2731111614&LANGUAGECODE=DE&CATEGORYID=NI.
  LAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=04VK6&OSCODE=WW1&FILEID=2731090506&LANGUAGECODE=DE&CATEGORYID=NI.
  Now using Ethernet and wireless network worked with access to the network, all the others downloaded drivers from the net.
  Viva

• Cisco ASA 5505 VPN L2TP cannot access the internal network

  Hello

  I'm trying to configure Cisco VPN L2TP to my office. After a successful login, I can't access the internal network.

  Can you jhelp me to find the problem?

  I have Cisco ASA:

  within the network - 192.168.1.0

  VPN - 192.168.168.0 network

  I have the router to 192.168.1.2 and I cannot ping or access this router.

  Here is my config:

  ASA Version 8.4 (3)

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 198.X.X.A 255.255.255.248

  !

  passive FTP mode

  permit same-security-traffic intra-interface

  the net-all purpose network

  subnet 0.0.0.0 0.0.0.0

  network vpn_local object

  192.168.168.0 subnet 255.255.255.0

  network inside_nw object

  subnet 192.168.1.0 255.255.255.0

  outside_access_in list extended access permit icmp any any echo response

  outside_access_in list extended access deny ip any any newspaper

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sales_addresses 192.168.168.1 - 192.168.168.254

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT dynamic interface of net-all source (indoor, outdoor)

  NAT (inside, outside) source inside_nw destination inside_nw static static vpn_local vpn_local

  NAT (exterior, Interior) source vpn_local destination vpn_local static static inside_nw inside_nw-route search

  !

  network vpn_local object

  dynamic NAT interface (outdoors, outdoor)

  network inside_nw object

  NAT dynamic interface (indoor, outdoor)

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 198.X.X.B 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  AAA authentication enable LOCAL console

  the ssh LOCAL console AAA authentication

  AAA authentication http LOCAL console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  IKEv1 crypto ipsec transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac

  transport in transform-set my-transform-set-ikev1 ikev1 crypto ipsec mode

  Crypto-map Dynamics dyno 10 set transform-set my-transformation-set-ikev1 ikev1

  card crypto 20-isakmp ipsec vpn Dynamics dyno

  vpn outside crypto map interface

  Crypto isakmp nat-traversal 3600

  Crypto ikev1 allow outside

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 30

  Console timeout 0

  management-access inside

  dhcpd address 192.168.1.5 - 192.168.1.132 inside

  dhcpd dns 75.75.75.75 76.76.76.76 interface inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal sales_policy group policy

  attributes of the strategy of group sales_policy

  Server DNS 75.75.75.75 value 76.76.76.76

  Protocol-tunnel-VPN l2tp ipsec

  user name-

  user name-

  attributes global-tunnel-group DefaultRAGroup

  address sales_addresses pool

  Group Policy - by default-sales_policy

  IPSec-attributes tunnel-group DefaultRAGroup

  IKEv1 pre-shared-key *.

  tunnel-group DefaultRAGroup ppp-attributes

  ms-chap-v2 authentication

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13

  : end

  Thanks for your help.

  You must test with 'real' traffic on 192.168.1.2 and if you use ping, you must add icmp-inspection:

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  --

  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• AnyConnect to ASA 5505 ver 8.4 unable to ping/access within the network

  My AnyConnect VPN to connect to the ASA, but I can not access my home network hosts (tried Split Tunnel and it didn't work either). I intend to use a Split Tunnel configuration, but I thought I would get this job until I've set up this configuration. My inside hosts are on a 10.0.1.0/24 network and networks 10.1.0.0/16. My AnyConnect hosts use 192.168.60.0/24 addresses.

  I saw the messages of others who seem similar, but none of these solutions have worked for me.  I also tried several configurations NAT and ACLs to allow my internal network to the ANYConnect hosts and return traffic shaping, but apparently I did it incorrectly.  I undestand what this worm 8.4 is supposed to be easier to achieve, NAT and others, but I now have in the IOS router it is much simpler.

  My setup is included below.

  Thanks in advance for your help.

  Jerry

  *************************************************************

  ASA Version 8.4 (4)

  !

  hostname mxfw

  domain moxiefl.com

  activate the (deleted) password

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  Shutdown

  !

  interface Ethernet0/4

  Shutdown

  !

  interface Ethernet0/5

  switchport trunk allowed vlan 20.22

  switchport mode trunk

  !

  interface Ethernet0/6

  Shutdown

  !

  interface Ethernet0/7

  Shutdown

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.0.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  interface Vlan20

  nameif dmz

  security-level 50

  IP 172.26.20.1 255.255.255.0

  !

  interface Vlan22

  nameif dmz2

  security-level 50

  IP 172.26.22.1 255.255.255.0

  !

  passive FTP mode

  DNS lookup field inside

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  name-server 208.67.222.222

  Server name 208.67.220.220

  domain moxiefl.com

  permit same-security-traffic inter-interface

  network of the Generic_All_Network object

  subnet 0.0.0.0 0.0.0.0

  network of the INSIDE_Hosts object

  10.1.0.0 subnet 255.255.0.0

  network of the AnyConnect_Hosts object

  192.168.60.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.60.0_26 object

  255.255.255.192 subnet 192.168.60.0

  network of the DMZ_Network object

  172.26.20.0 subnet 255.255.255.0

  network of the DMZ2_Network object

  172.26.22.0 subnet 255.255.255.0

  pager lines 24

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 dmz

  dmz2 MTU 1500

  local pool VPN_POOL 192.168.60.20 - 192.168.60.40 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT dynamic interface of Generic_All_Network source (indoor, outdoor)

  NAT (inside, outside) static source INSIDE_Hosts INSIDE_Hosts static destination AnyConnect_Hosts AnyConnect_Hosts-route search

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.60.0_26 NETWORK_OBJ_192.168.60.0_26 non-proxy-arp-search to itinerary

  NAT (dmz, outside) dynamic interface of Generic_All_Network source

  NAT (dmz2, outside) dynamic interface of Generic_All_Network source

  Route inside 10.1.0.0 255.255.0.0 10.0.1.2 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  AAA authentication http LOCAL console

  Enable http server

  http 10.0.0.0 255.0.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec ikev2 AES256 ipsec-proposal

  Protocol esp encryption aes-256

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES192

  Protocol esp encryption aes-192

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES

  Esp aes encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 proposal ipsec 3DES

  Esp 3des encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal OF

  encryption protocol esp

  Esp integrity sha - 1, md5 Protocol

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  registration auto

  domain name full anyconnect.moxiefl.com

  name of the object CN = AnyConnect.moxiefl.com

  Keypairs AnyConnect

  Proxy-loc-transmitter

  Configure CRL

  string encryption ca ASDM_TrustPoint0 certificates

  certificate 439 has 4452

  3082026c 308201d 5 a0030201 9a 445230 02020443 0d06092a 864886f7 0d 010105

  05003048 06035504 03131641 6e79436f 6e6e6563 742e6d6f 78696566 311f301d

  6c2e636f 312530 2306092a 864886f7 0d 010902 1616616e 79636f6e 6e656374 6 d

  2e6d6f78 6965666c 2e636f6d 31333039 32373037 32353331 5a170d32 301e170d

  33303932 35303732 3533315a 3048311f 301D 0603 55040313 16416e79 436f6e6e

  6563742e 6d6f7869 65666c2e 636f6d31 86f70d01 09021616 25302306 092a 8648

  616e7963 6f6e6e65 63742e6d 6f786965 666c2e63 6f6d3081 9f300d06 092 has 8648

  86f70d01 01010500 03818d 00 30818902 8181009a d9f320ff e93d4fdd cb707a4c

  b4664c47 6d2cc639 4dc45fed bfbc2150 7109fd81 5d6a5252 3d40dc43 696360d 5

  fbf92bcc 477d19b8 5301085c daf40de5 87d7e4aa f81b8d7f 8d364dfa 0a6f07d7

  6a7c3e9b 56e69152 aa5492d8 e35537bd 567ccf29 7afbeae8 13da9936 9f890d76

  1d56d11d da3d039a 0e714849 e6841ff2 a3633061 03010001 300f0603 b 5483, 102

  1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 86301f06 04030201 551d

  23 04183016 80142f27 7096c4c5 e396e691 e07ef737 af61b71f 64f1301d 03551d

  0603551d 0e041604 142f2770 96c4c5e3 96e691e0 7ef737af 61b71f64 f1300d06

  092a 8648 86f70d01 01050500 03818100 8f777196 bbe6a5e4 8af9eb9a 514a 8348

  5e62d6cd e430a758 47257243 2b 367543 065d4ceb 582bf666 08ff7be1 f89287a2

  ac527824 b11c2048 7fd2b50d 6aa00675 e4df7859 f3590596 b1d52426 ca 35, 3902

  226 dec 09 713f7ba9 80bdf7bb b52a7da2 4a68b91b 455cabba 4e77f4b0 1e97a52c

  0cc4c6f3 f244f7d9 0a6e32fb 31ce7e35

  quit smoking

  IKEv2 crypto policy 1

  aes-256 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 10

  aes-192 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 20

  aes encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 30

  3des encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 40

  the Encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  Crypto ikev2 activate out of service the customer port 443

  Crypto ikev2 access remote trustpoint ASDM_TrustPoint0

  Telnet timeout 5

  SSH 10.0.0.0 255.0.0.0 inside

  SSH timeout 5

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  dhcpd dns 208.67.222.222 208.67.220.220

  dhcpd outside auto_config

  !

  dhcpd addresses 10.0.1.20 - 10.0.1.40 inside

  dhcpd dns 208.67.222.222 208.67.220.220 interface inside

  dhcpd allow inside

  !

  dhcpd address dmz 172.26.20.21 - 172.26.20.60

  dhcpd dns 208.67.222.222 208.67.220.220 dmz interface

  dhcpd enable dmz

  !

  dhcpd address 172.26.22.21 - dmz2 172.26.22.200

  dhcpd dns 208.67.222.222 208.67.220.220 dmz2 interface

  dmz2 enable dhcpd

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint0 point

  WebVPN

  allow outside

  AnyConnect essentials

  AnyConnect image disk0:/anyconnect-win-3.0.2052-k9.pkg 1

  AnyConnect profiles AnyConnect_client_profile disk0: / AnyConnect_client_profile.xml

  AnyConnect enable

  tunnel-group-list activate

  internal GroupPolicy_AnyConnect group strategy

  attributes of Group Policy GroupPolicy_AnyConnect

  WINS server no

  value of server DNS 208.67.222.222 208.67.220.220

  client ssl-VPN-tunnel-Protocol ikev2

  moxiefl.com value by default-field

  WebVPN

  AnyConnect value AnyConnect_client_profile type user profiles

  password username user1 $ $ encrypted privilege 15

  password username user2 $ $ encrypted privilege 15

  tunnel-group AnyConnect type remote access

  tunnel-group AnyConnect General attributes

  address VPN_POOL pool

  Group Policy - by default-GroupPolicy_AnyConnect

  tunnel-group AnyConnect webvpn-attributes

  enable AnyConnect group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  Review the ip options

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  inspect the icmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:f2c7362097b71bcada023c6bbfc45121

  : end

  Hello

  You may have problems with the NAT configurations

  Look at these 2 high page configurations

  NAT dynamic interface of Generic_All_Network source (indoor, outdoor)

  NAT (inside, outside) static source INSIDE_Hosts INSIDE_Hosts static destination AnyConnect_Hosts AnyConnect_Hosts-route search

  The solution is either to reconfigure the dynamic PAT with the lowest priority (goes tearing down the current normal outbound connections) OR reposition the exempt NAT / configurations NAT0

  Dynamic change of PAT could be done with

  no nat dynamic interface of Generic_All_Network source (indoor, outdoor)

  NAT automatic interface after (indoor, outdoor) dynamic source Generic_All_Network

  NAT0 configuration change could be done with

  no nat source (indoor, outdoor) public static INSIDE_Hosts static destination INSIDE_Hosts AnyConnect_Hosts AnyConnect_Hosts-route search

  NAT (inside, outside) 1 static source INSIDE_Hosts INSIDE_Hosts static destination AnyConnect_Hosts AnyConnect_Hosts-route search

  Changing the order of the NAT0 configurations as described above is probably the simplest solution and does not cause a teardown of connections for users. Of course change the dynamic configuration PAT would avoid future problems if it can generate. For example, it could overide static PAT (Port Forward) configured with Auto NAT configurations.

  Try option suites you best and let know us if it solved the problem

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary

  -Jouni

• Easy VPN not able to access the local network

  Hi guys,.

  little hope can help me, I'll give you a run down on the config.

  I have a border router that is a no. 2851 connected to the No. 2851 is a switch cisco 3750 running Routing inter - vlan with four VLANS.

  I have easy VPN server on the edge router No. 2851 I am able to connect remotely from a client vpn cisco with a problem but I can't access the local network on the server, I tried everything with no luck.

  I have a cisco VPN client installed on a 64-bit windows system 7 and I also tried with windows xp 32-bit system and still no luck.

  Please I need help I need to get this race to end of trading today.

  I will be copying and pasting the edge router config please if someone get review and see if the config is good.

  You need to change your ACL PAT of standard to extend and to deny traffic to be translated to the Pool of VPN:

  access-list 120 deny ip 10.10.10.0 0.0.0.3 10.10.50.0 0.0.0.255

  access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255

  access-list 120 deny ip 172.16.XX.0 0.0.0.255 10.10.50.0 0.0.0.255

  access-list 120 deny ip 172.1X.20.0 0.0.0.255 10.10.50.0 0.0.0.255

  access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255

  access-list 120 allow ip 10.10.10.0 0.0.0.3 all

  IP access-list 120 permit 192.168.XX.0 0.0.0.255 any

  IP access-list 120 permit 172.16.XX.0 0.0.0.255 aniy

  IP access-list 120 permit 172.1X.20.0 0.0.0.255 any

  IP access-list 120 permit 192.168.XX.0 0.0.0.255 any

  overload of IP nat inside source list 120 interface Dialer0

  no nat ip within the source of the list 1 overload interface Dialer0

  clear the ip nat trans *.

  Hope that helps.

• Password to access the wireless network

  I am trying to set up my iPhone to my home wireless network and I don't remember the password to access the wireless network and it drives me crazy! I'm going to network and sharing Center, then the properties of the wireless network. I click on the security is WPA-personal security type, is type of encryption: TKIP the box to show the network security key characters will not let me click on it. Anyone have an idea how I can access my own password?

  Thanks a lot, a lot in advance! Lisa

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  Contact support on the router's Web site people. Or reset the default router and start over.