Fake email apparently sent between me and a contact. Subject "Re:

Similar Questions

• Difference between known and unknown contacts?

  What is the difference between the known and unknown contacts?

  I'm new to Eloqua.  Is there documentation or training anywhere where I can find the answer to these questions?

  Thank you.

  Hi Dwayne,

  Known: It amounts to contact (in Eloqua termanologies) is a list ofl e-mail recipients have e-mail address and you send or already sent an email (s).

  Unknown: The Contacts that are not in your database, Eloqua.

  Begin to know it section in the main menu to go the rest of the termnologies and all the knowledge you need.

  Thank you

  Amit

• Mail continues to blink the same email not sent to me and will let me not spending at all. Any ideas?

  My newly purchased and generally fabulous MB Pro has a malfunction in the mail. A partly addressed msg keeps flashing on the screen and I can't remove it. Can I delete the mail and start over?

  Yes.

  Note:

  A new Mac comes with 90 days of free technical support, AppleCare.

  AppleCare: 1-800-275-2273

• Power outage and restart, my outlook emails, drafts, sent items have disappeared.

  Power supply Switched on pc and waited while it rebooted and checked himself, on the prospects for opening all my emails, drafts, sent itmes, folders and contacts passed. Can I get back them?

  Hello NeilPond,

  In addition to the post of Bruce Hagens, I suggest trying to perform a restore of the system to a point in time before the failure.

  How to restore Windows XP to a previous state:

  http://support.Microsoft.com/kb/306084

  If this does not work and you have a problem with Microsoft Office Outlook, I'd go to the link provided Bruce.

  Microsoft Office Outlook Forum
  http://answers.Microsoft.com/en-us/Office/Forum/Outlook?tab=all

  Thank you

• Microsoft sent an email asking for your username and password and what country you are, of stateing, that they were up-to-date at your service

  Original title: microsoft servvice

  I wanted to know if microsoft has sent an email asking for your username and password and what country you're stateing they were at your service day and need information to do

  Microsoft will never request this information in an unsolicited email. They are very likely that ask for any sort of password under any circumstances. Scam. Phishing attempt. Fake. Choose your own description. No Microsoft.

  Tom Ferguson

• I use different e-mail accounts: I send an email with the sender A (standard!), email is archived to the sender sent archive and the email is sent to the sender, B

  A really strange problem!

  I use different e-mail accounts. I send an email with a sender (defined as standard!), email is archived in archive A sent from the sender, the sender is wrote in the header of the email as the sender, but the email is sent with the sender B written as the sender in the email received.

  Best regards, Michael

  It sounds like you do not use the right smtp server to send the e-mail.

  Please check what 'Sender A' smtp server account uses.
  'Tools' > 'Account settings' for the e-mail account
  or
  Right click on the email account in the folders pane, and then select "settings".
  Lower-right - outgoing (SMTP) server - select the correct SMTP server for that e-mail account.
  See the image below as an aid.
  Click OK

  If you are unsure about what to do please post the following information:

  In Thunderbird

  • Help > troubleshooting information
  • Click on 'copy text to the Clipboard.
  • In the forum, in this issue, right-click in a text box ' Post a reply ' and choose 'paste '.

  Tell me the number of the account which is "sender."
  Tell me the number of the account how recipient sees as venues.

• Firefox sent me an email to my yahoo address and he appeared but yahoo blocks content, so I can't check to finish setting up my account

  finish setting up my new account and I need to check email but yahoo won't show me the contents of the email you sent me so I can not do what the email said to

  Hello, take a look at the header of the email and check if there is an option to unblock it. If this isn't the case, you need to open the e-mail Yahoo (gear top-right) settings and look - probably at the security.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Whenever I type the letter between f and h (he can't come in here or the problem occurs, so I will use 'p' instead), the locking of the keyboard and an informal search screen is displayed in the toolbar. Also happeninp in emails and 'my documents' but no

  I can't use a certain letter on my keyboard when in Firefox, email or my documents without the Freezin' screen and a pop up appears in my toolbar for a brousin site. The character I can not type is the letter between f and h in the alphabet. I have no problem with this letter in other applications, so I know that's not the keyboard. How to make and use this letter?

  This has happened

  Don't know how many times

  Is a week by o

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• Hello! I received an email from this lottery online and microsoft inadvertently sent my details but nothing associated with my bank accounts. Please tell me what should I do then urgently.

  Hello! I received an email from this lottery online and microsoft inadvertently sent my details but nothing associated with my bank accounts. Please tell me what should I do then urgently. This is the info that I looked... To submit your request, please contact your fiduciary agent: = = NAME: Mr. PETERSON JONES PHONE: + 44-701-2981-081. E-mail: * e-mail address is removed from the privacy * = = we recommend you contact your fiduciary agent with the details above in order to avoid unnecessary delays and complications: NAME:-*:-YOUR ADDRESS:-YOUR COUNTRY: - NATIONALITY - YOUR FAX:-NUMBER of PHONE HOME:-MOBILE PHONE NUMBER:-OCCUPATION:-- YOUR AGE - YOUR LUCKY WINNING NUMBER:-E-MAIL: -.

  Hello

  You can check the link below:

  Avoid scams that use the Microsoft name fraudulently

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  Scams by e-mail or web: how to protect yourself

  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  I hope this helps.

• I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask fo

  I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask you to please provide me with the version complete.

  Did you buy the full version or an upgrade?

• I made a mistake in my email address when you first register. How can I fix it because all my emails are sent to an address that doesn't exist and I can't change it.

  I made a mistake in my email address when you first register. How can I fix it because all my emails are sent to an address that doesn't exist and I can't change it.

  Hi Bethany,

  Please check the help below document:

  Change the e-mail address associated with Adobe ID.

  Kind regards

  Sheena

• drop down and depending on your selection, an email is sent

  How to send you a message based on a value is selected from a drop down list?
  
  Thank you
  
  
  Here is an example.
  
  If it's apple then email [email protected]
  a message
  topic: Apple has ordered.
  the message: you have ordered an Apple.
  
  kind of like when you go to the cashier in the Amazon. then a confirmation email is sent to all you?
  
  Here is an example from the drop-down list.
  
  Apple
  or
  Oranges
  or
  Peaches
  
  < FORM METHOD = "POST" ACTION = "nextpage.cfm" >
  < SELECT SIZE = "1" NAME = "Fruit" >
  < OPTION > select an element < / OPTION >
  < OPTION VALUE = "apples" > apples < / OPTION >
  < OPTION VALUE = "oranges" > Oranges < / OPTION >
  < OPTION VALUE = "peaches" > fisheries < / OPTION >
  < / SELECT >
  < INPUT TYPE = "submit" VALUE = "Fruit to submit" >
  < / MAKE >

  On the action page:

  
  Send email
  

• Delay between angle and entered analog on a 6221

  Hello

  my test setup consists of a (8184 current run LabVIEW RT) embedded PXI controller which uses a PXI-6221 of data acquisition. One of the outputs analog of the 6221 creates a demand for speed that is sent to a servo controller. the servo drives then the test configuration. Between the servo and the remaining test configuration, a quadrature encoder is located. Both the 6221 meters are used to measure the position of the servo (using the trains of pulses A and B) as well as the speed of the servo (frequency of A pulse train). In addition to these counter inputs, some analog inputs of the 6221 serve as well to recored the configuration of test signals.

  In this configuration, one of the analog signal has a frequency of n periods per revolution of servo (determined by the mechanical design of the test facility). But when I leave the servo turn to for example 100 rpm, then decelerate from status quo with a constant deceleration and then draw the analog signal against the measured angle, I see clearly that as long as the speed is telling, I n periods per turn (or a passage from my analog AC to zero each 1/2n towers); However, as soon as the slowdown begins, the plot gets stretched along the axis of the angle (so the plot tells me there are less than n analog periods per turn, which is impossible because it would require the mechanical destruction of the facility).
  However, I can calculate a position based on speed information signal, as I got to the second counter (by integration of the speed). When I do this for the above velocity profile and draw the analog signal against the calculated angle, I see exactly n times / revolution, no matter how fast the installation program is rotating (just the expected behavior).

  So, apparently, the speed measured is "in phase" with analog signals, while the measured angle has a "phase error. Draw the angles measured and calculated against the time tells me the same thing: the measured angle is always late (compared to the calculated angle). The period is not constant throughout the measurement; I've seen values between 30 and 170 ms within a single record. Due to this change of variable, inserting a delay for all channels, but the angle is not a great idea.

  Unfortunately, calculation of the position of the speed signal is no option for me, because the direction of rotation is changed during measurement; because speed information I have based simply on a frequency of pulse train, it contains no information management, therefore a calculated position would be unaware of the changes of direction.

  Does anyone have an idea whence thios delay and what I can do to fix this problem?
  Try a position different methods of decoding or exchanging the meter channels has not made a difference.

  Thank you!

  Hey Kevin,

  attached you will find the last block diagram (no new translation this time, since no changes have been made that require a), which includes your last suggestions (explicitly start the task of AI, remove the excess constraints) with a flat sequence structure that applies all the preparations of task to finish before the start of the first task (I know I could have achieved the same effect of intelligent routing of the signal error, but I think the code is) better readable this way).

  Without OPI, LabVIEW tends to start to have, ao and tasks of the angle of the very different moments, which (for some reason that I don't understand - we have a sample clock based calendar here, and the sample clock is run, well after the three mentioned tasks...) tends to cause delays in the order of several 10-100 ms between tasks. With the structure, this problem is eliminated.

  The Sub - VI just above DAQmx writing contains the "conduct" code that I used in the last screen shot to "serialize" the requested speeds - in this way, the table that contains the requirements of speed does not need to be rebuilt.

  The code that creates a weather channel frequency implicitly timed measure left the VI shown here in a second VI that is running on the host computer, because everything that involves a calculation and does not require any intzeraction with the DAQ hardware is better placed there (the 850 MHz on the PXI controller celeton is slower than 2 definitiely something host GHz Dual-Core system).

  The behavior you mentioned for the task "not started" HERE is what wrote using LabVIEW. I thought the block of relaxation that I had at the beginning would treat the start of the task - at least, the code like this figure repeatedly in the examples that come with LabVIEW.

  I don't really understand what has caused the problems I've had - it seems that it was the combination of the measure quickly loop iteration with the start of task based on trigger HERE, but I do not understand what are the mechanisms in the background caused the problem (too forced loop was not the cause; the same block diagram works well with an additional loop timer).

  If the solution was composed of the following steps:

  -remove the old code calculating speed, replace it with a better code out of the main loop. This allows to

  -reduce considerably the frequency of the main loop.

  -Pull the DAQmx writing out of the loop, and

  s ' ensure that all tasks are started explicitly just before the main loop starts to run.

  -Possibly remove excess constraints of the main loop.

• emails not sent to microsoft outlook

  I have not received emails on outlook since July, it's extremely frustrating. I can access my hotmail via the internet, however, prefer to use microsoft outlook. I also began to receive a box requires me to enter my network password.  I walked several times, but the box keeps reappearing every minute.  I have reset my hotmail password and entered it in the box pop up, but it still seems.  I don't have this problem when the mail is delivered for iphone.  The mail has been delivered to my phone, I have not opened, but checked to see if it appears in outlook on my computer, but apparently not. It is strange that it worked perfectly until the beginning of July and all of a sudden nothing.  I've had my iphone for 2 years so don't think what could be the problem.  How can I get my emails sent to outlook and how can I get the annoying pop up box to stop appearing?  If I have to re - setup my e-mail in outlook, I have lost all my emails stored in folders under my Inbox?  Can you confirm the settings, I need a hotmail address to receive/send emails.

  It would be a good question for the experts in a forum of Outlook.

  http://answers.Microsoft.com/en-us/Office/forum/office_2010-outlook

• Photosmart C4480 - sharing between XP and Vista problems

  I have my Photosmart C4480 connected via USB on my desktop running Windows XP. I have a home network set up between the desktop and my laptop running Windows Vista 32-bit. Sharing works files and the computers can succesfully mutually ping no problem.

  I have the printer to share in XP, but Vista does not see the printer on the network. I installed the printer drivers on both computers.

  I know that's not where he's going, but maybe someone will read it. I called the technical support and spent 57 minutes on the phone and got anywhere, not less than 40 of the 57 minutes were spent in complete silence. The only stage of the tech support rep asked me to do is to download the latest drivers on the laptop, but then me has said he did not install. After 57 minutes, he sent me an email with a link to the plug of the printer. He asked me to read him what it says beside 'Connectivity' which of course was USB 2.0. I had already tried to explain once Mr the difference between a printer wireless and a shared printer on a wireless network. Clearly, he never had the image. After reading the option of connectivity USB 2.0 for the guy, he noted that the printer could not be used on any wireless network. So frustrating. Very, very disappointed in HP technical support. Very, very unlikely that I buy another HP product.

  Someone help me please.

  I'll pass by this very detailed and try to think you don't know what you're doing so that the directions are clear and easy for anyone to understand.

  1. you must first install the printer on the computer on which it will be connected to via USB (Windows XP computer in my example). Follow the exact instructions that came with the printer for best results. The directions are simple and clear and the steps must be performed in the order that they advise for a correct installation.

  2. After you have the printer installed and working properly on your computer, the printer is directly connected to via USB, use the installation CD to install all the drivers on the computer you want to access the printer over your home network (Windows Vista computer in my example). When you put the installation provided in this computer CD click on Install or Setup or anything else that is similar in option you are given in the menu. When you get towards the end of the installation, Setup prompts you either to connect the printer to the computer or to continue and complete the installation without connection. You want to complete the installation without the printer connection.

  3. now that you have all the appropriate drivers installed on computers you want to set up your network. On the computer on which the printer directly connected (computer Windows XP in my case), you want to run the Network Setup Wizard to set up the printer share. In Windows XP, you want to click on start > my network places. This will open the my network places window. In this window on the left side, you should see a few options in the section "network management". Click 'set up a home or small business network. This will open the Network Setup Wizard. You will notice that one of the bulleted items listed for what you can do with a network is "share a printer. Follow and complete all the steps in the Network Configuration Wizard. When you are finished, your network must be configured and ready to go.

  4. now you want to turn on sharing the Photosmart C4480. Once more on the computer on which the printer directly connected via USB (once again, the Windows XP computers in my example), you want to click on start > Control Panel > printers and faxes. In this menu, you should see your newly installed Photosmart C4480 printer. Right-click on the printer and select "Properties". This will open the window properties of HP Photosmart C4400 series. You will notice that the window has several tabs at the top. Click on the "Sharing" tab, select "share this printer" and name the printer in the "share name:" text box. Do not the complicated name. I used "HP C4480" for mine. Click 'OK' to close the window and save the changes.

  5. you need to know what the IP address of the computer with the printer connected directly via the USB port, so that we can ensure that your network is configured correctly and that the other computer (Windows Vista in my example) is capable of good communicate with the Windows XP computer. On the Windows XP computer that is connected to the printer, click on start > all programs > Accessories > command prompt. This will open the command prompt window. Type "ipconfig" and press ENTER. This will show you your IP address, subnet mask and default gateway. Note your IP address. There will be a series of four numbers, separated by three points (for example 192.178.1.2). You can close the command prompt window now.

  6. now you know what the name of the computer is on the network. Click the Start button then right-click on "My Computer" and select Properties. This will open the "System Properties" window You will notice that there are several tabs at the top of this window. Select the "Computer name" tab The name of the tab may vary from one computer to another, but there will be a tab named 'Computer name' or 'Network name' or something similar. Select this tab. On this tab, you will see "full computer name:" and then to the right of that will be the name of your computer on the network (the computer DESKTOP for example). Note that. Click 'OK' to close this window.

  7. now you are done on the computer on which the printer directly connected via USB. Get on your other computer (Windows Vista computer in my example). In Windows Vista, click Start > Accessories > command prompt. This will open the command prompt window. Type "ping IP address" and press ENTER. Put your IP (e.g. 192.178.1.2) where I typed "IP address". It tests communication between computers and display the results when the test is performed. If all goes well, it will say something like 4 packets sent, 4 packets received, 0% lost. If packets have been sent but not received then you have a network problem which must be settled before the printer you will work.

  8. assuming that the ping was successful, you are almost finished. Close the command prompt window. Always on the Windows Vista computer (the computer not directly connected to the printer via the USB port), click Start > network. This will open the 'network '. Now your computer will search and display all present on your network. It may take a minute or two so be patient if nothing appears immediately. Finally the name of the other computer should appear (e.g. OFFICE). Double-click the icon above the name of the other computer. This should now show a list of all that on the other computer on the network. The common things to see here are printers and a "SharedDocs" folder You should see that the listed here HP Photosmart C4480. It is listed under the name you gave to the printer in step 4 above. Right-click on the printer icon and select 'connect '.

  9. This will open the "Windows printer Installation" window and says "connecting to the PRINTERNAME on computername. I don't remember exactly what happens the first time you do this, but it can ask you for installation and others. If so, just follow all the steps, it gives you, and he needs to connect to the printer.

  10. at this point, you are ready to go. You should now be able to open Microsoft Word or another program and print on the printer HP Photosmart C4480 from the Windows Vista-based computer on your network. The Photosmart C4480 will very probably not already set as the default printer so you will have to select in the menu of the print window in the "Printer name" drop It can open a window saying that the computer connects to the printer when you do this. After that when you click on print, your document should be sent on the network of the Photosmart C4480.

  11. If you want to set your Photosmart C4480 printer by default on the computer, it is not directly connected to (Windows Vista computer in my example), click Start > Control Panel. This will open the Control Panel window. Under the heading "Hardware and sound", click on "printer".  This will open the Printers window. You should see the "HP Photosmart 4400 series on ComputerName" icon in this window. Right-click on the icon and select "Set as default printer". After that, you should see a green and white check mark next to the icon of the printer. The Photosmart C4480 is now set as default printer on the computer, and whenever you print from any application will automatically be selected Photosmart C4480 printer.

  Hope all that made sense and solves your problems. If you please, after back and let me know if make you it work, or if you have other questions. I'll be more than happy to try to help!