KB2586448 for IE8 on XP is not applied

Similar Questions

• I tried to install "Shockwave Flash 10.1 r82" for a few months now, but every time I try it is not applied, because when I opened the modules is still the 9.3.4.218 version, but it still says that the installation was displayed as successful?

  As indicated in the question I have a problem with ' Shockwave Flash 10.1 r82. I use the Version of Firefox 3.6.10 on a 64-bit Win7. I tried to install the application for months and without success. Chrome works fine with the same application on the same computer. The problem is the installation is successful, but Firefox does not apply the upgrade file. Why? I don't know, but I'd like to get this figured out. Thank you

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• Cannot install the update for Windows Vista (KB957321), said does not apply

  I was in the middle of the installation of the updates on my computer dell laptop after installing a new hard drive and the os. (windows vista professional)

  I cancelled while it was downloading I was going to start the update process later and in my history of editing I show being cancelled, but not installed successfully. I try to install this update and it is said that this update does not apply to my system. do I need this update? I ran every update that I had to run vista and it has been previously download but

  then I ran SP2 and all updates. Who will be included in updates?

  Hello

  It comes to the installation of vista operating system instance

  link below has information on KB957321

  http://support.Microsoft.com/kb/957321

  for writer windows update for your information system please repost the link below in the windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• WinHlp32.exe for Windows 8 the update does not apply to your system

  I try to install WinHlp32.exe to allow the old program help files can be read, but when I try to run 'Win8-KB917607 - x 64' stops

  with this message "the update does not apply to your system"

  I download the correct file for my PC

  I tried many suggestions that are available on various sites without success

  I ran file system check on prompt without error and tried to re - run the program unsuccessfully.

  I would really appreciate the help

  Thank you

  It seems you must have U.S. English language pack installed and enabled in order for Windows8-RT-KB917607-x 64.msu run. Or there is a replacement winhlp32.exe solution directly. See http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/installing-winhelp32exe-on-windows-8-pro/03c15af2-0402-4098-96d9-6efe2ea2b545 for discussion of these two options.

  Kind regards

  Peter

• I changed my computer; in the former, I installed Adobe Acrobat 7 Pro. I installed the DVD this software in the new computer, the installed software apply for registration, and it is not possible online or by phone because I get an e

  I changed my computer; in the former, I installed Adobe Acrobat 7 Pro. I installed the DVD this software in the new computer, the installed software apply for registration, and it is not possible online or by phone because I get an error message: "Servicio de Activacion not available." I have download the acrobat 7.0 Pro software, following the instructions on the Adobe web site, and I download PPRO_2.0_Ret - NH_ES.zip, but the software has been Adobe Premier Pro, no. Adobe acrobat 7 Pro. How can I use my Adobe Acrobat 7.0 Pro?

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• Why am I wondered documents permission password of PDF files sent by suppliers who have not applied to passwords for them?

  Why am I wondered documents permission password of PDF files sent by suppliers who have not applied to passwords for them?

  These PDF files can be opened in Adobe Acrobat Reader or other PDF readers without password?

• "update does not apply to your system" error when installing Windows Easy Transfer for Vista 32 bit

  I downloaded and tried to install this update from my 32-bit Vista system and has received a notice of error "update does not apply to your system.

  Hello
   
  
  In Windows vista and Windows 7, you don't have to download Windows easy transfer.
  Windows easy transfer is incorporated.
  See the links below:
  
  Transfer files and settings from another computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/transfer-files-and-settings-from-another-computer
  Transferring files and settings: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions

• WS-C3750G-12 s with c3750-ipservicesk9 - mz.122 - 53.SE2 will not apply for route interface map VLAN

  I'm not able to implement a roadmap for an interface VLAN on this three switch layer.

  Switch:

  WS-C3750G-12 S

  IOS:

  C3750-ipservicesk9 - mz.122 - 53.SE2

  Route map Config:

  access-list 151 allow the host ip 10.1.0.11 everything

  !

  TEST allowed 10 route map

  corresponds to the IP 151

  set ip jump following x.x.x.x (Public IP)

  Used command.

  interface VLAN2

  IP route-matches of TEST strategies

  I also do a show run all | I have the interface Vlan 2 and there is no config hidden for this too.  Does not support this version of IOS.

  I suspect it's because your other switches in the stack are not 3750-12s switch?

  3750-12s switch running the model of aggregation by default but all other 3750 s cannot run office model.

  Then on the master can try this-

  "sdm prefer routing Office."

  and then charge again.

  Jon

• Said updated stand-alone Windows Setup program do not apply to this system.

  I tried to download and reinstall the stand-alone windows installer, but get the message that no update available for this system or this download does not apply to this system.  Standalone Installer, I think it's a system XP instead of Vista Home Premium 32 bits of the system. How can I uninstall the stand-alone Windows Installer and install one for Vista?   Is it important that I have a desktop computer that has XP on it?  I also rename the laptop with the Vista program to my name. Is it relevant. I tried to reverse the name

  Hi Rockyakauke25,
   
  Welcome to Microsoft answers community forum!

  This day stanalone you trying to install?

  Try to install the update in safe mode.

  Try to install the update in safe mode and see if you are able to install. Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  To start in safe mode, follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2   , do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  Install the prerequisite updates before applying a new update that is installed sp 1 for a successful installation sp 2.

  See the link for download of SP1 and installation

  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Try to run the system update readiness tool before installing the SP1 or SP2.
   
  The system update tool:
  http://support.Microsoft.com/default.aspx/KB/947821
   
  A software update is available for the Windows Vista installation:
  http://support.Microsoft.com/kb/937287
   
  Then download and install Service Pack 2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
   
  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• IE8 Update won't install - update Cumulative security for IE8 to Windows XP (KB2360131).

  I was alerted to an automatic update titled "Cumulative Security Update for IE8 to Windows XP (KB2360131)."  I think that he has downloaded, but whenever I try to install it, the process fails.  In other words, I click on 'Install', initialization takes place and then it appears the installation, but it fails.  No error code is given, only one window that opens to say "some updates could not be installed."  I see that some 7 and Vista had problems, but does anyone have suggestions for XP SP3?  Thank you.

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons)via Add/Remove programs.

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open IE8 to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. for good measure, also open IE8 (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Fix installation problem: "the update does not apply to your system.

  Greetings and thanks for reading.

  Currently, I am trying to fix a problem of high performance mouse. During the game, the mouse staggers moving (or 'looking', through the mouse) left or right . I tried two different mouse and the problem persists. The mice and their software, both work fine when connected to an XP system.

  By raising the solution, I found this support page that seems to match symptoms more than all other pages (with the solutions, I have already tried) I found: http://support.microsoft.com/default.aspx/kb/932653/en-us?p=1

  The page suggests that a service pack must be installed (already done) and otherwise, to try a fix .

  I got the patch in question, but when trying to apply the patch I am presented with an error message:

  "The update does not apply to your system."

  I understand that this question would happen if I had chosen the bits bad operating system (I chose x 86 for my 32-bit system, rather than the x 64 bit), but I chose the right bit system.

  I wonder how do I overcome this problem during the installation of the hotfix.

  I want to emphasize: I updated all drivers for the system (I had to shell out money for a driver update program because you are looking for that many drivers manually is virtually impossible), including the specific software for the mouse, the firmware of the mouse... None of them solved the problem. This fix may be my only remaining option to fix this mouse and I am unable to continue without help.

  Kind regards
  Luke

  mousesupport12345,
  Please post with the information requested here: what to post in the Windows Update forum

  Explain when you experience the problem.  It is only in the games?  If so, is it all games or only some of them?

  Clean boot your PC then test the mouse and see if the problem persists.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install KB980182 + 17 other updates - error 0x8007371c or "does not apply to this system".

  I am running Vista Home Premium with Service Pack 2, 32-bit. For example, I have the 8.0.6001.18828 version. I use AVAST AV and Comodo Firewall. I've never had McAfee.

  I have 18 'Important' Windows Vista updates will not be installed: several updates, several windows Vista updates, etc. Back to 08/12/09 and 27/04/10 the most recent. They start to add up. Here is a screenshot of them:

  http://img94.imageshack.us/img94/5003/updatesl.PNG

  For about 11 of them, let's say in the meantime (until restarted), but then after the resumption, that they do not have to install but have no error code. The event viewer indicates that they are 'not applicable for this system' (then why they have been downloaded?). Who does not apply are: KB905866 KB971468, KB972270 KB979683 KB978601, KB977816, KB978338, KB979099, KB974318, KB980248, KB980232.

  The rest of them, as (for example, KB980182) will fail because of an error of 8007371 C. In Event Viewer, they all have a sequence of error similar to this one (it's for KB980182):

  ###

  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-39_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-38_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-37_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-2_neutral_GDR of packaging KB980182 (Update) in Staged (Staged) State
  ...
  [several other of these errors, with '2' to 36, even numbers only]
  ...
  11:11 - Installation failure: Windows failed to install the following update with error 0x8007371c: Cumulative security update for Internet Explorer 8 for Windows Vista (KB980182).

  ###

  Things I've tried:

  1. installation after a clean boot - at first, seems to be successful that I can get the list to the left of 1 or 2, but at some point given shortly after they all reappear.

  2A ran the System File Checker that comes up: "Windows Resource Protection has not found any breach of integrity."

  3 reset Windows Update components (manually or with the "FixIt" solution to http://support.microsoft.com/default.aspx/kb/971058?p=1)

  4. stop of services related to Windows Update, rename system folders, saving and then associated DLL files by restarting services (as described here: http://social.answers.microsoft.com/Forums/en/vistainstall/thread/ed275467-5580-41dc-9ccc-3c1e22c6fd28)-same result

  5 install in safe mode - gives me "Setup has encountered an error: 0x8007043c.» This service cannot be started in safe mode. »)

  6. scan the hard disk for errors (e.g., check disc) - Nothing found

  7. search for viruses, Trojans and malware - do not have

  8. install with UAC, anti-virus and firewall off the coast - same result

  9 install the upgrade preparation tool system for Windows Vista (KB947821) [January 2010] (with UAC, AV, etc off), but the installation 'failed' (no error code). Installation in safe mode it gives me the «...» "0x8007043c. this service cannot be started in safe mode."

  10. manually install them - same result

  A short circuit contact MS have exhausted the options?

  Thank you. This is not a beta or Release Candidate build both fuhgeddaboutit and open a free support incident.

  PS: I think you will find that the updates are not installed due to infection hijackware, Kurt.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The update does not apply to your system

  I can't run the help files which require winhlp32.exe. while I was trying to install the same.but I get the message that the update does not apply to your system,

  I use windows vista SP2 32 bit.

  Thank you

  Ankit,
  Here is an article about getting the winhlp32.exe for Vista. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error updating Win7 for IE8 - "WindowsUpdate_800705AA" "WindowsUpdate_dt000" - won't install the update

  Win7 always tells me to install an update that is not.
  "WindowsUpdate_800705AA" "WindowsUpdate_dt000"

  The update is:
  Cumulative Security Update for IE8 for Windows 7.

  I can install any update but this one.

  I rarely use IE8. Any ideas?

  800705AA - ERROR_NO_SYSTEM_RESOURCE
  The pagefile is too small for this operation ends

  See the section "How to get help" of http://support.microsoft.com/kb/976325

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft