KB2686509 with 0x8007f0f4 and prerequisites required warning error code.

Similar Questions

• Problem with Audio and cannot restore. Error code 0 x 80070002.

  Have a Gateway FX 6860 under Windows 7 Home Premium.  Audio worked fine in the morning but in the afternoon (no updates being installed), I noticed that the sound speaker in the start bar had a red X.  Thought I had cut the sound, but the button mute on the keyboard had no effect (any more than the volume upward or down keys).  Roll the mouse on the icon gives "no speakers or headphones are connected.  Tried researching this issue after trying to restore the system (System Restore did not complete with each available computer restore point was [gave me every time the error code 80070002 x 0]).  I tried to uninstall and reinstall the device driver (no effect), I tried my repair disc (nothing), run a sfc/scannow (results indicate that there is no corrupted files).  I have connected my ipad for output wire to test the speakers (integrated in HP 2009 monitor) to check the wiring and speakers (they worked).  I ran the antivirus (AVASTI) software with no results.  Before that I have to empty everything and recover the system; is there anything else I could try?  Don't want to go through the entire re - install everything systematics for something simple.  What I forget?

  Hello

  Thank you for the update.

  You can try to install the drivers from the link below and see if that helps.

  Driver downloads &

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  If this does not help then, try to perform the disk check and see if that helps. Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right-click cmd, and then click on run as administrator.

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to do restore and check the result.

  For more information on 'Check a drive for errors' please visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• When I try to access utility 'defrag' from Microsoft, a link to "Diskeeper" is everything that happens with download and purchase required.

  When I try to access utility 'defrag' from Microsoft, a link to "Diskeeper" is everything that happens with download and purchase required.  What is an intrusion to avoid?  It is possible to access the Microsoft defrag utility?

  Glen, have you ever tried to download Diskeeper?

  If so, he may have added something on your computer for access to defragment.

  You're going to start > all programs > Accessories > system tools > Disk Defragmenter and obtaining the pop-up window?

  Check in Add/Remove programs and see if something diskeeper is installed then uninstall it.

  Post back with more information, make and model of the pc, current anti-virus, browser and operating system and the service pack.

  also:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  After back with the results.

• I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

  I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

  You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

  Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

  Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  Gene

• I tried to install since 11/12/09 important update KB976098 and continue to get error code 8E5E03FB unknown error. I tried to find the error code, but can't find it. How can I download and install this update?

  I tried to install since 11/12/09 important update KB976098 and continue to get error code 8E5E03FB unknown error.  I tried to find the error code, but can't find it.  How can I download and install this update?

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really need not to install this security update not any way so you can hide it just ("don't show me this update"). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA

  Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009.  This support now will cost $59 us $ (or more) per incident.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A__

  I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A

  I have install the 2007 Microsoft Office Suite Service Pack 2

  I bet that if you check the size of the file that has been downloaded it will be probably very small, indicating that it was not downloaded correctly.

  I don't think you have another computer at hand, or a friend with a USB key which may be able to download and copy it for you?  Maybe burn it to a CD or something.

  I could download it and save it to my desktop so I am confident that it is not a problem with the link itself or the file is available for download with success.

  I know this isn't a very good suggestion, but the only other option would be to challenge support and see if a technician can take control of your machine and see if they can solve the problem of internet explore.

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• I tried to download Skype and I get an error code 1601.

  Problems with windows install?

  I tried to download Skype and I get an error code 1601. It says something about the installer of windows and something I need to fix. Does anyone else have this problem and know how to solve?

  Hello

  1. is the issue limited only to Skype?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft fixit from the link below.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Check the type of Windows Installer Service

  (a) cliquer click on Start, in start Search box, type services.msc and press to enter.

  (b) scroll through and find the Windows Installer Service.

  (c) double-click the Windows Installerservice.

  (d) check the value in the Startup type field. If it is currently set to Disabled, select the Manual option in the menu drop-down.

  (e) ensure that the service is started and set to Manual.

  (f) click on Exit.

  Method 3:

  Unregister and re-register Windows Installer.

  (a) click on Start, run type in the start search box.

  (b) in the run box, type msiexec /unreg, and then press ENTER. This will cancel the registration of the Windows Installer.

  (c) in the run box, type msiexec/regserver , and then press ENTER. That you re-register Windows Installer.

   

  Method 4:

  Put the computer to boot and then try to install Skype.

  http://support.Microsoft.com/kb/929135

  NOTE: after you perform the troubleshooting steps, return to the computer to start as usual (see step 7 link mentioned above)

• I get a pop-up with Win32NT - 6.1.7600.0 error code.

  I get a pop-up with Win32NT - 6.1.7600.0 error code. I'm trying to load a print driver (HP CP1525nw) from the cd. Each time, he says that there was a problem, restart and try again. Help!

  original title: Win32NT - 6.1.7600.0

  Michael

  Is your Windows 7 32-bit or 64-bit?

  If 64-bit, try to download the latest device driver for your printer from

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4052980

• try to install windows in a new driver and gave me the error code 0 x 80070017

  Original title: install windows in a new driver

  try to install windows in a new driver and gave me an error code 0 x 80070017 Windows vista the hd is brand new, what I am doing wrong

  Hello

  Here's how to clean install vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

  Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

  Hey Rodney,
   
  To resolve this issue, follow these steps:
  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
  3. press y when you are prompted to check the drive the next time the system restarts.
  4. close all applications and restart the computer.
  Note: When you restart, Windows checks the drive for errors, and then Windows starts.
  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
   
  For more information, see this article: http://support.microsoft.com/kb/952272
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Windows Live Photo Gallery. error: Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. Error code 0 x 80070015.

  original title: error code 0 x 80070015

  I have recently installed Windows Live Essentials 2011, and since then, I have been unable to open the .jpg files in Windows Live Photo Gallery.

  I get the following message:

  Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. Error code 0 x 80070015.

  Any help would be appreciated.

  see you soon

  Dan

  Download and install this

  http://explore.live.com/Windows-Live-Photo-Gallery?OS=other

  If this post answers your question, click mark as answer .

• Backup fails and displays the 0x800706BA error code

  My computer fails to complete each backup and displays a 0x800706BA error code.

  Hi Doyle,

  Thanks for posting your question in the Microsoft community.

  I understand that you encounter the error 0x800706BA. While trying to back up your Windows 7 computer. Let us know if this is incorrect. We could analyze and better understand the question if you could answer these questions.

  1. You use the Windows backup and restore utility or a third party software?
  2. You did changes to the computer before the show?

  I'm here to help you and suggest you these methods to solve the problem.

  Method 1:

  Check that DCOM (Distributed COM) is enabled on the PC.

  1. Click Start
  2. Type dcomcnfg.exe in the search box
  3. Open and browse to Component Services > computers.
  4. Right click on "Computer" and select Properties.
  5. Go to the 'Default properties' tab, check the box "Enable Distributed COM on this computer",
  6. Click OK, and then restart the PC.

  Method 2:

  Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  For reference:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Let us know if you have any difficulties or any other issue.

• Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Migration of CS4 breaks the license. That's what 150:30 means. Assuming you are using a Mac.

  You can use the Terminal method to repair the license... but I stress that carefully read you and understand the instructions here before you run it. beginning

  # 11. https://forums.Adobe.com/thread/1714695

  If this isn't what you want to do, you have to reinstall.

  Gene