Kaleidoscope images with reticle
Hello
I have this vi I want to make changes to the sample.
can someone help me please.
I have this situation, as the first image is centered, the viewfinder is drawn correctly.
While the rotates, the viewfinder is also drawn, but it is not properly established. can someone tell me what I can do about it?
Here's what I have.
It is a good draw crosshair...
It's BAD
That's what I need to have. (YELLOW LINE)
krispiekream wrote:
do you know where I can find
information about the calculations for measurement with X, Y axis?
Here, in your code:
Andrey.
Tags: NI Software
Similar Questions
-
Multiple images with the same file name no doubt prevent export
iMac running OS X El Capitan v10.11.6; Photos 1.5
I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images. Then the report gives me the names of files of the first 100 images for which files were not created. After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question. I can't change the names of files by right click on "info". I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem. I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end. The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts. I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.
From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets. For the other photos other than Canon, is possible to rename images during the import of the lot?
All advice and help will be GREATLY appreciated!
Finder has the ability to rename files with various models of lot. Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".
-
As stated, whenever I have download an image with the command "save image under" he recorded in a useless file of 168 bits. This does not happen everytime I have save an image, but more often the not, and I don't have a lot of useless files hang out because of this. Is it possible to re - download each image 168 bits that he should have been downloaded in the first place? Is it possible to ensure that this does not happen?
Here's what it looks like:
http://i.imgur.com/yzgwwgC.gif?1This means that you are not allowed to do this action.
The site could use a transparent overlay image to protect the actual image or otherwise has put in place a protection.
You can check if see you the image in "tools > Page Info > Media ' and save it. -
Right-click on the image with link problem after upgrade to 11.0
After the upgrade, whenever I do a right-click on an image with a link, it opens the link rather than opening a menu drop-down. Any idea on what is causing this behavior?
OK, think about it. Extension: Tab Utilities was the origin of the problem. Uninstall completely solved the problem, disable it does not solve it.
-
Problem loading the images with the php script.
As a webdebdesigner that I developed a cms system to download images with php to a mysql database. Firefox version 5.0.1 for MAC and earlier versions have no problem with the script download. But after this version, it is impossible to upload images more large then 250 KB. The page where the customer chooses his image for the download hangs and the form is not sent to the real upload script, which must validate and process the image.
This problem only occurs in Firefox, all other browsers work fine!
In addition to this: give feedback for firefox is not possible for the Mac.Try announcement Web development / standards evangelism MozillaZine forum. The helpers there are better informed on issues related to the development of website with Firefox.
http://forums.mozillazine.org/viewforum.php?f=25
You will need to register and log in to post in this forum. -
Masking an image with a shape from Keynote for the iPad?
I am actually writing an article in support for a Web site and it does not seem you can mask an image with a shape from Keynote for iPad - something that is incredibly easy to do in the version of OS X. Clues on how to achieve this in the iOS version of Keynote?
Thank you.
Nevermind, I found the answer - all we need to do is add the image AND form of the slide, then select both at the same time. One of the choices that is displayed in the context menu is "mask with shape.
-
How to superimpose a tilted image with retangle part
I know IMAQ overlay Retangle.vi can overlay part of an image with retangle, but I want to overlay with inclined retangle (see overlay.jpg), how can I solve this problem?
Thank you
Hi, skyover,
Just create rotated rectangle KING, then KING of overlay instead of the rectangle:
Andrey.
-
How can I import an image with transparent background .png in the Vision Assistant?
Hello
I am using the Vision Assistant of NOR. Here, I want to overlay one existing image with another. Therefore, I use the overlay Installer where can I import a .png image. If I do, I don't get
the transparent background of the back of the image, even, I was saved with a transparent background. The image is displayed with an orange background.
If I import the same image to any front panel for example, I see the picture on the right path with a transparent background. What I've done wrong? I have attached the image I want to use.
Thank you
Hello! Don't know how to do this in the Vision Assistant. Try to use the overlay (bitmap) or convert your image into mask. Effect of transparency not supported in the Vision. What you can do in LabVIEW is something like this:
-
Create the image with black and white patterns
Hello
With the attached VI I am able to create an image that is completely black (or white or any color according to values in the color palette). See picture1.
Is it possible to create an image as photo 2 and photo 3 or any other form which consists of black and white patterns? I need an image with black and white areas that a camera can recognize.
Thanks for any help.
-
Acquisition of images with 3 USB cameras causing too many uses of the memory/cpu
Dear experts,
I'm trying to capture images with 3 cameras USB, located in 3 different positions. I have to initialize each cameras using USB list vi camera when switching between cameras. I realize that, by making this method causing too many uses of the memory/cpu and can cause CPU hang up. If I stop the program, the memory/cpu counter are down.
Do you know how to reduce this problem.
Thank you
Hart
-
Saving binary Image with overlay?
Hello
I'm having some trouble in saving an image with overlay information. I use IMAQ find circles to measure the rays of the holes in a binary image. Hole data is then used with oval Overlay IMAQ, draw on ovals to highlight detected circles. Works very well and the image is displayed as expected in the output of the image on the screen, the palette has the binary value. (See the second image of 3, below)
When I try and save the image in PNG I just get a blank image (black). If I use the overlay IMAQ merge tool, I just get the green circles on the black (see the last picture of 3 below). Is there something I'm missing with pallets/fusion? Any help much appreciated. Snapshot of the (messy) code attached.
The problem is that the binary image is all zeros and ones. A normal image goes up to 255, so the value 1 appears black.
One solution is to multiply the binary image of 255, which makes the image black and white.
Bruce
-
Rolling/down shifiting image with low level acquisition of VI
Hello
I do image with low level VI acquisition acquisition. The series of captured images appear as an image rolling/down shift. Each image is captured moves down again and again. If frame 1 a row of pixels is 0 when the row wherever the 100 frame is captured rank 1 is at line 100, giving the impression of the image slowly moving down.
I enclose a small program through which I am able to reproduce the problem. The help of a 1426 PCI capture card and an impressive camera (double IPX-2M30H-L).
Can someone tell me please what is wrong with this program and how I could fix this?
Thank you
Sandeep
-
Hi guys,.
Anyone know why, when I try to open an image with camera raw in Bridge, it is said: the camera raw editing is not enabled. Camera raw edition requires a product calling has been launched at least once this feature. What should I do?
Thanks in advance :)
original title: problems of camera rawTry the Adobe forums
-
How can I / display a photo or an image with information/inscription beside or below the picture.
using a Windows Livemail email or a hotmail.co.uk email which will be sent to the recipients.
This would serve to inform the beneficiaries of a concert or opera.
I received emails showing a photo or a logo with details of concert placed next to the logo.
James Ward 1939
Please ask Windows Live Mail in Windows Live Mail Portalsolutions Center. Hotmail questions belong in the Portal of Hotmail.
-
Replace the Windows 8 of HPs recovery image with windows 8.1
Hello
Is after going through the upgrade process to windows 8.1 on my HP Envy X 2, now possible to replace the recovery image by default on my partition recovery with one for version 8.1? I don't want to have to re - update if I do a "refresh your PC without affecting your files' or 'remove all and reinstall Windows.
Is it possible and supported by HP to change the recovery image in the recovery partition?
If so, is there any procedure for support to do?
Concerning
Anthony
Sorry, but no.... the Windows 8 by default on the HP Recovery partition recovery image is the only one available. It's the image of origin provided by HP and there is no procedure or the option to change or replace this image with a newer version.
Please see HP Forun thread titled "8.1 recovery disks" for more information on this topic. My suggestion is to use Windows "Backup of System Image" utility to create a picture of the partition Windows 8.1 as it is currently, on an external hard drive. If your computer develops questions or you need to replace the hard drive, all you have to do is to "restore" the image on the computer. Please see Windows 8.1 Tip: use System Image backup for instructions on creating and restoring a 'Windows - System Image backup.'
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
Maybe you are looking for
-
I can't open or open the folder containing information that I downloaded!
When I download a file, it appears in the download list, but I am unable to do anything with it or copy it to another location.
-
my downloaded file came same extention how show me defalt extenstion?
Dear friends... my computer has a problem when I download a file it will be Media Player file came how to change the problem. I'm feel like I downloaded a file, it will show same file, please give me a solution for this...
-
Trackpad guard switching pages/windows
I don't know exactly what I'm doing, but maybe 1 out of 5 times I put my finger on the trackpad to do something on a page, he slips the page more to something completely different, as if I had to hit to swipe on the left side of the screen to bring u
-
I would like to understand this connection problem has dropped. I have a wrt54g v5. For several months I had a loss of connection once a week. It now happens several times a day. My installation includes a Motorola Surfboard Modem in the Vonage WP2 w
-
How can I get rid of the blue name and the date that is entered under the signature
How can I get rid of the blue name and the date that is entered under the signature