K1R25EA: paging to virtual memory to the hard disk, the use of 100% disc,

Similar Questions

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• In windows Server 2003 R2, standard edition, its CPU usage showing the use of 100%

  I have windows Server 2003 R2, standard edition, in recent weeks its CPU usage showing the use of 100%. While treated cheking, a process called 'System', showing the CPU from 97 to 98%, we have stopped other services one by one like Trendmicro and backup but none advantage, can you please help us?

  Hello

  Since you have a problem with Windows Server 2003, you can ask your question in the TechNet for Windows 2003 Server GENERAL forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• virtual memory is the low windows will in crease file size

  virtual memory is low windows will increase the size of the file some request may not...

  Here are some steps to solve your problem:

  http://pcsmarties.WordPress.com/low-virtual-memory/

  HTH

• Memory and the use of the disc on my IDS 4235 sensor & 4250.

  My ID sensor memory usage shows a use of 99%, and the hard drive is already 5 of the 15 Gig. Here is the log of "seeing the worm."

  With the help of 398913536 of 1980493824 memory available bytes (99% of use)

  With the help of 5 of the 15 bytes of disk space available (66% of use)

  -only the signature of med and high seriousness is enabled. Why the sensor used this memory?

  -Is this the sensor has IDS to a database that stores the logs which causes the hard drive used space? (considering that she has the management of the IDM)

  - Or any other reason why the hard drive used whereas the large drive space is new and operating time is 2 months?

  -Update of the signature file is adults who took over this large space on the HARD drive?

  Hope - could someone give me an idea why is it so.

  As I said earlier, there is not a problem with the use of disk space. Memory usage bug is fixed in the 5.X product not 4.X. However, there are some good bug fixes in the patch of engineering 4.1(4g).

  The number of real memory usage can be determined from the service account by entering the following command:

  Bash-2, $05 free

  total used free shared buffers cached

  MEM: 1934076 1424896 509180 0 18284 1214536

  -/ + buffers/cache: 192076 1742000

  Swap: 522072 0 522072

  The "Mem:" line and the column 'pre-owned' is the amount of memory (in kilobytes) that

  the command reports "show version". However, this total includes the

  amount 'caching '.

  So in the example above, the actual memory used is (1424896-1214536), or

  210360 KB. It is (210360 / 1934076 * 100), or 10.9% of total memory.

• lost all the images contained in the "my pictures" file on the hard disk while using Windows Live Photo Gallery

  I lost all the images contained in the "my pictures" file on the hard drive.  The files are there but when I open the files they are all empty. It's like some 50 folders and each folder contained about 25 or so images jpg. I lost the using the "windows live photo gallery» I found a thread that someone else has had this problem and only one answer was to check the checkbox 'Show hidden files'. I have done this no luck there. When I open "windows live photo gallery" all records are on the left of the window but empty. I did not send any of these files to the "trash".  Can someone tell me how to recover these?

  You ran the scanner of MS too? It will take some time, but it must be done. If a virus is responsible for it must be nuked before he can ravage any more.

  Send all the pictures? You can still recover these - and get some help course in order to avoid this sort of thing. External hard drives and online storage are worth a small spending to protect valuable files. I also keep the dvd - outdated image files but enough fix if even they can deteriorate over time (but don't we all!)

  Let us know if the scan MS lands anything - run the full scan - it will take time.

  Best - R

• Folder is a virtual computer in the use of Get-View

  All, I run a script to collect information on the virtual machines in the environment, but have not been able to figure out how to get the file to in the virtual machine is.  I know I could use a get - vm | Select name, file etc. but at the time wherever I have add a get - vm statement, I'll add a TON of execution time of the script.

  I currently use it as my get-views command...

  Notice-EEG - ViewType VirtualMachine-Name property, Runtime.Host, Config.GuestFullName, Config.Annotation, Config.Hardware.NumCPU, Config.Hardware.MemoryMB, Guest.Disk, Config.Template, Guest.IpAddress | Sort-Object-property name. %{
  If ($_.) Config.Template - not $true) {}
  $row = "" | Select-Object Name, Notes, MemoryGB, host, CPU, OS, Cluster, IPAddress, DiskSpaceGB, UsedSpaceGB

  ....

  I know I'm just grabbing some properties, but I was not able to find the property that gives the name of the folder.

  To try to find the right one, I did

  $vm = get-View - ViewType VirtualMachine-filter @{"Name" ="VM_Name"}

  Then just walk through the $vm variable. (Property) etc.

  Anyone?

  In the VirtualMachine object, the Parent property contains the MoRef (pointer) to the object of the file.

  In order to

  Select Name,@{N="Folder; E = {Get-view $_.} Parent | Select name - ExpandProperty}}

• No network on the virtual machine after the use of converter

  I was running a basic vm (WinXP) on an esxi4.1 host running short of disk space.

  So I ran the vCenter Converter Standalone client to copy the original VM on a new - the only thing that I changed the size of the disc thin provisioned avaiable.   The copy/convert seemed to work your.

  I started in the new virtual machine, and it came exactly as the old one (with the largest disk).

  ... but the network on the works of more than vm.

  I can still use vSphere to connect to the esxi server and bring up the VM console (which tells me that the network the server works very well).  When I look at the configuration of the virtual machine, it looks exactly like the old (complete with a network powered).   But on the virtual machine, I can't even ping the router, much less get to the dhcp server.

  I even went so far as to stop the virtual machine, remove the network card, restart the virtual machine (if the network has been removed from the virtual machine), stop the virtual machine again, add a NEW network adapter.

  Still the problem remains.  The virtual machine has a network card - but has no network.

  A few thoughts:

  You use a managed physical switch? If so, check if the MAC address of the VM is seen on one of the uplink ports.

  The network management and the virtual machine using the same IP subnet? You could probably try (if possible) is to create an another vSwitch and attach the XP VM to it to see if there is a problem with the virtual machine and the management on the same vSwitch network.

  André

• using the VMware workstation 100% disc

  Hi all

  I have amd multi-purpose 8350 with 12 GB of ram and 1 TB hard drive (no ssd). I created a few 10 vms and when I try to start few of them suddenly disk use increases to 100%. I turn them all at the same time, I give some time between each vm poweron. Always the same problem occurs. In addition, even after some time, after activating my vms, same problem occurs. on my windows host computer, the use of the disc is 100% most of the time. because of this my vmware workstation crashes and I am not able to do anything. I have to wait until the use of the disc is free again. I disabled windows search on my host machine, but no luck.

  I added the lines on all my machines virtual vmx files but no use.

  
  

  MemTrimRate = '0 '.

  mainMem.useNamedFile = "FALSE".

  sched.mem.pshare.Enable = "FALSE".

  prefvmx.useRecommendedLockedMemSize = 'TRUE '.

  
  

  Can someone help me out here?

  
  

  Thank you

  Chaitanya.
  

  Hi Shawn,

  Thank you for your response...

  At start-up, if it's slow, it's fine. But it happens all of a sudden, even when I'm working. When it freezes, I can't do anything. Just count numbers to kill some time... I have to wait until he's back to normal and I donno when it happens.

  While I was looking on the internet, someone posted on an Internet site that disabling superfetch-bit, and windows update services can reduce disk performance. I'm 100% sure they are stopped on my windows host computer. So, I disabled the. But I was really surprised to see the performance of disk after I disabled the services. Now, I have a lag for a few seconds and that occurs only when I start the vms system. After that they are running no problem at all. I donno why a stopped service would cause such an impact. Subsequently, if I do not have a service, I turn it off, turn it off.

  Finally, after you turn off the 3 services, I have no problem.

  Thank you

  Chaitanya.

• Is it possible under the EULA to have several virtual machines on a single physical hard disk while using the same OS license or do I need a separate license for each virtual computer?

  I have several programs that are not compatible with my 64 bit Windows 7 operating system.  I would like to run each different software under another virtual machine of VMWare (5 packs of different software programs and 5 different virtual machines of Windows XP).  These would all be installed on your laptop.  I can use the same license of Windows XP for each virtual machine, or do I need a separate XP license for each (different XP in case 5 licenses)?

  It is lifted directly from my EULA:

  1. GRANT OF LICENSE.

  The manufacturer that you grant the following rights, provided that

  comply you with all terms and conditions of this EULA:

  1.1 installation and use.  You may install, use, access,

  display and run one copy of the SOFTWARE on

  THE COMPUTER.  The SOFTWARE may not be used

  by more than two 2-processor both on the

  COMPUTER, unless a greater number is

  indicated on the certificate of authenticity.
  Then...
  This means that as long as you are running two or more instances of XP at the same TIME, you agree? Or does this mean that, after you install once, you have reached your limit?
  I imagine that most people (including those who are running Microsoft!) will say that the second interpretation is correct.
  However...
  If this is the case, anyone their hard drive as a backup to clone strategy would violate the EULA!

• Something that eats all my memory? (or hard disk space?)

  Hello

  Someone told me that there is something in Adobe Premiere Elements, I have to turn it off because he eats memory unnecessarily.  Is this true?  If so, what do I need turn off.  All I know is that my laptop is full and I think not I that much on this subject and I have a hard drive with a capacity of 250 GB.

  Thank you.

  lithea

  I just understood what your tour focused on when I came across your question first Elements 8 wireframing.

  In the first Element 8.0/8.0.1, features automatic background rendering and AutoAnalzyer are large cards for the acquisition of it resources.

  The Premiere Elements 8.0.1 update was supposed to take care of the auto part background made by disabling its default state.

  The part AutoAnalzyer, that you had to take care of you.

  1 automatic background rendering.

  Go to the workspace of Premiere Elements 8.0/8.0.1 timeline Edit Menu/preferences/general and make sure that there is no check box next to the

  option on the bottom of rendering.

  (If you have not download and install the 8.0.1 update, please do so.) See the help/update Menu. If this does not work, then use the 8.0.1 download

  Adobe Adobe - Premiere Elements: For Windows: Adobe Premiere Elements 8.0.1 update

  Once installed, it will not be "8.0.1" view.

  2 AutoAnalzyer

  In the workspace of Premiere Elements 8.0/8.0.1, click the Organizer tab in the row below the active host header to open the Organizer workspace of elements. In the workspace elements Organizer, go to modify the Options of Menu/preferences/AutoAnalzyer and disable all options in this category.

  To return to the workspace of Premiere Elements workspace organizing items in the Organizer workspace of elements, click the file Menu/Exit.

  For any question or need more information, feel free to ask.

  Thank you.

  RTA

• Hard disk crashed using code produces the same different hard disk... Help?

  I am able to use the same product key for windows 7 if my hard drive crashed? My hard drive has been a * on me. I replaced and tried to use the same product key for windows 7 on the same computer, but with a different hard drive. Is this possible or do I have to buy another. That seems unfair, but I must say that I bought windows 7 and now I receive a notice of infringement on the desktop on the windos 7.

  License status: Notification
  Reason for the notification: 0xC004F009 (grace period expired).
  Remaining Windows rearm count: 4

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Qosmio G40 - problem with the use of 100% of the CPU

  In recent weeks I have problem like describbed here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=126670𞻎

  Almost the same thing - my computer starts and works ok, but from time to time is frozen by Symantec Service Framwork and all other descriptions are the same.

  "After having been inactive during these seconds, the cooling fan will start to operate at maximum power, creating a huge noise, that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs." Force a reboot is all what I can do. »

  Almost all accidents that this question was by NIS2008, but also Vista explorer.exe and fingerprinttray service or the service of the Index process.

  I received a notice from the team of NIS that I get to use the new NIS09, and for sure that my machine is damaged - check it out here http://community.norton.com/norton/board/message?board.id=nis_feedback&message.id=6964&quer y.id = 22439 #M6964

  I called the Service, which has changed the ATV and CPU - I changed to NIS09 after, a few weeks was good, but now the problem back - in the last two weeks twice. (I observe that starts about 5 minutes after download of updates to NIS (I know cos NIS 09 indicator of that time).)

  One change - Vista is able to kill that process damaged (Admins have no right to do), starts the process of WeAreFault, which sends information on crash for MS - after about 15 min computer starts to work properly without reboot... so I think that a problem is somwhere on the line between Toshiba and Norton, cos repair also change in behaviour of the machine - is now using work not CPU around 20% - before was 50 to 70% and 100% of crash. Norton is also, but must for this.

  Does anyone have a conclusion?

  Generally, I don't like Norton because he needs as many resources and make the laptop lazy. On the net, you can find very good alternative applications.
  Have you tested how the laptop works after removing the NIS?

• Help... How I adjujst or prevent the use of 100% of the CPU almost always?

  I'm constantly waiting for that and that there must be some setting I am missing to fix. I X-out of all the tabs not use and noticed that a lot of pages (including Hotmail) has lots of entertainment at all times. Also videos and facebook, some. Anyone with the magic of this situation? Thanks in advance...

  Hello

  Try the methods and check out them.

  Method 1:

  Boo the computer in safe mode with network and check if persists it to the question.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  Check out the link and follow the steps.

  Optimize Windows 7 for better performance
  ttp://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance h
   
  Method 3:
  You can also check out this link and try the steps.
  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

• Windows to the use of 100% at boot disc / when I try to sart mozilla firefox withn ~ 5 minutes of launch laptop freezes.

  I've never had this problem before the last update. When I start my laptop as a first step, it is 100% use of the disc and remains like that during between 5 and 10 minutes. even when I use the Task Manager and force close to the main users, it is always at 100% usage. If I try to start mozilla firefox before it my phone freezes and I have to force close down. is it possible to fix this? or if not is it possible to go back to my laptop to before the last update?

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  
  

  Please run the trace by using the configuration of restart.

  Record an open work because it will restart your computer 2 or 3 times.