Just bought an OJ 6500 has more. . Error email Undeliveralbe

Similar Questions

• HP OfficeJet 6500 has more - error Msgs

  My printer was working fine and then all of a sudden all the lights on the front began to blink and now my computer can not find the device. I am running Windows XP and connected to pronter via USB. I tried to turn on/off, reconnect the power supply and USB. I tried to reinstall the printer software. Can someone tell me how to solve this problem?

  Hello

  How it looks, unfortunately you can not. At this point, which seems to indicate a failure of the firmware in the printer. I recommend you contact the support for possible repair or replacement options.

  Technical support of HP, 1-800-474-6836 in North America. For all other regions, please click here.
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Thanks for your posts.

• Problem with Officejet 6500 has more wireless on my Mac running Lion

  I just got the Officejet 6500 has more. I was able to make it work with my HP PC Windows XP (would not work with the radio, but it's probably a problem with this computer - connected very well with USB). But I don't see the option to add it on my Mac (main computer) running OS Lion. I'm completely updated on Mac software. I see my other printer as usual (also a HP) on Mac.

  Tried to reboot several times. I looked on the HP site to various articles and it seems that I might need to make an update of the firmware on the printer, but when I downloaded the software (on the PC), my printer is gray and so wouldn't let me - or does not need the upgrade. Then. I can't see the printer on the Mac and don't know what else to do. Ideas? Thank you... Is the printer on my wireless network - I can not see the IP address and others.

  I don't really know exactly what I did - added to the printer with its IP address and manually the software (added name - I also had a HP update tonight for the printer software, but that only did nothing), then printing I tried and it still would not work.  I used the adjusted IP address, which I found on the dashboard of Verizon. And for some reason, once I put that in manually on the printer, it remained there, even when in desperation I tried to put it back the "detect network" setting. Sorry - but this is not quite logical or in the order.

  Also, I restarted the router, then the printer. Somewhere among all the things I tried, to my amazement, it finally worked! At first, I saw the IP address as the name of the printer (which I had entered it), and then he asked to be changed to the actual model. I did it and it now seems to work. Here, I could tell exactly what I did, but perhaps in what I wrote, you will get a glow and know WHY it worked?

  I wanted to thank you again for all the time you spent to try and help me get this working. It is really really REALLY appreciated and I definitely click the congratulations for you! Thank you very much!

• 6500 has more with error 0xc19a003e

  Out of the blue, our 6500 has more reported an ink system error, code 0xc19a003e.  Printer is about 1.5 years old; ink cartridges themselves are fairly recent.

  I tried the different cycling stages powers and have even tried to put it in a new print head, but nothing helped.

  Does anyone have a suggestion about how to fix this?  Hoping that I am now left with a very big (and expensive) scanner.

  OK, got it solved.  Basically, he had served three days unplugged from the wall.  I plugged it back to attempt a repair more, and he returned to the top without problem.

  So, if the "unplug both ends of the power cord for 30 seconds" does not work, can unplug it for a day or more and see.

• HP Officejet 6500 has more cartridge sit properly.

  I just replaced all ink cartridges in my HP officejet 6500 has more.  The yellow cartridge is not slam into the cradle, as others do.  Therefore I get an error message saying that the 'cartridge is missing or damaged."   What should I do?

  My operating system is Windows xp.  We are wired and I don't know if we are 32 or 64 bit.

  Thank you.

  

  Hi I think you are talking about the transparent plastic glass that precedes, it was old design but we have removed the same part of the design, but it should continue to work.

  THS printer type media.

  You have a spare cartridge to try to install and see if it fits.

  If this is not the case please call HP support and they should be able to help furthur.

  Thanks for all your support

• OfficeJet 6500 has more and XP

  I just bought a 6500 a more printer.  I was able to load the drivers and was able to print for a few minutes.  Then my pc under XP sp3 froze.  I thought it was just a reboot from installation.  After restarting the PC, I kept freezing.  He would go if I just left it to the desktop.  As soon as I open an app, it would freeze within 3 minutes.  It wouldn't matter if it is IE, Word or starts to scan a document.

  I restarted in safe mode, found no problem to connect to the event.  I could reboot and download printer drivers.  After reboot, I could open up Word and IE without freezing.  I downloaded the 6500 has more base driver and installed it.  It does the same thing.

  If I boot in safe mode, I am able to open programs and print.  As soon as I boot normally, it freezes.

  The gel is to listen to, click on the player for a few seconds, then the cursor will freeze or disappear, and nothing works.  Caps lock does nothing.  No disk activity.  CPU fan stops after a few seconds.  Just a nice office with Word open.

  If anyone could provide suggestions, it would be greatly appreciated.

  As there is no suggestion, I rebuilt my PC.  Installed the printer drivers before Micrsoft all its patches.

  Finally, was able to get the software to install.

• Why my hp officejet 6500 has more printer take ten minutes to four pages of fax?

  HP Officejet 6500 a Pus E710n-z series

  Windows 7

  Why my hp officejet 6500 has more printer take ten minutes to four pages of fax? No change has been made and no error message. This seems to be an extremely long time for only four pages!

  Firmware has been day t0 then did a hard reset and tested a fax. seems to be faster, but was not a very detailed page. will be able to say when I have more pages to send. If this is no better at this moment, will post back.

• Windows 8 does not support HP Officejet 6500 has more

  Dear all,

  My operating system is Windows 8, however, when I install the HP Officejet 6500 has more, I'm unable to install the printer driver. The error message "the operating system is not supported".

  I would also ask HP to meet this emergency request.

  Thank you

  George Tay

  Hello

  Where do you find the printer driver? From the CD? I believe that the CD is released before Windows 8. This can help:

  http://h30434.www3.HP.com/T5/Windows-8-release-preview/Windows-8-driver-information-for-LaserJet-ScanJet-and-other/m-p/1856247/highlight/true#M703

  Kind regards.

• OfficeJet 6500 has more printing problems

  My Officejet 6500 has more (model CN557A) is connected through the USB port.  My operating system is XP.    I can scan my computer, I can copy and print from the printer control panel, but I can't send anything to print from my computer.  This problem just started about 3 days ago.  I tried troubleshooting but I have not received the case.  I did not add new programs, and I have 194 GB free on my hard drive.

  Can anyone help?

  N ° however, I accidentally discovered the problem.  I had a card reader connected to my computer to download pictures.  Apparently it disrupted the cycle of printing for my printer.  I removed the card reader and the printer works fine now.  Thank you for your response.

• HP 6500 a Plus: HP 6500 has more won't copy

  This old all-in-one device has served reliably for many years until today.  It prints and scans but won't copy glass.  I unplugged the wall for 30 seconds and then tried a second time with the same results.  Help!

  Hi @nsbguy,

  Welcome to the Forums of HP Support!

  I see that you have problems of the flat bed scanner glass copy on your printer HP Officejet 6500 has more. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that this printer has been very reliable for you, which is nice to hear. I see that you are able to print and scan, but they are not able to copy from the glass. I guess that when you scan using the ADF?  If the printer is capable of scanning, it should be able to copy.

  To try to determine the cause, I will need more information.

  • Are you able to scan using the glass flat?
  • What happens when you try to copy?
  • What is the error message that you receive?
  • Are you getting what output it, or is it empty?
  • What you're trying to copy?
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would also try to update the firmware of the printer. Click here to download it.

  In the meantime, to help determine the cause, try the steps outlined in this document, HP Officejet 6500 has e-all-in-one printer series (E710) - copy and Scan outputs are completely black.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP officejet 6500 has more poster "original jam". There are no jams, how do I clear the message?

  HP Officejet 6500 has more poster "original jam.  Clear the jam, and then press 'OK' to continue. "There is no paper jam and the printer will print as long you don't try to use the automatic charger.  However, the error message continues interfering with scanning and other print jobs.  Any ideas on how to clear the error message?  I tried to reset, nothing helps.

  Thank you.

  Hello HPAllinOneSande,

  Perhaps there is a jam that is located somewhere on the printer. See if you can follow these steps to clean the error and the jam.

  ' Original jam: clear jam and press OK "Message displays on the all-in-one

• HP Officejet 6500 has more by using a different IP address than before

  I have a HP Officejet 6500 has more. Until yesterday, the printer worked wirelessly with my Mac OS 10.6.8 using the same IP address in IPv4 as the computer. I ran the HP Network Config page and it shows an IP address different today that it did. Is the message that I get when I send a document to print wireless: network host 192.168.1.101 is busy try again in 10 seconds.

  I checked the IP address of the printer and it is 192.168.1.100 (not 101). Therefore, they do not speak with each other. I treated all the solutions that I can find on the HP network to see if I can get the two survey periods to match and nothing seems to work. I turned off, turn off router, off modem, printer is off, turned off computer and lit them all back. No help.

  Any suggestions? Can I print using USB, but it's embarrassing.

  Something doesn't look good - maybe that I misunderstood... You say above, your computer and your printer had the same IPaddress and, when this is the case, you were able to print. Now, the printer and the computer have different IP addresses and now, you are not able to print. If this summary is correct, that then it seems to me that it should be exactly the reverse.

  If the IP addresses were the same, there is a conflict between devices, a bit like a mailman trying to deliver mail to two different locations which have the same addresses... What place receives the mail? It is normal for all network devices have their own unique IP address - how each device gets its own mail... or data packets.

  From the sounds of things, your printer is 100 but the MAC OS think its 101. Therefore, the print job is sent to 101 and never happens at the printer. You have two options... tell the OS that the printer is located at 192.168.1.100 or that, to avoid this problem in the future, on the IP address of the printer a static address, just guessing anything below 100, as 192.168.1.50 and then specify the operating system that the printer is located to 192.168.1.50.

  To make the choice of the latter, you must use your internet browser (Safari) and navigate to the 192.168.1.100 address. There is a web interface for your printer. Look for the network settings, then you can change the way that the IP address is obtained from dynamic (DHCP) static. And, after that, you need to find the IP of 192.168.1.50. It is also important to complete the subnet mask that will be 255.255.255.0. Finally, if your printer includes "web applications", you should also check the DNS addresses. You can use: 8.8.8.8 and 8.8.4.4 (Google's DNS servers) or 208.67.222.222 and 208.67.220.220 (OpenDNS servers)

  Note that when you save / apply the changes, you will lose your connection to the webinterface of the printer as the printer will have a new address. To return to the printer web interface, access the new static IP address.

  As far as to say where actually the MAC OS printer, the simplest option, as appropriate, is to use the HP tool to add a network printer or a device. To do this, AFTER you change the IP address. The HP software will scan the network printer and it should give you a result that shows the printer to the new static IP address. Installing and if possible, the name of the printer with a few references of "static HP or the"HPat192.168.1.50"set as default printer and remove the old definition of HP printer.

  The other option to speak the printer MAC must use Add a printer via system preferences > printer/Fax. I'm fairly certain that the MAC tools can analyze the LAN... in any case, it will be a more complicated procedure. Better for a user MAC more warned give assistance if you go this route.

  Hope this helps

• Impossible to update 6500 has more

  I have an Officejet 6500 has more than I bought the news about six months ago. I found that I can't update the firmware either wireless or USB. I spent about 3 hours on the a HP technician who was not able to solve this problem. This question has been sent to a higher level of HP support. I'm waiting for the return of their appeal. Someone have this problem with their Officejet 6500 has more? Have you found a solution.

  Has ever received a response from the level 3 support. Given that the HP support was not able to find a solution, I asked a replacement printer. It gave me the possibility of a replacement of 6500 or a newer model, Officejet 6700. I accepted the 6700. He should get in a few days.

• HP 6500 has more wireless printer = > hp eprint does not not with pdf

  I have a brand new HP 6500 has more the wireless printer.

  I tried to print using hp eprint Centre by sending a pdf file as an attachment to the e-mail address of printers.

  But the printer don't like pdf and print an error instead, with the message below page.

  =======

  Please wait...

  If this message is not subsequently replaced by the good content of the document, your PDF file

  Viewer is not able to display this type of document.

  You can upgrade to the latest version of the Adobe Reader software for windows, Mac, or lInux by

  visit blah blah blah...

  =======

  I see that I have a recent version of the Adobe reader - Adobe Reader X - Version 10.1.0

  Please help and let me know if anyone has already had a solution.

  HP customer support -?

  Thank you

  Antony.

  Oh... Yes. It worked. !!

  Thanks Jack for your contributions, which helped a lot.

  The issue was not with the printer, but the PDF itself was a secure PDF document.

  I tried to copy the document from my pc to mac and I tried to open the document, and what I saw, it was exactly what was printed earlier in my first post.  Tried to attach my email and once downloaded, the document had only those got printed text (also pasted below).

  It works when printing directly from the pc more (with or without wire) finally got. Seems good now.

  =======

  Please wait...

  If this message is not subsequently replaced by the good content of the document, your PDF file

  Viewer is not able to display this type of document.

  You can upgrade to the latest version of the Adobe Reader software for windows, Mac, or lInux by

  visit blah blah blah...

  =======

  Thank you

  Antony.

• OfficeJet 6500 has more on windows home premium 7 ad-hoc connection loss

  OS: windows edition Home premium 7

  product: officejet 6500 has more

  We organize a festival and everyone has a mobile phone that needs to print to the printer...

  We don't have a network or a router and try to connect 6 ad-hoc laptop computers to the printer...

  I managed to install the software on three laptop computers and a print ad-hoc wireless, but now he says that he does not find the printer over, even though the wireless network connections that the pc is connected to the network HPE710n.E5E3C5...

  I can't connect to the http://169.254.227.197/ (printer server) of this laptop...

  so he went completely downhill...

  on this laptop, I was able to print a page...

  on three laptop I was also able to print a page...

  but now he also says he «cannot communicate with the printer...» »

  is ad-hoc only for a laptop at the same time?

  What solution do you propose?

  can we do a completely wireless network with utp cable wireless router? and do a homegroup? and connect the printer with utp?

  is the special designed to accept prints six different cell phones at the same time?

  Thanks for any solution! We need it's really bad!

  With ad-hoc connections, it is really intended more for printing in a pinch without going through the hassle of setting it up on a network.  Or, you have two computers and you have connected it via USB to an and a laptop which is wireless, you can print via ad-hoc of the laptop.

  Honestly, I recommend picking up an affordable standalone wireless router (Netgear, Linksys, etc.) and connect the printer (wireless or Ethernet, does not matter).  From there on, connect the computers on this network and you should be able to install and print without any problems.  You can find the router could be useful beyond just this configuration or may be good to have if you plan to do events like this on a regular basis.

  The printer itself is not a router and communicting with multiple devices simultaneously may create congestion in causing connection problems similar to what you experience when you use ad - hoc for as many devices.