Kaleidoscope on the bleed

Similar Questions

• The bleeding of printer ink on paper. How can I solve this problem?

  The bleeding of printer ink on paper.  How can I solve this problem?

  This looks like a problem with your printer, not Microsoft Windows. Try the following:

  -Remove the ink cartridge and check it for damage. Replace if necessary.

  -Try to use a new cartridge; the contacts on the old can be damaged.

  -Maybe your paper is too thin or absorbent. Try a different paper brand.

  -If no other solution doesn't work, the problem is probably the printer itself. You may need to replace it. (You don't need to do unless nothing else works)

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• How to change the bleed on one side

  Does anyone know how change the bleed on one side, but leave the rest the same?  For example, I have to design a Pop Up Banner and background must be 3 "purge and high. 25 "bleed.   How can I adjust the purge of a down is greater than the upper?

  
  

  Thank you

  Steve

  Expand the file space

  Slide down the rule at the top of the file guides (view > rulers)

  Add a blank layer (which is optional) and draw your own brands of pads to show the allocation of purge

• Question about the bleeding and facing pages.

  Hello

  I'm in trouble with my first InDesign document which is a 96-page Magazine. It will be printed on sheets A3 stapled in the middle. My impression of the guy said it's ok in the form of A4 pages with 3 mm overhang.

  So now when I try to export in pdf print (I check the brand I want to use the documents of bleeding parameters) exports with the sections on the left and right pages (left page exported with? I guess than 3 mm? bleed from the right page and so on). If I replace the parameters bleeding and I set to 0mm it is all ok, but I fear that certain images or text could get cut because I have everything with the substantive benchmarks lost in indesign.

  And I can't uncheck pages face to face since I have some graphs (graphs and so on) that spread from one page to another (on the same spread).

  My question is... I can do and always use the bleeding or (ignore "inside the bleeding' or something) or is it OK to use the export as a spreadsheet instead of individual pages because he wanted pages A4?

  Any help for a beginner would be appreciated. Thank you.

  "' You can set inside bleed to 0 in the configuration dialog of document or in the export options when you make the PDF, or if you absolutely need to have inside purge for creep (want, but check with the printer), see InDesignSecrets" Blog Archive "Pages Breaking Apart to bleed off a spine

• How to set up the bleeding?

  Hello

  I have a bleeding on one edge of my page. I can extend the image of 1/8 inch off the page, but am unsure if this so will produce the desired result for the print provider because I do not see it in FM12. Am to distribute a PDF file, the best way to implement a bleed?

  FM page size is independent of the size of sheet that you specify in the output when creating the PDF file. FM will attract all the objects on or off the 'page '.

• 'Show Print tiling' has no effect despite the bleeding of document and settings reset in Illustrator CC

  I'm having a problem with the menu option "Show Print tiling" works do not at all.

  I have setup a bleed for my document and even tried a reset of the parameters.

  The dotted line indicates the area that your printer is capable of printing. So it depends on which is configured in your printer driver and the print illustrators dialog box.

• How to prepare the PDF for printer when you print spreads with bleeding

  I have created a 12 - page document that is willing to go to printer. The front and rear cover a bleed on it and not too sure how to prepare the file.

  I sent unique pages with printer in the past harvest files so they can print as a booklet on their end, but this one is a little tricky because of the purge. I have been able to manually create a file of InD 11 x 17 and throw out and export that in PDF with crop marks, but something tells me that this is not the best way.

  For this work, I send you the original InD file so the printer can do everything they need to do to make things, but I would like to know for future reference.

  Thank you in advance!

  A 12-page document would print on 3 sheets of paper, so inside purge (on the back) probably won't be a problem, so you can set it to 0, or let the same thing that the bleed on the outer edges and let the tax to the printer software ignore it (assuming you let the printer do its work to impose). Send a PDF of 12 pages (with bleed) in consecutive order would be normal childbirth.

  But still, when you have a question like this, you should call and ask what they want to the printer.

• Bleeding with the PDF file does not. Help?

  I created a 8.5 x 11 file in illustrator with a bleeding .25inch on all sides and saved as a PDF for printing, but there is still a white border on the edges of the paper.

  Is it because the printer does not recognize the bleeding? I ask this because at first the printer want print on paper 11 x 17. It's a dealer to print FEDex Kinkos incidentally.

  Please let me know any tips or recommendations. Thank you!

  Very little focus on the toner to printers can print edge on board. That's why when you print on a sheet of 8.5 "x 11" ", even if you print to the edge, you'll probably find up to 0.25" white margin around the page. " There is nothing that you can do directly about it.

  This is exactly why FedEx desktop recommended print on 11 "x 17" that would have allowed the full 9 "x11.5" surface printing, including bleed, to print on the sheet and you to adjust well to 8.5 'x 11' with printing to the edge via purging through your design. "

  -Dov

• Bleeding from the inserted PDF

  Hello.
  Il Rectangle. It inserted in PDF. How do you know the size of the bleed de it inserted pdf?

  It seems that you may not know. The only property that sounds as if it was helpful is pdfAttributes, but that (a) is read-only and (b) only tells you If Crop to bleed was used when you place the file.

  You can even not sure that if you place the PDF even page twice, once with and once without bleed, because the bleed for the left, right, up and down can have any value - they are not having the same.

• Bleeding question

  It is perhaps an obvious question, but I'm trying to understand the point of the bleed - is - to avoid to have white borders? Why don't you just stretch or crop the image at the edge of the document rather than allow more bleed?

  The purpose of the purge must take into account the fact that no cutting or cutting die will hit the mark perfectly every time. With this print outside the intended cutting area margin, you won't wind upward with a Ribbon of the display when the knife is off by a little white.

• Definition of area of purge without any effects in the document size dialog box

  Hi all

  
  

  Can I create a new document with the bleeding, it works very well. Should I try to change the lost funds, it seems not to be saved by the document size dialog box.

  
  

  Here is my code to create the document:

  NewDocCmd InterfacePtr < ICommand > (() Utils < IDocumentCommands >-> CreateNewCommand(K2::kFullUI));))

  NewDocCmdData InterfacePtr < INewDocCmdData > (newDocCmd, UseDefaultIID());

  newDocCmdData-> SetCreateBasicDocument (kFalse);

  newDocCmdData-> SetNewDocumentPageSize (PMPageSize (width, height));

  newDocCmdData-> SetWideOrientation ((width>height)? kTrue: kFalse);

  newDocCmdData-> SetMargins (left, top, right, bottom);

  newDocCmdData-> SetNumPages (numPages);

  newDocCmdData-> SetPagesPerSpread (1);

  newDocCmdData-> SetColumns_4 (colNum, gridDist, IColumns::kVerticalColumnOrientation);

  newDocCmdData-> SetUseUniformBleed (false);

  PMRect bleedBox.

  bleedBox.Left (mm2pt(bleedLeft/1000.f));

  bleedBox.Top (mm2pt(bleedTop/1000.f));

  bleedBox.Right (mm2pt(bleedRight/1000.f));

  bleedBox.Bottom (mm2pt(bleedBottom/1000.f));

  newDocCmdData-> SetBleedBox (bleedBox);

  Create the new document.

  CmdUtils::ProcessCommand (newDocCmd);

  The document size dialog box shows my correct bleeding.

  And this is the code I use to change him bleed (suppose bleedBox has different values now):

  InterfacePtr < ICommand > pageCmd(CmdUtils::CreateCommand(kSetPageSizeCmdBoss));)

  InterfacePtr < IDocSetupCmdData > pageData (pageCmd, IID_IDOCSETUPCMDDATA);

  pageData-> SetDocSetupCmdData (docRef, PMPageSize (width, height), 1, 1, width > height, kLeftToRightBinding, kTrue);

  pageData-> SetUseUniformBleed (false);

  pageData-> SetBleedBox (bleedBox);

  The SetPageSizeCmd process

  CmdUtils::ProcessCommand (pageCmd);

  No error, but also no change in the dialog box the size of the document. Purge values are unchanged.

  What else I have to call the dialog box to show my new bleeding?

  
  

  If I give the word

  	BB2 = pageData-> GetBleedBox();

  then bb2, later the (modified) values.

  
  

  Thanks for all your advice!

  
  

  kb_alfa

  Hi kb_alfa

  Use kSetPageSetupPrefsCmdBoss instead of kSetPageSizeCmdBoss

  -Manan

• Problems with bleeding by menu accordion, in sensitive site of things

  I use a template from another company that uses new reactivity. Everything is great except when I shrink browser to work and my combo accordion comes out. The text under it is bleeding through or will not get pushed down. I thought it was just the template/widget so I created my own and has always the same thing. This is the Web site, once you have your retractable browser and use the new Tablet nav menu.

  http://epicquestgames.BusinessCatalyst.com/about-us.html

  Thanks for all the help,

  Richard

  Accordion, like the other pin objects, does not effect other elements more. In this case, the respective option in the widget sccordion is misleading. The Muse team explained that the old behavior now is considered a bug.

  The "bleeding" text seems to be a problem of layer. The text element is placed "on" menu items. To resolve this problem, open the "Layers" Panel, create a new layer and above all others and then drag all the header and menu on it items.

• Connect Photoshop CC and Mehdi Kaleidoscope 2.1

  Hello

  I am a relatively new user of Photoshop CC and is interested in experimenting with creating effects Kaleidoscope using the Mehdi 2.1 Plug In that I downloaded from the site Kaleidoscope 2.1 Plugin - Mehdi - Plugins Photoshop

  However, when trying to use it, I get the following message

  Plug-ins that could not load:

  Kaleidoscope 2.1 NO VERSION - from the file 'kaleidoscope2-1 '.

  . Sorry to his ignorance, but I don't know how to solve the problem.

  Thanks in advance

  Helen

  Hi Helen,

  The Plugin manufacturer did not mention details of compatibility this product on the website.

  Please contact them and see if it is compatible with Photoshop CC.

  Kind regards

  Assani

• How can HI I create a printing guide for my business card with a size that includes the purge (3.75x2.25)

  

  It should look like this, the paper size is 12 in. x 18 in. thanks

  Create a 3.5 "x 2" "document to. 125" bleeds, the design of the map, place the file in the IDENTITY card in a 12 'x 18' document, step and repeat. " In this case, you can make corrections to a master doc and update the doc step and repeat. When you place the card check Display Options, so you can set with the bleeding.

  

  

• Import PDF crop and bleed marks only appear not

  Whenever I place a PDF with printer marks in Indesign the bleeding and crop marks are not displayed. I've never had this problem with Indesign before and I can't seem to find the import options.  I have the 2015 version currently installed 11.0.1.105.

  Help, please!

  If you do not see the checkbox Show Import Options that you can hold down the SHIFT key when you click OK to open the dialog box options. Choose media such as the option to harvest.