KB976932 SP1 download

Similar Questions

• The CVI 2010 SP1 download link works?

  The downloaded file from SP1 link seems to be the unserviced pack version. After the 'install' which took place much too quickly, the help > about shows LW/CVI 2010 Version 10.0.0 (360). Am I missing something or am I just too early?

  Hello

  There has recently been some changes made to the experience of downloading on ni.com.  To get the latest download for the ICB, please visit ni.com/downloads.  There you should find the LabWindows/CVI 2010 SP1 download.

  Let me know if you have any problems,

  NickB

  National Instruments

• updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  Hello

  I understand that you are warned to install the update even repeatedly. I'll be happy to help you with this problem.

  (1) did you do changes on the computer before this problem?

  (2) you have Service Pack 1 installed on your computer successfully?

  (3) are you advised to re - install the Service Pack 1 update again?

  (4) you receive an error message when you try to install Service Pack 1?

  Method 1: I suggest you run Microsoft FIXIT from the link and if the problem persists.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2: I also suggest you to follow the steps from the link and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  For reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Where can I find XP Pro SP1 download / ISO?

  Where can I find XP Pro SP1?  I had to recreate the image on my old PC with my licensed copy of XP Pro comes with the Dell PC and upgrade to SP3 (if any).  Download within Microsoft maintains a server of http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106afailed.

  Thanks in advance for anyone's help.

  Jeff

  More info for you, my friend...

  When you perform a clean installation of XP Pro, using a brand Dell XP Pro Installation CD (RTM or SP0), you must also all the correct drivers for this PC. If you want or need the latest drivers, go here to enter your Service, and you will see what you need:
  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection
  (In fact, it will be more that you need. All you really need are DRIVERS for the chipset, network, graphics and audio)
  Or if you use some kind of restoration (from a CD or the hidden hard drive partition)? If so, you will not need drivers, but you'll definitely want to uninstall all of the programs of the trial!
  I recommend that you download these (and other necessary) files to a USB flash drive.
  And here is a link to very detailed instructions on how to perform a clean installation of XP Pro:
  http://www.windowsxpprofessional.WindowsReinstall.com/installxpcdoldhdd/indexfullpage.htm
  Be careful! You don't want to end up wasting your time to perform a parallel installation.
  And here are the tips that still work for me:

  1. download the installation of SP2, SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  (Avast and MSE are also very good.)

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4. install SP2. Restart TWICE.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Help with Windows Vista SP1 download

  Hello

  I am a user of Windows Vista Home Basic Edition. My machine is running on 32-bit architecture. I want to upgrade to SP2, but it says that I should install SP1 before SP2. I downloaded a file on the microsoft site, but it gives an error message. Please give me the link to download Vista SP1 32-bit and also tell me what are the updates available for Windows Vista.

  Error code: 0 x 80070002. See http://go.microsoft.com/fwlink/?LinkId=101139 for more details.

  Thank you

  Ankit chikh

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• SP1 download over and over

  For some reason any my SP1 makes me download it over and over again.  Why is this?

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  According to what MS you have installed, follow these steps:

  Choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Impossible to download XP Professional SP1

  I tried to install SP3 on my Dell Dimension E310 but received an error message that says that I need to first install SP1. Recently just wiped and reinstalled XP Professional. (I searched for SP1 and found what is called SP1a. Download and try to install SP1a, I get an error message saying that "the server name or address could not be resolved"... it is said also if this problem persists after retry several times, I should go to the Windows XP Service Pack Web site and look for "Problems loading the Service Pack" who will give me instructions on how to download a version of MS does not require an Internet connection during installation. I don't find it to save my life. The Dell not currently has access to the Internet (another problem, I need to fix) any ideas? Thank you.

  Have you tried Windows Update?  This is the normal way.  I found some other ways to

  http://www.bing.com/search?q=Windows+XP+SP1+download&form=MO0011

  I hope this helps.  Good luck.

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Error: The program cannot start because sqmapi.dll is missing on your computer. Try reinstalling the program to fix this problem. (Unable to install SP1)

  What is Spinstall.exe

  I can't install windows SP1 "the program can't start because sqmapi.dll is missing on your computer. Try reinstalling the program to fix this problem. »
  How can I fix?

  First of all, please see - How to use the tool File Checker system to resolve missing or damaged on Windows Vista or Windows 7 system files

  If execution of the System File Checker does not have the Service Pack Setup error, then suggest that you Configure the system to boot before attempting to apply SP1 to exclude interference from 3rd party software - How to solve a problem by performing a boot in Windows Vista or in Windows 7

  You can also try to download and save the full, stand-alone SP1 package, create a new folder on the root drive (the drive where Windows is installed on, usually C:\), name the SP folder, and then move the SP1 downloaded & saved in this folder.
  Configure the system to boot, then try another attempt at installation of SP1.

  The full, stand-alone SP1 packages can be downloaded and saved this page-

  Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)

  Click on the button continue to validate Windows 7, and then click the download in the download for your system architecture (Windows6. 1 - KB976932 - X 86 .exe or Windows6. 1 - KB976932 - X 64 .exe) to start the download.

  If no joy, contact Microsoft for assistance to get SP1 installed
  https://support.Microsoft.com/OAS/default.aspx?Gprid=14019&St=1

  Launch the request for assistance by clicking on the edition of Windows 7 is installed.

• "0xc01a001d (\Registry\Machine\COMPONENTS\DerivedData...). Error while installing Vista SP1, WITH RESTORATION or BACKUP ACCESS FORBIDDEN! ANY CHANCE OF HEALING?

  I rebooted several times Vista since Vista SP1 download.  I tried to get my system prepared for a Boot (as several vital Programs are not yet supported) double Win7.  I keep getting stuck on the "0xc01a001d? / 99216 (\Registry\Machine\COMPONENTS\DerivedData... "error.

  I have saved on an external USB hard disk and do not have the original system disks.

  I downloaded the Vista recovery disk.  On all options, he said that I could not restore.  He could not read the USB key to find the backup point.  He would not even install when I tried to reinstall.

  Y at - it a help to me.  I am a student and can get another copy of Vista from MSDNAA but would go instead by the download time intensive task, to find drivers on the Dell Web site (I have an Inspiron 1501) and reloading everything.

  ALL BOARDS

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Vista.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista pushed downloads killed my computer

  Hello
  Can someone help me revive my computer? Vista downloads nine weeks 2 day ago from Microsoft killed my computer, it will not load windows more I turn it on and it goes to a screen of emachines in a repair of your computer screen, I select Safe mode and then he died.

  I had to load once in safe mode, ran virus scan to make sure that no virus, SP1 downloaded, arrived at the phase 3 installation to 48%, then he dies and does not load again. I downloaded a Vista repair disc, put it in the PC, it displays the service pack to 48% screen and gain matrices. What can I do?

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• V. ultimate language download offering not languages after a clean install of the operating system and install live SP2

  After a new installation of Vista 64 Ultimate w/SP1, download and install SP2.  Several updates auto installed without problem, but the languages other than English are not being offered as if they were on the previous installation.  I have deparately need to install one of them.
  How can I get the update to bring me languages?  MUI, I think they are.

  Microsoft said that SP2 with full language support will not be available until later.

  I suspect that this is your problem.

  http://TechNet.Microsoft.com/en-us/library/dd335038.aspx

  «Microsoft will release five languages (English, German, Spanish, French and Japanese in the first version) and a set of additional languages 31 in a second wave sometime after the first version.»

  Microsoft partner

• Windows XP SP1 or SP2

  I re-formated my PC and reinstalled Windows XP of origin. A sine qua non for Svce Pack 3 is SP1 or SP2.  SP1 downloads, but during the installation, meets a non-server response MS. SP2 download, but cannot be installed because it is a corrupted file. Can anyone offer advice?

  I re-formated my PC and reinstalled Windows XP of origin. A sine qua non for Svce Pack 3 is SP1 or SP2.  SP1 downloads, but during the installation, meets a non-server response MS. SP2 download, but cannot be installed because it is a corrupted file. Can anyone offer advice?

  [points out: you can get best results uploading the SPs and IE installers on another computer and then transfer them via USB stick or any other means to the computer in question.]
   
  [pointing aside: do not forget to download all the drivers for hardware device suitable for the hardware inside the computer and install them as well.]  [Network, audio and video card motherboard chipset come to mind.]
   
  Uninstall Internet Explorer 8 and Internet Explorer 7--> you back all the way back to Internet Explorer 6 before continuing (if necessary).
   
  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
   
  Install it.
   
  Then restart at least a couple of times for a few minutes between each restart.
   
  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
   
  Install it.
   
  Then restart at least a couple of times for a few minutes between each restart.
   
  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).
   
  Install it.
   
  Reset.
   
  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.
   
  Come back and let us know how things will go.

• Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:

  WinVer the OS details appear. If no SP1, download & install it

  https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx

  Use this link for download.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista

  This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'

  Microsoft.

• Vista SP1 seems to load but is not listed on installed updates or recognized by other programs

  I get a problem with Vista.  I had to restore to factory settings and loaded the more updated with the exception of SP1.  When I try to load it, I quickly get a message that the installation was successful, but SP1 is not listed on my installed updates and any application that needs it asks me to load it.  I tried MS Fix It nothing works.  I have therefore to be installed, but it is not recognized as installed, or there is not installation despite the message from Windows Update to a successful installation.  Any ideas on how to fix?

  Thank you very much!

  I get a problem with Vista.  I had to restore to factory settings and loaded the more updated with the exception of SP1.  When I try to load it, I quickly get a message that the installation was successful, but SP1 is not listed on my installed updates and any application that needs it asks me to load it.  I tried MS Fix It nothing works.  I have therefore to be installed, but it is not recognized as installed, or there is not installation despite the message from Windows Update to a successful installation.  Any ideas on how to fix?

  Thank you very much!

  First - make sure you have the latest drivers for hardware device downloaded and installed on your computer manufacturer's website.

  Then...

  Download and SAVE the SP1 for your computer somewhere, you can find it after a reboot.

  • Windows Vista Service Pack 1 five language standalone for x 86 (Kb936330)
  • Windows Vista Service Pack 1 five language standalone for x 64 (Kb936330)

  Also download and SAVE the SP2 suitable for your computer somewhere, you can find it after a reboot.

  • Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2 - stand-alone version ALL languages for x 86 based systems (KB948465)
  • Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2 - stand-alone version ALL languages for x 64 systems (KB948465)

  Reset.

  Right-click on the SP1 download and choose Run as administrator (if logged in as an administrator.)  Follow the instructions until it concludes and restart.  Open a session.  Wait a few minutes.  Reboot again.

  Right-click on the SP2 download and choose Run as administrator (if logged in as an administrator.) Follow the instructions until it concludes and restart. Open a session. Wait a few minutes. Reboot again.

  Then use this:
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  find out if you have installed SP2.