Keep getting error code 19
This is the message that I get even after I uninstalled the device and restarted the laptop. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "the device name is HL-DT-ST DVDRAM GT20N ATA Device.
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712. I tried to follow the directions on the site by running the system preparation tool update... did not work. Then I tried to go back to a restore point and try the update again. Yet once, didn't. I went back several restore points, but it has always failed. I don't have an installation DVD, because it came with Vista preloaded.
Help?
PaulS22401,
Walk through the steps described in this article: http://support.microsoft.com/kb/957310Let us know the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cannot install update kb971486 keep getting error code 80072EE2
Cannot install update kb971486 keep getting error code 80072EE2
Visit this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2Otherwise, try to reset Windows Update components:
http://support.Microsoft.com/kb/971058 -
Update of security KB2686509 keep getting error code 0x8007FOF4
I'm having problems trying to download XP security update KB2686509 keep getting error code 0x8007FOF4 can anyone help me with this?
You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site
http://support.Microsoft.com/kb/958051>
UTC/GMT is 12:56 Wednesday, July 25, 2012
-
I keep getting error code U44M1I210 even after manually install Camera Raw 9.5, what can be the problem?
U44M1I210 - creative cloud help / error U44M1I210 | Install the updates:
http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html
-
I can't install programs. I have XP Professional 32-bit. When I try to update DirectX, I get error messages like "Program has failed the integrity Scan" or he said: he did not like a piece of furniture, or a file in the program has been corrupted. When I try to install Adobe Reader, it stops with error code 13042 and wrote that a program interrupted the installation. I have done 3 installs own to solve these problems, but they continue to flow upward. Validation always works very well. But even some other microsoft programs will not properly download. How can I fix them?
Hello
· What is the number and the model of the computer?
· What is the service pack installed on the computer?
Check out the links below and try the same thing no and check if this may help: installation of Flash Player error: "download failed the integrity check (16236.304.443)": http://kb2.adobe.com/cps/512/cpsid_51258.html
Description and explanation of a CAB file: http://support.microsoft.com/kb/310435
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651
-
I keep getting error code 643 what's wrong! . NET FRAMEWORK 1.1 SERVICE PACK 1
Is there a quick fix?
Uninstall all the framework & reinstalled tried to install always the same error code 643.
Help!
Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.
When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
http://support.Microsoft.com/kb/976982Step #1 => foremost, note what version of .NET Framework is installed:
How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
http://msdn.Microsoft.com/en-us/KB/kb00318785.aspxStep #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100
After running the cleaning of .NET Framework (not the Windows Installer Cleanup utility) tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.
NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.
IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:
1. the .net framework 3.5, then...
2 .net framework 1.1, then...
3 .net framework 1.1 SP1NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx. Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.
Step #3 => Check-in at Windows Update and install the critical updates of security offered.
=========================
What to do if other .NET Framework configuration troubleshooting procedures do not help:
http://blogs.msdn.com/astebner/archive/2008/03/07/8108332.aspx~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
the problem began with frequent blue screens, and then a few updates for SP1 and SP2
Are you using Vista?
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 for Vista - step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed. http://support.Microsoft.com/kb/948537
Uninstall SP1
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
get error codes; STOP: 0X0000008E
Original title: keep getting error codes
I get a blue screen that says STOP: 0x0000008E, (0 x 80526476, 0xA9577C28, 0x00000000 whenever I turn on the computer I need help please)
Hi emikikmybenisa,
(1) since when are you facing this problem?
(2) remember to make changes to the computer?
Error message Stop is normally caused due to hardware problem. I suggest you try the following steps:
Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
Step 2: You can follow the steps mentioned in the articles below which deals with a similar question
You receive a random "0x0000008E" error message on a blue screen in Windows XP
http://support.Microsoft.com/kb/827663
General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"
http://support.Microsoft.com/kb/945658/
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I can't download anything I get error code 80072efe window update dt000
why I can not down load anything keep getting error code 80072efe window update dt000 can you tell me how to solve this problem, so I can down load updates
Ensure that there is no hidden malware that causes the connection to the update servers is abandoned.
How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?If no hidden malware has been detected, it is the first time that this error updated?
If the answer is Yes, then try reset components Windows Updates - How to reset the Windows Update components?
Download and save the Fixit on the web page above. Once the download is complete, close all open programs and browsers.
Now run MicrosoftFixit50202.msi and choose it is the default mode.
When he has finished to see if running Windows Update can search, detect, download and install the updates.If no joy, run the Fixit once more and choose it's aggressive mode.
Restart once it has finished running and see if the system can update now.If the system can always refresh not, then please copy and paste the last lines of 50 or more WindowsUpdate.log in your response - How to read the Windowsupdate.log file
-
I keep getting error code KB70653 every time my updates of the system, don't know what it means
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Cannot install KB2653956 get error code 80071aa7
Every day that I get a message that I need to install update KB2653956. I have download and restart my computer, but it goes back to the previous settings when you set up. Then, I get error code 80071aa7 when it fails. I tried the Mr FixIt, reset Windows Update, disable my antivirus and firewall and I always get a reminder to install the update. Someone at - it ideas?
Hello
Method 1:
I also suggest you go through the steps mentioned in the link and the Coachman.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Method 3:
If the steps do not help, I you suggest to perform a clean boot and then try to install the update manually.
Step 1:
Clean boot helps eliminate software conflicts.
Follow the steps mentioned in the article below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.
Step 2:
You can download the update manually from the link below.
MS12-024: vulnerability in Windows could allow remote code execution: April 10, 2012
http://support.Microsoft.com/kb/2653956
Hope this helps and keep us posted.
-
Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100
original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100
My checksur.log said
=================================Preparation of control system was updated.Binary version 6.0.6002.22441Version 9.0 package2011-06-29 15:32Checking Windows Service PackagesChecking of manifests package and catalogs(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: namChecking package WatchlistWatchlist checkingChecking packagesControl components storeHello
These should help to resolve the problem:
How to fix Windows Vista error 800b0100 update
http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/Error Code 800b0100 in Windows Update
http://www.instantvista.com/800B0100.htmlError message when you try to use Microsoft Update or Windows Update Web sites to install
updates: "0x800B0100.
http://support.Microsoft.com/kb/956702
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821==========================================================================
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366You select Download - SAVE? After download go where you put it and right click
on and RUN as administrator.Download Service Pack 2 x 86 32 bit
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = inDownload Service Pack 2 x 64 64-bit
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = inCreate a new ADMIN account with your password - same then REBOOT (do not logoff) and
log on to the new account and try the download.How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791/Service Pack Center
http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs================================================================
If necessary, you can get free reports of incidents however generally above allows to solve this problem.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
When I try to download the updates I get error Code 800 B 010 & error Code 66
Original title: I Keep Getting error 800B 010
-----
When I try to download the Dates, I get error Code 800 B 010 & error Code 66Hey, Joe Zerilli,
1. you remember to make changes to the computer before this problem?
Step 1:
You can check the following link and try to run the system update readiness tool and check:
Windows Update error 800b0100
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100
Step 2:
You can also read the following article and try to reset the Windows Update components and check.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Hope this information is useful.
-
Get error Code 12 as he tried to use the ExpressCard 8360 VXI card
Dell XPS M1530 laptop computer using, under Win XP SP3. Everything went very well with the same material in September 08. Now, I am getting error Code 12, "this device cannot find enough free resources that can be used. (Code 12) ». I tried disabling other devices in my laptop as the large map broadband and media without change in the symptom slot. Is there a better way to understand what is happening and to restore my computer to work with the MXIExpress card?
Maybe you are looking for
-
Video card update on the s5-1414 beep problem
Hello, I inserted an Asus GT610-sl-1gd3-L video card in the PCI slot, but when I turn on the machine I get beeps and the GET no video on the monitor. It's a whole new card. I leave the care and it is eaten in fine. I tried to connect the dvi on the
-
Satellite Pro A300-195: Realtek 8187 B Wlan driver and driver of Smartphone problem
I have a Satellite Pro A300-195, running a card wireless Realtek 8187 B and Windows XP Professional. It was working fine until yesterday, when I installed the drivers for my new Samsung Galaxy S2. Now, I can access the internet if I connect to my lap
-
black screen in the game with sounds to play
Hello I have a hp pavilion 15-n055tx with amd radeon hd m 8670, when I try to play the call of the game begins duty 4 without vedio but the sounds play. I can even hear the sounds of the menu when I move the mouse.
-
Hello. Two years ago, I bought a HP envy m6-1125DX so its not in warranty. I ran a diagnostic hard drive recently and it failed. Hard drive long DST failure, short check DST and check Optimzed dst all failed. The ID of the failure are folling 06D6L8
-
I get pasta spread instead of pages on insert of Pages
How is it that in some texts when I ask to insert Pages, instead I get pages attached in the form of spreads multiple? I want to just insert a number of pages after that a chosen page spread and not make a 10 page spread!