iPad does not print when B210 is in sleep mode

Similar Questions

• The mouse does not work when coming out of sleep mode

  I move the mouse to the computer of the mode "Eve".  Our journal 3 on tiles appear.  My husband,. admin Acct and finally my user account.  Admin account and my acct have the same privileges.  In any case... The mouse will not move the cursor at all once the computer wakes up from sleep mode.  My husband tile is highlighted and so I either hit tab again so he can highlight other options that I can hit enter too and I hope that the mouse starts to move the cursor.  It won't let me spend the good user.  If I type his password on his account, sometimes it works and other times it won't.  So I tabulate between change username and password reset and cancel until he started working.  Very frustrating!  I changed the batteries in the wireless mouse and it would work for a day or two and then same problem.  I also tried to return to an earlier point when the computer worked as it should.  Again... problem would return.  I have tried installing and re - install the intermittent operation of device (mouse) and then the next day would not.  Finally uninstalled this mouse and bought a new Logitech wireless mouse.  He began to do the same.  Help, please!

  Hello

  (1) work well before?

  (2) don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Make sure to enable the option to allow this device to wake the computer for the mouse and keyboard and check if this can help, follow the steps provided below.

  1. click on Start.

  2. now type devmgmt.msc in the search for files and programs.

  3. on the screen of the Device Manager, right click on the mouse and other pointing devices.

  4. Select Properties.

  5. now you must click on the power management tab.

  6. now check box allow this device to wake the computer.

  Method 2 : You can also try to create a new power plan and check if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Hope this information is useful.

• (Officejet 4500 G510g-m) does not print when turned on

  Device does not print when turned on. I then cancel printing, turn off, restart and it prints. All the diagnostic seftware shows green controls with messages like "printer ready" & "no problems found".

  Hi Donatkisson,

   
  1 have you made changes to your computer recently?
  2. you receive an error message when you try to print?
  3. What is the operating system installed on your computer?
   
  I suggest you to follow the steps and check if it helps.
   
  Method 1: Follow the steps in the link and check if that helps.
  Printer in Windows problems
  

  Method 2: You can also follow the steps in the link and check if it helps.

  Unable to print? Print jobs are stuck in the print queue
   
   

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.

• HP photosmart 7520: printer does not print when lite blue flashes

  I just noticed recently that my printer does not print blue wifi lite flashes when the icon of the printer on my computer says printer not connected, but it's all about.  Ive tried unpluging the router, then the printer and restart the computer that gets everything back up and working, but after a while it goes back to blinking and does not print what is wrong.

  Hello

  Asuming the printer is connected wireless, a flashing blue light indicates a lost wifi connection, the pritner is disconnected from your network at the time and so it will not be printed.

  I suggest to place the printer near the router, but not less than 2 metres. too far can cause the connection to become less stable, but also too close distance due to dead radio signal problems.

  Try putting 2-3 meters to test, make sure you there are no metal objects in the path between the pritner and router (which can affect the wireless radio).

  Other that those try after the following steps to solve this kind of problem:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer/5199461/model/5199462/document/c03381908

  Plwase informed me of a difference

  Shlomi

• documents of fact pending does not print when printing over the network

  Hello!
  Everyone! I have a problem, my printer don't Tróchez not print when I tried to print a copy using network.
  When I tried to print via USB cable, it works well.
  I don't understand how this problem can be solved.
  Kindly help me.
   
  Printer model: HP LaserJet M1120n MFP

  Hello

  Looks like the printer is not on the network or the ip address may have changed

  Please download and run the doctor for impression scanning HP, it will identify and solve the problem...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-120773-1&cc=us&DLC=en&LC=en&OS=4062&product=3447598&sw_lang=

  or you may need to reconfigure the printer to the network and to reinstall the printer drivers on the computer...

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• my wireless printer appear on my iphone and ipad, but does not print when prompted

  My ipad and iphone shows my printer wireless hp and said it sends to the printer, but nothing prints.

  Let's start by rebooting the router.  If this does not work, change the encryption from WEP to WPA (as appropriate).

• Since the last update my iPad does not print to printer wifi

  My iPad recognizes my wireless printer, but since the last update for IOS 10 printer prints about him.  However he takes the paper but give just on plain paper.  Can someone please? Thank you very much.

  Actual start simple with a reset. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait for your iPad to begin on its own.

  If the reset does not reset the wifi router by pulling the plug from the socket.

  Also do a print test by copying something to make sure that you have enough ink.

• IPad does not print, low on ink message

  I have iOS iPad running 7.0.3 and office jet 8500 a910 firmware lrp1fn123ar. AirPrint works ok until about a month ago, but it's not. When I print from an application such as the mail, iPad comes up with the message 'low on printer ink', followed by the message "check printer to find errors. The printer display comes with 'incompatibility of paper, paper size or type is incorrect. Printer is not low on ink and prints ok from my hp laptop wireless. Followed the guidelines of resetting hp and apple for router, printer etc., but always the same error each time. I also installed hp sprint app and same error comes.

  Hi Rowlinson,

  Thanks for the quick response.

  You're right, AirPrint is not an option to change the size of the paper so the when the print job is sent to the printer using AirPrint is search paper of the size of the document request. I suspect that the printer is 8½ "x 11" LETTER size research.  If you want to be able to change the paper size you can try to use HP ePrint app.  I have included a document with HP ePrint Mobile App FAQ as well as a document on how to get started with ePrint.

  For the invalid message of low ink, I have included a link to a specific document to this message when the ink is not low.

  Low ink warning message appears after installing a new ink cartridge

  http://support.HP.com/us-en/document/buu01850

  Getting started with ePrint

  http://support.HP.com/us-en/document/c03721293

  HP ePrint Mobile App FAQ

  http://support.HP.com/us-en/document/c01923321

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• Thunderbird does not load when open, even in safe mode

  When I open Thunderbird, it charge about 16 MB in RAM, and wedge. If I'm lucky, I can open Thunderbird using the Windows safe mode and safe mode of Thunderbird, run the program as administrator, but only once. Fail other attempts to open the program. I checked the parent.lock file and it does not exist unless Thunderbird is running. The user account is an administrator account, but the same thing happens with a standard account. Compatibility check says that the program is incompatible with any other suggestions. I tried to run under settings for Windows 7 and Vista with the same results. This happens before and after a profile import, omitting the extensions, a version of work using Mozbackup.

  All other programs are functioning normally.

  Acer SW5 - 012P type 2 in 1 computer, Windows 8.1 pro 32-bit, 64-bit based Atom, 4 core CPU with graphics Intel HD, Thunderbird 45.4, Kaspersky Security suite, installed from the same file that I used to work on a computer Windows 10 specifications similar.

  A dump is available from the Task Manager if necessary.

  The problem is cured but not resolved. Reinstall Windows by using an ISO from the Microsoft Web site restored normal operation of Thunderbird.

  I can only assume that something in the installation of Acer image was interfering with the loading, although Thunderbird (a number of different versions have been found) and Seamonkey mail were the only made programs. I thought I had deleted all the bloatware, but it is possible that something was still there.

• Windows does not work when the computer starts in mode 'sleep'

  The computer is easily adjustable in standby mode when I press on the eve of my keyboard key. However, when I want to start the computer again via push any key, the screen never shows anything (just fill black and nothing can be seen). Indicators power will return to the pilot and solid seems also lit, but just nothing display on screen. I have to push the power to shut down the computer completely to restart again.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info in the link above and in the "related links", including this one:

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  See you soon.

  Mick Murphy - Microsoft partner

• Captian El OSX with Konica-Minolta bizhub C454e does not print when codes active accountants

  Hello
  I am trying to solve a problem with 2 MacBook Pro running El Capitan trying to print to a Minolta C454e with accounting codes. Currently there are no problems with Windows machines on the network, and when I turn off the functionality of account codes to the printer, the MacBook can print normally. When I turn on the accounting function, the looks of MacBooks as it prints normally, however, nothing goes to the printer. No error code / notification occur in OSX or the printer. Have contacted Konica on the current driver and long story short, told me to call Apple (figures). After you have installed the printer driver, go into the features and layout introduction accounting codes and save the settings in a preset, print the application (for example, Safari). If you would be grateful if someone can point me in the right direction on what could be missed, thank you.

  -Vincent

  

  

  

  Unlike almost all other manufacturers of printer, Konica-Minolta did not an agreement with Apple to get Apple to distribute their printer drivers. The only source for Konica-Minolta for the Mac drivers is Konica-Minolta.

  I checked and Konica-Minolta have drivers for El Capitan. See http://www.konicaminolta.eu/en/business-solutions/products/office/multifunctiona l-printers/color/bizhub-c454e/download...

  We use a called package PaperCut to manage our Konica-Minolta printers and to allow us to assign account codes and generating billing reports. See http://www.papercut.com/products/mf/

• [Locked - Please ask a Question] My printer does not print when I run Firefox

  I can't print from internet when using Firefox. My printer prints fine when I use safari. To print from Firefox I copy and paste to a Word document. My printer can print fine from firefox, but it suddenly stopped.

  This has happened

  Each time Firefox opened

  is around March 2010

  For more than four days and no clear answer from you guys using Firefox.
  What are we supposed to do, when we encounter a problem like the one I tried to solve 'my printer prints not Firefox?
  Your explanations are that all suitable for Windows users and I AM A MAC OS X user.
  I'm a good customer for nearly a DECADE and I'm starting to think seriously that I'll look for another browser if you're not willing to help me. I need to print my stuff. It's not just for reading.
  Thank you. Hoping that you will send me a clear email ASAP

• iPad does not load when it is plugged.

  My iPad and iPhone don't charge at all or very slowly when it is plugged into the outlet House or in the car while they are on. They must be turned off in order to load. The battery icon shows that they are in charge. I use a couple of different USB cords. My main USB cords are cords original Apple. Would the battery icon show that happens when there is no change in the percentage of charge?

  Should I have all the applications closed during charging? Are my old just get or carry out USB connections?

  Thanks for any advice.

  Hello

  Buy a new apple charger also try another point of power.

  See you soon

  Brian