Kanalgruppenerstellung through use

Similar Questions

• can someone ' a Please walk me through doing 3d lettering using phto shop? Thank you!!

  can someone guide me through using 3d lettering? PLEASE, I BEG YOU!

  Click here for the tutorials:

  Google

• Too much spam through the

  We use the virtual appliance, Email Security, version 8.0.7.3273. We had a lot of spam that passes through lately and my boss wants me to fix or we will look for an alternative (he got 6 more just as he spoke to me this morning). I already have all levels of aggression the strongest value, and we trained users on the undesirable declaration that comes through using the Outlook addon tool.

  Now, I'm looking for using the Services of black list feature. I added zen.spamhaus.org and set it to treat all emails coming from sources on the Services of black list as probable Spam. Are there other services from black list recommended that I should add?

  What else can I do to reduce the amount of spam that passes through?

  You must check that you effectively solve the RBL, you choose to use.  In my case the Sonicwall is configured to use the DNS default LAN interface, which is my company DNS server; who uses the DNS servers of my ISP as ther forwarders primary.  Many use Google Public DNS.  In both cases, there are reliability problems to access the various RBL.  It is not a server of DNS Public alpha offering efficient access to all RBL, you could use.

  https://social.technet.Microsoft.com/forums/ProjectServer/en-us/1252eb3d-949c-4cc3-a1d7-dc08f0bdd372/RBL-not-working-on-Exchange-2013-Edge-Transport?Forum=exchangesvrsecuremessaging

  What I've found, is that many ISP/Public DNS Server do not follow the strategies of RBL provider connection limit.  This translates performance very slow to the RBL through the DNS servers of the ISP/Public; leading to RBL expirations on the Sonicwall and other services the customer RBL (in my case as well on the SonicWall) and Exchange Edge Transport.

  For me, the solution was to query the RBL zen.spamhaus.org directly, rather than through my server DNS Public/ISP, using Microsoft DNS "Conditional forwarding" on my company DNS server.  I also use separate conditional forwarder at the other RBL, but use the Google Public DNS as the redirection of DNS server.  Just test one that provides the fastest response.

  https://TechNet.Microsoft.com/en-us/library/cc794735 (v = ws.10) .aspx

• Use FOR... LOOP counter in the treatment of PL/SQL procedures with nest. Table

  Hi all!
  I learn PL/SQL on the book by Steve Bobrovsky (specified below, sample comes from it) and I have a question.
  
  In the procedure of the below specified program used a currentElement integer variable to get the reference to the line in the nested table of data type % ROWTYPE.
  Meanwhile, the program itself uses a common FOR... LOOP counter I have.

  DECLARE
   TYPE partsTable IS TABLE OF parts%ROWTYPE;
   tempParts partsTable := partsTable();
   CURSOR selectedParts IS 
    SELECT * FROM parts ORDER BY id;
   currentPart selectedParts%ROWTYPE;
   currentElement INTEGER;
   PROCEDURE printParts(p_title IN VARCHAR2, p_collection IN partsTable) IS
    BEGIN
     DBMS_OUTPUT.PUT_LINE(' ');
     DBMS_OUTPUT.PUT_LINE(p_title || ' elements: ' || p_collection.COUNT);
     currentElement := p_collection.FIRST;
     FOR i IN 1 .. p_collection.COUNT
     LOOP
      DBMS_OUTPUT.PUT('Element #' || currentElement || ' is ');
       IF tempParts(currentElement).id IS NULL THEN DBMS_OUTPUT.PUT_LINE('an empty element.');
       ELSE DBMS_OUTPUT.PUT_LINE('ID: ' || tempParts(currentElement).id || ' DESCRIPTION: ' || tempParts(currentElement).description);
       END IF;
      currentElement := p_collection.NEXT(currentElement);
     END LOOP;
   END printParts;
  BEGIN
   FOR currentPart IN selectedParts
   LOOP
    tempParts.EXTEND(2);
    tempParts(tempParts.LAST) := currentPart;
   END LOOP;
   printParts('Densely populated', tempParts);
   FOR i IN 1 .. tempParts.COUNT
   LOOP
    IF tempParts(i).id is NULL THEN tempParts.DELETE(i);
    END IF;
   END LOOP;
   FOR i IN 1 .. 50
   LOOP
    DBMS_OUTPUT.PUT('-');
   END LOOP;
   printParts('Sparsely populated', tempParts);
  END;
  /

  When I substituted a global variable of INTEGER type such for... The LOOP counter, an APEX have returned an error "ORA-01403: no data found.

  DECLARE
   TYPE partsTable IS TABLE OF parts%ROWTYPE;
   tempParts partsTable := partsTable();
   CURSOR selectedParts IS 
    SELECT * FROM parts ORDER BY id;
   currentPart selectedParts%ROWTYPE;
   PROCEDURE printParts(p_title IN VARCHAR2, p_collection IN partsTable) IS
    BEGIN
     DBMS_OUTPUT.PUT_LINE(' ');
     DBMS_OUTPUT.PUT_LINE(p_title || ' elements: ' || p_collection.COUNT);
     FOR i IN 1 .. p_collection.COUNT
     LOOP
      DBMS_OUTPUT.PUT('Element is ');
       IF tempParts(i).id IS NULL THEN DBMS_OUTPUT.PUT_LINE('an empty element.');
       ELSE DBMS_OUTPUT.PUT_LINE('ID: ' || tempParts(i).id || ' DESCRIPTION: ' || tempParts(i).description);
       END IF;
     END LOOP;
   END printParts;
  BEGIN
   FOR currentPart IN selectedParts
   LOOP
    tempParts.EXTEND(2);
    tempParts(tempParts.LAST) := currentPart;
   END LOOP;
   printParts('Densely populated', tempParts);
   FOR i IN 1 .. tempParts.COUNT
   LOOP
    IF tempParts(i).id is NULL THEN tempParts.DELETE(i);
    END IF;
   END LOOP;
   FOR i IN 1 .. 50
   LOOP
    DBMS_OUTPUT.PUT('-');
   END LOOP;
   printParts('Sparsely populated', tempParts);
  END;
  /

  When I tried to manage this code in SQL * Plus, the following picture emerged:

  Densely populated elements: 10
  Element is an empty element.
  Element is ID: 1 DESCRIPTION: Fax Machine
  Element is an empty element.
  Element is ID: 2 DESCRIPTION: Copy Machine
  Element is an empty element.
  Element is ID: 3 DESCRIPTION: Laptop PC
  Element is an empty element.
  Element is ID: 4 DESCRIPTION: Desktop PC
  Element is an empty element.
  Element is ID: 5 DESCRIPTION: Scanner
  --------------------------------------------------
  Sparsely populated elements: 5
  DECLARE
  *                                                 
  ERROR at line 1:                                  
  ORA-01403: no data found                          
  ORA-06512: at line 14                             
  ORA-06512: at line 35

  What's not in the code (or what I did not understand)? Help please!

  Your error occurs because you are dealing with a sparsely populated collection and using an index for items that do not exist.

  For collections of the low density of population, you must iterate through using FIRST and THEN as modeled not from 1 to COUNT.

  The crucial difference between your code and the example is:

  tempParts(i)
  

  Which, as you have demonstrated, doesn't work very well (!) if there is no item (i).

  The code example is a little unusual in my opinion.

     currentElement := p_collection.FIRST;
     FOR i IN 1 .. p_collection.COUNT
     LOOP
      ...
      currentElement := p_collection.NEXT(currentElement);
     END LOOP;
  

  It works, but it's an unusual way to iterate through a collection of rare which is perhaps most often done like this:

     currentElement := p_collection.FIRST;
     WHILE(currentElement IS NOT NULL)
     LOOP
      ...
      currentElement := p_collection.NEXT(currentElement);
     END LOOP;
  

  Which is perhaps less open to confusion.

  In the end, the distinction between

  tempParts(currentElement).id
  

  and

  tempParts(i).id
  

  is crucial.

• Problem after update 10.0.2 iOS iPhone touchscreen

  After I have updated to iOS 10.0.2, I noticed a problem with the touch screen. Using the position of the image on the right side, near the corner, the toushscreen does not work.
  For example: when you use the keyboard, I can't type the letter 'P', have trouble typing BACKSPACE. Using the Contacts app, I can't scroll through using the alphabet bar.

  Do what idea of the problem?

  Kind regards!

  Hi fabriciorela,

  Thanks for the upgrade to iOS 10! I understand that the right of your screen is unresponsive to the touch. You can try the steps in this link to fix the problem. If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If it does not help the problem, try to restore the device to factory settings. I would like to backup your important data first.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Please use the Apple Support communities to post your question. Let us know how it turns out. Have a great day.

• Touchpad doesn't scroll - Satellite C850

  My laptop is Satellite C850, windows 7. It worked fine until I deleted some programs (like the spam cleanup). I know not whether that is related to my problem or not. Since then, I can't scroll through using my touchpad and I can't find his equipment or settings. It works well as a mouse to scroll.

  Any help?

  Have you checked all the options of touchpad?
  Make sure that the option of scrolling is enabled correctly.

• How can I reduce reconfiguration time channel between acquisitions HAVE? Thank you

  Hello world

  I need to acquire signals from sin 40 (2000 kHz) at a sampling rate of 250 kech. / s through using a daq card 6225 with its AIs. In order to achieve this sampling rate I must acquire all the samples of the first channel (something like 2000 samples), then the same thing with channel 2,... up to channel 40.  My problem is that I am wasting a lot of time (about 170 ms) whenever I move a channel because Labview reconfigures the channels.

  When I move a channel to acquire samples of 2000 the only parameter that changes is the string that's all.

  I tried many things with the wizard DAQ and Daqmx examples but without success.

  Is there a way to reduce the time between 2 acquisitions... paramating?

  Any help would be great.

  User

  If you insist on the channels one by one, you can not avoid the delay. Of course, you can capture all channels at once. The effective sampling rate would be 6.25 kech. / s, if you did all the 40 at a time.

• Imaging Source DFG/SV1 acquisition card is not correctly recognized in LabVIEW 2009

  I have an Imaging Source DFG/SV1 frame grabber/capture card (I think that this example uses a Bt878 chip) that I am using with LabVIEW 2009 (Fall edition 2009 academic Site license), including elements of acquisition of vision (NEITHER Vision, NOR-IMAQ (4.3) OR-IMAQdx (3.4), etc.). I have all the latest sources of imagery support drivers and software for the Board of Directors (http://www.theimagingsource.com/en_US/products/grabbers/dfgsv1/ drivers: v6.0.3.0, IC Software v2.1 and IC Imaging Control v3.1) with drivers being compatible DirectShow. The DFG/SV1 is detected in MAX under devices NOR-MAQdx / DFG/SV1 / cam0 and I can grab and preview images, however to 320 x 240 resolution, I have a higher resolution camera and know that the jury is capable of greater resolution using IC software manufacturing and also via TWAIN with ImageJ software drivers. Interesteingly, if I try to acquire an image of the card purchase using the Vision Assistant, the DFG/SV1 card is not recognized as a card acquisition, but listed under IEEE 1394 or GigE peripheral, revealing with it being direct device that I can't understand. Despite this I can acquire images, but I am limited to 320 x 240 format and change the type of image (RGB, UYVY etc) causes an error. Once again, oddly enough, I can use "enter and select mode example VI" which should only be compatible with IEEE 1394 cameras.

  I'm not sure why LabVIEW is not seen this card properly, I contacted Imaging source who were also intrigued by the fact.

  Any information on how this could be resolved would be much appreciated.

  Thanks in advance.

  Hi OCastell,

  With this Council Imaging Source, the only interface supported with drivers of NI Vision Acquisition is through using IMAQdx DirectShow interface. It is possible that their DirectShow driver does not properly support all of the capabilities of their Council. Given that ICR software and TWAIN support can be routed to a different implementation of one of the DirectShow support, you can see the different features available. Unfortunately, you probably go through Imaging Source to determine why their DirectShow driver does not support the full resolution. You can confirm that it isn't IMAQdx this limiting trying other software such as Windows NetMeeting or AMCAP DirectShow and see what capture resolutions are listed.

  Because the DirectShow interface is managed by IMAQdx driver, it will not be detected as a framegrabber IMAQ using the IMAQ driver. This is expected since it fits in the same category as firewire and GigE Vision cameras and is supported with the IMAQdx driver instead.

  The "Grab and select the Mode" example VI isn't really specific FireWire, although he was certainly intended to highlight the various video modes that generally expose FireWire cameras. Since the DirectShow devices are similar and have several selectable video modes, it's why he's probably working. In any case, IMAQdx abstracts usually differences between all supported camera types and in general a single VI can run on all cameras IMAQdx-taking in charge unless you rely on buses or the camera-specific features.

  Regarding Vision Assistant marking the camera as 'IEEE 1394 or GigE', I think it's just an aesthetic issue (which may already be fixed in new versions). When IMAQdx was out, these are the supported types of cameras and so Vision Assistant was trying to say clearly what driver was used for the type of device. Now that IMAQdx supports a multitude of new interfaces (including DirectShow and some IP cameras) that the label is inaccurate.

  Finally, looking at the specs for this capture card, it looks like a standard reference BT878/848 model and then you could try potentially replace your Imaging Source driver with one here:

  http://BTWinCap.sourceforge.NET/

  I used this with a with IMAQdx BT878 capture card and can get it to capture an image full resolution (but of course, your results may vary...). It goes without saying that this solution using DirectShow is much more limited than using an industrial camera on 1394/firewire or a framegrabber IMAQ.

  Hope this helps,

  Eric

• The domain name server ( DNS ) is not accessible

  Dear all,
  Need your big help here.
  Currently, I face below Internet connection problem at home.
  For this reason, I am really worried and I am not able to video chat with my family for the last days 6 :(
  Please help me
  In fact, I use a laptop provided the office with Microsoft Windows XP Professional/5.1.2600/SP3
  I use the same laptop at home too. Just do the below
  1 obtain an IP and DNS server address automatically
  2 disable the proxy in LAN setting
  For the last 3 months, it went well. Really not sure what happen last Thursday. The internet does not work at evnthough I am able to connect to the local network.
  I searched on the net (at the office) and followed all the steps below. But the problem still exists
  1. check all cables the same I replaced the new LAN cable
  2. downloaded and run WinsockFix
  3. reset WINSOCK entries
  4 release/renew IP address
  My details:
  Using the connection ETHERNET WIRWED
  1394 net adapt #2 - status (connected, firewalled)
  Intel(r) 82566MM Gigabit Network Connection - status (connected, firewalled)
  Broadcom 802.11a/b/g WLAN - status (connected, firewall)
  C:\Documents and Settings\scfb > IPCONFIG/ALL
  Windows IP configuration
  Name of the host...: San-kartcs
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: kr.standardchartered.com
  Ethernet wireless network connection card:
  State of the media...: Media disconnected
  ... Description: Broadcom 802.11a/b/g WLAN
  Physical address.... : 00-21-00-44-76-F8
  Ethernet connection to the Local network card:
  The connection-specific DNS suffix. : kr.standardchartered.com
  ... Description: Intel(r) 82566MM Gigabit Network Connection
  Physical address.... : 00-1E-68-90-E3-00
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.200.100
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.200.254
  DHCP server...: 192.168.200.254
  DNS servers...: 168.126.63.1.
  Lease obtained...: Monday, December 12, 2011 21:49:36
  End of the lease...: Monday, December 12, 2011 22:49:36
  C:\Documents and Settings\scfb >
  While scnanning services "in Help and support center" from the start menu through "Use tools to view your computer information and diagnose problems" for the diagnosis of network
  . He FAILED in 'network adapters '.
  The Internet (DNS, Domain Name Server) service provider is not available
  Network cards
  DNSServerSearchOrder = 168.126.63.1 (FAILED)
  Ping 168.126.63.1 with 32 bytes of data:
  The inaccessible destination network.
  The inaccessible destination network.
  The inaccessible destination network.
  The inaccessible destination network.
  Ping statistics for 168.126.63.1:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss)
  Time approximate round trip in milli-seconds:
  Minimum = 0ms, Maximum = 0ms, average = 0ms
  Checked all services and seems to be well
  System event COM + (for WZC issues)-getting started
  Computer browser (browser of the computer will start when necessary)
  DHCP client - started automatically
  DNS Client automatically
  Network - started manual connections
  Network Location Awareness - started manual
  Remote procedure (RPC) call - started auto
  Server automatically
  TCP/IP Netbios helper-autostart
  Automatic configuration (XP wireless configuration) wireless
  Autoconfiguration WLAN (Vista wireless configurations) service
  Workstation - auto
  Please suggest me some ideas that will be really useful for me and my family:)

  Hello

  see this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-networking/ICS-XP-Windows7-DNS-server-not-responding/0338b59a-2ffa-4070-BA2E-bd5d847fc8a7

• Series Photosmart Wireless e-all-in-one 110

  I have a Photosmart printer.

  I have windows 8.1 and I can't versteckte. At the beginning, I have windows 7 and then I couldn't versteckte.

  When I use the printer to scan and I choose "Scan to pc" - I have the answer - Scan error: "Scan via the computer or see documentation.

  But I don't know, where I can read the documentation. And I can't scan.

  What I did wrong.

  Hi aftat,

  I see that you have problems using the scanner to the PC option on the front panel of your HP Photosmart B110a, told you "scan via the computer or see the documentation. When you installed this printer you update the software of the printer with Windows 8.1 compatible software and drivers?

  I would like you to take a look here: how Scan: 8.1 Windows, this will guide you through using the HP software to scan as well as without the HP software. Please be sure to read the "Definition of the scanning parameters" section of the document to get up and scan in no time.

  I hope this helps, if you have more questions feel free to ask!

  Thank you

• Virus removal B Fatest

  I have Windows Vista 32 bit and have been affected at once or twice now with the virus b fatest.  Ive managed to come out (I think) once or twice in the past two months using MBAM, MSE, etc, but it seems to me that she is again. BACT ive gone to a restore point a few days ago and my scans are clean now but I was wondering if I am Im still safe. I thought trying to divert it. Ive installed but not yet executed. I thought that I could start a topic here and see if someone can help me.

  Thanks in advance
  Rachel

  Hack this is useful only if you 1st use when you know that there are no viruses, so you can compare cela when you think he is one of spot the differences. If you are not sure that he's gone, and you want to bring out the heavy artillery, try combofix.

  Bleepingcomputer.com, "ComboFix is a program, created by sUBs, which scans your computer for known malware and once found, trying to clean these infections automatically. Besides being able to eliminate a large amount of the most common and current malware, ComboFix displays also a report that can be used by workers trained to remove malware that is not automatically deleted by the program. »

  As says the combofix on the site page, you should probably post in the forums and ask if it's a good idea to run it, and they can talk you through using it because it is quite a powerful program.

• Windows 7 Ultimate is enabled but claims its not authentic, unchanged over the years!

  Lenovo T60, 4 GB RAM, running on a 160 GB SATA drive, finally practically full.  Bought a Seagate 500 GB SSHD, used the Seagate Disk Wizard to clone the drive through using a second hard drive adapter.  Everything went a lot until the clone said that it has not been activated.  Well, got out of the Windows 7 Ultimate package of disks and put in the key, and it validated and activated.  A little later upward appears one Windows may not be authentic, and so I ran the tool MGADiag.EXE results:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - YX8XP - 8HRTW-GM8MP
  Windows product key hash: QoquQ6cNTg1Gbdkd870ErDo2GbU =
  Windows product ID: 00426-OEM-9154243-42443
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {56F3772B-E12B-40C7-BABD-493BF45F2814} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.151019 - 1254
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Outlook 2007-100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Nancy\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.19061], Hr = 0x800b0100

  Other data-->
  Office details: {56F3772B-E12B-40C7-BABD-493BF45F2814}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-GM8MP00426-OEM-9154243-424433S-1-5-21-295262409-1227426759-3493255771LENOVO8743GZULENOVO7IET34WW (1.15)20080716000000.000000 + 000EBF83107018400FA04090409Time(GMT-05:00) Standard is03LENOVOTP-7I 100100Microsoft Office Outlook 2007125D44A95A13ECF14C3clzRNJBpk8H6CWPEtJ5T95KZQ = 81610-906-0843114-622901 100Microsoft Office home and Student 2007128FC7337E9734KpBWq8HtFQayILk0Mk1bA1/H1Lk =81602-922-3355964-688221

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: cfb3e52c-d707-4861-af51-11b27ee6169c
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00182-542-442443-02-1033-7601.0000-0132016
  Installation ID: 008563465401784834500501216095359986806664071552032563
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: GM8MP
  License status: licensed
  Remaining Windows rearm count: 4
  Time to trust: 13/01/2016 23:39:26

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 1:13:2016 23:33
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID hash: MAAAAAEAAwABAAEAAAABAAAAAgABAAEAeqioI2tJ9O5I5D7GWo2IwNQWyBGYqiqF

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TP - 7I
  FACP LENOVO TP - 7I
  HPET LENOVO TP - 7I
  BOOT LENOVO TP - 7I
  MCFG LENOVO TP - 7I
  SSDT LENOVO TP - 7I
  CO-SUBMISSION LENOVO TP - 7I
  TCPA LENOVO TP - 7I
  SLIC LENOVO TP - 7I
  SSDT LENOVO TP - 7I
  SSDT LENOVO TP - 7I
  SSDT LENOVO TP - 7I
  SSDT LENOVO TP - 7I

  Have you tried to check the file system (CFS) Scan and repair the filesystem - Microsoft community ?

  I would also go on the new clone to help startup files Startup Repair.

  Run the Windows Update - Microsoft Windows help troubleshooting tool

  Of reset Windows Update components .

  System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

• Install windows 7 without install disc.

  I know it took a lot, but nobody seems to have a clear answer. FYI I know a bit about computers, so please do not speak for me as I am a noob.

  I need to reinstall windows 7 on my computer, but it did come with an installation disc. And before you say anything that this either on "recovery partitions" my computer isn't any what recovery partition. (I checked) And my hard drive has some problems, so I need one that can be used on a USB key. And before say you "contact the manufacturer" I did. And Toshiba is not any help.

  This is the second time that this has happened. The first time, I contacted someone through using Microsoft chat thing, and after that I told her that I had a product key, it gave me a link to an installer that could be placed on a USB key. Everything was great. The second time, I did the same thing, but the guy began to ask my name, phone number, and he wanted to know what my product code. I was a little unsure about this guy because of some personal issues and his name looked like he was Indian (Indian of the India). I'm not racist, I got once my online identity, stolen by a guy from the India. And why this guy needs all this? The first guy none of it did not. He just asked me if I had a product code, and what version I needed.

  It is important that I get my laptop reinstalled in a week.

  Microsoft no longer offers OEM images for win 7.  You need to find an image for your version from a less reliable source

  Given that Microsoft has removed downloads of digital river you have two equally bad options.

  Microsoft https://support.microsoft.com/kb/326246?wa=wsignin1.0 backup support request 

  Or if you have a retail key (NOT OEM operating system preinstalled) http://www.microsoft.com/en-us/software-recovery 

  You may be better of borrowing a person.  For OEM (preinstalled) you should contact the manufacturer of the computer.

• no option to create a password for my user account

  I put a password on my other account username, but for some reason that I can't put a password on my account. It does not have this option. I can't understand. any ideas?

  Your picture tells me that two action points are missing on your computer: change and remove the password. Why is it I don't know. I suggest that you force your way through using the administrator how to do things:

  1 log in under an administrator account.
  2. click on the start planet.
  3. type cmd.exe in the search box.
  4. press on Ctrl + Shift + Enter
  5. click on "run as Administrator".
  6. type the following command and press ENTER:
  NET user guest1 123456
  (to set the password to 123456)

• Bluescreens sometimes occurs error BUgcheck 1E

  I'm having a problem with a program, Eve Online.

  Sometimes it works fine, but most of the time, it causes my system to blue screen.  It is never something useful in the dumps that I looked through using WhoCrashed.

  I have another problem; my PC flat out REFUSES to do anything about it but the minidumps.  I tried to change it in the advanced system properties and in the registry.  It won't do anything else than the minidumps.

  Hi Noel,

  According to the details given by you, I see you get "KMODE_EXCEPTION_NOT_HANDLED" with Bugcheck code: 0x1E. This error message indicates that an error condition has been detected by the kernel and Windows could not continue running because of this error condition. Please write us with the following details.

  What is the brand and model of your computer?

  I suggest to follow the steps in the link below and check if it helps you.

  Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557408 (v = vs. 85) .aspx

  Make sure that you have installed the latest drivers from the manufacturer's website.

  Let us know the status of the issue.